linux/arch/arm/mach-omap1/board-palmtt.c

290 lines
6.3 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-omap1/board-palmtt.c
*
* Modified from board-palmtt2.c
*
* Modified and amended for Palm Tungsten|T
* by Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/flash.h>
#include <mach/mux.h>
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30 16:41:50 +00:00
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
#define PALMTT_LED_GPIO 3
#define PALMTT_PENIRQ_GPIO 6
#define PALMTT_MMC_WP_GPIO 8
#define PALMTT_HDQ_GPIO 11
static const unsigned int palmtt_keymap[] = {
KEY(0, 0, KEY_ESC),
KEY(1, 0, KEY_SPACE),
KEY(2, 0, KEY_LEFTCTRL),
KEY(3, 0, KEY_TAB),
KEY(4, 0, KEY_ENTER),
KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
KEY(2, 1, KEY_UP),
KEY(3, 1, KEY_RIGHT),
KEY(0, 2, KEY_SLEEP),
KEY(4, 2, KEY_Y),
};
static struct mtd_partition palmtt_partitions[] = {
{
.name = "write8k",
.offset = 0,
.size = SZ_8K,
.mask_flags = 0,
},
{
.name = "PalmOS-BootLoader(ro)",
.offset = SZ_8K,
.size = 7 * SZ_8K,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "u-boot",
.offset = MTDPART_OFS_APPEND,
.size = 8 * SZ_8K,
.mask_flags = 0,
},
{
.name = "PalmOS-FS(ro)",
.offset = MTDPART_OFS_APPEND,
.size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "u-boot(rez)",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0
},
{
.name = "empty",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data palmtt_flash_data = {
.width = 2,
.set_vpp = omap1_set_vpp,
.parts = palmtt_partitions,
.nr_parts = ARRAY_SIZE(palmtt_partitions),
};
static struct resource palmtt_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_8M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device palmtt_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &palmtt_flash_data,
},
.num_resources = 1,
.resource = &palmtt_flash_resource,
};
static struct resource palmtt_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static const struct matrix_keymap_data palmtt_keymap_data = {
.keymap = palmtt_keymap,
.keymap_size = ARRAY_SIZE(palmtt_keymap),
};
static struct omap_kp_platform_data palmtt_kp_data = {
.rows = 6,
.cols = 3,
.keymap_data = &palmtt_keymap_data,
};
static struct platform_device palmtt_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &palmtt_kp_data,
},
.num_resources = ARRAY_SIZE(palmtt_kp_resources),
.resource = palmtt_kp_resources,
};
static struct platform_device palmtt_lcd_device = {
.name = "lcd_palmtt",
.id = -1,
};
static struct platform_device palmtt_spi_device = {
.name = "spi_palmtt",
.id = -1,
};
static struct omap_backlight_config palmtt_backlight_config = {
.default_intensity = 0xa0,
};
static struct platform_device palmtt_backlight_device = {
.name = "omap-bl",
.id = -1,
.dev = {
.platform_data= &palmtt_backlight_config,
},
};
static struct omap_led_config palmtt_led_config[] = {
{
.cdev = {
.name = "palmtt:led0",
},
.gpio = PALMTT_LED_GPIO,
},
};
static struct omap_led_platform_data palmtt_led_data = {
.nr_leds = ARRAY_SIZE(palmtt_led_config),
.leds = palmtt_led_config,
};
static struct platform_device palmtt_led_device = {
.name = "omap-led",
.id = -1,
.dev = {
.platform_data = &palmtt_led_data,
},
};
static struct platform_device *palmtt_devices[] __initdata = {
&palmtt_flash_device,
&palmtt_kp_device,
&palmtt_lcd_device,
&palmtt_spi_device,
&palmtt_backlight_device,
&palmtt_led_device,
};
static int palmtt_get_pendown_state(void)
{
return !gpio_get_value(6);
}
static const struct ads7846_platform_data palmtt_ts_info = {
.model = 7846,
.vref_delay_usecs = 100, /* internal, no capacitor */
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.get_pendown_state = palmtt_get_pendown_state,
};
static struct spi_board_info __initdata palmtt_boardinfo[] = {
{
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmtt_ts_info,
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
.chip_select = 0,
}
};
static struct omap_usb_config palmtt_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0,
.pins[0] = 2,
};
static struct omap_lcd_config palmtt_lcd_config __initdata = {
.ctrl_name = "internal",
};
static void __init omap_mpu_wdt_mode(int mode) {
if (mode)
omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
else {
omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
}
}
static void __init omap_palmtt_init(void)
{
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
omap_cfg_reg(UART2_TX);
omap_cfg_reg(UART2_RTS);
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
omap_mpu_wdt_mode(0);
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
palmtt_boardinfo[0].irq = gpio_to_irq(6);
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
omapfb_set_lcd_config(&palmtt_lcd_config);
}
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END