linux/drivers/isdn/mISDN/dsp_core.c

1236 lines
33 KiB
C
Raw Normal View History

/*
* Author Andreas Eversberg (jolly@eversberg.eu)
* Based on source code structure by
* Karsten Keil (keil@isdn4linux.de)
*
* This file is (c) under GNU PUBLIC LICENSE
* For changes and modifications please read
* ../../../Documentation/isdn/mISDN.cert
*
* Thanks to Karsten Keil (great drivers)
* Cologne Chip (great chips)
*
* This module does:
* Real-time tone generation
* DTMF detection
* Real-time cross-connection and conferrence
* Compensate jitter due to system load and hardware fault.
* All features are done in kernel space and will be realized
* using hardware, if available and supported by chip set.
* Blowfish encryption/decryption
*/
/* STRUCTURE:
*
* The dsp module provides layer 2 for b-channels (64kbit). It provides
* transparent audio forwarding with special digital signal processing:
*
* - (1) generation of tones
* - (2) detection of dtmf tones
* - (3) crossconnecting and conferences (clocking)
* - (4) echo generation for delay test
* - (5) volume control
* - (6) disable receive data
* - (7) pipeline
* - (8) encryption/decryption
*
* Look:
* TX RX
* ------upper layer------
* | ^
* | |(6)
* v |
* +-----+-------------+-----+
* |(3)(4) |
* | CMX |
* | |
* | +-------------+
* | | ^
* | | |
* |+---------+| +----+----+
* ||(1) || |(2) |
* || || | |
* || Tones || | DTMF |
* || || | |
* || || | |
* |+----+----+| +----+----+
* +-----+-----+ ^
* | |
* v |
* +----+----+ +----+----+
* |(5) | |(5) |
* | | | |
* |TX Volume| |RX Volume|
* | | | |
* | | | |
* +----+----+ +----+----+
* | ^
* | |
* v |
* +----+-------------+----+
* |(7) |
* | |
* | Pipeline Processing |
* | |
* | |
* +----+-------------+----+
* | ^
* | |
* v |
* +----+----+ +----+----+
* |(8) | |(8) |
* | | | |
* | Encrypt | | Decrypt |
* | | | |
* | | | |
* +----+----+ +----+----+
* | ^
* | |
* v |
* ------card layer------
* TX RX
*
* Above you can see the logical data flow. If software is used to do the
* process, it is actually the real data flow. If hardware is used, data
* may not flow, but hardware commands to the card, to provide the data flow
* as shown.
*
* NOTE: The channel must be activated in order to make dsp work, even if
* no data flow to the upper layer is intended. Activation can be done
* after and before controlling the setting using PH_CONTROL requests.
*
* DTMF: Will be detected by hardware if possible. It is done before CMX
* processing.
*
* Tones: Will be generated via software if endless looped audio fifos are
* not supported by hardware. Tones will override all data from CMX.
* It is not required to join a conference to use tones at any time.
*
* CMX: Is transparent when not used. When it is used, it will do
* crossconnections and conferences via software if not possible through
* hardware. If hardware capability is available, hardware is used.
*
* Echo: Is generated by CMX and is used to check performance of hard and
* software CMX.
*
* The CMX has special functions for conferences with one, two and more
* members. It will allow different types of data flow. Receive and transmit
* data to/form upper layer may be swithed on/off individually without losing
* features of CMX, Tones and DTMF.
*
* Echo Cancellation: Sometimes we like to cancel echo from the interface.
* Note that a VoIP call may not have echo caused by the IP phone. The echo
* is generated by the telephone line connected to it. Because the delay
* is high, it becomes an echo. RESULT: Echo Cachelation is required if
* both echo AND delay is applied to an interface.
* Remember that software CMX always generates a more or less delay.
*
* If all used features can be realized in hardware, and if transmit and/or
* receive data ist disabled, the card may not send/receive any data at all.
* Not receiving is useful if only announcements are played. Not sending is
* useful if an answering machine records audio. Not sending and receiving is
* useful during most states of the call. If supported by hardware, tones
* will be played without cpu load. Small PBXs and NT-Mode applications will
* not need expensive hardware when processing calls.
*
*
* LOCKING:
*
* When data is received from upper or lower layer (card), the complete dsp
* module is locked by a global lock. This lock MUST lock irq, because it
* must lock timer events by DSP poll timer.
* When data is ready to be transmitted down, the data is queued and sent
* outside lock and timer event.
* PH_CONTROL must not change any settings, join or split conference members
* during process of data.
