linux/fs/nfs/nfs3proc.c

1068 lines
26 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/nfs/nfs3proc.c
*
* Client-side NFSv3 procedures stubs.
*
* Copyright (C) 1997, Olaf Kirch
*/
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/nfs.h>
#include <linux/nfs3.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
#include <linux/lockd/bind.h>
#include <linux/nfs_mount.h>
#include <linux/freezer.h>
#include <linux/xattr.h>
#include "iostat.h"
#include "internal.h"
#include "nfs3_fs.h"
#define NFSDBG_FACILITY NFSDBG_PROC
/* A wrapper to handle the EJUKEBOX error messages */
static int
nfs3_rpc_wrapper(struct rpc_clnt *clnt, struct rpc_message *msg, int flags)
{
int res;
do {
res = rpc_call_sync(clnt, msg, flags);
if (res != -EJUKEBOX)
break;
freezable_schedule_timeout_killable_unsafe(NFS_JUKEBOX_RETRY_TIME);
res = -ERESTARTSYS;
} while (!fatal_signal_pending(current));
return res;
}
#define rpc_call_sync(clnt, msg, flags) nfs3_rpc_wrapper(clnt, msg, flags)
static int
nfs3_async_handle_jukebox(struct rpc_task *task, struct inode *inode)
{
if (task->tk_status != -EJUKEBOX)
return 0;
nfs_inc_stats(inode, NFSIOS_DELAY);
task->tk_status = 0;
rpc_restart_call(task);
rpc_delay(task, NFS_JUKEBOX_RETRY_TIME);
return 1;
}
static int
do_proc_get_root(struct rpc_clnt *client, struct nfs_fh *fhandle,
struct nfs_fsinfo *info)
{
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_FSINFO],
.rpc_argp = fhandle,
.rpc_resp = info,
};
int status;
dprintk("%s: call fsinfo\n", __func__);
nfs_fattr_init(info->fattr);
status = rpc_call_sync(client, &msg, 0);
dprintk("%s: reply fsinfo: %d\n", __func__, status);
if (status == 0 && !(info->fattr->valid & NFS_ATTR_FATTR)) {
msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR];
msg.rpc_resp = info->fattr;
status = rpc_call_sync(client, &msg, 0);
dprintk("%s: reply getattr: %d\n", __func__, status);
}
return status;
}
/*
NFS: Share NFS superblocks per-protocol per-server per-FSID The attached patch makes NFS share superblocks between mounts from the same server and FSID over the same protocol. It does this by creating each superblock with a false root and returning the real root dentry in the vfsmount presented by get_sb(). The root dentry set starts off as an anonymous dentry if we don't already have the dentry for its inode, otherwise it simply returns the dentry we already have. We may thus end up with several trees of dentries in the superblock, and if at some later point one of anonymous tree roots is discovered by normal filesystem activity to be located in another tree within the superblock, the anonymous root is named and materialises attached to the second tree at the appropriate point. Why do it this way? Why not pass an extra argument to the mount() syscall to indicate the subpath and then pathwalk from the server root to the desired directory? You can't guarantee this will work for two reasons: (1) The root and intervening nodes may not be accessible to the client. With NFS2 and NFS3, for instance, mountd is called on the server to get the filehandle for the tip of a path. mountd won't give us handles for anything we don't have permission to access, and so we can't set up NFS inodes for such nodes, and so can't easily set up dentries (we'd have to have ghost inodes or something). With this patch we don't actually create dentries until we get handles from the server that we can use to set up their inodes, and we don't actually bind them into the tree until we know for sure where they go. (2) Inaccessible symbolic links. If we're asked to mount two exports from the server, eg: mount warthog:/warthog/aaa/xxx /mmm mount warthog:/warthog/bbb/yyy /nnn We may not be able to access anything nearer the root than xxx and yyy, but we may find out later that /mmm/www/yyy, say, is actually the same directory as the one mounted on /nnn. What we might then find out, for example, is that /warthog/bbb was actually a symbolic link to /warthog/aaa/xxx/www, but we can't actually determine that by talking to the server until /warthog is made available by NFS. This would lead to having constructed an errneous dentry tree which we can't easily fix. We can end up with a dentry marked as a directory when it should actually be a symlink, or we could end up with an apparently hardlinked directory. With this patch we need not make assumptions about the type of a dentry for which we can't retrieve information, nor need we assume we know its place in the grand scheme of things until we actually see that place. This