linux/tools/perf/builtin-buildid-cache.c

555 lines
13 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* builtin-buildid-cache.c
*
* Builtin buildid-cache command: Manages build-id cache
*
* Copyright (C) 2010, Red Hat Inc.
* Copyright (C) 2010, Arnaldo Carvalho de Melo <acme@redhat.com>
*/
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
#include <dirent.h>
#include <errno.h>
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
#include <unistd.h>
#include "builtin.h"
#include "namespaces.h"
#include "util/debug.h"
#include "util/header.h"
#include <subcmd/pager.h>
#include <subcmd/parse-options.h>
#include "util/strlist.h"
#include "util/build-id.h"
#include "util/session.h"
#include "util/dso.h"
#include "util/symbol.h"
#include "util/time-utils.h"
#include "util/util.h"
#include "util/probe-file.h"
#include "util/config.h"
#include <linux/string.h>
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 07:20:49 +00:00
#include <linux/err.h>
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
static int build_id_cache__kcore_buildid(const char *proc_dir, char *sbuildid)
{
char root_dir[PATH_MAX];
char *p;
strlcpy(root_dir, proc_dir, sizeof(root_dir));
p = strrchr(root_dir, '/');
if (!p)
return -1;
*p = '\0';
return sysfs__sprintf_build_id(root_dir, sbuildid);
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
}
static int build_id_cache__kcore_dir(char *dir, size_t sz)
{
return fetch_current_timestamp(dir, sz);
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
}
static bool same_kallsyms_reloc(const char *from_dir, char *to_dir)
{
char from[PATH_MAX];
char to[PATH_MAX];
const char *name;
u64 addr1 = 0, addr2 = 0;
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 00:21:09 +00:00
int i, err = -1;
scnprintf(from, sizeof(from), "%s/kallsyms", from_dir);
scnprintf(to, sizeof(to), "%s/kallsyms", to_dir);
for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 00:21:09 +00:00
err = kallsyms__get_function_start(from, name, &addr1);
if (!err)
break;
}
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 00:21:09 +00:00
if (err)
return false;
if (kallsyms__get_function_start(to, name, &addr2))
return false;
return addr1 == addr2;
}
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
static int build_id_cache__kcore_existing(const char *from_dir, char *to_dir,
size_t to_dir_sz)
{
char from[PATH_MAX];
char to[PATH_MAX];
char to_subdir[PATH_MAX];
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
struct dirent *dent;
int ret = -1;
DIR *d;
d = opendir(to_dir);
if (!d)
return -1;
scnprintf(from, sizeof(from), "%s/modules", from_dir);
while (1) {
dent = readdir(d);
if (!dent)
break;
if (dent->d_type != DT_DIR)
continue;
scnprintf(to, sizeof(to), "%s/%s/modules", to_dir,
dent->d_name);
scnprintf(to_subdir, sizeof(to_subdir), "%s/%s",
to_dir, dent->d_name);
if (!compare_proc_modules(from, to) &&
same_kallsyms_reloc(from_dir, to_subdir)) {
strlcpy(to_dir, to_subdir, to_dir_sz);
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
ret = 0;
break;
}
}
closedir(d);
return ret;
}
static int build_id_cache__add_kcore(const char *filename, bool force)
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
{
char dir[32], sbuildid[SBUILD_ID_SIZE];
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
char from_dir[PATH_MAX], to_dir[PATH_MAX];
char *p;
strlcpy(from_dir, filename, sizeof(from_dir));
p = strrchr(from_dir, '/');
if (!p || strcmp(p + 1, "kcore"))
return -1;
*p = '\0';
if (build_id_cache__kcore_buildid(from_dir, sbuildid) < 0)
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
return -1;
scnprintf(to_dir, sizeof(to_dir), "%s/%s/%s",
buildid_dir, DSO__NAME_KCORE, sbuildid);
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
if (!force &&
!build_id_cache__kcore_existing(from_dir, to_dir, sizeof(to_dir))) {
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
pr_debug("same kcore found in %s\n", to_dir);
return 0;
}
if (build_id_cache__kcore_dir(dir, sizeof(dir)))
return -1;