*
* HDLC:
*
* It works quite the same as transparent, except that HDLC data is forwarded
* to all other conference members if no hardware bridging is possible.
* Send data will be writte to sendq. Sendq will be sent if confirm is received.
* Conference cannot join, if one member is not hdlc.
*
*/
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/mISDNif.h>
#include <linux/mISDNdsp.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include "core.h"
#include "dsp.h"
mISDN: make global symbols static or include header files The warnings fixed by including an header file for the appropriate prototype are marked with "*", for all others the corresonponding symbol has been made static. This patch fixes all such issues in mISDN. Fix this sparse warnings: drivers/isdn/hardware/mISDN/hfcmulti.c:174:5: warning: symbol 'plxsd_master' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:426:1: warning: symbol 'write_fifo_regio' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:447:1: warning: symbol 'write_fifo_pcimem' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:469:1: warning: symbol 'read_fifo_regio' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:491:1: warning: symbol 'read_fifo_pcimem' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:710:1: warning: symbol 'vpm_init' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:793:1: warning: symbol 'vpm_check' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:816:1: warning: symbol 'vpm_echocan_on' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:848:1: warning: symbol 'vpm_echocan_off' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:224:1: warning: symbol 'l1oip_law_to_4bit' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:261:1: warning: symbol 'l1oip_4bit_to_law' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:281:1: warning: symbol 'l1oip_alaw_to_ulaw' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:294:1: warning: symbol 'l1oip_ulaw_to_alaw' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:311:1: warning: symbol 'l1oip_4bit_free' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:322:1: warning: symbol 'l1oip_4bit_alloc' was not declared. Should it be static? drivers/isdn/mISDN/core.c:29:1: warning: symbol 'device_lock' was not declared. Should it be static? drivers/isdn/mISDN/core.c:34:1: warning: symbol 'bp_lock' was not declared. Should it be static? drivers/isdn/mISDN/core.c:196:1: warning: symbol 'mISDNInit' was not declared. Should it be static? drivers/isdn/mISDN/core.c:227:6: warning: symbol 'mISDN_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/stack.c:40:1: warning: symbol 'mISDN_queue_message' was not declared. Should it be static? * drivers/isdn/mISDN/layer1.c:388:1: warning: symbol 'l1_init' was not declared. Should it be static? * drivers/isdn/mISDN/layer1.c:400:1: warning: symbol 'l1_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:469:1: warning: symbol 'iframe_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:487:1: warning: symbol 'super_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:496:1: warning: symbol 'unnum_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:509:1: warning: symbol 'UI_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:522:1: warning: symbol 'FRMR_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:1069:1: warning: symbol 'enquiry_cr' was not declared. Should it be static? * drivers/isdn/mISDN/layer2.c:2196:1: warning: symbol 'Isdnl2_Init' was not declared. Should it be static? * drivers/isdn/mISDN/layer2.c:2210:1: warning: symbol 'Isdnl2_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/tei.c:397:1: warning: symbol 'random_ri' was not declared. Should it be static? * drivers/isdn/mISDN/timerdev.c:277:1: warning: symbol 'mISDN_inittimer' was not declared. Should it be static? * drivers/isdn/mISDN/timerdev.c:288:6: warning: symbol 'mISDN_timer_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/dsp_core.c:164:12: warning: symbol 'mISDN_dsp_revision' was not declared. Should it be static? drivers/isdn/mISDN/dsp_cmx.c:1543:5: warning: symbol 'samplecount' was not declared. Should it be static? drivers/isdn/mISDN/dsp_cmx.c:1546:5: warning: symbol 'dsp_start_jiffies' was not declared. Should it be static? drivers/isdn/mISDN/dsp_cmx.c:1547:16: warning: symbol 'dsp_start_tv' was not declared. Should it be static? drivers/isdn/mISDN/dsp_tones.c:239:3: warning: symbol 'pattern' was not declared. Should it be static? drivers/isdn/mISDN/dsp_audio.c:33:4: warning: symbol 'dsp_audio_ulaw_to_alaw' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-13 05:15:17 +00:00