patch reduces the possibility of aliasing in the inode and page caches for inodes that may be accessed by more than one NFS export. It also reduces the number of superblocks required for NFS where there are many NFS exports being used from a server (home directory server + autofs for example). This in turn makes it simpler to do local caching of network filesystems, as it can then be guaranteed that there won't be links from multiple inodes in separate superblocks to the same cache file. Obviously, cache aliasing between different levels of NFS protocol could still be a problem, but at least that gives us another key to use when indexing the cache. This patch makes the following changes: (1) The server record construction/destruction has been abstracted out into its own set of functions to make things easier to get right. These have been moved into fs/nfs/client.c. All the code in fs/nfs/client.c has to do with the management of connections to servers, and doesn't touch superblocks in any way; the remaining code in fs/nfs/super.c has to do with VFS superblock management. (2) The sequence of events undertaken by NFS mount is now reordered: (a) A volume representation (struct nfs_server) is allocated. (b) A server representation (struct nfs_client) is acquired. This may be allocated or shared, and is keyed on server address, port and NFS version. (c) If allocated, the client representation is initialised. The state member variable of nfs_client is used to prevent a race during initialisation from two mounts. (d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find the root filehandle for the mount (fs/nfs/getroot.c). For NFS2/3 we are given the root FH in advance. (e) The volume FSID is probed for on the root FH. (f) The volume representation is initialised from the FSINFO record retrieved on the root FH. (g) sget() is called to acquire a superblock. This may be allocated or shared, keyed on client pointer and FSID. (h) If allocated, the superblock is initialised. (i) If the superblock is shared, then the new nfs_server record is discarded. (j) The root dentry for this mount is looked up from the root FH. (k) The root dentry for this mount is assigned to the vfsmount. (3) nfs_readdir_lookup() creates dentries for each of the entries readdir() returns; this function now attaches disconnected trees from alternate roots that happen to be discovered attached to a directory being read (in the same way nfs_lookup() is made to do for lookup ops). The new d_materialise_unique() function is now used to do this, thus permitting the whole thing to be done under one set of locks, and thus avoiding any race between mount and lookup operations on the same directory. (4) The client management code uses a new debug facility: NFSDBG_CLIENT which is set by echoing 1024 to /proc/net/sunrpc/nfs_debug. (5) Clone mounts are now called xdev mounts. (6) Use the dentry passed to the statfs() op as the handle for retrieving fs statistics rather than the root dentry of the superblock (which is now a dummy). Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-08-23 00:06:13 +00:00
* Bare-bones access to getattr: this is for nfs_get_root/nfs_get_sb
*/
static int
nfs3_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle,
struct nfs_fsinfo *info)
{
int status;
status = do_proc_get_root(server->client, fhandle, info);
if (status && server->nfs_client->cl_rpcclient != server->client)
status = do_proc_get_root(server->nfs_client->cl_rpcclient, fhandle, info);
return status;
}
/*
* One function for each procedure in the NFS protocol.
*/
static int
nfs3_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle,
struct nfs_fattr *fattr, struct inode *inode)
{
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR],
.rpc_argp = fhandle,
.rpc_resp = fattr,
};
int status;
unsigned short task_flags = 0;
/* Is this is an attribute revalidation, subject to softreval? */
if (inode && (server->flags & NFS_MOUNT_SOFTREVAL))
task_flags |= RPC_TASK_TIMEOUT;
dprintk("NFS call getattr\n");
nfs_fattr_init(fattr);
status = rpc_call_sync(server->client, &msg, task_flags);
dprintk("NFS reply getattr: %d\n", status);
return status;
}
static int
nfs3_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
struct iattr *sattr)
{
struct inode *inode = d_inode(dentry);
struct nfs3_sattrargs arg = {
.fh = NFS_FH(inode),
.sattr = sattr,
};
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_SETATTR],
.rpc_argp = &arg,
.rpc_resp = fattr,
};
int status;
dprintk("NFS call setattr\n");
