linux/drivers/thermal/hisi_thermal.c

485 lines
11 KiB
C
Raw Normal View History

/*
* Hisilicon thermal sensor driver
*
* Copyright (c) 2014-2015 Hisilicon Limited.
* Copyright (c) 2014-2015 Linaro Limited.
*
* Xinwei Kong <kong.kongxinwei@hisilicon.com>
* Leo Yan <leo.yan@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include "thermal_core.h"
#define TEMP0_LAG (0x0)
#define TEMP0_TH (0x4)
#define TEMP0_RST_TH (0x8)
#define TEMP0_CFG (0xC)
#define TEMP0_CFG_SS_MSK (0xF000)
#define TEMP0_CFG_HDAK_MSK (0x30)
#define TEMP0_EN (0x10)
#define TEMP0_INT_EN (0x14)
#define TEMP0_INT_CLR (0x18)
#define TEMP0_RST_MSK (0x1C)
#define TEMP0_VALUE (0x28)
#define HISI_TEMP_BASE (-60000)
#define HISI_TEMP_RESET (100000)
#define HISI_TEMP_STEP (784)
#define HISI_MAX_SENSORS 4
#define HISI_DEFAULT_SENSOR 2
struct hisi_thermal_sensor {
struct hisi_thermal_data *thermal;
struct thermal_zone_device *tzd;
long sensor_temp;
uint32_t id;
uint32_t thres_temp;
};
struct hisi_thermal_data {
struct mutex thermal_lock; /* protects register data */
struct platform_device *pdev;
struct clk *clk;
struct hisi_thermal_sensor sensors;
int irq;
bool irq_enabled;
void __iomem *regs;
};
/*
* The temperature computation on the tsensor is as follow:
* Unit: millidegree Celsius
* Step: 255/200 (0.7843)
* Temperature base: -60°C
*
* The register is programmed in temperature steps, every step is 784
* millidegree and begins at -60 000 m°C
*
* The temperature from the steps:
*
* Temp = TempBase + (steps x 784)
*
* and the steps from the temperature:
*
* steps = (Temp - TempBase) / 784
*
*/
static inline int hisi_thermal_step_to_temp(int step)
{
return HISI_TEMP_BASE + (step * HISI_TEMP_STEP);
}
static inline long hisi_thermal_temp_to_step(long temp)
{
return (temp - HISI_TEMP_BASE) / HISI_TEMP_STEP;
}
static inline long hisi_thermal_round_temp(int temp)
{
return hisi_thermal_step_to_temp(
hisi_thermal_temp_to_step(temp));
}
static inline void hisi_thermal_set_lag(void __iomem *addr, int value)
{
writel(value, addr + TEMP0_LAG);
}
static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value)
{
writel(value, addr + TEMP0_INT_CLR);
}
static inline void hisi_thermal_alarm_enable(void __iomem *addr, int value)
{
writel(value, addr + TEMP0_INT_EN);
}
static inline void hisi_thermal_alarm_set(void __iomem *addr, int temp)
{
writel(hisi_thermal_temp_to_step(temp) | 0x0FFFFFF00, addr + TEMP0_TH);
}
static inline void hisi_thermal_reset_set(void __iomem *addr, int temp)
{
writel(hisi_thermal_temp_to_step(temp), addr + TEMP0_RST_TH);
}
static inline void hisi_thermal_reset_enable(void __iomem *addr, int value)
{
writel(value, addr + TEMP0_RST_MSK);
}
static inline void hisi_thermal_enable(void __iomem *addr, int value)
{
writel(value, addr + TEMP0_EN);
}
static inline int hisi_thermal_get_temperature(void __iomem *addr)
{
return hisi_thermal_step_to_temp(readl(addr + TEMP0_VALUE));
}
/*
* Temperature configuration register - Sensor selection
*
* Bits [19:12]
*
* 0x0: local sensor (default)
* 0x1: remote sensor 1 (ACPU cluster 1)
* 0x2: remote sensor 2 (ACPU cluster 0)
* 0x3: remote sensor 3 (G3D)
*/
static inline void hisi_thermal_sensor_select(void __iomem *addr, int sensor)
{
writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_SS_MSK) |
(sensor << 12), addr + TEMP0_CFG);
}
/*
* Temperature configuration register - Hdak conversion polling interval
*
* Bits [5:4]
*
* 0x0 : 0.768 ms
* 0x1 : 6.144 ms
* 0x2 : 49.152 ms
* 0x3 : 393.216 ms
*/