static const char *mISDN_dsp_revision = "2.0";
static int debug;
static int options;
static int poll;
static int dtmfthreshold = 100;
MODULE_AUTHOR("Andreas Eversberg");
module_param(debug, uint, S_IRUGO | S_IWUSR);
module_param(options, uint, S_IRUGO | S_IWUSR);
module_param(poll, uint, S_IRUGO | S_IWUSR);
module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR);
MODULE_LICENSE("GPL");
/*int spinnest = 0;*/
spinlock_t dsp_lock; /* global dsp lock */
struct list_head dsp_ilist;
struct list_head conf_ilist;
int dsp_debug;
int dsp_options;
int dsp_poll, dsp_tics;
/* check if rx may be turned off or must be turned on */
static void
dsp_rx_off_member(struct dsp *dsp)
{
struct mISDN_ctrl_req cq;
int rx_off = 1;
memset(&cq, 0, sizeof(cq));
if (!dsp->features_rx_off)
return;
/* not disabled */
if (!dsp->rx_disabled)
rx_off = 0;
/* software dtmf */
else if (dsp->dtmf.software)
rx_off = 0;
/* echo in software */
else if (dsp->echo.software)
rx_off = 0;
/* bridge in software */
else if (dsp->conf && dsp->conf->software)
rx_off = 0;
/* data is not required by user space and not required
* for echo dtmf detection, soft-echo, soft-bridging */
if (rx_off == dsp->rx_is_off)
return;
if (!dsp->ch.peer) {
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: no peer, no rx_off\n",
__func__);
return;
}
cq.op = MISDN_CTRL_RX_OFF;
cq.p1 = rx_off;
if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) {
printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
__func__);
return;
}
dsp->rx_is_off = rx_off;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: %s set rx_off = %d\n",
__func__, dsp->name, rx_off);
}
static void
dsp_rx_off(struct dsp *dsp)
{
struct dsp_conf_member *member;
if (dsp_options & DSP_OPT_NOHARDWARE)
return;
/* no conf */
if (!dsp->conf) {
dsp_rx_off_member(dsp);
return;
}
/* check all members in conf */
list_for_each_entry(member, &dsp->conf->mlist, list) {
dsp_rx_off_member(member->dsp);
}
}
/* enable "fill empty" feature */
static void
dsp_fill_empty(struct dsp *dsp)
{
struct mISDN_ctrl_req cq;
memset(&cq, 0, sizeof(cq));
if (!dsp->ch.peer) {
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: no peer, no fill_empty\n",
__func__);
return;
}
cq.op = MISDN_CTRL_FILL_EMPTY;
cq.p1 = 1;
cq.p2 = dsp_silence;
if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) {
printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
__func__);
return;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: %s set fill_empty = 1\n",
__func__, dsp->name);
}
static int
dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
{
struct sk_buff *nskb;
int ret = 0;
int cont;
u8 *data;
int len;
if (skb->len < sizeof(int))
printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__);
cont = *((int *)skb->data);
len = skb->len - sizeof(int);
data = skb->data + sizeof(int);
switch (cont) {
case DTMF_TONE_START: /* turn on DTMF */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: start dtmf\n", __func__);
if (len == sizeof(int)) {
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_NOTICE "changing DTMF Threshold "
"to %d\n", *((int *)data));
dsp->dtmf.treshold = (*(int *)data) * 10000;
}
dsp->dtmf.enable = 1;
/* init goertzel */
dsp_dtmf_goertzel_init(dsp);
/* check dtmf hardware */
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
break;
case DTMF_TONE_STOP: /* turn off DTMF */
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: stop dtmf\n", __func__);
dsp->dtmf.enable = 0;
dsp->dtmf.hardware = 0;
dsp->dtmf.software = 0;
break;
case DSP_CONF_JOIN: /* join / update conference */
if (len < sizeof(int)) {
ret = -EINVAL;
break;
}
if (*((u32 *)data) == 0)
goto conf_split;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: join conference %d\n",
