linux/arch/arm/mach-omap2/omap_hwmod.h

686 lines
24 KiB
C
Raw Normal View History

OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/*
* omap_hwmod macros, structures
*
* Copyright (C) 2009-2011 Nokia Corporation
* Copyright (C) 2011-2012 Texas Instruments, Inc.
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoît Cousson,
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
* Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These headers and macros are used to define OMAP on-chip module
* data and their integration with other OMAP modules and Linux.
* Copious documentation and references can also be found in the
* omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
* writing).
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*
* To do:
* - add interconnect error log structures
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
* - move Linux-specific data ("non-ROM data") out
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#include <linux/kernel.h>
#include <linux/init.h>
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
#include <linux/list.h>
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
#include <linux/ioport.h>
#include <linux/spinlock.h>
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct omap_device;
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
/*
* OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
* with the original PRCM protocol defined for OMAP2420
*/
#define SYSC_TYPE1_MIDLEMODE_SHIFT 12
#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8
#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
#define SYSC_TYPE1_SIDLEMODE_SHIFT 3
#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2
#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
#define SYSC_TYPE1_SOFTRESET_SHIFT 1
#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT)
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
#define SYSC_TYPE1_AUTOIDLE_SHIFT 0
#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
/*
* OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
* with the new PRCM protocol defined for new OMAP4 IPs.
*/
#define SYSC_TYPE2_SOFTRESET_SHIFT 0
#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
#define SYSC_TYPE2_SIDLEMODE_SHIFT 2
#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
#define SYSC_TYPE2_DMADISABLE_SHIFT 16
#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/*
* OCP SYSCONFIG bit shifts/masks TYPE3.
* This is applicable for some IPs present in AM33XX
*/
#define SYSC_TYPE3_SIDLEMODE_SHIFT 0
#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
#define SYSC_TYPE3_MIDLEMODE_SHIFT 2
#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT)
/* Master standby/slave idle mode flags */
#define HWMOD_IDLEMODE_FORCE (1 << 0)
#define HWMOD_IDLEMODE_NO (1 << 1)
#define HWMOD_IDLEMODE_SMART (1 << 2)
#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/* modulemode control type (SW or HW) */
#define MODULEMODE_HWCTRL 1
#define MODULEMODE_SWCTRL 2
/**
* struct omap_hwmod_mux_info - hwmod specific mux configuration
* @pads: array of omap_device_pad entries
* @nr_pads: number of omap_device_pad entries
*
* Note that this is currently built during init as needed.
*/
struct omap_hwmod_mux_info {
int nr_pads;
struct omap_device_pad *pads;
int nr_pads_dynamic;
struct omap_device_pad **pads_dynamic;
int *irqs;
bool enabled;
};
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/**
* struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
* @name: name of the IRQ channel (module local name)
* @irq: IRQ channel ID (should be non-negative except -1 = terminator)
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
* hwmod.
*/
struct omap_hwmod_irq_info {
const char *name;
s16 irq;
};
/**
* struct omap_hwmod_dma_info - DMA channels used by the hwmod
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @name: name of the DMA channel (module local name)
* @dma_req: DMA request ID (should be non-negative except -1 = terminator)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
* hwmod.
