linux/drivers/gpio/gpio-bcm-kona.c

678 lines
18 KiB
C
Raw Normal View History

/*
* Broadcom Kona GPIO Driver
*
* Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>
* Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/gpio/driver.h>
#include <linux/of_device.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#define BCM_GPIO_PASSWD 0x00a5a501
#define GPIO_PER_BANK 32
#define GPIO_MAX_BANK_NUM 8
#define GPIO_BANK(gpio) ((gpio) >> 5)
#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))
/* There is a GPIO control register for each GPIO */
#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2))
/* The remaining registers are per GPIO bank */
#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
#define GPIO_GPPWR_OFFSET 0x00000520
#define GPIO_GPCTR0_DBR_SHIFT 5
#define GPIO_GPCTR0_DBR_MASK 0x000001e0
#define GPIO_GPCTR0_ITR_SHIFT 3
#define GPIO_GPCTR0_ITR_MASK 0x00000018
#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
#define GPIO_GPCTR0_IOTR_MASK 0x00000001
#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100
#define LOCK_CODE 0xffffffff
#define UNLOCK_CODE 0x00000000
struct bcm_kona_gpio {
void __iomem *reg_base;
int num_bank;
raw_spinlock_t lock;
struct gpio_chip gpio_chip;
struct irq_domain *irq_domain;
struct bcm_kona_gpio_bank *banks;
struct platform_device *pdev;
};
struct bcm_kona_gpio_bank {
int id;
int irq;
/* Used in the interrupt handler */
struct bcm_kona_gpio *kona_gpio;
};
static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
int bank_id, u32 lockcode)
{
writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
}
static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
unsigned gpio)
{
u32 val;
unsigned long flags;
int bank_id = GPIO_BANK(gpio);
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
val |= BIT(gpio);
bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
unsigned gpio)
{
u32 val;
unsigned long flags;
int bank_id = GPIO_BANK(gpio);
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
val &= ~BIT(gpio);
bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
void __iomem *reg_base = kona_gpio->reg_base;
u32 val;
val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
return val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
}
static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
int bank_id = GPIO_BANK(gpio);
int bit = GPIO_BIT(gpio);
u32 val, reg_offset;
unsigned long flags;
kona_gpio = gpiochip_get_data(chip);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
/* this function only applies to output pin */
if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
goto out;
reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
val = readl(reg_base + reg_offset);
val |= BIT(bit);
writel(val, reg_base + reg_offset);
out:
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
int bank_id = GPIO_BANK(gpio);
int bit = GPIO_BIT(gpio);
u32 val, reg_offset;
unsigned long flags;
kona_gpio = gpiochip_get_data(chip);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
reg_offset = GPIO_IN_STATUS(bank_id);
else
reg_offset = GPIO_OUT_STATUS(bank_id);
/* read the GPIO bank status */
val = readl(reg_base + reg_offset);
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
/* return the specified bit status */
return !!(val & BIT(bit));
}
static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
return 0;
}
static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
}
static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
u32 val;
unsigned long flags;
kona_gpio = gpiochip_get_data(chip);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_IOTR_MASK;
val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
writel(val, reg_base + GPIO_CONTROL(gpio));
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
}
static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
unsigned gpio, int value)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
int bank_id = GPIO_BANK(gpio);
int bit = GPIO_BIT(gpio);
u32 val, reg_offset;
unsigned long flags;
kona_gpio = gpiochip_get_data(chip);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_IOTR_MASK;
val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
writel(val, reg_base + GPIO_CONTROL(gpio));
reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
val = readl(reg_base + reg_offset);
val |= BIT(bit);
writel(val, reg_base + reg_offset);
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
}
static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcm_kona_gpio *kona_gpio;
kona_gpio = gpiochip_get_data(chip);
if (gpio >= kona_gpio->gpio_chip.ngpio)
return -ENXIO;
return irq_create_mapping(kona_gpio->irq_domain, gpio);
}
static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