if (sattr->ia_valid & ATTR_FILE)
msg.rpc_cred = nfs_file_cred(sattr->ia_file);
nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
if (status == 0) {
nfs_setattr_update_inode(inode, sattr, fattr);
if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
nfs_zap_acl_cache(inode);
}
dprintk("NFS reply setattr: %d\n", status);
return status;
}
static int
__nfs3_proc_lookup(struct inode *dir, const char *name, size_t len,
struct nfs_fh *fhandle, struct nfs_fattr *fattr,
unsigned short task_flags)
{
struct nfs3_diropargs arg = {
.fh = NFS_FH(dir),
.name = name,
.len = len
};
struct nfs3_diropres res = {
.fh = fhandle,
.fattr = fattr
};
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_LOOKUP],
.rpc_argp = &arg,
.rpc_resp = &res,
};
int status;
res.dir_attr = nfs_alloc_fattr();
if (res.dir_attr == NULL)
return -ENOMEM;
nfs_fattr_init(fattr);
status = rpc_call_sync(NFS_CLIENT(dir), &msg, task_flags);
nfs_refresh_inode(dir, res.dir_attr);
if (status >= 0 && !(fattr->valid & NFS_ATTR_FATTR)) {
msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR];
msg.rpc_argp = fhandle;
msg.rpc_resp = fattr;
status = rpc_call_sync(NFS_CLIENT(dir), &msg, task_flags);
}
nfs_free_fattr(res.dir_attr);
dprintk("NFS reply lookup: %d\n", status);
return status;
}
static int
nfs3_proc_lookup(struct inode *dir, struct dentry *dentry,
struct nfs_fh *fhandle, struct nfs_fattr *fattr)
{
unsigned short task_flags = 0;
/* Is this is an attribute revalidation, subject to softreval? */
if (nfs_lookup_is_soft_revalidate(dentry))
task_flags |= RPC_TASK_TIMEOUT;
dprintk("NFS call lookup %pd2\n", dentry);
return __nfs3_proc_lookup(dir, dentry->d_name.name,
dentry->d_name.len, fhandle, fattr,
task_flags);
}
static int nfs3_proc_lookupp(struct inode *inode, struct nfs_fh *fhandle,
struct nfs_fattr *fattr)
{
const char dotdot[] = "..";
const size_t len = strlen(dotdot);
unsigned short task_flags = 0;
if (NFS_SERVER(inode)->flags & NFS_MOUNT_SOFTREVAL)
task_flags |= RPC_TASK_TIMEOUT;
return __nfs3_proc_lookup(inode, dotdot, len, fhandle, fattr,
task_flags);
}
static int nfs3_proc_access(struct inode *inode, struct nfs_access_entry *entry,
const struct cred *cred)
{
struct nfs3_accessargs arg = {
.fh = NFS_FH(inode),
.access = entry->mask,
};
struct nfs3_accessres res;
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_ACCESS],
.rpc_argp = &arg,
.rpc_resp = &res,
.rpc_cred = cred,
};
int status = -ENOMEM;
dprintk("NFS call access\n");
res.fattr = nfs_alloc_fattr();
if (res.fattr == NULL)
goto out;
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
nfs_refresh_inode(inode, res.fattr);
if (status == 0)
nfs_access_set_mask(entry, res.access);
nfs_free_fattr(res.fattr);
out:
dprintk("NFS reply access: %d\n", status);
return status;
}
static int nfs3_proc_readlink(struct inode *inode, struct page *page,
unsigned int pgbase, unsigned int pglen)
{
struct nfs_fattr *fattr;
struct nfs3_readlinkargs args = {
.fh = NFS_FH(inode),
.pgbase = pgbase,
.pglen = pglen,
.pages = &page
};
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_READLINK],
.rpc_argp = &args,
};
int status = -ENOMEM;
dprintk("NFS call readlink\n");
fattr = nfs_alloc_fattr();
if (fattr == NULL)
goto out;
msg.rpc_resp = fattr;
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
nfs_refresh_inode(inode, fattr);
nfs_free_fattr(fattr);
out:
dprintk("NFS reply readlink: %d\n", status);
return status;
}
struct nfs3_createdata {
struct rpc_message msg;
union {
struct nfs3_createargs create;
struct nfs3_mkdirargs mkdir;
struct nfs3_symlinkargs symlink;
struct nfs3_mknodargs mknod;
} arg;
struct nfs3_diropres res;
struct nfs_fh fh;
struct nfs_fattr fattr;
struct nfs_fattr dir_attr;
};
static struct nfs3_createdata *nfs3_alloc_createdata(void)
{
struct nfs3_createdata *data;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data != NULL) {
data->msg.rpc_argp = &data->arg;
data->msg.rpc_resp = &data->res;
data->res.fh = &data->fh;
data->res.fattr = &data->fattr;
data->res.dir_attr = &data->dir_attr;
nfs_fattr_init(data->res.fattr);
nfs_fattr_init(data->res.dir_attr);
}
return data;
}
static struct dentry *
nfs3_do_create(struct inode *dir, struct dentry *dentry, struct nfs3_createdata *data)
{
int status;
status = rpc_call_sync(NFS_CLIENT(dir), &data->msg, 0);
nfs_post_op_update_inode(dir, data->res.dir_attr);
if (status != 0)
return ERR_PTR(status);
return nfs_add_or_obtain(dentry, data->res.fh, data->res.fattr);
}
static void nfs3_free_createdata(struct nfs3_createdata *data)
{
kfree(data);
}
/*
* Create a regular file.