*/
struct omap_hwmod_dma_info {
const char *name;
s16 dma_req;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
};
OMAP: hwmod: Add hardreset management support Most processor IPs does have a hardreset signal controlled by the PRM. This is different of the softreset used for local IP reset from the SYSCONFIG register. The granularity can be much finer than orginal HWMOD, for ex, the IVA hwmod contains 3 reset lines, the IPU 3 as well, the DSP 2... Since this granularity is needed by the driver, we have to ensure than one hwmod exist for each hardreset line. - Store reset lines as hwmod resources that a driver can query by name like an irq or sdma line. - Add two functions for asserting / deasserting reset lines in hwmods processor that require manual reset control. - Add one functions to get the current reset state. - If an hwmod contains only one line, an automatic assertion / de-assertion is done. -> de-assert the hardreset line only during enable from disable transition -> assert the hardreset line only during shutdown Note: The hwmods with hardreset line and HWMOD_INIT_NO_RESET flag must be kept in INITIALIZED state. They can be properly enabled only if the hardreset line is de-asserted before. For information here is the list of IPs with HW reset control on an OMAP4430 device: RM_DSP_RSTCTRL 1,1,'RST2','RW','1','DSP - MMU, cache and slave interface reset control' 0,0,'RST1','RW','1','DSP - DSP reset control' RM_IVA_RSTCTRL 2,2,'RST3','RW','1','IVA logic and SL2 reset control' 1,1,'RST2','RW','1','IVA Sequencer2 reset control' 0,0,'RST1','RW','1','IVA sequencer1 reset control' RM_IPU_RSTCTRL 2,2,'RST3','RW','1','IPU MMU and CACHE interface reset control.' 1,1,'RST2','RW','1','IPU Cortex M3 CPU2 reset control.' 0,0,'RST1','RW','1','IPU Cortex M3 CPU1 reset control.' PRM_RSTCTRL 1,1,'RST_GLOBAL_COLD_SW','RW','0','Global COLD software reset control.' 0,0,'RST_GLOBAL_WARM_SW','RW','0','Global WARM software reset control.' RM_CPU0_CPU0_RSTCTRL RM_CPU1_CPU1_RSTCTRL 0,0,'RST','RW','0','Cortex A9 CPU0&1 warm local reset control' Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made the hardreset functions static; moved the register twiddling into prm*.c functions in previous patches; changed the function names to conform with hwmod practice] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-21 16:34:11 +00:00
/**
* struct omap_hwmod_rst_info - IPs reset lines use by hwmod
* @name: name of the reset line (module local name)
* @rst_shift: Offset of the reset bit
* @st_shift: Offset of the reset status bit (OMAP2/3 only)
OMAP: hwmod: Add hardreset management support Most processor IPs does have a hardreset signal controlled by the PRM. This is different of the softreset used for local IP reset from the SYSCONFIG register. The granularity can be much finer than orginal HWMOD, for ex, the IVA hwmod contains 3 reset lines, the IPU 3 as well, the DSP 2... Since this granularity is needed by the driver, we have to ensure than one hwmod exist for each hardreset line. - Store reset lines as hwmod resources that a driver can query by name like an irq or sdma line. - Add two functions for asserting / deasserting reset lines in hwmods processor that require manual reset control. - Add one functions to get the current reset state. - If an hwmod contains only one line, an automatic assertion / de-assertion is done. -> de-assert the hardreset line only during enable from disable transition -> assert the hardreset line only during shutdown Note: The hwmods with hardreset line and HWMOD_INIT_NO_RESET flag must be kept in INITIALIZED state. They can be properly enabled only if the hardreset line is de-asserted before. For information here is the list of IPs with HW reset control on an OMAP4430 device: RM_DSP_RSTCTRL 1,1,'RST2','RW','1','DSP - MMU, cache and slave interface reset control' 0,0,'RST1','RW','1','DSP - DSP reset control' RM_IVA_RSTCTRL 2,2,'RST3','RW','1','IVA logic and SL2 reset control' 1,1,'RST2','RW','1','IVA Sequencer2 reset control' 0,0,'RST1','RW','1','IVA sequencer1 reset control' RM_IPU_RSTCTRL 2,2,'RST3','RW','1','IPU MMU and CACHE interface reset control.' 1,1,'RST2','RW','1','IPU Cortex M3 CPU2 reset control.' 0,0,'RST1','RW','1','IPU Cortex M3 CPU1 reset control.' PRM_RSTCTRL 1,1,'RST_GLOBAL_COLD_SW','RW','0','Global COLD software reset control.' 0,0,'RST_GLOBAL_WARM_SW','RW','0','Global WARM software reset control.' RM_CPU0_CPU0_RSTCTRL RM_CPU1_CPU1_RSTCTRL 0,0,'RST','RW','0','Cortex A9 CPU0&1 warm local reset control' Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made the hardreset functions static; moved the register twiddling into prm*.c functions in previous patches; changed the function names to conform with hwmod practice] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-21 16:34:11 +00:00
*
* @name should be something short, e.g., "cpu0" or "rst". It is defined
* locally to the hwmod.