unsigned debounce)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
u32 val, res;
unsigned long flags;
kona_gpio = gpiochip_get_data(chip);
reg_base = kona_gpio->reg_base;
/* debounce must be 1-128ms (or 0) */
if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 08:56:26 +00:00
dev_err(chip->parent, "Debounce value %u not in range\n",
debounce);
return -EINVAL;
}
/* calculate debounce bit value */
if (debounce != 0) {
/* Convert to ms */
debounce /= 1000;
/* find the MSB */
res = fls(debounce) - 1;
/* Check if MSB-1 is set (round up or down) */
if (res > 0 && (debounce & BIT(res - 1)))
res++;
}
/* spin lock for read-modify-write of the GPIO register */
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_DBR_MASK;
if (debounce == 0) {
/* disable debounce */
val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
} else {
val |= GPIO_GPCTR0_DB_ENABLE_MASK |
(res << GPIO_GPCTR0_DBR_SHIFT);
}
writel(val, reg_base + GPIO_CONTROL(gpio));
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
}
static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio,
unsigned long config)
{
u32 debounce;
if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
return -ENOTSUPP;
debounce = pinconf_to_config_argument(config);
return bcm_kona_gpio_set_debounce(chip, gpio, debounce);
}
static const struct gpio_chip template_chip = {
.label = "bcm-kona-gpio",
.owner = THIS_MODULE,
.request = bcm_kona_gpio_request,
.free = bcm_kona_gpio_free,
.get_direction = bcm_kona_gpio_get_dir,
.direction_input = bcm_kona_gpio_direction_input,
.get = bcm_kona_gpio_get,
.direction_output = bcm_kona_gpio_direction_output,
.set = bcm_kona_gpio_set,
.set_config = bcm_kona_gpio_set_config,
.to_irq = bcm_kona_gpio_to_irq,
.base = 0,
};
static void bcm_kona_gpio_irq_ack(struct irq_data *d)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
unsigned gpio = d->hwirq;
int bank_id = GPIO_BANK(gpio);
int bit = GPIO_BIT(gpio);
u32 val;
unsigned long flags;
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_INT_STATUS(bank_id));
val |= BIT(bit);
writel(val, reg_base + GPIO_INT_STATUS(bank_id));
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static void bcm_kona_gpio_irq_mask(struct irq_data *d)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
unsigned gpio = d->hwirq;
int bank_id = GPIO_BANK(gpio);
int bit = GPIO_BIT(gpio);
u32 val;
unsigned long flags;
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_INT_MASK(bank_id));
val |= BIT(bit);
writel(val, reg_base + GPIO_INT_MASK(bank_id));
gpiochip_disable_irq(&kona_gpio->gpio_chip, gpio);
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
unsigned gpio = d->hwirq;
int bank_id = GPIO_BANK(gpio);
int bit = GPIO_BIT(gpio);
u32 val;
unsigned long flags;
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
val |= BIT(bit);
writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
gpiochip_enable_irq(&kona_gpio->gpio_chip, gpio);
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
}
static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct bcm_kona_gpio *kona_gpio;
void __iomem *reg_base;
unsigned gpio = d->hwirq;
u32 lvl_type;
u32 val;
unsigned long flags;
kona_gpio = irq_data_get_irq_chip_data(d);
reg_base = kona_gpio->reg_base;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
break;
case IRQ_TYPE_LEVEL_HIGH:
case IRQ_TYPE_LEVEL_LOW:
/* BCM GPIO doesn't support level triggering */
default:
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 08:56:26 +00:00
dev_err(kona_gpio->gpio_chip.parent,
"Invalid BCM GPIO irq type 0x%x\n", type);
return -EINVAL;
}
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
val = readl(reg_base + GPIO_CONTROL(gpio));
val &= ~GPIO_GPCTR0_ITR_MASK;
val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
writel(val, reg_base + GPIO_CONTROL(gpio));
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
return 0;
}
static void bcm_kona_gpio_irq_handler(struct irq_desc *desc)
{
void __iomem *reg_base;
int bit, bank_id;
unsigned long sta;
struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
chained_irq_enter(chip, desc);
/*
* For bank interrupts, we can't use chip_data to store the kona_gpio
* pointer, since GIC needs it for its own purposes. Therefore, we get
* our pointer from the bank structure.
*/
reg_base = bank->kona_gpio->reg_base;
bank_id = bank->id;
while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
(~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
for_each_set_bit(bit, &sta, 32) {
int hwirq = GPIO_PER_BANK * bank_id + bit;
int child_irq =
irq_find_mapping(bank->kona_gpio->irq_domain,
hwirq);
/*
* Clear interrupt before handler is called so we don't
* miss any interrupt occurred during executing them.