*/
static int
nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
int flags)
{
struct posix_acl *default_acl, *acl;
struct nfs3_createdata *data;
struct dentry *d_alias;
int status = -ENOMEM;
dprintk("NFS call create %pd\n", dentry);
data = nfs3_alloc_createdata();
if (data == NULL)
goto out;
data->msg.rpc_proc = &nfs3_procedures[NFS3PROC_CREATE];
data->arg.create.fh = NFS_FH(dir);
data->arg.create.name = dentry->d_name.name;
data->arg.create.len = dentry->d_name.len;
data->arg.create.sattr = sattr;
data->arg.create.createmode = NFS3_CREATE_UNCHECKED;
if (flags & O_EXCL) {
data->arg.create.createmode = NFS3_CREATE_EXCLUSIVE;
data->arg.create.verifier[0] = cpu_to_be32(jiffies);
data->arg.create.verifier[1] = cpu_to_be32(current->pid);
}
status = posix_acl_create(dir, &sattr->ia_mode, &default_acl, &acl);
if (status)
goto out;
for (;;) {
d_alias = nfs3_do_create(dir, dentry, data);
status = PTR_ERR_OR_ZERO(d_alias);
if (status != -ENOTSUPP)
break;
/* If the server doesn't support the exclusive creation
* semantics, try again with simple 'guarded' mode. */
switch (data->arg.create.createmode) {
case NFS3_CREATE_EXCLUSIVE:
data->arg.create.createmode = NFS3_CREATE_GUARDED;
break;
case NFS3_CREATE_GUARDED:
data->arg.create.createmode = NFS3_CREATE_UNCHECKED;
break;
case NFS3_CREATE_UNCHECKED:
goto out_release_acls;
}
nfs_fattr_init(data->res.dir_attr);
nfs_fattr_init(data->res.fattr);
}
if (status != 0)
goto out_release_acls;
if (d_alias)
dentry = d_alias;
/* When we created the file with exclusive semantics, make
* sure we set the attributes afterwards. */
if (data->arg.create.createmode == NFS3_CREATE_EXCLUSIVE) {
dprintk("NFS call setattr (post-create)\n");
if (!(sattr->ia_valid & ATTR_ATIME_SET))
sattr->ia_valid |= ATTR_ATIME;
if (!(sattr->ia_valid & ATTR_MTIME_SET))
sattr->ia_valid |= ATTR_MTIME;
/* Note: we could use a guarded setattr here, but I'm
* not sure this buys us anything (and I'd have
* to revamp the NFSv3 XDR code) */
status = nfs3_proc_setattr(dentry, data->res.fattr, sattr);
nfs_post_op_update_inode(d_inode(dentry), data->res.fattr);
dprintk("NFS reply setattr (post-create): %d\n", status);
if (status != 0)
goto out_dput;
}
status = nfs3_proc_setacls(d_inode(dentry), acl, default_acl);
out_dput:
dput(d_alias);
out_release_acls:
posix_acl_release(acl);
posix_acl_release(default_acl);
out:
nfs3_free_createdata(data);
dprintk("NFS reply create: %d\n", status);
return status;
}
static int
nfs3_proc_remove(struct inode *dir, struct dentry *dentry)
{
struct nfs_removeargs arg = {
.fh = NFS_FH(dir),
.name = dentry->d_name,
};
struct nfs_removeres res;
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_REMOVE],
.rpc_argp = &arg,
.rpc_resp = &res,
};
int status = -ENOMEM;
dprintk("NFS call remove %pd2\n", dentry);
res.dir_attr = nfs_alloc_fattr();
if (res.dir_attr == NULL)
goto out;
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
nfs_post_op_update_inode(dir, res.dir_attr);
nfs_free_fattr(res.dir_attr);
out:
dprintk("NFS reply remove: %d\n", status);
return status;
}
static void
nfs3_proc_unlink_setup(struct rpc_message *msg,
struct dentry *dentry,
struct inode *inode)
{
msg->rpc_proc = &nfs3_procedures[NFS3PROC_REMOVE];
}
static void nfs3_proc_unlink_rpc_prepare(struct rpc_task *task, struct nfs_unlinkdata *data)
{
rpc_call_start(task);
}
static int
nfs3_proc_unlink_done(struct rpc_task *task, struct inode *dir)
{
struct nfs_removeres *res;
if (nfs3_async_handle_jukebox(task, dir))
return 0;
res = task->tk_msg.rpc_resp;
nfs_post_op_update_inode(dir, res->dir_attr);
return 1;
}
static void
nfs3_proc_rename_setup(struct rpc_message *msg,
struct dentry *old_dentry,
struct dentry *new_dentry)
{
msg->rpc_proc = &nfs3_procedures[NFS3PROC_RENAME];
}
static void nfs3_proc_rename_rpc_prepare(struct rpc_task *task, struct nfs_renamedata *data)
{
rpc_call_start(task);
}
static int