*/
struct omap_hwmod_rst_info {
const char *name;
u8 rst_shift;
u8 st_shift;
OMAP: hwmod: Add hardreset management support Most processor IPs does have a hardreset signal controlled by the PRM. This is different of the softreset used for local IP reset from the SYSCONFIG register. The granularity can be much finer than orginal HWMOD, for ex, the IVA hwmod contains 3 reset lines, the IPU 3 as well, the DSP 2... Since this granularity is needed by the driver, we have to ensure than one hwmod exist for each hardreset line. - Store reset lines as hwmod resources that a driver can query by name like an irq or sdma line. - Add two functions for asserting / deasserting reset lines in hwmods processor that require manual reset control. - Add one functions to get the current reset state. - If an hwmod contains only one line, an automatic assertion / de-assertion is done. -> de-assert the hardreset line only during enable from disable transition -> assert the hardreset line only during shutdown Note: The hwmods with hardreset line and HWMOD_INIT_NO_RESET flag must be kept in INITIALIZED state. They can be properly enabled only if the hardreset line is de-asserted before. For information here is the list of IPs with HW reset control on an OMAP4430 device: RM_DSP_RSTCTRL 1,1,'RST2','RW','1','DSP - MMU, cache and slave interface reset control' 0,0,'RST1','RW','1','DSP - DSP reset control' RM_IVA_RSTCTRL 2,2,'RST3','RW','1','IVA logic and SL2 reset control' 1,1,'RST2','RW','1','IVA Sequencer2 reset control' 0,0,'RST1','RW','1','IVA sequencer1 reset control' RM_IPU_RSTCTRL 2,2,'RST3','RW','1','IPU MMU and CACHE interface reset control.' 1,1,'RST2','RW','1','IPU Cortex M3 CPU2 reset control.' 0,0,'RST1','RW','1','IPU Cortex M3 CPU1 reset control.' PRM_RSTCTRL 1,1,'RST_GLOBAL_COLD_SW','RW','0','Global COLD software reset control.' 0,0,'RST_GLOBAL_WARM_SW','RW','0','Global WARM software reset control.' RM_CPU0_CPU0_RSTCTRL RM_CPU1_CPU1_RSTCTRL 0,0,'RST','RW','0','Cortex A9 CPU0&1 warm local reset control' Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made the hardreset functions static; moved the register twiddling into prm*.c functions in previous patches; changed the function names to conform with hwmod practice] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-21 16:34:11 +00:00
};
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/**
* struct omap_hwmod_opt_clk - optional clocks used by this hwmod
* @role: "sys", "32k", "tv", etc -- for use in clk_get()
* @clk: opt clock: OMAP clock name
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @_clk: pointer to the struct clk (filled in at runtime)
*
* The module's interface clock and main functional clock should not
* be added as optional clocks.
*/
struct omap_hwmod_opt_clk {
const char *role;
const char *clk;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct clk *_clk;
};
/* omap_hwmod_omap2_firewall.flags bits */
#define OMAP_FIREWALL_L3 (1 << 0)
#define OMAP_FIREWALL_L4 (1 << 1)
/**
* struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
* @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
* @l4_fw_region: L4 firewall region ID
* @l4_prot_group: L4 protection group ID
* @flags: (see omap_hwmod_omap2_firewall.flags macros above)
*/
struct omap_hwmod_omap2_firewall {
u8 l3_perm_bit;
u8 l4_fw_region;
u8 l4_prot_group;
u8 flags;
};
/*
* omap_hwmod_addr_space.flags bits
*
* ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
* ADDR_TYPE_RT: Address space contains module register target data.
