linux/drivers/media/video/em28xx/em28xx-core.c

1238 lines
31 KiB
C
Raw Normal View History

/*
em28xx-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
Markus Rechberger <mrechberger@gmail.com>
Mauro Carvalho Chehab <mchehab@infradead.org>
Sascha Sommer <saschasommer@freenet.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
#include "em28xx.h"
/* #define ENABLE_DEBUG_ISOC_FRAMES */
static unsigned int core_debug;
module_param(core_debug, int, 0644);
MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
#define em28xx_coredbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static unsigned int reg_debug;
module_param(reg_debug, int, 0644);
MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
#define em28xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static int alt;
module_param(alt, int, 0644);
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
static unsigned int disable_vbi;
module_param(disable_vbi, int, 0644);
MODULE_PARM_DESC(disable_vbi, "disable vbi support");
/* FIXME */
#define em28xx_isocdbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
/*
* em28xx_read_reg_req()
* reads data from the usb device specifying bRequest
*/
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len)
{
int ret;
int pipe = usb_rcvctrlpipe(dev->udev, 0);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
if (len > URB_MAX_CTRL_SIZE)
return -EINVAL;
if (reg_debug) {
printk(KERN_DEBUG "(pipe 0x%08x): "
"IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
pipe,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, 0,
reg & 0xff, reg >> 8,
len & 0xff, len >> 8);
}
mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, pipe, req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, reg, dev->urb_buf, len, HZ);
if (ret < 0) {
if (reg_debug)
printk(" failed!\n");
mutex_unlock(&dev->ctrl_urb_lock);
return ret;
}
if (len)
memcpy(buf, dev->urb_buf, len);
mutex_unlock(&dev->ctrl_urb_lock);
if (reg_debug) {
int byte;
printk("<<<");
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
printk("\n");
}
return ret;
}
/*
* em28xx_read_reg_req()
* reads data from the usb device specifying bRequest
*/
int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
{
int ret;
u8 val;
ret = em28xx_read_reg_req_len(dev, req, reg, &val, 1);
if (ret < 0)
return ret;
return val;
}
int em28xx_read_reg(struct em28xx *dev, u16 reg)
{
return em28xx_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
}
/*
* em28xx_write_regs_req()
* sends data to the usb device, specifying bRequest
*/
int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int len)
{
int ret;
int pipe = usb_sndctrlpipe(dev->udev, 0);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
if (reg_debug) {
int byte;
printk(KERN_DEBUG "(pipe 0x%08x): "
"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
pipe,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, 0,
reg & 0xff, reg >> 8,
len & 0xff, len >> 8);
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
printk("\n");
}
mutex_lock(&dev->ctrl_urb_lock);
memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, pipe, req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, reg, dev->urb_buf, len, HZ);
mutex_unlock(&dev->ctrl_urb_lock);
if (dev->wait_after_write)
msleep(dev->wait_after_write);
return ret;
}
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
{
int rc;
rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
/* Stores GPO/GPIO values at the cache, if changed
Only write values should be stored, since input on a GPIO
register will return the input bits.
Not sure what happens on reading GPO register.
*/
if (rc >= 0) {
if (reg == dev->reg_gpo_num)
dev->reg_gpo = buf[0];
else if (reg == dev->reg_gpio_num)
dev->reg_gpio = buf[0];
}
return rc;
}
/* Write a single register */
int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
{
return em28xx_write_regs(dev, reg, &val, 1);
}
/*
* em28xx_write_reg_bits()
* sets only some bits (specified by bitmask) of a register, by first reading
* the actual value
*/
int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
u8 bitmask)
{
int oldval;
u8 newval;
/* Uses cache for gpo/gpio registers */
if (reg == dev->reg_gpo_num)
oldval = dev->reg_gpo;
else if (reg == dev->reg_gpio_num)
oldval = dev->reg_gpio;
else
oldval = em28xx_read_reg(dev, reg);
if (oldval < 0)
return oldval;
newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
return em28xx_write_regs(dev, reg, &newval, 1);
}
/*
* em28xx_is_ac97_ready()
* Checks if ac97 is ready
*/
static int em28xx_is_ac97_ready(struct em28xx *dev)
{
int ret, i;
/* Wait up to 50 ms for AC97 command to complete */
for (i = 0; i < 10; i++, msleep(5)) {
ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY);
if (ret < 0)
return ret;
if (!(ret & 0x01))
return 0;
}
em28xx_warn("AC97 command still being executed: not handled properly!\n");
return -EBUSY;
}
/*
* em28xx_read_ac97()
* write a 16 bit value to the specified AC97 address (LSB first!)