nfs3_proc_rename_done(struct rpc_task *task, struct inode *old_dir,
struct inode *new_dir)
{
struct nfs_renameres *res;
if (nfs3_async_handle_jukebox(task, old_dir))
return 0;
res = task->tk_msg.rpc_resp;
nfs_post_op_update_inode(old_dir, res->old_fattr);
nfs_post_op_update_inode(new_dir, res->new_fattr);
return 1;
}
static int
nfs3_proc_link(struct inode *inode, struct inode *dir, const struct qstr *name)
{
struct nfs3_linkargs arg = {
.fromfh = NFS_FH(inode),
.tofh = NFS_FH(dir),
.toname = name->name,
.tolen = name->len
};
struct nfs3_linkres res;
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_LINK],
.rpc_argp = &arg,
.rpc_resp = &res,
};
int status = -ENOMEM;
dprintk("NFS call link %s\n", name->name);
res.fattr = nfs_alloc_fattr();
res.dir_attr = nfs_alloc_fattr();
if (res.fattr == NULL || res.dir_attr == NULL)
goto out;
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
nfs_post_op_update_inode(dir, res.dir_attr);
nfs_post_op_update_inode(inode, res.fattr);
out:
nfs_free_fattr(res.dir_attr);
nfs_free_fattr(res.fattr);
dprintk("NFS reply link: %d\n", status);
return status;
}
static int
nfs3_proc_symlink(struct inode *dir, struct dentry *dentry, struct page *page,
unsigned int len, struct iattr *sattr)
{
struct nfs3_createdata *data;
struct dentry *d_alias;
int status = -ENOMEM;
if (len > NFS3_MAXPATHLEN)
return -ENAMETOOLONG;
dprintk("NFS call symlink %pd\n", dentry);
data = nfs3_alloc_createdata();
if (data == NULL)
goto out;
data->msg.rpc_proc = &nfs3_procedures[NFS3PROC_SYMLINK];
data->arg.symlink.fromfh = NFS_FH(dir);
data->arg.symlink.fromname = dentry->d_name.name;
data->arg.symlink.fromlen = dentry->d_name.len;
data->arg.symlink.pages = &page;
data->arg.symlink.pathlen = len;
data->arg.symlink.sattr = sattr;
d_alias = nfs3_do_create(dir, dentry, data);
status = PTR_ERR_OR_ZERO(d_alias);
if (status == 0)
dput(d_alias);
nfs3_free_createdata(data);
out:
dprintk("NFS reply symlink: %d\n", status);
return status;
}
static int
nfs3_proc_mkdir(struct inode *dir, struct dentry *dentry, struct iattr *sattr)
{
struct posix_acl *default_acl, *acl;
struct nfs3_createdata *data;
struct dentry *d_alias;
int status = -ENOMEM;
dprintk("NFS call mkdir %pd\n", dentry);
data = nfs3_alloc_createdata();
if (data == NULL)
goto out;
status = posix_acl_create(dir, &sattr->ia_mode, &default_acl, &acl);
if (status)
goto out;
data->msg.rpc_proc = &nfs3_procedures[NFS3PROC_MKDIR];
data->arg.mkdir.fh = NFS_FH(dir);
data->arg.mkdir.name = dentry->d_name.name;
data->arg.mkdir.len = dentry->d_name.len;
data->arg.mkdir.sattr = sattr;
d_alias = nfs3_do_create(dir, dentry, data);
status = PTR_ERR_OR_ZERO(d_alias);
if (status != 0)
goto out_release_acls;
if (d_alias)
dentry = d_alias;
status = nfs3_proc_setacls(d_inode(dentry), acl, default_acl);
dput(d_alias);
out_release_acls:
posix_acl_release(acl);
posix_acl_release(default_acl);
out:
nfs3_free_createdata(data);
dprintk("NFS reply mkdir: %d\n", status);
return status;
}
static int
nfs3_proc_rmdir(struct inode *dir, const struct qstr *name)
{
struct nfs_fattr *dir_attr;
struct nfs3_diropargs arg = {
.fh = NFS_FH(dir),
.name = name->name,
.len = name->len
};
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_RMDIR],
.rpc_argp = &arg,
};
int status = -ENOMEM;
dprintk("NFS call rmdir %s\n", name->name);
dir_attr = nfs_alloc_fattr();
if (dir_attr == NULL)
goto out;
msg.rpc_resp = dir_attr;
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
nfs_post_op_update_inode(dir, dir_attr);
nfs_free_fattr(dir_attr);
out:
dprintk("NFS reply rmdir: %d\n", status);
return status;
}
/*
* The READDIR implementation is somewhat hackish - we pass the user buffer
* to the encode function, which installs it in the receive iovec.
* The decode function itself doesn't perform any decoding, it just makes
* sure the reply is syntactically correct.
*
* Also note that this implementation handles both plain readdir and
* readdirplus.
