linux/arch/blackfin/configs/BF518F-EZBRD_defconfig

CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_SLAB=y
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BF518=y
CONFIG_IRQ_TIMER0=12
# CONFIG_CYCLES_CLOCKSOURCE is not set
# CONFIG_SCHEDULE_L1 is not set
# CONFIG_MEMSET_L1 is not set
# CONFIG_MEMCPY_L1 is not set
# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
CONFIG_C_CDPRIO=y
CONFIG_BANK_3=0x99B2
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_BFIN=y
CONFIG_BFIN_MAC=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
CONFIG_SPI_BFIN5XX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_SDH_BFIN=y
CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=y
CONFIG_EXT2_FS=m
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HWERR=y
CONFIG_EXACT_HWERR=y
CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_EXPERIMENTAL=y`
			`CONFIG_SYSVIPC=y`
			`CONFIG_IKCONFIG=y`
			`CONFIG_IKCONFIG_PROC=y`
			`CONFIG_LOG_BUF_SHIFT=14`
			`CONFIG_BLK_DEV_INITRD=y`
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2011-01-20 22:44:16 +00:00			`CONFIG_EXPERT=y`
Blackfin arch: update board default configs Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-01-07 15:14:39 +00:00			`# CONFIG_ELF_CORE is not set`
Blackfin arch: update default kernel configuration Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-03-28 15:46:17 +00:00			`# CONFIG_FUTEX is not set`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-05-21 06:39:46 +00:00			`# CONFIG_SIGNALFD is not set`
			`# CONFIG_TIMERFD is not set`
			`# CONFIG_EVENTFD is not set`
Blackfin arch: update default kernel configuration Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-03-28 15:46:17 +00:00			`# CONFIG_AIO is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_SLAB=y`
Blackfin: update defconfigs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-06-23 13:43:06 +00:00			`CONFIG_MMAP_ALLOW_UNINITIALIZED=y`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_MODULES=y`
			`CONFIG_MODULE_UNLOAD=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-12-23 07:01:43 +00:00			`# CONFIG_LBDAF is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_BLK_DEV_BSG is not set`
			`# CONFIG_IOSCHED_DEADLINE is not set`
			`# CONFIG_IOSCHED_CFQ is not set`
			`CONFIG_PREEMPT_VOLUNTARY=y`
			`CONFIG_BF518=y`
Blackfin arch: merge adeos blackfin part to arch/blackfin/ [Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-01-07 15:14:39 +00:00			`CONFIG_IRQ_TIMER0=12`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_CYCLES_CLOCKSOURCE is not set`
			`# CONFIG_SCHEDULE_L1 is not set`
			`# CONFIG_MEMSET_L1 is not set`
			`# CONFIG_MEMCPY_L1 is not set`
			`# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set`
Blackfin: update defconfigs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-06-23 13:43:06 +00:00			`CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0`
Blackfin arch: update default kernel configuration Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-03-28 15:46:17 +00:00			`CONFIG_BFIN_GPTIMERS=m`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_C_CDPRIO=y`
Blackfin: increase default async timings for parallel flashes The default async timings are a little too fast for the parallel flash that is attached by default to the async banks. So slow things down a bit so accessing the hardware is stable. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-09-07 03:20:48 +00:00			`CONFIG_BANK_3=0x99B2`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_BINFMT_FLAT=y`
			`CONFIG_BINFMT_ZFLAT=y`
			`CONFIG_NET=y`
			`CONFIG_PACKET=y`
			`CONFIG_UNIX=y`
			`CONFIG_INET=y`
			`CONFIG_IP_PNP=y`
Blackfin: update defconfigs Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-06-17 07:11:42 +00:00			`# CONFIG_INET_XFRM_MODE_TRANSPORT is not set`
			`# CONFIG_INET_XFRM_MODE_TUNNEL is not set`
			`# CONFIG_INET_XFRM_MODE_BEET is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_INET_LRO is not set`
Blackfin: update defconfigs Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-06-17 07:11:42 +00:00			`# CONFIG_INET_DIAG is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_IPV6 is not set`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-12-23 07:01:43 +00:00			`# CONFIG_WIRELESS is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"`
			`# CONFIG_FW_LOADER is not set`
			`CONFIG_MTD=y`
			`CONFIG_MTD_BLOCK=y`
			`CONFIG_MTD_JEDECPROBE=m`
			`CONFIG_MTD_RAM=y`
			`CONFIG_MTD_ROM=m`
			`CONFIG_MTD_COMPLEX_MAPPINGS=y`
			`CONFIG_BLK_DEV_RAM=y`
			`CONFIG_NETDEVICES=y`
blackfin: update default defconfig Update default defconfig by selecting correct net device driver. Signed-off-by: Bob Liu <lliubbo@gmail.com> 2012-01-16 05:12:10 +00:00			`CONFIG_NET_BFIN=y`
Blackfin arch: enable bfin_eth in bf51x by default Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-02-04 08:49:45 +00:00			`CONFIG_BFIN_MAC=y`
blackfin: update default defconfig Update default defconfig by selecting correct net device driver. Signed-off-by: Bob Liu <lliubbo@gmail.com> 2012-01-16 05:12:10 +00:00			`# CONFIG_NET_VENDOR_BROADCOM is not set`