*/
int em28xx_read_ac97(struct em28xx *dev, u8 reg)
{
int ret;
u8 addr = (reg & 0x7f) | 0x80;
u16 val;
ret = em28xx_is_ac97_ready(dev);
if (ret < 0)
return ret;
ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
if (ret < 0)
return ret;
ret = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R40_AC97LSB,
(u8 *)&val, sizeof(val));
if (ret < 0)
return ret;
return le16_to_cpu(val);
}
/*
* em28xx_write_ac97()
* write a 16 bit value to the specified AC97 address (LSB first!)
*/
int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
{
int ret;
u8 addr = reg & 0x7f;
__le16 value;
value = cpu_to_le16(val);
ret = em28xx_is_ac97_ready(dev);
if (ret < 0)
return ret;
ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
if (ret < 0)
return ret;
ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
if (ret < 0)
return ret;
return 0;
}
struct em28xx_vol_table {
enum em28xx_amux mux;
u8 reg;
};
static struct em28xx_vol_table inputs[] = {
{ EM28XX_AMUX_VIDEO, AC97_VIDEO_VOL },
{ EM28XX_AMUX_LINE_IN, AC97_LINEIN_VOL },
{ EM28XX_AMUX_PHONE, AC97_PHONE_VOL },
{ EM28XX_AMUX_MIC, AC97_MIC_VOL },
{ EM28XX_AMUX_CD, AC97_CD_VOL },
{ EM28XX_AMUX_AUX, AC97_AUX_VOL },
{ EM28XX_AMUX_PCM_OUT, AC97_PCM_OUT_VOL },
};
static int set_ac97_input(struct em28xx *dev)
{
int ret, i;
enum em28xx_amux amux = dev->ctl_ainput;
/* EM28XX_AMUX_VIDEO2 is a special case used to indicate that
em28xx should point to LINE IN, while AC97 should use VIDEO
*/
if (amux == EM28XX_AMUX_VIDEO2)
amux = EM28XX_AMUX_VIDEO;
/* Mute all entres but the one that were selected */
for (i = 0; i < ARRAY_SIZE(inputs); i++) {
if (amux == inputs[i].mux)
ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808);
else
ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
inputs[i].reg);
}
return 0;
}
static int em28xx_set_audio_source(struct em28xx *dev)
{
int ret;
u8 input;
if (dev->board.is_em2800) {
if (dev->ctl_ainput == EM28XX_AMUX_VIDEO)
input = EM2800_AUDIO_SRC_TUNER;
else
input = EM2800_AUDIO_SRC_LINE;
ret = em28xx_write_regs(dev, EM2800_R08_AUDIOSRC, &input, 1);
if (ret < 0)
return ret;
}
if (dev->board.has_msp34xx)
input = EM28XX_AUDIO_SRC_TUNER;
else {
switch (dev->ctl_ainput) {
case EM28XX_AMUX_VIDEO:
input = EM28XX_AUDIO_SRC_TUNER;
break;
default:
input = EM28XX_AUDIO_SRC_LINE;
break;
}
}
if (dev->board.mute_gpio && dev->mute)
em28xx_gpio_set(dev, dev->board.mute_gpio);
else
em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
ret = em28xx_write_reg_bits(dev, EM28XX_R0E_AUDIOSRC, input, 0xc0);
if (ret < 0)
return ret;
msleep(5);
switch (dev->audio_mode.ac97) {
case EM28XX_NO_AC97:
break;
default:
ret = set_ac97_input(dev);
}
return ret;
}
static const struct em28xx_vol_table outputs[] = {
{ EM28XX_AOUT_MASTER, AC97_MASTER_VOL },
{ EM28XX_AOUT_LINE, AC97_LINE_LEVEL_VOL },
{ EM28XX_AOUT_MONO, AC97_MASTER_MONO_VOL },
{ EM28XX_AOUT_LFE, AC97_LFE_MASTER_VOL },
{ EM28XX_AOUT_SURR, AC97_SURR_MASTER_VOL },
};
int em28xx_audio_analog_set(struct em28xx *dev)
{
int ret, i;
u8 xclk;
if (!dev->audio_mode.has_audio)
return 0;
/* It is assumed that all devices use master volume for output.