*/
#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
#define ADDR_TYPE_RT (1 << 1)
/**
* struct omap_hwmod_addr_space - address space handled by the hwmod
* @name: name of the address space
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @pa_start: starting physical address
* @pa_end: ending physical address
* @flags: (see omap_hwmod_addr_space.flags macros above)
*
* Address space doesn't necessarily follow physical interconnect
* structure. GPMC is one example.
*/
struct omap_hwmod_addr_space {
const char *name;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
u32 pa_start;
u32 pa_end;
u8 flags;
};
/*
* omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
* interface to interact with the hwmod. Used to add sleep dependencies
* when the module is enabled or disabled.
*/
#define OCP_USER_MPU (1 << 0)
#define OCP_USER_SDMA (1 << 1)
#define OCP_USER_DSP (1 << 2)
#define OCP_USER_IVA (1 << 3)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/* omap_hwmod_ocp_if.flags bits */
#define OCPIF_SWSUP_IDLE (1 << 0)
#define OCPIF_CAN_BURST (1 << 1)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
/* omap_hwmod_ocp_if._int_flags possibilities */
#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/**
* struct omap_hwmod_ocp_if - OCP interface data
* @master: struct omap_hwmod that initiates OCP transactions on this link
* @slave: struct omap_hwmod that responds to OCP transactions on this link
* @addr: address space associated with this link
* @clk: interface clock: OMAP clock name
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @_clk: pointer to the interface struct clk (filled in at runtime)
* @fw: interface firewall data
* @width: OCP data width
* @user: initiators using this interface (see OCP_USER_* macros above)
* @flags: OCP interface flags (see OCPIF_* macros above)
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
* @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*
* It may also be useful to add a tag_cnt field for OCP2.x devices.
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
*/
struct omap_hwmod_ocp_if {
struct omap_hwmod *master;
struct omap_hwmod *slave;
struct omap_hwmod_addr_space *addr;
const char *clk;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct clk *_clk;
union {
struct omap_hwmod_omap2_firewall omap2;
} fw;
u8 width;
u8 user;
u8 flags;
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
u8 _int_flags;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
};
/* Macros for use in struct omap_hwmod_sysconfig */
/* Flags for use in omap_hwmod_sysconfig.idlemodes */
#define MASTER_STANDBY_SHIFT 4
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
#define SLAVE_IDLE_SHIFT 0
#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/* omap_hwmod_sysconfig.sysc_flags capability flags */
#define SYSC_HAS_AUTOIDLE (1 << 0)
#define SYSC_HAS_SOFTRESET (1 << 1)
#define SYSC_HAS_ENAWAKEUP (1 << 2)
#define SYSC_HAS_EMUFREE (1 << 3)
#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
#define SYSS_HAS_RESET_STATUS (1 << 7)
OMAP3: hwmod: Adding flag to prevent caching of sysconfig register. In the current implementation the sysconfig value is read into _sysc_cache once and an actual update to the sysconfig register happens only if the new value paased is differnt from the one in _sysc_cache. _sysc_cache is updated only if _HWMOD_SYSCONFIG_LOADED is not set. This can lead to the follwing issue if off mode is enabled in modules which employs "always-retore" mechanism of context save and restore. a. The module sets the sysconfig register through omap_device_enable. Here _sysc_cache is updated with the value written to the sysconfig register and left. b. The power domain containig the module enters off mode and the module context is lost. c. The module in use becomes active and calls omap_device_enable to enable itself. Here a read of sysconfig register does not happen as _HWMOD_SYSCONFIG_LOADED flag is set. The value to be written to the sysconfig register will be same as the one written in step a. Since _sysc_cache reflects the previous written value an update of the sysconfig register does not happen. This means in modules which employs "always-restore" mechanism after off , the sysconfig regsiters will never get updated. This patch introduces a flag SYSC_NO_CACHE which if set ensures that the sysconfig register is always read into _sysc_cache before an update is attempted. This flags need to be set only by modules which does not do a context save but re-initializes the registers every time the module is accessed. This includes modules like i2c, smartreflex etc. Signed-off-by: Thara Gopinath <thara@ti.com> [paul@pwsan.com: tweaked to apply on a different head, added flag comment] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-20 00:30:51 +00:00
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
#define SYSC_HAS_RESET_STATUS (1 << 9)
#define SYSC_HAS_DMADISABLE (1 << 10)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
#define CLOCKACT_TEST_MAIN 0x1
#define CLOCKACT_TEST_ICLK 0x2
#define CLOCKACT_TEST_NONE 0x3
