linux/drivers/staging/Kconfig

108 lines
2.5 KiB
Plaintext
Raw Normal View History

menuconfig STAGING
bool "Staging drivers"
default n
---help---
This option allows you to select a number of drivers that are
not of the "normal" Linux kernel quality level. These drivers
are placed here in order to get a wider audience to make use of
them. Please note that these drivers are under heavy
development, may or may not work, and may contain userspace
interfaces that most likely will be changed in the near
future.
Using any of these drivers will taint your kernel which might
affect support options from both the community, and various
commercial support organizations.
If you wish to work on these drivers, to help improve them, or
to report problems you have with them, please see the
driver_name.README file in the drivers/staging/ directory to
see what needs to be worked on, and who to contact.
If in doubt, say N here.
if STAGING
source "drivers/staging/slicoss/Kconfig"
source "drivers/staging/wlan-ng/Kconfig"
source "drivers/staging/comedi/Kconfig"
source "drivers/staging/olpc_dcon/Kconfig"
source "drivers/staging/rtl8192u/Kconfig"
source "drivers/staging/rtl8192e/Kconfig"
source "drivers/staging/rtl8712/Kconfig"
source "drivers/staging/rtl8188eu/Kconfig"
source "drivers/staging/rtl8723au/Kconfig"
source "drivers/staging/rts5208/Kconfig"
source "drivers/staging/octeon/Kconfig"
staging: MIPS: add Octeon USB HCD support Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB mass storage. The driver has been extracted from GPL sources of EdgeRouter Lite firmware (based on Linux 2.6.32.13). Some minor fixes and cleanups have been done to make it work with 3.10-rc3. $ uname -a Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux $ modprobe octeon-usb [ 37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned. [ 37.983649] OcteonUSB: Detected 1 ports [ 37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller [ 38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1 [ 38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000 [ 38.019970] hub 1-0:1.0: USB hub found [ 38.023851] hub 1-0:1.0: 1 port detected [ 38.028101] OcteonUSB: Registered HCD for port 0 on irq 122 [ 38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB [ 38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected [ 38.597375] scsi0 : usb-storage 1-1:1.0 [ 39.604111] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 [ 39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB) [ 39.630696] sd 0:0:0:0: [sda] Write Protect is off [ 39.635945] sd 0:0:0:0: [sda] No Caching mode page present [ 39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.651341] sd 0:0:0:0: [sda] No Caching mode page present [ 39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.664296] sda: sda1 sda2 [ 39.675574] sd 0:0:0:0: [sda] No Caching mode page present [ 39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-01 18:42:58 +00:00
source "drivers/staging/octeon-usb/Kconfig"
source "drivers/staging/vt6655/Kconfig"
source "drivers/staging/vt6656/Kconfig"
source "drivers/staging/iio/Kconfig"
source "drivers/staging/sm750fb/Kconfig"
source "drivers/staging/xgifb/Kconfig"
source "drivers/staging/emxx_udc/Kconfig"
source "drivers/staging/speakup/Kconfig"
source "drivers/staging/nvec/Kconfig"
source "drivers/staging/media/Kconfig"
source "drivers/staging/android/Kconfig"
source "drivers/staging/board/Kconfig"
source "drivers/staging/gdm724x/Kconfig"
source "drivers/staging/fwserial/Kconfig"
source "drivers/staging/goldfish/Kconfig"
source "drivers/staging/netlogic/Kconfig"
source "drivers/staging/mt29f_spinand/Kconfig"