It would be possible to use also line output.
*/
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
/* Mute all outputs */
for (i = 0; i < ARRAY_SIZE(outputs); i++) {
ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
outputs[i].reg);
}
}
xclk = dev->board.xclk & 0x7f;
if (!dev->mute)
xclk |= EM28XX_XCLK_AUDIO_UNMUTE;
ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
if (ret < 0)
return ret;
msleep(10);
/* Selects the proper audio input */
ret = em28xx_set_audio_source(dev);
/* Sets volume */
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
int vol;
em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200);
em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031);
em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80);
/* LSB: left channel - both channels with the same level */
vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
/* Mute device, if needed */
if (dev->mute)
vol |= 0x8000;
/* Sets volume */
for (i = 0; i < ARRAY_SIZE(outputs); i++) {
if (dev->ctl_aoutput & outputs[i].mux)
ret = em28xx_write_ac97(dev, outputs[i].reg,
vol);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
outputs[i].reg);
}
if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
int sel = ac97_return_record_select(dev->ctl_aoutput);
/* Use the same input for both left and right
channels */
sel |= (sel << 8);
em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
}
}
return ret;
}
EXPORT_SYMBOL_GPL(em28xx_audio_analog_set);
int em28xx_audio_setup(struct em28xx *dev)
{
int vid1, vid2, feat, cfg;
u32 vid;
if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874) {
/* Digital only device - don't load any alsa module */
dev->audio_mode.has_audio = 0;
dev->has_audio_class = 0;
dev->has_alsa_audio = 0;
return 0;
}
/* If device doesn't support Usb Audio Class, use vendor class */
if (!dev->has_audio_class)
dev->has_alsa_audio = 1;
dev->audio_mode.has_audio = 1;
/* See how this device is configured */
cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
em28xx_info("Config register raw data: 0x%02x\n", cfg);
if (cfg < 0) {
/* Register read error? */
cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
/* The device doesn't have vendor audio at all */
dev->has_alsa_audio = 0;
dev->audio_mode.has_audio = 0;
return 0;
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
em28xx_info("I2S Audio (3 sample rates)\n");
dev->audio_mode.i2s_3rates = 1;
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
em28xx_info("I2S Audio (5 sample rates)\n");
dev->audio_mode.i2s_5rates = 1;
}
if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
/* Skip the code that does AC97 vendor detection */
dev->audio_mode.ac97 = EM28XX_NO_AC97;
goto init_audio;
}
dev->audio_mode.ac97 = EM28XX_AC97_OTHER;
vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1);
if (vid1 < 0) {
/*
* Device likely doesn't support AC97
* Note: (some) em2800 devices without eeprom reports 0x91 on
* CHIPCFG register, even not having an AC97 chip
*/
em28xx_warn("AC97 chip type couldn't be determined\n");
dev->audio_mode.ac97 = EM28XX_NO_AC97;
dev->has_alsa_audio = 0;
dev->audio_mode.has_audio = 0;
goto init_audio;
}
vid2 = em28xx_read_ac97(dev, AC97_VENDOR_ID2);
if (vid2 < 0)
goto init_audio;
vid = vid1 << 16 | vid2;
dev->audio_mode.ac97_vendor_id = vid;
em28xx_warn("AC97 vendor ID = 0x%08x\n", vid);
feat = em28xx_read_ac97(dev, AC97_RESET);
if (feat < 0)
goto init_audio;
dev->audio_mode.ac97_feat = feat;
em28xx_warn("AC97 features = 0x%04x\n", feat);