scnprintf(to_dir, sizeof(to_dir), "%s/%s/%s/%s",
buildid_dir, DSO__NAME_KCORE, sbuildid, dir);
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
if (mkdir_p(to_dir, 0755))
return -1;
if (kcore_copy(from_dir, to_dir)) {
/* Remove YYYYmmddHHMMSShh directory */
if (!rmdir(to_dir)) {
p = strrchr(to_dir, '/');
if (p)
*p = '\0';
/* Try to remove buildid directory */
if (!rmdir(to_dir)) {
p = strrchr(to_dir, '/');
if (p)
*p = '\0';
/* Try to remove [kernel.kcore] directory */
rmdir(to_dir);
}
}
return -1;
}
pr_debug("kcore added to build-id cache directory %s\n", to_dir);
return 0;
}
static int build_id_cache__add_file(const char *filename, struct nsinfo *nsi)
{
char sbuild_id[SBUILD_ID_SIZE];
struct build_id bid;
int err;
struct nscookie nsc;
nsinfo__mountns_enter(nsi, &nsc);
err = filename__read_build_id(filename, &bid);
nsinfo__mountns_exit(&nsc);
if (err < 0) {
pr_debug("Couldn't read a build-id in %s\n", filename);
return -1;
}
build_id__sprintf(&bid, sbuild_id);
err = build_id_cache__add_s(sbuild_id, filename, nsi,
perf tools: Back [vdso] DSO with real data Storing data for VDSO shared object, because we need it for the post unwind processing. The VDSO shared object is same for all process on a running system, so it makes no difference when we store it inside the tracer - perf. When [vdso] map memory is hit, we retrieve [vdso] DSO image and store it into temporary file. During the build-id processing phase, the [vdso] DSO image is stored in build-id db, and build-id reference is made inside perf.data. The build-id vdso file object is called '[vdso]'. We don't use temporary file name which gets removed when record is finished. During report phase the vdso build-id object is treated as any other build-id DSO object. Adding following API for vdso object: bool is_vdso_map(const char *filename) - returns true if the filename matches vdso map name struct dso *vdso__dso_findnew(struct list_head *head) - find/create proper vdso DSO object vdso__exit(void) - removes temporary VDSO image if there's any This change makes backtrace dwarf post unwind possible from [vdso] maps. Following output is current report of [vdso] sample dwarf backtrace: # Overhead Command Shared Object Symbol # ........ ....... ................. ............................. # 99.52% ex [vdso] [.] 0x00007fff3ace89af | --- 0x7fff3ace89af Following output is new report of [vdso] sample dwarf backtrace: # Overhead Command Shared Object Symbol # ........ ....... ................. ............................. # 99.52% ex [vdso] [.] 0x00000000000009af | --- 0x7fff3ace89af main __libc_start_main _start Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347295819-23177-5-git-send-email-jolsa@redhat.com [ committer note: s/ALIGN/PERF_ALIGN/g to cope with the android build changes ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-10 16:50:19 +00:00
false, false);
pr_debug("Adding %s %s: %s\n", sbuild_id, filename,
err ? "FAIL" : "Ok");
return err;
}
static int build_id_cache__remove_file(const char *filename, struct nsinfo *nsi)
{
char sbuild_id[SBUILD_ID_SIZE];
struct build_id bid;
struct nscookie nsc;
int err;
nsinfo__mountns_enter(nsi, &nsc);
err = filename__read_build_id(filename, &bid);
nsinfo__mountns_exit(&nsc);
if (err < 0) {
pr_debug("Couldn't read a build-id in %s\n", filename);
return -1;
}
build_id__sprintf(&bid, sbuild_id);
err = build_id_cache__remove_s(sbuild_id);
pr_debug("Removing %s %s: %s\n", sbuild_id, filename,
err ? "FAIL" : "Ok");
return err;
}
static int build_id_cache__purge_path(const char *pathname, struct nsinfo *nsi)
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
{
struct strlist *list;
struct str_node *pos;
int err;
err = build_id_cache__list_build_ids(pathname, nsi, &list);
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
if (err)
goto out;
strlist__for_each_entry(pos, list) {
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
err = build_id_cache__remove_s(pos->s);
pr_debug("Removing %s %s: %s\n", pos->s, pathname,
err ? "FAIL" : "Ok");