*/
static int nfs3_proc_readdir(struct nfs_readdir_arg *nr_arg,
struct nfs_readdir_res *nr_res)
{
struct inode *dir = d_inode(nr_arg->dentry);
struct nfs3_readdirargs arg = {
.fh = NFS_FH(dir),
.cookie = nr_arg->cookie,
.plus = nr_arg->plus,
.count = nr_arg->page_len,
.pages = nr_arg->pages
};
struct nfs3_readdirres res = {
.verf = nr_res->verf,
.plus = nr_arg->plus,
};
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_READDIR],
.rpc_argp = &arg,
.rpc_resp = &res,
.rpc_cred = nr_arg->cred,
};
int status = -ENOMEM;
if (nr_arg->plus)
msg.rpc_proc = &nfs3_procedures[NFS3PROC_READDIRPLUS];
if (arg.cookie)
memcpy(arg.verf, nr_arg->verf, sizeof(arg.verf));
dprintk("NFS call readdir%s %llu\n", nr_arg->plus ? "plus" : "",
(unsigned long long)nr_arg->cookie);
res.dir_attr = nfs_alloc_fattr();
if (res.dir_attr == NULL)
goto out;
status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0);
nfs_invalidate_atime(dir);
nfs_refresh_inode(dir, res.dir_attr);
nfs_free_fattr(res.dir_attr);
out:
dprintk("NFS reply readdir%s: %d\n", nr_arg->plus ? "plus" : "",
status);
return status;
}
static int
nfs3_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
dev_t rdev)
{
struct posix_acl *default_acl, *acl;
struct nfs3_createdata *data;
struct dentry *d_alias;
int status = -ENOMEM;
dprintk("NFS call mknod %pd %u:%u\n", dentry,
MAJOR(rdev), MINOR(rdev));
data = nfs3_alloc_createdata();
if (data == NULL)
goto out;
status = posix_acl_create(dir, &sattr->ia_mode, &default_acl, &acl);
if (status)
goto out;
data->msg.rpc_proc = &nfs3_procedures[NFS3PROC_MKNOD];
data->arg.mknod.fh = NFS_FH(dir);
data->arg.mknod.name = dentry->d_name.name;
data->arg.mknod.len = dentry->d_name.len;
data->arg.mknod.sattr = sattr;
data->arg.mknod.rdev = rdev;
switch (sattr->ia_mode & S_IFMT) {
case S_IFBLK:
data->arg.mknod.type = NF3BLK;
break;
case S_IFCHR:
data->arg.mknod.type = NF3CHR;
break;
case S_IFIFO:
data->arg.mknod.type = NF3FIFO;
break;
case S_IFSOCK:
data->arg.mknod.type = NF3SOCK;
break;
default:
status = -EINVAL;
goto out_release_acls;
}
d_alias = nfs3_do_create(dir, dentry, data);
status = PTR_ERR_OR_ZERO(d_alias);
if (status != 0)
goto out_release_acls;
if (d_alias)
dentry = d_alias;
status = nfs3_proc_setacls(d_inode(dentry), acl, default_acl);
dput(d_alias);
out_release_acls:
posix_acl_release(acl);
posix_acl_release(default_acl);
out:
nfs3_free_createdata(data);
dprintk("NFS reply mknod: %d\n", status);
return status;
}
static int
nfs3_proc_statfs(struct nfs_server *server, struct nfs_fh *fhandle,
struct nfs_fsstat *stat)
{
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_FSSTAT],
.rpc_argp = fhandle,
.rpc_resp = stat,
};
int status;
dprintk("NFS call fsstat\n");
nfs_fattr_init(stat->fattr);
status = rpc_call_sync(server->client, &msg, 0);
dprintk("NFS reply fsstat: %d\n", status);
return status;
}
static int
do_proc_fsinfo(struct rpc_clnt *client, struct nfs_fh *fhandle,
struct nfs_fsinfo *info)
{
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_FSINFO],
.rpc_argp = fhandle,
.rpc_resp = info,
};
int status;
dprintk("NFS call fsinfo\n");
nfs_fattr_init(info->fattr);
status = rpc_call_sync(client, &msg, 0);
dprintk("NFS reply fsinfo: %d\n", status);
return status;
}
/*
* Bare-bones access to fsinfo: this is for nfs_get_root/nfs_get_sb via
* nfs_create_server
*/
static int
nfs3_proc_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle,
struct nfs_fsinfo *info)
{
int status;
status = do_proc_fsinfo(server->client, fhandle, info);
if (status && server->nfs_client->cl_rpcclient != server->client)
status = do_proc_fsinfo(server->nfs_client->cl_rpcclient, fhandle, info);
return status;
}
static int
nfs3_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle,
struct nfs_pathconf *info)
{
struct rpc_message msg = {
.rpc_proc = &nfs3_procedures[NFS3PROC_PATHCONF],
.rpc_argp = fhandle,
.rpc_resp = info,
};
int status;
dprintk("NFS call pathconf\n");
nfs_fattr_init(info->fattr);
status = rpc_call_sync(server->client, &msg, 0);
dprintk("NFS reply pathconf: %d\n", status);
return status;
}
static int nfs3_read_done(struct rpc_task *task, struct nfs_pgio_header *hdr)
{
struct inode *inode = hdr->inode;
struct nfs_server *server = NFS_SERVER(inode);
if (hdr->pgio_done_cb != NULL)
return hdr->pgio_done_cb(task, hdr);
if (nfs3_async_handle_jukebox(task, inode))