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
/**
* struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
* @midle_shift: Offset of the midle bit
* @clkact_shift: Offset of the clockactivity bit
* @sidle_shift: Offset of the sidle bit
* @enwkup_shift: Offset of the enawakeup bit
* @srst_shift: Offset of the softreset bit
* @autoidle_shift: Offset of the autoidle bit
* @dmadisable_shift: Offset of the dmadisable bit
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
*/
struct omap_hwmod_sysc_fields {
u8 midle_shift;
u8 clkact_shift;
u8 sidle_shift;
u8 enwkup_shift;
u8 srst_shift;
u8 autoidle_shift;
u8 dmadisable_shift;
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
};
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/**
* struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @srst_udelay: Delay needed after doing a softreset in usecs
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
*
* @clockact describes to the module which clocks are likely to be
* disabled when the PRCM issues its idle request to the module. Some
* modules have separate clockdomains for the interface clock and main
* functional clock, and can check whether they should acknowledge the
* idle request based on the internal module functionality that has
* been associated with the clocks marked in @clockact. This field is
* only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
*
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
* @sysc_fields: structure containing the offset positions of various bits in
* SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
* omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
* whether the device ip is compliant with the original PRCM protocol
* defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
* If the device follows a different scheme for the sysconfig register ,
OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:58 +00:00
* then this field has to be populated with the correct offset structure.
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*/
struct omap_hwmod_class_sysconfig {
u32 rev_offs;
u32 sysc_offs;
u32 syss_offs;
u16 sysc_flags;
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
u8 idlemodes;
u8 clockact;
};
/**
* struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
* @module_offs: PRCM submodule offset from the start of the PRM/CM
* @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
* @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
* @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
* @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
* @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
*
* @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
* WKEN, GRPSEL registers. In an ideal world, no extra information
* would be needed for IDLEST information, but alas, there are some
* exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
* are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
*/
struct omap_hwmod_omap2_prcm {
s16 module_offs;
u8 prcm_reg_id;
u8 module_bit;
u8 idlest_reg_id;
u8 idlest_idle_bit;
u8 idlest_stdby_bit;
};
/*
* Possible values for struct omap_hwmod_omap4_prcm.flags
*
* HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
* module-level context loss register associated with them; this
* flag bit should be set in those cases
*/
#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_offs: offset of the PRCM clock control register
* @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM
* @context_offs: offset of the RM_*_CONTEXT register
* @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
* @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @submodule_wkdep_bit: bit shift of the WKDEP range
* @flags: PRCM register capabilities for this IP block
* @modulemode: allowable modulemodes
* @context_lost_counter: Count of module level context lost
*
* If @lostcontext_mask is not defined, context loss check code uses
* whole register without masking. @lostcontext_mask should only be
* defined in cases where @context_offs register is shared by two or
* more hwmods.
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*/
struct omap_hwmod_omap4_prcm {
u16 clkctrl_offs;
u16 rstctrl_offs;
u16 rstst_offs;
u16 context_offs;
u32 lostcontext_mask;
u8 submodule_wkdep_bit;
u8 modulemode;
u8 flags;
int context_lost_counter;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
};
/*
* omap_hwmod.flags definitions
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
* controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_IDLE
* HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
* when module is enabled, rather than the default, which is to
* enable autoidle
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
* HWMOD_NO_IDLEST: this module does not have idle status - this is the case
* only for few initiator modules on OMAP2 & 3.
* HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
* This is needed for devices like DSS that require optional clocks enabled
* in order to complete the reset. Optional clocks will be disabled
* again after the reset.