/* Try to identify what audio processor we have */
if ((vid == 0xffffffff) && (feat == 0x6a90))
dev->audio_mode.ac97 = EM28XX_AC97_EM202;
else if ((vid >> 8) == 0x838476)
dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL;
init_audio:
/* Reports detected AC97 processor */
switch (dev->audio_mode.ac97) {
case EM28XX_NO_AC97:
em28xx_info("No AC97 audio processor\n");
break;
case EM28XX_AC97_EM202:
em28xx_info("Empia 202 AC97 audio processor detected\n");
break;
case EM28XX_AC97_SIGMATEL:
em28xx_info("Sigmatel audio processor detected(stac 97%02x)\n",
dev->audio_mode.ac97_vendor_id & 0xff);
break;
case EM28XX_AC97_OTHER:
em28xx_warn("Unknown AC97 audio processor detected!\n");
break;
default:
break;
}
return em28xx_audio_analog_set(dev);
}
EXPORT_SYMBOL_GPL(em28xx_audio_setup);
int em28xx_colorlevels_set_default(struct em28xx *dev)
{
em28xx_write_reg(dev, EM28XX_R20_YGAIN, 0x10); /* contrast */
em28xx_write_reg(dev, EM28XX_R21_YOFFSET, 0x00); /* brightness */
em28xx_write_reg(dev, EM28XX_R22_UVGAIN, 0x10); /* saturation */
em28xx_write_reg(dev, EM28XX_R23_UOFFSET, 0x00);
em28xx_write_reg(dev, EM28XX_R24_VOFFSET, 0x00);
em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, 0x00);
em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
em28xx_write_reg(dev, EM28XX_R16_GGAIN, 0x20);
em28xx_write_reg(dev, EM28XX_R17_BGAIN, 0x20);
em28xx_write_reg(dev, EM28XX_R18_ROFFSET, 0x00);
em28xx_write_reg(dev, EM28XX_R19_GOFFSET, 0x00);
return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
}
int em28xx_capture_start(struct em28xx *dev, int start)
{
int rc;
if (dev->chip_id == CHIP_ID_EM2874) {
/* The Transport Stream Enable Register moved in em2874 */
if (!start) {
rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
0x00,
EM2874_TS1_CAPTURE_ENABLE);
return rc;
}
/* Enable Transport Stream */
rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
EM2874_TS1_CAPTURE_ENABLE,
EM2874_TS1_CAPTURE_ENABLE);
return rc;
}
/* FIXME: which is the best order? */
/* video registers are sampled by VREF */
rc = em28xx_write_reg_bits(dev, EM28XX_R0C_USBSUSP,
start ? 0x10 : 0x00, 0x10);
if (rc < 0)
return rc;
if (!start) {
/* disable video capture */
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x27);
return rc;
}
if (dev->board.is_webcam)
rc = em28xx_write_reg(dev, 0x13, 0x0c);
/* enable video capture */
rc = em28xx_write_reg(dev, 0x48, 0x00);
if (dev->mode == EM28XX_ANALOG_MODE)
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
else
rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
msleep(6);
return rc;
}
int em28xx_vbi_supported(struct em28xx *dev)
{
/* Modprobe option to manually disable */
if (disable_vbi == 1)
return 0;
if (dev->chip_id == CHIP_ID_EM2860 ||
dev->chip_id == CHIP_ID_EM2883)
return 1;
/* Version of em28xx that does not support VBI */
return 0;
}
int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
u8 vinctrl;
ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
dev->format->reg | 0x20, 0xff);
if (ret < 0)
return ret;
ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
if (ret < 0)
return ret;
vinctrl = dev->vinctl;
if (em28xx_vbi_supported(dev) == 1) {
vinctrl |= EM28XX_VINCTRL_VBI_RAW;
em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, dev->vbi_width/4);
em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, dev->vbi_height);
if (dev->norm & V4L2_STD_525_60) {
/* NTSC */
em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
} else if (dev->norm & V4L2_STD_625_50) {
/* PAL */