__func__, *((u32 *)data));
ret = dsp_cmx_conf(dsp, *((u32 *)data));
/* dsp_cmx_hardware will also be called here */
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_CONF_SPLIT: /* remove from conference */
conf_split:
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: release conference\n", __func__);
ret = dsp_cmx_conf(dsp, 0);
/* dsp_cmx_hardware will also be called here */
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
dsp_rx_off(dsp);
break;
case DSP_TONE_PATT_ON: /* play tone */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (len < sizeof(int)) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: turn tone 0x%x on\n",
__func__, *((int *)skb->data));
ret = dsp_tone(dsp, *((int *)data));
if (!ret) {
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
}
if (!dsp->tone.tone)
goto tone_off;
break;
case DSP_TONE_PATT_OFF: /* stop tone */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: turn tone off\n", __func__);
dsp_tone(dsp, 0);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
/* reset tx buffers (user space data) */
tone_off:
dsp->rx_W = 0;
dsp->rx_R = 0;
break;
case DSP_VOL_CHANGE_TX: /* change volume */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (len < sizeof(int)) {
ret = -EINVAL;
break;
}
dsp->tx_volume = *((int *)data);
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: change tx vol to %d\n",
__func__, dsp->tx_volume);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
break;
case DSP_VOL_CHANGE_RX: /* change volume */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (len < sizeof(int)) {
ret = -EINVAL;
break;
}
dsp->rx_volume = *((int *)data);
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: change rx vol to %d\n",
__func__, dsp->tx_volume);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
break;
case DSP_ECHO_ON: /* enable echo */
dsp->echo.software = 1; /* soft echo */
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_ECHO_OFF: /* disable echo */
dsp->echo.software = 0;
dsp->echo.hardware = 0;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_RECEIVE_ON: /* enable receive to user space */
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: enable receive to user "
"space\n", __func__);
dsp->rx_disabled = 0;
dsp_rx_off(dsp);
break;
case DSP_RECEIVE_OFF: /* disable receive to user space */
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: disable receive to "
"user space\n", __func__);
dsp->rx_disabled = 1;
dsp_rx_off(dsp);
break;
case DSP_MIX_ON: /* enable mixing of tx data */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: enable mixing of "
"tx-data with conf mebers\n", __func__);
dsp->tx_mix = 1;
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_MIX_OFF: /* disable mixing of tx data */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: disable mixing of "
"tx-data with conf mebers\n", __func__);
dsp->tx_mix = 0;
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_TXDATA_ON: /* enable txdata */
dsp->tx_data = 1;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: enable tx-data\n", __func__);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_TXDATA_OFF: /* disable txdata */
dsp->tx_data = 0;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: disable tx-data\n", __func__);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
if (dsp_debug & DEBUG_DSP_CMX)
dsp_cmx_debug(dsp);
break;
case DSP_DELAY: /* use delay algorithm instead of dynamic
jitter algorithm */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (len < sizeof(int)) {
ret = -EINVAL;
break;
}
dsp->cmx_delay = (*((int *)data)) << 3;
/* milliseconds to samples */
if (dsp->cmx_delay >= (CMX_BUFF_HALF >> 1))
/* clip to half of maximum usable buffer
(half of half buffer) */
dsp->cmx_delay = (CMX_BUFF_HALF >> 1) - 1;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: use delay algorithm to "
"compensate jitter (%d samples)\n",
__func__, dsp->cmx_delay);
break;
case DSP_JITTER: /* use dynamic jitter algorithm instead of
delay algorithm */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
dsp->cmx_delay = 0;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: use jitter algorithm to "