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
if (err)
break;
}
strlist__delete(list);
out:
pr_debug("Purging %s: %s\n", pathname, err ? "FAIL" : "Ok");
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
return err;
}
static int build_id_cache__purge_all(void)
{
struct strlist *list;
struct str_node *pos;
int err = 0;
char *buf;
list = build_id_cache__list_all(false);
if (!list) {
pr_debug("Failed to get buildids: -%d\n", errno);
return -EINVAL;
}
strlist__for_each_entry(pos, list) {
buf = build_id_cache__origname(pos->s);
err = build_id_cache__remove_s(pos->s);
pr_debug("Removing %s (%s): %s\n", buf, pos->s,
err ? "FAIL" : "Ok");
free(buf);
if (err)
break;
}
strlist__delete(list);
pr_debug("Purged all: %s\n", err ? "FAIL" : "Ok");
return err;
}
static bool dso__missing_buildid_cache(struct dso *dso, int parm __maybe_unused)
{
char filename[PATH_MAX];
struct build_id bid;
if (dso__build_id_filename(dso, filename, sizeof(filename), false) &&
filename__read_build_id(filename, &bid) == -1) {
if (errno == ENOENT)
return false;
pr_warning("Problems with %s file, consider removing it from the cache\n",
filename);
} else if (memcmp(dso->bid.data, bid.data, bid.size)) {
pr_warning("Problems with %s file, consider removing it from the cache\n",
filename);
}
return true;
}
static int build_id_cache__fprintf_missing(struct perf_session *session, FILE *fp)
{
perf_session__fprintf_dsos_buildid(session, fp, dso__missing_buildid_cache, 0);
return 0;
}
static int build_id_cache__update_file(const char *filename, struct nsinfo *nsi)
{
char sbuild_id[SBUILD_ID_SIZE];
struct build_id bid;
struct nscookie nsc;
int err;
nsinfo__mountns_enter(nsi, &nsc);
err = filename__read_build_id(filename, &bid);
nsinfo__mountns_exit(&nsc);
if (err < 0) {
pr_debug("Couldn't read a build-id in %s\n", filename);
return -1;
}
err = 0;
build_id__sprintf(&bid, sbuild_id);
if (build_id_cache__cached(sbuild_id))
err = build_id_cache__remove_s(sbuild_id);
if (!err)
err = build_id_cache__add_s(sbuild_id, filename, nsi, false,
false);
pr_debug("Updating %s %s: %s\n", sbuild_id, filename,
err ? "FAIL" : "Ok");
return err;
}
static int build_id_cache__show_all(void)
{
struct strlist *bidlist;
struct str_node *nd;
char *buf;
bidlist = build_id_cache__list_all(true);
if (!bidlist) {
pr_debug("Failed to get buildids: -%d\n", errno);
return -1;
}
strlist__for_each_entry(nd, bidlist) {
buf = build_id_cache__origname(nd->s);
fprintf(stdout, "%s %s\n", nd->s, buf);
free(buf);
}
strlist__delete(bidlist);
return 0;
}
static int perf_buildid_cache_config(const char *var, const char *value, void *cb)
{
struct perf_debuginfod *di = cb;
if (!strcmp(var, "buildid-cache.debuginfod")) {
di->urls = strdup(value);
if (!di->urls)
return -ENOMEM;
di->set = true;
}
return 0;
}
int cmd_buildid_cache(int argc, const char **argv)
{
struct strlist *list;
struct str_node *pos;
int ret, ns_id = -1;
bool force = false;
bool list_files = false;
bool opts_flag = false;
bool purge_all = false;
char const *add_name_list_str = NULL,
*remove_name_list_str = NULL,
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
*purge_name_list_str = NULL,
*missing_filename = NULL,
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
*update_name_list_str = NULL,
*kcore_filename = NULL;
struct perf_debuginfod debuginfod = { };
char sbuf[STRERR_BUFSIZE];
struct perf_data data = {
.mode = PERF_DATA_MODE_READ,
};
struct perf_session *session = NULL;
struct nsinfo *nsi = NULL;
const struct option buildid_cache_options[] = {
OPT_STRING('a', "add", &add_name_list_str,
"file list", "file(s) to add"),
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
OPT_STRING('k', "kcore", &kcore_filename,
"file", "kcore file to add"),
OPT_STRING('r', "remove", &remove_name_list_str, "file list",
"file(s) to remove"),
OPT_STRING('p', "purge", &purge_name_list_str, "file list",
"file(s) to remove (remove old caches too)"),
OPT_BOOLEAN('P', "purge-all", &purge_all, "purge all cached files"),