return -EAGAIN;
if (task->tk_status >= 0 && !server->read_hdrsize)
cmpxchg(&server->read_hdrsize, 0, hdr->res.replen);
nfs_invalidate_atime(inode);
nfs_refresh_inode(inode, &hdr->fattr);
return 0;
}
static void nfs3_proc_read_setup(struct nfs_pgio_header *hdr,
struct rpc_message *msg)
{
msg->rpc_proc = &nfs3_procedures[NFS3PROC_READ];
hdr->args.replen = NFS_SERVER(hdr->inode)->read_hdrsize;
}
static int nfs3_proc_pgio_rpc_prepare(struct rpc_task *task,
struct nfs_pgio_header *hdr)
{
rpc_call_start(task);
NFSv4: Don't try to recover NFSv4 locks when they are lost. When an NFSv4 client loses contact with the server it can lose any locks that it holds. Currently when it reconnects to the server it simply tries to reclaim those locks. This might succeed even though some other client has held and released a lock in the mean time. So the first client might think the file is unchanged, but it isn't. This isn't good. If, when recovery happens, the locks cannot be claimed because some other client still holds the lock, then we get a message in the kernel logs, but the client can still write. So two clients can both think they have a lock and can both write at the same time. This is equally not good. There was a patch a while ago http://comments.gmane.org/gmane.linux.nfs/41917 which tried to address some of this, but it didn't seem to go anywhere. That patch would also send a signal to the process. That might be useful but for now this patch just causes writes to fail. For NFSv4 (unlike v2/v3) there is a strong link between the lock and the write request so we can fairly easily fail any IO of the lock is gone. While some applications might not expect this, it is still safer than allowing the write to succeed. Because this is a fairly big change in behaviour a module parameter, "recover_locks", is introduced which defaults to true (the current behaviour) but can be set to "false" to tell the client not to try to recover things that were lost. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-04 07:04:49 +00:00
return 0;
}
static int nfs3_write_done(struct rpc_task *task, struct nfs_pgio_header *hdr)
{
struct inode *inode = hdr->inode;
if (hdr->pgio_done_cb != NULL)
return hdr->pgio_done_cb(task, hdr);
if (nfs3_async_handle_jukebox(task, inode))
return -EAGAIN;
if (task->tk_status >= 0)
nfs_writeback_update_inode(hdr);
return 0;
}
static void nfs3_proc_write_setup(struct nfs_pgio_header *hdr,
struct rpc_message *msg,
struct rpc_clnt **clnt)
{
msg->rpc_proc = &nfs3_procedures[NFS3PROC_WRITE];
}
static void nfs3_proc_commit_rpc_prepare(struct rpc_task *task, struct nfs_commit_data *data)
{
rpc_call_start(task);
}
static int nfs3_commit_done(struct rpc_task *task, struct nfs_commit_data *data)
{
if (data->commit_done_cb != NULL)
return data->commit_done_cb(task, data);
if (nfs3_async_handle_jukebox(task, data->inode))
return -EAGAIN;
nfs_refresh_inode(data->inode, data->res.fattr);
return 0;
}
static void nfs3_proc_commit_setup(struct nfs_commit_data *data, struct rpc_message *msg,
struct rpc_clnt **clnt)
{
msg->rpc_proc = &nfs3_procedures[NFS3PROC_COMMIT];
}
static void nfs3_nlm_alloc_call(void *data)
{
struct nfs_lock_context *l_ctx = data;
if (l_ctx && test_bit(NFS_CONTEXT_UNLOCK, &l_ctx->open_context->flags)) {
get_nfs_open_context(l_ctx->open_context);
nfs_get_lock_context(l_ctx->open_context);
}
}
static bool nfs3_nlm_unlock_prepare(struct rpc_task *task, void *data)
{
struct nfs_lock_context *l_ctx = data;
if (l_ctx && test_bit(NFS_CONTEXT_UNLOCK, &l_ctx->open_context->flags))
return nfs_async_iocounter_wait(task, l_ctx);
return false;
}
static void nfs3_nlm_release_call(void *data)
{
struct nfs_lock_context *l_ctx = data;
struct nfs_open_context *ctx;
if (l_ctx && test_bit(NFS_CONTEXT_UNLOCK, &l_ctx->open_context->flags)) {
ctx = l_ctx->open_context;
nfs_put_lock_context(l_ctx);
put_nfs_open_context(ctx);
}
}
static const struct nlmclnt_operations nlmclnt_fl_close_lock_ops = {
.nlmclnt_alloc_call = nfs3_nlm_alloc_call,
.nlmclnt_unlock_prepare = nfs3_nlm_unlock_prepare,
.nlmclnt_release_call = nfs3_nlm_release_call,
};
static int
nfs3_proc_lock(struct file *filp, int cmd, struct file_lock *fl)
{
struct inode *inode = file_inode(filp);
struct nfs_lock_context *l_ctx = NULL;
struct nfs_open_context *ctx = nfs_file_open_context(filp);