"compensate jitter\n", __func__);
break;
case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
dsp->tx_dejitter = 1;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: use dejitter on TX "
"buffer\n", __func__);
break;
case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
dsp->tx_dejitter = 0;
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: use TX buffer without "
"dejittering\n", __func__);
break;
case DSP_PIPELINE_CFG:
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (len > 0 && ((char *)data)[len - 1]) {
printk(KERN_DEBUG "%s: pipeline config string "
"is not NULL terminated!\n", __func__);
ret = -EINVAL;
} else {
dsp->pipeline.inuse = 1;
dsp_cmx_hardware(dsp->conf, dsp);
ret = dsp_pipeline_build(&dsp->pipeline,
len > 0 ? data : NULL);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
}
break;
case DSP_BF_ENABLE_KEY: /* turn blowfish on */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (len < 4 || len > 56) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: turn blowfish on (key "
"not shown)\n", __func__);
ret = dsp_bf_init(dsp, (u8 *)data, len);
/* set new cont */
if (!ret)
cont = DSP_BF_ACCEPT;
else
cont = DSP_BF_REJECT;
/* send indication if it worked to set it */
nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY,
sizeof(int), &cont, GFP_ATOMIC);
if (nskb) {
if (dsp->up) {
if (dsp->up->send(dsp->up, nskb))
dev_kfree_skb(nskb);
} else
dev_kfree_skb(nskb);
}
if (!ret) {
dsp_cmx_hardware(dsp->conf, dsp);
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
}
break;
case DSP_BF_DISABLE: /* turn blowfish off */
if (dsp->hdlc) {
ret = -EINVAL;
break;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: turn blowfish off\n", __func__);
dsp_bf_cleanup(dsp);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
break;
default:
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: ctrl req %x unhandled\n",
__func__, cont);
ret = -EINVAL;
}
return ret;
}
static void
get_features(struct mISDNchannel *ch)
{
struct dsp *dsp = container_of(ch, struct dsp, ch);
struct mISDN_ctrl_req cq;
if (!ch->peer) {
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: no peer, no features\n",
__func__);
return;
}
memset(&cq, 0, sizeof(cq));
cq.op = MISDN_CTRL_GETOP;
if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) {
printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
__func__);
return;
}
if (cq.op & MISDN_CTRL_RX_OFF)
dsp->features_rx_off = 1;
if (cq.op & MISDN_CTRL_FILL_EMPTY)
dsp->features_fill_empty = 1;
if (dsp_options & DSP_OPT_NOHARDWARE)
return;
if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) {
cq.op = MISDN_CTRL_HW_FEATURES;
*((u_long *)&cq.p1) = (u_long)&dsp->features;
if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) {
printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
__func__);
}
} else
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: features not supported for %s\n",
__func__, dsp->name);
}
static int
dsp_function(struct mISDNchannel *ch, struct sk_buff *skb)
{
struct dsp *dsp = container_of(ch, struct dsp, ch);
struct mISDNhead *hh;
int ret = 0;
u8 *digits = NULL;
u_long flags;
hh = mISDN_HEAD_P(skb);
switch (hh->prim) {
/* FROM DOWN */
case (PH_DATA_CNF):
dsp->data_pending = 0;
/* trigger next hdlc frame, if any */
if (dsp->hdlc) {
spin_lock_irqsave(&dsp_lock, flags);
if (dsp->b_active)
schedule_work(&dsp->workq);
spin_unlock_irqrestore(&dsp_lock, flags);
}
break;
case (PH_DATA_IND):
case (DL_DATA_IND):
if (skb->len < 1) {
ret = -EINVAL;
break;
}
if (dsp->rx_is_off) {
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: rx-data during rx_off"
" for %s\n",
__func__, dsp->name);
}
if (dsp->hdlc) {
/* hdlc */
spin_lock_irqsave(&dsp_lock, flags);
dsp_cmx_hdlc(dsp, skb);
spin_unlock_irqrestore(&dsp_lock, flags);
if (dsp->rx_disabled) {
/* if receive is not allowed */
break;
}
hh->prim = DL_DATA_IND;
if (dsp->up)
return dsp->up->send(dsp->up, skb);
break;
}
spin_lock_irqsave(&dsp_lock, flags);
/* decrypt if enabled */
if (dsp->bf_enable)
dsp_bf_decrypt(dsp, skb->data, skb->len);
/* pipeline */
if (dsp->pipeline.inuse)
dsp_pipeline_process_rx(&dsp->pipeline, skb->data,