staging: add Lustre file system client support Lustre is the most deployed distributed file system in the HPC (High Performance Computing) world. The patch adds its client side support. The code is not very clean and needs to live in drivers/staging for some time for continuing cleanup work. See drivers/staging/lustre/TODO for details. The code is based on Lustre master commit faefbfc04 commit faefbfc0460bc00f2ee4c1c1c86aa1e39b9eea49 Author: Alex Zhuravlev <alexey.zhuravlev@intel.com> Date: Tue Apr 30 23:05:21 2013 +0400 LU-3244 utils: tunefs.lustre should preserve virgin label Plus a few under-review patches on Whamcloud gerrit: 3.8 kernel support: http://review.whamcloud.com/#change,5973 http://review.whamcloud.com/#change,5974 http://review.whamcloud.com/#change,5768 http://review.whamcloud.com/#change,5781 http://review.whamcloud.com/#change,5763 http://review.whamcloud.com/#change,5613 http://review.whamcloud.com/#change,5655 3.9 kernel support: http://review.whamcloud.com/#change,5898 http://review.whamcloud.com/#change,5899 Kconfig/Kbuild: http://review.whamcloud.com/#change,4646 http://review.whamcloud.com/#change,4644 libcfs cleanup: http://review.whamcloud.com/#change,2831 http://review.whamcloud.com/#change,4775 http://review.whamcloud.com/#change,4776 http://review.whamcloud.com/#change,4777 http://review.whamcloud.com/#change,4778 http://review.whamcloud.com/#change,4779 http://review.whamcloud.com/#change,4780 All starting/trailing whitespaces are removed, to match kernel coding style. Also ran scripts/cleanfile on all lustre source files. [maked the Kconfig depend on BROKEN as the recent procfs changes causes this to fail - gregkh] Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-02 08:46:55 +00:00
source "drivers/staging/lustre/Kconfig"
source "drivers/staging/dgnc/Kconfig"
source "drivers/staging/gs_fpgaboot/Kconfig"
source "drivers/staging/skein/Kconfig"
source "drivers/staging/unisys/Kconfig"
source "drivers/staging/clocking-wizard/Kconfig"
source "drivers/staging/fbtft/Kconfig"
source "drivers/staging/fsl-mc/Kconfig"
source "drivers/staging/wilc1000/Kconfig"
Staging: most: add MOST driver's core module This patch adds the core module of the MOST driver to the kernel's driver staging area. This module is part of the MOST driver and handles the configuration interface in sysfs, the buffer management and the data routing. MOST defines the protocol, hardware and software layers necessary to allow for the efficient and low-cost transport of control, real-time and packet data using a single medium (physical layer). Media currently in use are fiber optics, unshielded twisted pair cables (UTP) and coax cables. MOST also supports various speed grades up to 150 Mbps. For more information on MOST, visit the MOST Cooperation website: www.mostcooperation.com. Cars continue to evolve into sophisticated consumer electronics platforms, increasing the demand for reliable and simple solutions to support audio, video and data communications. MOST can be used to connect multiple consumer devices via optical or electrical physical layers directly to one another or in a network configuration. As a synchronous network, MOST provides excellent Quality of Service and seamless connectivity for audio/video streaming. Therefore, the driver perfectly fits to the mission of Automotive Grade Linux to create open source software solutions for automotive applications. The driver consists basically of three layers. The hardware layer, the core layer and the application layer. The core layer consists of the core module only. This module handles the communication flow through all three layers, the configuration of the driver, the configuration interface representation in sysfs, and the buffer management. For each of the other two layers a selection of modules is provided. These modules can arbitrarily be combined to meet the needs of the desired system architecture. A module of the hardware layer is referred to as an HDM (hardware dependent module). Each module of this layer handles exactly one of the peripheral interfaces of a network interface controller (e.g. USB, MediaLB, I2C). A module of the application layer is referred to as an AIM (application interfacing module). The modules of this layer give access to MOST via one the following ways: character devices, ALSA, Networking or V4L2. To physically access MOST, an Intelligent Network Interface Controller (INIC) is needed. For more information on available controllers visit: www.microchip.com Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-24 14:11:48 +00:00
source "drivers/staging/most/Kconfig"
source "drivers/staging/i4l/Kconfig"
source "drivers/staging/ks7010/Kconfig"
endif # STAGING