			`# CONFIG_NET_VENDOR_CHELSIO is not set`
			`# CONFIG_NET_VENDOR_INTEL is not set`
			`# CONFIG_NET_VENDOR_MARVELL is not set`
			`# CONFIG_NET_VENDOR_MICREL is not set`
			`# CONFIG_NET_VENDOR_MICROCHIP is not set`
			`# CONFIG_NET_VENDOR_NATSEMI is not set`
			`# CONFIG_NET_VENDOR_SEEQ is not set`
			`# CONFIG_NET_VENDOR_SMSC is not set`
			`# CONFIG_NET_VENDOR_STMICRO is not set`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-12-23 07:01:43 +00:00			`# CONFIG_WLAN is not set`
Blackfin: update defconfigs Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2010-08-03 06:47:21 +00:00			`# CONFIG_INPUT is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_SERIO is not set`
Blackfin: update defconfigs Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2010-08-03 06:47:21 +00:00			`# CONFIG_VT is not set`
blackfin: update default defconfig Update default defconfig by selecting correct net device driver. Signed-off-by: Bob Liu <lliubbo@gmail.com> 2012-01-16 05:12:10 +00:00			`# CONFIG_LEGACY_PTYS is not set`
Blackfin arch: build jtag tty driver as a module by default Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-02-04 08:49:45 +00:00			`CONFIG_BFIN_JTAG_COMM=m`
blackfin: update default defconfig Update default defconfig by selecting correct net device driver. Signed-off-by: Bob Liu <lliubbo@gmail.com> 2012-01-16 05:12:10 +00:00			`# CONFIG_DEVKMEM is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_SERIAL_BFIN=y`
			`CONFIG_SERIAL_BFIN_CONSOLE=y`
			`CONFIG_SERIAL_BFIN_UART0=y`
			`# CONFIG_HW_RANDOM is not set`
			`CONFIG_I2C=y`
			`CONFIG_I2C_CHARDEV=y`
			`CONFIG_I2C_BLACKFIN_TWI=y`
Blackfin arch: Set TWI/I2C Clock to 100kHz All slaves I'm aware of should support at least 100kHz Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-01-07 15:14:39 +00:00			`CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100`
Blackfin arch: update default kernel config, select KSZ8893M driver for BF518 Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-03-05 09:32:41 +00:00			`CONFIG_SPI=y`
blackfin: config: update def config for all boards Config name for spi controller driver has been modified in previous commit, so update default config accordingly. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> 2011-11-03 18:36:06 +00:00			`CONFIG_SPI_BFIN5XX=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-05-21 06:39:46 +00:00			`CONFIG_GPIOLIB=y`
			`CONFIG_GPIO_SYSFS=y`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_HWMON is not set`
			`CONFIG_WATCHDOG=y`
			`CONFIG_BFIN_WDT=y`
			`# CONFIG_USB_SUPPORT is not set`
Blackfin arch: update default kernel configuration Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-03-28 15:46:17 +00:00			`CONFIG_MMC=y`
Blackfin: update defconfigs Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2010-08-03 06:47:21 +00:00			`CONFIG_SDH_BFIN=y`
Blackfin arch: update default kernel configuration Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-03-28 15:46:17 +00:00			`CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_RTC_CLASS=y`
			`CONFIG_RTC_DRV_BFIN=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-05-21 06:39:46 +00:00			`CONFIG_EXT2_FS=m`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`# CONFIG_DNOTIFY is not set`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-05-21 06:39:46 +00:00			`CONFIG_VFAT_FS=m`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_NFS_FS=m`
			`CONFIG_NFS_V3=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-05-21 06:39:46 +00:00			`CONFIG_NLS_CODEPAGE_437=m`
			`CONFIG_NLS_CODEPAGE_936=m`
			`CONFIG_NLS_ISO8859_1=m`
			`CONFIG_NLS_UTF8=m`
			`CONFIG_DEBUG_SHIRQ=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-12-23 07:01:43 +00:00			`CONFIG_DETECT_HUNG_TASK=y`
Blackfin arch: update board default configs Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-01-07 15:14:39 +00:00			`CONFIG_DEBUG_INFO=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2009-12-23 07:01:43 +00:00			`# CONFIG_FTRACE is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_DEBUG_MMRS=y`
Blackfin: update defconfigs Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-05-21 06:39:46 +00:00			`CONFIG_DEBUG_HWERR=y`
			`CONFIG_EXACT_HWERR=y`
			`CONFIG_DEBUG_DOUBLEFAULT=y`
			`CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_EARLY_PRINTK=y`
			`CONFIG_CPLB_INFO=y`
Blackfin: ADI boards: enable pseudo debug insns support We use these insns when testing, so enable them by default for all of our development boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org> 2011-01-30 07:26:26 +00:00			`CONFIG_BFIN_PSEUDODBG_INSNS=y`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_CRYPTO=y`
Blackfin arch: update board default configs Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 2009-01-07 15:14:39 +00:00			`# CONFIG_CRYPTO_ANSI_CPRNG is not set`
Blackfin arch: add support for Blackfin latest processor family BF51x Signed-off-by: Bryan Wu <cooloney@kernel.org> 2008-11-18 09:48:21 +00:00			`CONFIG_CRC_CCITT=m`