skb->len, hh->id);
/* change volume if requested */
if (dsp->rx_volume)
dsp_change_volume(skb, dsp->rx_volume);
/* check if dtmf soft decoding is turned on */
if (dsp->dtmf.software) {
digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
skb->len, (dsp_options & DSP_OPT_ULAW) ? 1 : 0);
}
/* we need to process receive data if software */
if (dsp->conf && dsp->conf->software) {
/* process data from card at cmx */
dsp_cmx_receive(dsp, skb);
}
spin_unlock_irqrestore(&dsp_lock, flags);
/* send dtmf result, if any */
if (digits) {
while (*digits) {
int k;
struct sk_buff *nskb;
if (dsp_debug & DEBUG_DSP_DTMF)
printk(KERN_DEBUG "%s: digit"
"(%c) to layer %s\n",
__func__, *digits, dsp->name);
k = *digits | DTMF_TONE_VAL;
nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
MISDN_ID_ANY, sizeof(int), &k,
GFP_ATOMIC);
if (nskb) {
if (dsp->up) {
if (dsp->up->send(
dsp->up, nskb))
dev_kfree_skb(nskb);
} else
dev_kfree_skb(nskb);
}
digits++;
}
}
if (dsp->rx_disabled) {
/* if receive is not allowed */
break;
}
hh->prim = DL_DATA_IND;
if (dsp->up)
return dsp->up->send(dsp->up, skb);
break;
case (PH_CONTROL_IND):
if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
printk(KERN_DEBUG "%s: PH_CONTROL INDICATION "
"received: %x (len %d) %s\n", __func__,
hh->id, skb->len, dsp->name);
switch (hh->id) {
case (DTMF_HFC_COEF): /* getting coefficients */
if (!dsp->dtmf.hardware) {
if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
printk(KERN_DEBUG "%s: ignoring DTMF "
"coefficients from HFC\n",
__func__);
break;
}
digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
skb->len, 2);
while (*digits) {
int k;
struct sk_buff *nskb;
if (dsp_debug & DEBUG_DSP_DTMF)
printk(KERN_DEBUG "%s: digit"
"(%c) to layer %s\n",
__func__, *digits, dsp->name);
k = *digits | DTMF_TONE_VAL;
nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
MISDN_ID_ANY, sizeof(int), &k,
GFP_ATOMIC);
if (nskb) {
if (dsp->up) {
if (dsp->up->send(
dsp->up, nskb))
dev_kfree_skb(nskb);
} else
dev_kfree_skb(nskb);
}
digits++;
}
break;
case (HFC_VOL_CHANGE_TX): /* change volume */
if (skb->len != sizeof(int)) {
ret = -EINVAL;
break;
}
spin_lock_irqsave(&dsp_lock, flags);
dsp->tx_volume = *((int *)skb->data);
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: change tx volume to "
"%d\n", __func__, dsp->tx_volume);
dsp_cmx_hardware(dsp->conf, dsp);
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
spin_unlock_irqrestore(&dsp_lock, flags);
break;
default:
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: ctrl ind %x unhandled "
"%s\n", __func__, hh->id, dsp->name);
ret = -EINVAL;
}
break;
case (PH_ACTIVATE_IND):
case (PH_ACTIVATE_CNF):
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: b_channel is now active %s\n",
__func__, dsp->name);
/* bchannel now active */
spin_lock_irqsave(&dsp_lock, flags);
dsp->b_active = 1;
dsp->data_pending = 0;
dsp->rx_init = 1;
/* rx_W and rx_R will be adjusted on first frame */
dsp->rx_W = 0;
dsp->rx_R = 0;
memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff));
dsp_cmx_hardware(dsp->conf, dsp);
dsp_dtmf_hardware(dsp);
dsp_rx_off(dsp);
spin_unlock_irqrestore(&dsp_lock, flags);
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: done with activation, sending "
"confirm to user space. %s\n", __func__,
dsp->name);
/* send activation to upper layer */
hh->prim = DL_ESTABLISH_CNF;
if (dsp->up)
return dsp->up->send(dsp->up, skb);
break;
case (PH_DEACTIVATE_IND):
case (PH_DEACTIVATE_CNF):
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: b_channel is now inactive %s\n",
__func__, dsp->name);
/* bchannel now inactive */
spin_lock_irqsave(&dsp_lock, flags);
dsp->b_active = 0;
dsp->data_pending = 0;
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
spin_unlock_irqrestore(&dsp_lock, flags);
hh->prim = DL_RELEASE_CNF;
if (dsp->up)
return dsp->up->send(dsp->up, skb);
break;
/* FROM UP */
case (DL_DATA_REQ):
case (PH_DATA_REQ):
if (skb->len < 1) {
ret = -EINVAL;
break;
}
if (dsp->hdlc) {
/* hdlc */
if (!dsp->b_active) {
ret = -EIO;
break;
}
hh->prim = PH_DATA_REQ;
spin_lock_irqsave(&dsp_lock, flags);
skb_queue_tail(&dsp->sendq, skb);
schedule_work(&dsp->workq);