* HWMOD_16BIT_REG: Module has 16bit registers
* HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
* this IP block comes from an off-chip source and is not always
* enabled. This prevents the hwmod code from being able to
* enable and reset the IP block early. XXX Eventually it should
* be possible to query the clock framework for this information.
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_INIT_NO_RESET (1 << 2)
#define HWMOD_INIT_NO_IDLE (1 << 3)
#define HWMOD_NO_OCP_AUTOIDLE (1 << 4)
#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5)
#define HWMOD_NO_IDLEST (1 << 6)
#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/*
* omap_hwmod._int_flags definitions
* These are for internal use only and are managed by the omap_hwmod code.
*
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
* _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
* _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
* causes the first call to _enable() to only update the pinmux
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
#define _HWMOD_WAKEUP_ENABLED (1 << 1)
#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
#define _HWMOD_SKIP_ENABLE (1 << 3)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/*
* omap_hwmod._state definitions
*
* INITIALIZED: reset (optionally), initialized, enabled, disabled
* (optionally)
*
*
*/
#define _HWMOD_STATE_UNKNOWN 0
#define _HWMOD_STATE_REGISTERED 1
#define _HWMOD_STATE_CLKS_INITED 2
#define _HWMOD_STATE_INITIALIZED 3
#define _HWMOD_STATE_ENABLED 4
#define _HWMOD_STATE_IDLE 5
#define _HWMOD_STATE_DISABLED 6
/**
* struct omap_hwmod_class - the type of an IP block
* @name: name of the hwmod_class
* @sysc: device SYSCONFIG/SYSSTATUS register data
* @rev: revision of the IP class
* @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
* @reset: ptr to fn to be executed in place of the standard hwmod reset fn
*
* Represent the class of a OMAP hardware "modules" (e.g. timer,
* smartreflex, gpio, uart...)
*
* @pre_shutdown is a function that will be run immediately before
* hwmod clocks are disabled, etc. It is intended for use for hwmods
* like the MPU watchdog, which cannot be disabled with the standard
* omap_hwmod_shutdown(). The function should return 0 upon success,
* or some negative error upon failure. Returning an error will cause
* omap_hwmod_shutdown() to abort the device shutdown and return an
* error.
*
* If @reset is defined, then the function it points to will be
* executed in place of the standard hwmod _reset() code in
* mach-omap2/omap_hwmod.c. This is needed for IP blocks which have
* unusual reset sequences - usually processor IP blocks like the IVA.
*/
struct omap_hwmod_class {
const char *name;
struct omap_hwmod_class_sysconfig *sysc;
u32 rev;
int (*pre_shutdown)(struct omap_hwmod *oh);
int (*reset)(struct omap_hwmod *oh);
};
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
/**
* struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
* @ocp_if: OCP interface structure record pointer
* @node: list_head pointing to next struct omap_hwmod_link in a list
*/
struct omap_hwmod_link {
struct omap_hwmod_ocp_if *ocp_if;
struct list_head node;
};
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
* @class: struct omap_hwmod_class * to the class of this hwmod
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @od: struct omap_device currently associated with this hwmod (internal use)
* @mpu_irqs: ptr to an array of MPU IRQs
* @sdma_reqs: ptr to an array of System DMA request IDs
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @prcm: PRCM data pertaining to this hwmod
* @main_clk: main clock: OMAP clock name
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
* @voltdm: pointer to voltage domain (filled in at runtime)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
* @_mpu_rt_va: cached register target start address (internal use)
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
* @_mpu_port: cached MPU register target slave (internal use)
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @opt_clks_cnt: number of @opt_clks
* @master_cnt: number of @master entries
* @slaves_cnt: number of @slave entries
* @response_lat: device OCP response latency (in interface clock cycles)
* @_int_flags: internal-use hwmod flags
* @_state: internal-use hwmod state
* @_postsetup_state: internal-use state to leave the hwmod in after _setup()
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @flags: hwmod flags (documented below)
* @_lock: spinlock serializing operations on this hwmod
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
* @node: list node for hwmod list (internal use)
*
* @main_clk refers to this module's "main clock," which for our
* purposes is defined as "the functional clock needed for register
* accesses to complete." Modules may not have a main clock if the
* interface clock also serves as a main clock.