em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x07);
}
}
return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
}
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
u8 ymin, u8 ymax)
{
em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n",
xmin, ymin, xmax, ymax);
em28xx_write_regs(dev, EM28XX_R28_XMIN, &xmin, 1);
em28xx_write_regs(dev, EM28XX_R29_XMAX, &xmax, 1);
em28xx_write_regs(dev, EM28XX_R2A_YMIN, &ymin, 1);
return em28xx_write_regs(dev, EM28XX_R2B_YMAX, &ymax, 1);
}
static int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
u16 width, u16 height)
{
u8 cwidth = width;
u8 cheight = height;
u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01);
em28xx_coredbg("em28xx Area Set: (%d,%d)\n",
(width | (overflow & 2) << 7),
(height | (overflow & 1) << 8));
em28xx_write_regs(dev, EM28XX_R1C_HSTART, &hstart, 1);
em28xx_write_regs(dev, EM28XX_R1D_VSTART, &vstart, 1);
em28xx_write_regs(dev, EM28XX_R1E_CWIDTH, &cwidth, 1);
em28xx_write_regs(dev, EM28XX_R1F_CHEIGHT, &cheight, 1);
return em28xx_write_regs(dev, EM28XX_R1B_OFLOW, &overflow, 1);
}
static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
{
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
if (dev->board.is_em2800) {
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
} else {
u8 buf[2];
buf[0] = h;
buf[1] = h >> 8;
em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
buf[0] = v;
buf[1] = v >> 8;
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
/* it seems that both H and V scalers must be active
to work correctly */
mode = (h || v) ? 0x30 : 0x00;
}
return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
}
/* FIXME: this only function read values from dev */
int em28xx_resolution_set(struct em28xx *dev)
{
int width, height;
width = norm_maxw(dev);
height = norm_maxh(dev);
/* Properly setup VBI */
dev->vbi_width = 720;
if (dev->norm & V4L2_STD_525_60)
dev->vbi_height = 12;
else
dev->vbi_height = 18;
if (!dev->progressive)
height >>= norm_maxh(dev);
em28xx_set_outfmt(dev);
em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
/* If we don't set the start position to 2 in VBI mode, we end up
with line 20/21 being YUYV encoded instead of being in 8-bit
greyscale. The core of the issue is that line 21 (and line 23 for
PAL WSS) are inside of active video region, and as a result they
get the pixelformatting associated with that area. So by cropping
it out, we end up with the same format as the rest of the VBI
region */
if (em28xx_vbi_supported(dev) == 1)
em28xx_capture_area_set(dev, 0, 2, width >> 2, height >> 2);
else
em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
int em28xx_set_alternate(struct em28xx *dev)
{
int errCode, prev_alt = dev->alt;
int i;
unsigned int min_pkt_size = dev->width * 2 + 4;
/*
* alt = 0 is used only for control messages, so, only values
* greater than 0 can be used for streaming.
*/
if (alt && alt < dev->num_alt) {
em28xx_coredbg("alternate forced to %d\n", dev->alt);
dev->alt = alt;
goto set_alt;
}
/* When image size is bigger than a certain value,
the frame size should be increased, otherwise, only
green screen will be received.
*/
if (dev->width * 2 * dev->height > 720 * 240 * 2)
min_pkt_size *= 2;
for (i = 0; i < dev->num_alt; i++) {
/* stop when the selected alt setting offers enough bandwidth */
if (dev->alt_max_pkt_size[i] >= min_pkt_size) {
dev->alt = i;
break;
/* otherwise make sure that we end up with the maximum bandwidth
because the min_pkt_size equation might be wrong...