spin_unlock_irqrestore(&dsp_lock, flags);
return 0;
}
/* send data to tx-buffer (if no tone is played) */
if (!dsp->tone.tone) {
spin_lock_irqsave(&dsp_lock, flags);
dsp_cmx_transmit(dsp, skb);
spin_unlock_irqrestore(&dsp_lock, flags);
}
break;
case (PH_CONTROL_REQ):
spin_lock_irqsave(&dsp_lock, flags);
ret = dsp_control_req(dsp, hh, skb);
spin_unlock_irqrestore(&dsp_lock, flags);
break;
case (DL_ESTABLISH_REQ):
case (PH_ACTIVATE_REQ):
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: activating b_channel %s\n",
__func__, dsp->name);
if (dsp->dtmf.hardware || dsp->dtmf.software)
dsp_dtmf_goertzel_init(dsp);
get_features(ch);
/* enable fill_empty feature */
if (dsp->features_fill_empty)
dsp_fill_empty(dsp);
/* send ph_activate */
hh->prim = PH_ACTIVATE_REQ;
if (ch->peer)
return ch->recv(ch->peer, skb);
break;
case (DL_RELEASE_REQ):
case (PH_DEACTIVATE_REQ):
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: releasing b_channel %s\n",
__func__, dsp->name);
spin_lock_irqsave(&dsp_lock, flags);
dsp->tone.tone = 0;
dsp->tone.hardware = 0;
dsp->tone.software = 0;
if (timer_pending(&dsp->tone.tl))
del_timer(&dsp->tone.tl);
if (dsp->conf)
dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be
called here */
skb_queue_purge(&dsp->sendq);
spin_unlock_irqrestore(&dsp_lock, flags);
hh->prim = PH_DEACTIVATE_REQ;
if (ch->peer)
return ch->recv(ch->peer, skb);
break;
default:
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: msg %x unhandled %s\n",
__func__, hh->prim, dsp->name);
ret = -EINVAL;
}
if (!ret)
dev_kfree_skb(skb);
return ret;
}
static int
dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
{
struct dsp *dsp = container_of(ch, struct dsp, ch);
u_long flags;
int err = 0;
if (debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
switch (cmd) {
case OPEN_CHANNEL:
break;
case CLOSE_CHANNEL:
if (dsp->ch.peer)
dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL);
/* wait until workqueue has finished,
* must lock here, or we may hit send-process currently
* queueing. */
spin_lock_irqsave(&dsp_lock, flags);
dsp->b_active = 0;
spin_unlock_irqrestore(&dsp_lock, flags);
/* MUST not be locked, because it waits until queue is done. */
cancel_work_sync(&dsp->workq);
spin_lock_irqsave(&dsp_lock, flags);
if (timer_pending(&dsp->tone.tl))
del_timer(&dsp->tone.tl);
skb_queue_purge(&dsp->sendq);
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: releasing member %s\n",
__func__, dsp->name);
dsp->b_active = 0;
dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called
here */
dsp_pipeline_destroy(&dsp->pipeline);
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: remove & destroy object %s\n",
__func__, dsp->name);
list_del(&dsp->list);
spin_unlock_irqrestore(&dsp_lock, flags);
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: dsp instance released\n",
__func__);
vfree(dsp);
module_put(THIS_MODULE);
break;
}
return err;
}
static void
dsp_send_bh(struct work_struct *work)
{
struct dsp *dsp = container_of(work, struct dsp, workq);
struct sk_buff *skb;
struct mISDNhead *hh;
if (dsp->hdlc && dsp->data_pending)
return; /* wait until data has been acknowledged */
/* send queued data */
while ((skb = skb_dequeue(&dsp->sendq))) {
/* in locked date, we must have still data in queue */
if (dsp->data_pending) {
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: fifo full %s, this is "
"no bug!\n", __func__, dsp->name);
/* flush transparent data, if not acked */
dev_kfree_skb(skb);
continue;
}
hh = mISDN_HEAD_P(skb);
if (hh->prim == DL_DATA_REQ) {
/* send packet up */
if (dsp->up) {
if (dsp->up->send(dsp->up, skb))
dev_kfree_skb(skb);
} else
dev_kfree_skb(skb);
} else {
/* send packet down */
if (dsp->ch.peer) {
dsp->data_pending = 1;
if (dsp->ch.recv(dsp->ch.peer, skb)) {
dev_kfree_skb(skb);
dsp->data_pending = 0;
}
} else
dev_kfree_skb(skb);
}
}
}
static int
dspcreate(struct channel_req *crq)
{
struct dsp *ndsp;
u_long flags;
if (crq->protocol != ISDN_P_B_L2DSP
&& crq->protocol != ISDN_P_B_L2DSPHDLC)
return -EPROTONOSUPPORT;
ndsp = vzalloc(sizeof(struct dsp));
if (!ndsp) {
printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
return -ENOMEM;
}