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
*
* @masters and @slaves are now deprecated.
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
*/
struct omap_hwmod {
const char *name;
struct omap_hwmod_class *class;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct omap_device *od;
struct omap_hwmod_mux_info *mux;
struct omap_hwmod_irq_info *mpu_irqs;
struct omap_hwmod_dma_info *sdma_reqs;
OMAP: hwmod: Add hardreset management support Most processor IPs does have a hardreset signal controlled by the PRM. This is different of the softreset used for local IP reset from the SYSCONFIG register. The granularity can be much finer than orginal HWMOD, for ex, the IVA hwmod contains 3 reset lines, the IPU 3 as well, the DSP 2... Since this granularity is needed by the driver, we have to ensure than one hwmod exist for each hardreset line. - Store reset lines as hwmod resources that a driver can query by name like an irq or sdma line. - Add two functions for asserting / deasserting reset lines in hwmods processor that require manual reset control. - Add one functions to get the current reset state. - If an hwmod contains only one line, an automatic assertion / de-assertion is done. -> de-assert the hardreset line only during enable from disable transition -> assert the hardreset line only during shutdown Note: The hwmods with hardreset line and HWMOD_INIT_NO_RESET flag must be kept in INITIALIZED state. They can be properly enabled only if the hardreset line is de-asserted before. For information here is the list of IPs with HW reset control on an OMAP4430 device: RM_DSP_RSTCTRL 1,1,'RST2','RW','1','DSP - MMU, cache and slave interface reset control' 0,0,'RST1','RW','1','DSP - DSP reset control' RM_IVA_RSTCTRL 2,2,'RST3','RW','1','IVA logic and SL2 reset control' 1,1,'RST2','RW','1','IVA Sequencer2 reset control' 0,0,'RST1','RW','1','IVA sequencer1 reset control' RM_IPU_RSTCTRL 2,2,'RST3','RW','1','IPU MMU and CACHE interface reset control.' 1,1,'RST2','RW','1','IPU Cortex M3 CPU2 reset control.' 0,0,'RST1','RW','1','IPU Cortex M3 CPU1 reset control.' PRM_RSTCTRL 1,1,'RST_GLOBAL_COLD_SW','RW','0','Global COLD software reset control.' 0,0,'RST_GLOBAL_WARM_SW','RW','0','Global WARM software reset control.' RM_CPU0_CPU0_RSTCTRL RM_CPU1_CPU1_RSTCTRL 0,0,'RST','RW','0','Cortex A9 CPU0&1 warm local reset control' Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made the hardreset functions static; moved the register twiddling into prm*.c functions in previous patches; changed the function names to conform with hwmod practice] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-21 16:34:11 +00:00
struct omap_hwmod_rst_info *rst_lines;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
union {
struct omap_hwmod_omap2_prcm omap2;
struct omap_hwmod_omap4_prcm omap4;
} prcm;
const char *main_clk;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
char *clkdm_name;
struct clockdomain *clkdm;
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
struct list_head master_ports; /* connect to *_IA */
struct list_head slave_ports; /* connect to *_TA */
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
void *dev_attr;
u32 _sysc_cache;
void __iomem *_mpu_rt_va;
spinlock_t _lock;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct list_head node;
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
struct omap_hwmod_ocp_if *_mpu_port;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
u16 flags;
u8 response_lat;
OMAP: hwmod: Add hardreset management support Most processor IPs does have a hardreset signal controlled by the PRM. This is different of the softreset used for local IP reset from the SYSCONFIG register. The granularity can be much finer than orginal HWMOD, for ex, the IVA hwmod contains 3 reset lines, the IPU 3 as well, the DSP 2... Since this granularity is needed by the driver, we have to ensure than one hwmod exist for each hardreset line. - Store reset lines as hwmod resources that a driver can query by name like an irq or sdma line. - Add two functions for asserting / deasserting reset lines in hwmods processor that require manual reset control. - Add one functions to get the current reset state. - If an hwmod contains only one line, an