*/
} else if (dev->alt_max_pkt_size[i] >
dev->alt_max_pkt_size[dev->alt])
dev->alt = i;
}
set_alt:
if (dev->alt != prev_alt) {
em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
min_pkt_size, dev->alt);
dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt];
em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n",
dev->alt, dev->max_pkt_size);
errCode = usb_set_interface(dev->udev, 0, dev->alt);
if (errCode < 0) {
em28xx_errdev("cannot change alternate number to %d (error=%i)\n",
dev->alt, errCode);
return errCode;
}
}
return 0;
}
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
{
int rc = 0;
if (!gpio)
return rc;
if (dev->mode != EM28XX_SUSPEND) {
em28xx_write_reg(dev, 0x48, 0x00);
if (dev->mode == EM28XX_ANALOG_MODE)
em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
else
em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
msleep(6);
}
/* Send GPIO reset sequences specified at board entry */
while (gpio->sleep >= 0) {
if (gpio->reg >= 0) {
rc = em28xx_write_reg_bits(dev,
gpio->reg,
gpio->val,
gpio->mask);
if (rc < 0)
return rc;
}
if (gpio->sleep > 0)
msleep(gpio->sleep);
gpio++;
}
return rc;
}
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
{
if (dev->mode == set_mode)
return 0;
if (set_mode == EM28XX_SUSPEND) {
dev->mode = set_mode;
/* FIXME: add suspend support for ac97 */
return em28xx_gpio_set(dev, dev->board.suspend_gpio);
}
dev->mode = set_mode;
if (dev->mode == EM28XX_DIGITAL_MODE)
return em28xx_gpio_set(dev, dev->board.dvb_gpio);
else
return em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
}
EXPORT_SYMBOL_GPL(em28xx_set_mode);
/* ------------------------------------------------------------------
URB control
------------------------------------------------------------------*/
/*
* IRQ callback, called by URB callback
*/
static void em28xx_irq_callback(struct urb *urb)
{
struct em28xx *dev = urb->context;
int rc, i;
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
case -ESHUTDOWN:
return;
default: /* error */
em28xx_isocdbg("urb completition error %d.\n", urb->status);
break;
}
/* Copy data from URB */
spin_lock(&dev->slock);
rc = dev->isoc_ctl.isoc_copy(dev, urb);
spin_unlock(&dev->slock);
/* Reset urb buffers */
for (i = 0; i < urb->number_of_packets; i++) {
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
urb->status = 0;
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
em28xx_isocdbg("urb resubmit failed (error=%i)\n",
urb->status);
}
}
/*
* Stop and Deallocate URBs
*/
void em28xx_uninit_isoc(struct em28xx *dev)
{
struct urb *urb;
int i;
em28xx_isocdbg("em28xx: called em28xx_uninit_isoc\n");
dev->isoc_ctl.nfields = -1;
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
urb = dev->isoc_ctl.urb[i];
if (urb) {
V4L/DVB (10325): em28xx: Fix for fail to submit URB with IRQs and Pre-emption Disabled Trace: (Provided by Douglas) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:558 in_atomic():0, irqs_disabled():1 Pid: 4918, comm: sox Not tainted 2.6.27.5 #1 [<c04246d8>] __might_sleep+0xc6/0xcb [<c058c8b0>] usb_kill_urb+0x1a/0xd8 [<c0488e68>] ? __kmalloc+0x9b/0xfc [<c0488e85>] ? __kmalloc+0xb8/0xfc [<c058cd5a>] ? usb_alloc_urb+0xf/0x31 [<f8dd638c>] em28xx_isoc_audio_deinit+0x2f/0x6c [em28xx_alsa] [<f8dd6573>] em28xx_cmd+0x1aa/0x1c5 [em28xx_alsa] [<f8dd65e1>] snd_em28xx_capture_trigger+0x53/0x68 [em28xx_alsa] [<f8aa8674>] snd_pcm_do_start+0x1c/0x23 [snd_pcm] [<f8aa85d7>] snd_pcm_action_single+0x25/0x4b [snd_pcm] [<f8aa9833>] snd_pcm_action+0x6a/0x76 [snd_pcm] [<f8aa98f5>] snd_pcm_start+0x14/0x16 [snd_pcm] [<f8aae10e>] snd_pcm_lib_read1+0x66/0x273 [snd_pcm] [<f8aac5a3>] ? snd_pcm_kernel_ioctl+0x46/0x5f [snd_pcm] [<f8aae4a7>] snd_pcm_lib_read+0xbf/0xcd [snd_pcm] [<f8aad774>] ? snd_pcm_lib_read_transfer+0x0/0xaf [snd_pcm] [<f89feeb6>] snd_pcm_oss_read3+0x99/0xdc [snd_pcm_oss] [<f89fef9c>] snd_pcm_oss_read2+0xa3/0xbf [snd_pcm_oss] [<c064169d>] ? _cond_resched+0x8/0x32 [<f89ff0be>] snd_pcm_oss_read+0x106/0x150 [snd_pcm_oss] [<f89fefb8>] ? snd_pcm_oss_read+0x0/0x150 [snd_pcm_oss] [<c048c6e2>] vfs_read+0x81/0xdc [<c048c7d6>] sys_read+0x3b/0x60 [<c04039bf>] sysenter_do_call+0x12/0x34 ======================= The culprit in the trace is snd_pcm_action() which invokes a spin lock which disables pre-emption which disables an IRQ which causes the __might_sleep() function to fail the irqs_disabled() test. Since pre-emption is enabled then it is safe to de-allocate the memory if you first unlink each URB. In this instance you are safe since pre-emption is disabled. If pre-emption and irqs are not disabled then call usb_kill_urb(), else call usb_unlink_urb(). Thanks to Douglas for tracking down this bug originally!!! [dougsland@redhat.com: Fixed codyingstyle] Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-25 16:08:07 +00:00
if (!irqs_disabled())
usb_kill_urb(urb);
else
usb_unlink_urb(urb);
if (dev->isoc_ctl.transfer_buffer[i]) {
usb_free_coherent(dev->udev,
urb->transfer_buffer_length,
dev->isoc_ctl.transfer_buffer[i],
urb->transfer_dma);
}
usb_free_urb(urb);
dev->isoc_ctl.urb[i] = NULL;
}
dev->isoc_ctl.transfer_buffer[i] = NULL;
}
kfree(dev->isoc_ctl.urb);
kfree(dev->isoc_ctl.transfer_buffer);
dev->isoc_ctl.urb = NULL;
dev->isoc_ctl.transfer_buffer = NULL;
dev->isoc_ctl.num_bufs = 0;
em28xx_capture_start(dev, 0);
}
EXPORT_SYMBOL_GPL(em28xx_uninit_isoc);
/*
* Allocate URBs and start IRQ
*/
int em28xx_init_isoc(struct em28xx *dev, int max_packets,
int num_bufs, int max_pkt_size,
int (*isoc_copy) (struct em28xx *dev, struct urb *urb))
{
struct em28xx_dmaqueue *dma_q = &dev->vidq;
struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;
int i;
int sb_size, pipe;
struct urb *urb;
int j, k;
int rc;
em28xx_isocdbg("em28xx: called em28xx_prepare_isoc\n");
/* De-allocates all pending stuff */
em28xx_uninit_isoc(dev);
dev->isoc_ctl.isoc_copy = isoc_copy;
dev->isoc_ctl.num_bufs = num_bufs;
dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
if (!dev->isoc_ctl.urb) {
em28xx_errdev("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
GFP_KERNEL);
if (!dev->isoc_ctl.transfer_buffer) {
em28xx_errdev("cannot allocate memory for usb transfer\n");
kfree(dev->isoc_ctl.urb);
return -ENOMEM;
}
dev->isoc_ctl.max_pkt_size = max_pkt_size;
dev->isoc_ctl.vid_buf = NULL;
dev->isoc_ctl.vbi_buf = NULL;
sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
/* allocate urbs and transfer buffers */
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
em28xx_err("cannot alloc isoc_ctl.urb %i\n", i);
em28xx_uninit_isoc(dev);
return -ENOMEM;
}
dev->isoc_ctl.urb[i] = urb;
dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev,
sb_size, GFP_KERNEL, &urb->transfer_dma);
if (!dev->isoc_ctl.transfer_buffer[i]) {
em28xx_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
em28xx_uninit_isoc(dev);
return -ENOMEM;
}
memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
/* FIXME: this is a hack - should be
'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK'
should also be using 'desc.bInterval'
*/
pipe = usb_rcvisocpipe(dev->udev,
dev->mode == EM28XX_ANALOG_MODE ? 0x82 : 0x84);
usb_fill_int_urb(urb, dev->udev, pipe,
dev->isoc_ctl.transfer_buffer[i], sb_size,
em28xx_irq_callback, dev, 1);