*/
writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
/* Invoke interrupt handler */
generic_handle_irq(child_irq);
}
}
chained_irq_exit(chip, desc);
}
static int bcm_kona_gpio_irq_reqres(struct irq_data *d)
{
struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
return gpiochip_reqres_irq(&kona_gpio->gpio_chip, d->hwirq);
}
static void bcm_kona_gpio_irq_relres(struct irq_data *d)
{
struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
gpiochip_relres_irq(&kona_gpio->gpio_chip, d->hwirq);
}
static struct irq_chip bcm_gpio_irq_chip = {
.name = "bcm-kona-gpio",
.irq_ack = bcm_kona_gpio_irq_ack,
.irq_mask = bcm_kona_gpio_irq_mask,
.irq_unmask = bcm_kona_gpio_irq_unmask,
.irq_set_type = bcm_kona_gpio_irq_set_type,
.irq_request_resources = bcm_kona_gpio_irq_reqres,
.irq_release_resources = bcm_kona_gpio_irq_relres,
};
static struct of_device_id const bcm_kona_gpio_of_match[] = {
{ .compatible = "brcm,kona-gpio" },
{}
};
/*
* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
static struct lock_class_key gpio_request_class;
static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
int ret;
ret = irq_set_chip_data(irq, d->host_data);
if (ret < 0)
return ret;
irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class);
irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
irq_set_noprobe(irq);
return 0;
}
static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
{
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops bcm_kona_irq_ops = {
.map = bcm_kona_gpio_irq_map,
.unmap = bcm_kona_gpio_irq_unmap,
.xlate = irq_domain_xlate_twocell,
};
static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
{
void __iomem *reg_base;
int i;
reg_base = kona_gpio->reg_base;
/* disable interrupts and clear status */
for (i = 0; i < kona_gpio->num_bank; i++) {
/* Unlock the entire bank first */
bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
/* Now re-lock the bank */
bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
}
}
static int bcm_kona_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *match;
struct bcm_kona_gpio_bank *bank;
struct bcm_kona_gpio *kona_gpio;
struct gpio_chip *chip;
int ret;
int i;
match = of_match_device(bcm_kona_gpio_of_match, dev);
if (!match) {
dev_err(dev, "Failed to find gpio controller\n");
return -ENODEV;
}
kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
if (!kona_gpio)
return -ENOMEM;
kona_gpio->gpio_chip = template_chip;
chip = &kona_gpio->gpio_chip;
ret = platform_irq_count(pdev);
if (!ret) {
dev_err(dev, "Couldn't determine # GPIO banks\n");
return -ENOENT;
} else if (ret < 0) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "Couldn't determine GPIO banks: (%pe)\n",
ERR_PTR(ret));
return ret;
}
kona_gpio->num_bank = ret;
if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
GPIO_MAX_BANK_NUM);
return -ENXIO;
}
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
kona_gpio->banks = devm_kcalloc(dev,
kona_gpio->num_bank,
sizeof(*kona_gpio->banks),
GFP_KERNEL);
if (!kona_gpio->banks)
return -ENOMEM;
kona_gpio->pdev = pdev;
platform_set_drvdata(pdev, kona_gpio);
chip->of_node = dev->of_node;
chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
chip->ngpio,
&bcm_kona_irq_ops,
kona_gpio);
if (!kona_gpio->irq_domain) {
dev_err(dev, "Couldn't allocate IRQ domain\n");
return -ENXIO;
}
kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(kona_gpio->reg_base)) {
ret = -ENXIO;
goto err_irq_domain;
}
for (i = 0; i < kona_gpio->num_bank; i++) {
bank = &kona_gpio->banks[i];
bank->id = i;
bank->irq = platform_get_irq(pdev, i);
bank->kona_gpio = kona_gpio;
if (bank->irq < 0) {
dev_err(dev, "Couldn't get IRQ for bank %d", i);
ret = -ENOENT;
goto err_irq_domain;
}
}
dev_info(&pdev->dev, "Setting up Kona GPIO\n");
bcm_kona_gpio_reset(kona_gpio);
ret = devm_gpiochip_add_data(dev, chip, kona_gpio);
if (ret < 0) {
dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
goto err_irq_domain;
}
for (i = 0; i < kona_gpio->num_bank; i++) {
bank = &kona_gpio->banks[i];
irq_set_chained_handler_and_data(bank->irq,
bcm_kona_gpio_irq_handler,
bank);
}
raw_spin_lock_init(&kona_gpio->lock);
return 0;
err_irq_domain:
irq_domain_remove(kona_gpio->irq_domain);
return ret;
}
static struct platform_driver bcm_kona_gpio_driver = {
.driver = {
.name = "bcm-kona-gpio",
.of_match_table = bcm_kona_gpio_of_match,
},
.probe = bcm_kona_gpio_probe,
};
builtin_platform_driver(bcm_kona_gpio_driver);