int status;
if (fl->fl_flags & FL_CLOSE) {
l_ctx = nfs_get_lock_context(ctx);
if (IS_ERR(l_ctx))
l_ctx = NULL;
else
set_bit(NFS_CONTEXT_UNLOCK, &ctx->flags);
}
status = nlmclnt_proc(NFS_SERVER(inode)->nlm_host, cmd, fl, l_ctx);
if (l_ctx)
nfs_put_lock_context(l_ctx);
return status;
}
static int nfs3_have_delegation(struct inode *inode, fmode_t flags)
{
return 0;
}
static const struct inode_operations nfs3_dir_inode_operations = {
.create = nfs_create,
.lookup = nfs_lookup,
.link = nfs_link,
.unlink = nfs_unlink,
.symlink = nfs_symlink,
.mkdir = nfs_mkdir,
.rmdir = nfs_rmdir,
.mknod = nfs_mknod,
.rename = nfs_rename,
.permission = nfs_permission,
.getattr = nfs_getattr,
.setattr = nfs_setattr,
#ifdef CONFIG_NFS_V3_ACL
.listxattr = nfs3_listxattr,
.get_acl = nfs3_get_acl,
.set_acl = nfs3_set_acl,
#endif
};
static const struct inode_operations nfs3_file_inode_operations = {
.permission = nfs_permission,
.getattr = nfs_getattr,
.setattr = nfs_setattr,
#ifdef CONFIG_NFS_V3_ACL
.listxattr = nfs3_listxattr,
.get_acl = nfs3_get_acl,
.set_acl = nfs3_set_acl,
#endif
};
const struct nfs_rpc_ops nfs_v3_clientops = {
.version = 3, /* protocol version */
.dentry_ops = &nfs_dentry_operations,
.dir_inode_ops = &nfs3_dir_inode_operations,
.file_inode_ops = &nfs3_file_inode_operations,
.file_ops = &nfs_file_operations,
.nlmclnt_ops = &nlmclnt_fl_close_lock_ops,
.getroot = nfs3_proc_get_root,
.submount = nfs_submount,
NFS: Add fs_context support. Add filesystem context support to NFS, parsing the options in advance and attaching the information to struct nfs_fs_context. The highlights are: (*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. This structure represents NFS's superblock config. (*) Make use of the VFS's parsing support to split comma-separated lists (*) Pin the NFS protocol module in the nfs_fs_context. (*) Attach supplementary error information to fs_context. This has the downside that these strings must be static and can't be formatted. (*) Remove the auxiliary file_system_type structs since the information necessary can be conveyed in the nfs_fs_context struct instead. (*) Root mounts are made by duplicating the config for the requested mount so as to have the same parameters. Submounts pick up their parameters from the parent superblock. [AV -- retrans is u32, not string] [SM -- Renamed cfg to ctx in a few functions in an earlier patch] [SM -- Moved fs_context mount option parsing to an earlier patch] [SM -- Moved fs_context error logging to a later patch] [SM -- Fixed printks in nfs4_try_get_tree() and nfs4_get_referral_tree()] [SM -- Added is_remount_fc() helper] [SM -- Deferred some refactoring to a later patch] [SM -- Fixed referral mounts, which were broken in the original patch] [SM -- Fixed leak of nfs_fattr when fs_context is freed] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-12-10 12:31:13 +00:00
.try_get_tree = nfs_try_get_tree,
.getattr = nfs3_proc_getattr,
.setattr = nfs3_proc_setattr,
.lookup = nfs3_proc_lookup,
.lookupp = nfs3_proc_lookupp,
.access = nfs3_proc_access,
.readlink = nfs3_proc_readlink,
.create = nfs3_proc_create,
.remove = nfs3_proc_remove,
.unlink_setup = nfs3_proc_unlink_setup,
.unlink_rpc_prepare = nfs3_proc_unlink_rpc_prepare,
.unlink_done = nfs3_proc_unlink_done,
.rename_setup = nfs3_proc_rename_setup,
.rename_rpc_prepare = nfs3_proc_rename_rpc_prepare,
.rename_done = nfs3_proc_rename_done,
.link = nfs3_proc_link,
.symlink = nfs3_proc_symlink,
.mkdir = nfs3_proc_mkdir,
.rmdir = nfs3_proc_rmdir,
.readdir = nfs3_proc_readdir,
.mknod = nfs3_proc_mknod,
.statfs = nfs3_proc_statfs,
.fsinfo = nfs3_proc_fsinfo,
.pathconf = nfs3_proc_pathconf,
.decode_dirent = nfs3_decode_dirent,
.pgio_rpc_prepare = nfs3_proc_pgio_rpc_prepare,
.read_setup = nfs3_proc_read_setup,
.read_done = nfs3_read_done,
.write_setup = nfs3_proc_write_setup,
.write_done = nfs3_write_done,
.commit_setup = nfs3_proc_commit_setup,
.commit_rpc_prepare = nfs3_proc_commit_rpc_prepare,
.commit_done = nfs3_commit_done,
.lock = nfs3_proc_lock,
.clear_acl_cache = forget_all_cached_acls,
.close_context = nfs_close_context,
.have_delegation = nfs3_have_delegation,
.alloc_client = nfs_alloc_client,
.init_client = nfs_init_client,
.free_client = nfs_free_client,
.create_server = nfs3_create_server,
.clone_server = nfs3_clone_server,
};