urb->number_of_packets = max_packets;
urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
k = 0;
for (j = 0; j < max_packets; j++) {
urb->iso_frame_desc[j].offset = k;
urb->iso_frame_desc[j].length =
dev->isoc_ctl.max_pkt_size;
k += dev->isoc_ctl.max_pkt_size;
}
}
init_waitqueue_head(&dma_q->wq);
init_waitqueue_head(&vbi_dma_q->wq);
em28xx_capture_start(dev, 1);
/* submit urbs and enables IRQ */
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
if (rc) {
em28xx_err("submit of urb %i failed (error=%i)\n", i,
rc);
em28xx_uninit_isoc(dev);
return rc;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(em28xx_init_isoc);
/* Determine the packet size for the DVB stream for the given device
(underlying value programmed into the eeprom) */
int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
{
unsigned int chip_cfg2;
unsigned int packet_size = 564;
if (dev->chip_id == CHIP_ID_EM2874) {
/* FIXME - for now assume 564 like it was before, but the
em2874 code should be added to return the proper value... */
packet_size = 564;
} else {
/* TS max packet size stored in bits 1-0 of R01 */
chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
case EM28XX_CHIPCFG2_TS_PACKETSIZE_188:
packet_size = 188;
break;
case EM28XX_CHIPCFG2_TS_PACKETSIZE_376:
packet_size = 376;
break;
case EM28XX_CHIPCFG2_TS_PACKETSIZE_564:
packet_size = 564;
break;
case EM28XX_CHIPCFG2_TS_PACKETSIZE_752:
packet_size = 752;
break;
}
}
em28xx_coredbg("dvb max packet size=%d\n", packet_size);
return packet_size;
}
EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
/*
* em28xx_wake_i2c()
* configure i2c attached devices
*/
void em28xx_wake_i2c(struct em28xx *dev)
{
v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
INPUT(dev->ctl_input)->vmux, 0, 0);
v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
}
/*
* Device control list
*/
static LIST_HEAD(em28xx_devlist);
static DEFINE_MUTEX(em28xx_devlist_mutex);
/*
* em28xx_realease_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconected or at module unload
*/
void em28xx_remove_from_devlist(struct em28xx *dev)
{
mutex_lock(&em28xx_devlist_mutex);
list_del(&dev->devlist);
mutex_unlock(&em28xx_devlist_mutex);
};
void em28xx_add_into_devlist(struct em28xx *dev)
{
mutex_lock(&em28xx_devlist_mutex);
list_add_tail(&dev->devlist, &em28xx_devlist);
mutex_unlock(&em28xx_devlist_mutex);
};
/*
* Extension interface
*/
static LIST_HEAD(em28xx_extension_devlist);
int em28xx_register_extension(struct em28xx_ops *ops)
{
struct em28xx *dev = NULL;
mutex_lock(&em28xx_devlist_mutex);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
ops->init(dev);
}
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_devlist_mutex);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
void em28xx_unregister_extension(struct em28xx_ops *ops)
{
struct em28xx *dev = NULL;
mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
ops->fini(dev);
}
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_devlist_mutex);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
void em28xx_init_extension(struct em28xx *dev)
{
struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
if (!list_empty(&em28xx_extension_devlist)) {
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
if (ops->init)
ops->init(dev);
}
}
mutex_unlock(&em28xx_devlist_mutex);
}
void em28xx_close_extension(struct em28xx *dev)
{
struct em28xx_ops *ops = NULL;
mutex_lock(&em28xx_devlist_mutex);
if (!list_empty(&em28xx_extension_devlist)) {
list_for_each_entry(ops, &em28xx_extension_devlist, next) {
if (ops->fini)
ops->fini(dev);
}
}
mutex_unlock(&em28xx_devlist_mutex);
}