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
/* default enabled */
INIT_WORK(&ndsp->workq, (void *)dsp_send_bh);
skb_queue_head_init(&ndsp->sendq);
ndsp->ch.send = dsp_function;
ndsp->ch.ctrl = dsp_ctrl;
ndsp->up = crq->ch;
crq->ch = &ndsp->ch;
if (crq->protocol == ISDN_P_B_L2DSP) {
crq->protocol = ISDN_P_B_RAW;
ndsp->hdlc = 0;
} else {
crq->protocol = ISDN_P_B_HDLC;
ndsp->hdlc = 1;
}
if (!try_module_get(THIS_MODULE))
printk(KERN_WARNING "%s:cannot get module\n",
__func__);
sprintf(ndsp->name, "DSP_C%x(0x%p)",
ndsp->up->st->dev->id + 1, ndsp);
/* set frame size to start */
ndsp->features.hfc_id = -1; /* current PCM id */
ndsp->features.pcm_id = -1; /* current PCM id */
ndsp->pcm_slot_rx = -1; /* current CPM slot */
ndsp->pcm_slot_tx = -1;
ndsp->pcm_bank_rx = -1;
ndsp->pcm_bank_tx = -1;
ndsp->hfc_conf = -1; /* current conference number */
/* set tone timer */
ndsp->tone.tl.function = (void *)dsp_tone_timeout;
ndsp->tone.tl.data = (long) ndsp;
init_timer(&ndsp->tone.tl);
if (dtmfthreshold < 20 || dtmfthreshold > 500)
dtmfthreshold = 200;
ndsp->dtmf.treshold = dtmfthreshold * 10000;
/* init pipeline append to list */
spin_lock_irqsave(&dsp_lock, flags);
dsp_pipeline_init(&ndsp->pipeline);
list_add_tail(&ndsp->list, &dsp_ilist);
spin_unlock_irqrestore(&dsp_lock, flags);
return 0;
}
static struct Bprotocol DSP = {
.Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK))
| (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)),
.name = "dsp",
.create = dspcreate
};
static int __init dsp_init(void)
{
int err;
int tics;
printk(KERN_INFO "DSP module %s\n", mISDN_dsp_revision);
dsp_options = options;
dsp_debug = debug;
/* set packet size */
dsp_poll = poll;
if (dsp_poll) {
if (dsp_poll > MAX_POLL) {
printk(KERN_ERR "%s: Wrong poll value (%d), use %d "
"maximum.\n", __func__, poll, MAX_POLL);
err = -EINVAL;
return err;
}
if (dsp_poll < 8) {
printk(KERN_ERR "%s: Wrong poll value (%d), use 8 "
"minimum.\n", __func__, dsp_poll);
err = -EINVAL;
return err;
}
dsp_tics = poll * HZ / 8000;
if (dsp_tics * 8000 != poll * HZ) {
printk(KERN_INFO "mISDN_dsp: Cannot clock every %d "
"samples (0,125 ms). It is not a multiple of "
"%d HZ.\n", poll, HZ);
err = -EINVAL;
return err;
}
} else {
poll = 8;
while (poll <= MAX_POLL) {
tics = (poll * HZ) / 8000;
if (tics * 8000 == poll * HZ) {
dsp_tics = tics;
dsp_poll = poll;
if (poll >= 64)
break;
}
poll++;
}
}
if (dsp_poll == 0) {
printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel "
"clock that equals exactly the duration of 8-256 "
"samples. (Choose kernel clock speed like 100, 250, "
"300, 1000)\n");
err = -EINVAL;
return err;
}
printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals "
"%d jiffies.\n", dsp_poll, dsp_tics);
spin_lock_init(&dsp_lock);
INIT_LIST_HEAD(&dsp_ilist);
INIT_LIST_HEAD(&conf_ilist);
/* init conversion tables */
dsp_audio_generate_law_tables();
dsp_silence = (dsp_options & DSP_OPT_ULAW) ? 0xff : 0x2a;
dsp_audio_law_to_s32 = (dsp_options & DSP_OPT_ULAW) ?
dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32;
dsp_audio_generate_s2law_table();
dsp_audio_generate_seven();
dsp_audio_generate_mix_table();
if (dsp_options & DSP_OPT_ULAW)
dsp_audio_generate_ulaw_samples();
dsp_audio_generate_volume_changes();
err = dsp_pipeline_module_init();
if (err) {
printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, "
"error(%d)\n", err);
return err;
}
err = mISDN_register_Bprotocol(&DSP);
if (err) {
printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err);
return err;
}
/* set sample timer */
dsp_spl_tl.function = (void *)dsp_cmx_send;
dsp_spl_tl.data = 0;
init_timer(&dsp_spl_tl);
dsp_spl_tl.expires = jiffies + dsp_tics;
dsp_spl_jiffies = dsp_spl_tl.expires;
add_timer(&dsp_spl_tl);
return 0;
}
static void __exit dsp_cleanup(void)
{
mISDN_unregister_Bprotocol(&DSP);
del_timer_sync(&dsp_spl_tl);
if (!list_empty(&dsp_ilist)) {
printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not "
"empty.\n");
}
if (!list_empty(&conf_ilist)) {
printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not "
"all memory freed.\n");
}
dsp_pipeline_module_exit();
}
module_init(dsp_init);
module_exit(dsp_cleanup);