OPT_BOOLEAN('l', "list", &list_files, "list all cached files"),
OPT_STRING('M', "missing", &missing_filename, "file",
"to find missing build ids in the cache"),
OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_STRING('u', "update", &update_name_list_str, "file list",
"file(s) to update"),
OPT_STRING_OPTARG_SET(0, "debuginfod", &debuginfod.urls,
&debuginfod.set, "debuginfod urls",
"Enable debuginfod data retrieval from DEBUGINFOD_URLS or specified urls",
"system"),
OPT_INCR('v', "verbose", &verbose, "be more verbose"),
OPT_INTEGER(0, "target-ns", &ns_id, "target pid for namespace context"),
OPT_END()
};
const char * const buildid_cache_usage[] = {
"perf buildid-cache [<options>]",
NULL
};
ret = perf_config(perf_buildid_cache_config, &debuginfod);
if (ret)
return ret;
argc = parse_options(argc, argv, buildid_cache_options,
buildid_cache_usage, 0);
opts_flag = add_name_list_str || kcore_filename ||
remove_name_list_str || purge_name_list_str ||
missing_filename || update_name_list_str ||
purge_all;
if (argc || !(list_files || opts_flag))
usage_with_options(buildid_cache_usage, buildid_cache_options);
perf_debuginfod_setup(&debuginfod);
/* -l is exclusive. It can not be used with other options. */
if (list_files && opts_flag) {
usage_with_options_msg(buildid_cache_usage,
buildid_cache_options, "-l is exclusive.\n");
}
if (ns_id > 0)
nsi = nsinfo__new(ns_id);
if (missing_filename) {
data.path = missing_filename;
data.force = force;
session = perf_session__new(&data, NULL);
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 07:20:49 +00:00
if (IS_ERR(session))
return PTR_ERR(session);
}
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 06:40:45 +00:00
if (symbol__init(session ? &session->header.env : NULL) < 0)
goto out;
setup_pager();
if (list_files) {
ret = build_id_cache__show_all();
goto out;
}
if (add_name_list_str) {
list = strlist__new(add_name_list_str, NULL);
if (list) {
strlist__for_each_entry(pos, list)
if (build_id_cache__add_file(pos->s, nsi)) {
if (errno == EEXIST) {
pr_debug("%s already in the cache\n",
pos->s);
continue;
}
pr_warning("Couldn't add %s: %s\n",
pos->s, str_error_r(errno, sbuf, sizeof(sbuf)));
}
strlist__delete(list);
}
}
if (remove_name_list_str) {
list = strlist__new(remove_name_list_str, NULL);
if (list) {
strlist__for_each_entry(pos, list)
if (build_id_cache__remove_file(pos->s, nsi)) {
if (errno == ENOENT) {
pr_debug("%s wasn't in the cache\n",
pos->s);
continue;
}
pr_warning("Couldn't remove %s: %s\n",
pos->s, str_error_r(errno, sbuf, sizeof(sbuf)));
}
strlist__delete(list);
}
}
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
if (purge_name_list_str) {
list = strlist__new(purge_name_list_str, NULL);
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
if (list) {
strlist__for_each_entry(pos, list)
if (build_id_cache__purge_path(pos->s, nsi)) {
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
if (errno == ENOENT) {
pr_debug("%s wasn't in the cache\n",
pos->s);
continue;
}
pr_warning("Couldn't remove %s: %s\n",
pos->s, str_error_r(errno, sbuf, sizeof(sbuf)));
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 04:50:26 +00:00
}
strlist__delete(list);
}
}
if (purge_all) {
if (build_id_cache__purge_all()) {
pr_warning("Couldn't remove some caches. Error: %s.\n",
str_error_r(errno, sbuf, sizeof(sbuf)));
}
}
if (missing_filename)
ret = build_id_cache__fprintf_missing(session, stdout);
if (update_name_list_str) {
list = strlist__new(update_name_list_str, NULL);
if (list) {
strlist__for_each_entry(pos, list)
if (build_id_cache__update_file(pos->s, nsi)) {
if (errno == ENOENT) {
pr_debug("%s wasn't in the cache\n",
pos->s);
continue;
}
pr_warning("Couldn't update %s: %s\n",
pos->s, str_error_r(errno, sbuf, sizeof(sbuf)));
}
strlist__delete(list);
}
}
if (kcore_filename && build_id_cache__add_kcore(kcore_filename, force))
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 13:57:29 +00:00
pr_warning("Couldn't add %s\n", kcore_filename);
out:
perf_session__delete(session);
nsinfo__zput(nsi);
return ret;
}