automatic assertion / de-assertion is done. -> de-assert the hardreset line only during enable from disable transition -> assert the hardreset line only during shutdown Note: The hwmods with hardreset line and HWMOD_INIT_NO_RESET flag must be kept in INITIALIZED state. They can be properly enabled only if the hardreset line is de-asserted before. For information here is the list of IPs with HW reset control on an OMAP4430 device: RM_DSP_RSTCTRL 1,1,'RST2','RW','1','DSP - MMU, cache and slave interface reset control' 0,0,'RST1','RW','1','DSP - DSP reset control' RM_IVA_RSTCTRL 2,2,'RST3','RW','1','IVA logic and SL2 reset control' 1,1,'RST2','RW','1','IVA Sequencer2 reset control' 0,0,'RST1','RW','1','IVA sequencer1 reset control' RM_IPU_RSTCTRL 2,2,'RST3','RW','1','IPU MMU and CACHE interface reset control.' 1,1,'RST2','RW','1','IPU Cortex M3 CPU2 reset control.' 0,0,'RST1','RW','1','IPU Cortex M3 CPU1 reset control.' PRM_RSTCTRL 1,1,'RST_GLOBAL_COLD_SW','RW','0','Global COLD software reset control.' 0,0,'RST_GLOBAL_WARM_SW','RW','0','Global WARM software reset control.' RM_CPU0_CPU0_RSTCTRL RM_CPU1_CPU1_RSTCTRL 0,0,'RST','RW','0','Cortex A9 CPU0&1 warm local reset control' Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made the hardreset functions static; moved the register twiddling into prm*.c functions in previous patches; changed the function names to conform with hwmod practice] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-09-21 16:34:11 +00:00
u8 rst_lines_cnt;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
u8 opt_clks_cnt;
u8 masters_cnt;
u8 slaves_cnt;
u8 hwmods_cnt;
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
};
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int __init omap_hwmod_setup_one(const char *name);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
int omap_hwmod_softreset(struct omap_hwmod *oh);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *res);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
int omap_hwmod_for_each_by_class(const char *classname,
int (*fn)(struct omap_hwmod *oh,
void *user),
void *user);
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
extern void __init omap_hwmod_init(void);
const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
*/
extern int omap2420_hwmod_init(void);
extern int omap2430_hwmod_init(void);
extern int omap3xxx_hwmod_init(void);
extern int omap44xx_hwmod_init(void);
extern int am33xx_hwmod_init(void);
ARM: OMAP2+: hwmod: add support for link registration Add support for direct IP block interconnect ("link") registration to the hwmod code via a new function, omap_hwmod_register_links(). This will replace direct registration of hwmods, and a subsequent patch will remove omap_hwmod_register(). This change will allow a subsequent patch to remove the hwmod data link arrays. This will reduce the size of the hwmod static data and also make it easier to generate the data files. It will also make it possible to share some of the struct omap_hwmod records across multiple SoCs, since the link array pointers will be removed from the struct omap_hwmod. The downside is that boot time will increase. Minimizing boot time was the reason why the link arrays were originally introduced. Removing them will require extra computation during boot to allocate memory and associate IP blocks with their interconnects. However, since the current kernel development focus is on reducing the number of lines in arch/arm/mach-omap2/, boot time impact is now seemingly considered a lower priority. This patch contains additional complexity to reduce the number of memory allocations required for this change. This reduces the boot time impact: total hwmod link registration time was ~ 2655 microseconds with a simple allocation strategy, but is now ~ 549 microseconds[1] with the approach taken by this patch. 1. Measured on a BeagleBoard 35xx @ 500MHz MPU/333 MHz CORE, average of 7 samples. Total uncertainty is +/- 61 microseconds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-04-19 10:04:30 +00:00
extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
OMAP2/3/4: create omap_hwmod layer OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-09-03 17:14:03 +00:00
#endif