static inline void hisi_thermal_hdak_set(void __iomem *addr, int value)
{
writel((readl(addr + TEMP0_CFG) & ~TEMP0_CFG_HDAK_MSK) |
(value << 4), addr + TEMP0_CFG);
}
static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data,
struct hisi_thermal_sensor *sensor)
{
long val;
mutex_lock(&data->thermal_lock);
/* disable interrupt */
hisi_thermal_alarm_enable(data->regs, 0);
hisi_thermal_alarm_clear(data->regs, 1);
/* disable module firstly */
hisi_thermal_enable(data->regs, 0);
/* select sensor id */
hisi_thermal_sensor_select(data->regs, sensor->id);
/* enable module */
hisi_thermal_enable(data->regs, 1);
usleep_range(3000, 5000);
val = hisi_thermal_get_temperature(data->regs);
mutex_unlock(&data->thermal_lock);
return val;
}
static void hisi_thermal_enable_bind_irq_sensor
(struct hisi_thermal_data *data)
{
struct hisi_thermal_sensor *sensor;
mutex_lock(&data->thermal_lock);
sensor = &data->sensors;
/* setting the hdak time */
hisi_thermal_hdak_set(data->regs, 0);
/* disable module firstly */
hisi_thermal_reset_enable(data->regs, 0);
hisi_thermal_enable(data->regs, 0);
/* select sensor id */
hisi_thermal_sensor_select(data->regs, sensor->id);
/* enable for interrupt */
hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
/* enable module */
hisi_thermal_reset_enable(data->regs, 1);
hisi_thermal_enable(data->regs, 1);
hisi_thermal_alarm_clear(data->regs, 0);
hisi_thermal_alarm_enable(data->regs, 1);
usleep_range(3000, 5000);
mutex_unlock(&data->thermal_lock);
}
static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data)
{
mutex_lock(&data->thermal_lock);
/* disable sensor module */
hisi_thermal_enable(data->regs, 0);
hisi_thermal_alarm_enable(data->regs, 0);
hisi_thermal_reset_enable(data->regs, 0);
mutex_unlock(&data->thermal_lock);
}
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 06:12:54 +00:00
static int hisi_thermal_get_temp(void *_sensor, int *temp)
{
struct hisi_thermal_sensor *sensor = _sensor;
struct hisi_thermal_data *data = sensor->thermal;
*temp = hisi_thermal_get_sensor_temp(data, sensor);
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 06:12:54 +00:00
dev_dbg(&data->pdev->dev, "id=%d, irq=%d, temp=%d, thres=%d\n",
sensor->id, data->irq_enabled, *temp, sensor->thres_temp);
/*
* Bind irq to sensor for two cases:
* Reenable alarm IRQ if temperature below threshold;
* if irq has been enabled, always set it;
*/
if (data->irq_enabled) {
hisi_thermal_enable_bind_irq_sensor(data);
return 0;
}
if (*temp < sensor->thres_temp) {
data->irq_enabled = true;
hisi_thermal_enable_bind_irq_sensor(data);
enable_irq(data->irq);
}
return 0;
}
static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
.get_temp = hisi_thermal_get_temp,
};
static irqreturn_t hisi_thermal_alarm_irq(int irq, void *dev)
{
struct hisi_thermal_data *data = dev;
disable_irq_nosync(irq);
data->irq_enabled = false;
return IRQ_WAKE_THREAD;
}
static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
{
struct hisi_thermal_data *data = dev;
struct hisi_thermal_sensor *sensor = &data->sensors;
dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n",
sensor->thres_temp);
thermal_zone_device_update(data->sensors.tzd,
THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
static int hisi_thermal_register_sensor(struct platform_device *pdev,
struct hisi_thermal_data *data,
struct hisi_thermal_sensor *sensor,
int index)
{
int ret, i;
const struct thermal_trip *trip;
sensor->id = index;
sensor->thermal = data;
sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
sensor->id, sensor, &hisi_of_thermal_ops);
if (IS_ERR(sensor->tzd)) {
ret = PTR_ERR(sensor->tzd);
sensor->tzd = NULL;
dev_err(&pdev->dev, "failed to register sensor id %d: %d\n",
sensor->id, ret);
return ret;
}
trip = of_thermal_get_trip_points(sensor->tzd);
for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) {
if (trip[i].type == THERMAL_TRIP_PASSIVE) {
sensor->thres_temp = hisi_thermal_round_temp(trip[i].temperature);
break;
}
}
return 0;
}
static const struct of_device_id of_hisi_thermal_match[] = {
{ .compatible = "hisilicon,tsensor" },
{ /* end */ }
};
MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
bool on)
{
struct thermal_zone_device *tzd = sensor->tzd;
tzd->ops->set_mode(tzd,
on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
}
static int hisi_thermal_probe(struct platform_device *pdev)
{
struct hisi_thermal_data *data;
struct resource *res;
int ret;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
mutex_init(&data->thermal_lock);
data->pdev = pdev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(data->regs)) {
dev_err(&pdev->dev, "failed to get io address\n");
return PTR_ERR(data->regs);
}
data->irq = platform_get_irq(pdev, 0);
if (data->irq < 0)
return data->irq;
platform_set_drvdata(pdev, data);
data->clk = devm_clk_get(&pdev->dev, "thermal_clk");
if (IS_ERR(data->clk)) {
ret = PTR_ERR(data->clk);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"failed to get thermal clk: %d\n", ret);
return ret;
}
/* enable clock for thermal */
ret = clk_prepare_enable(data->clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
return ret;
}
hisi_thermal_enable_bind_irq_sensor(data);
data->irq_enabled = true;
ret = hisi_thermal_register_sensor(pdev, data,
&data->sensors,
HISI_DEFAULT_SENSOR);
if (ret) {
dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
ret);
return ret;
}
hisi_thermal_toggle_sensor(&data->sensors, true);
ret = devm_request_threaded_irq(&pdev->dev, data->irq,
hisi_thermal_alarm_irq,
hisi_thermal_alarm_irq_thread,
0, "hisi_thermal", data);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
return ret;
}
enable_irq(data->irq);
return 0;
}
static int hisi_thermal_remove(struct platform_device *pdev)
{
struct hisi_thermal_data *data = platform_get_drvdata(pdev);
struct hisi_thermal_sensor *sensor = &data->sensors;
hisi_thermal_toggle_sensor(sensor, false);
hisi_thermal_disable_sensor(data);
clk_disable_unprepare(data->clk);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int hisi_thermal_suspend(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
hisi_thermal_disable_sensor(data);
data->irq_enabled = false;
clk_disable_unprepare(data->clk);
return 0;
}
static int hisi_thermal_resume(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(data->clk);
if (ret)
return ret;
data->irq_enabled = true;
hisi_thermal_enable_bind_irq_sensor(data);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(hisi_thermal_pm_ops,
hisi_thermal_suspend, hisi_thermal_resume);
static struct platform_driver hisi_thermal_driver = {
.driver = {
.name = "hisi_thermal",
.pm = &hisi_thermal_pm_ops,
.of_match_table = of_hisi_thermal_match,
},
.probe = hisi_thermal_probe,
.remove = hisi_thermal_remove,
};
module_platform_driver(hisi_thermal_driver);
MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei@hisilicon.com>");
MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
MODULE_DESCRIPTION("Hisilicon thermal driver");
MODULE_LICENSE("GPL v2");