linux/drivers/regulator/wm8400-regulator.c

277 lines
7.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// Regulator support for WM8400
//
// Copyright 2008 Wolfson Microelectronics PLC.
//
// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/wm8400-private.h>
static const struct linear_range wm8400_ldo_ranges[] = {
REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000),
REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000),
};
static const struct regulator_ops wm8400_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.map_voltage = regulator_map_voltage_linear_range,
};
static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev)
{
struct regmap *rmap = rdev_get_regmap(dev);
int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2;
u16 data[2];
int ret;
ret = regmap_bulk_read(rmap, WM8400_DCDC1_CONTROL_1 + offset, data, 2);
if (ret != 0)
return 0;
/* Datasheet: hibernate */
if (data[0] & WM8400_DC1_SLEEP)
return REGULATOR_MODE_STANDBY;
/* Datasheet: standby */
if (!(data[0] & WM8400_DC1_ACTIVE))
return REGULATOR_MODE_IDLE;
/* Datasheet: active with or without force PWM */
if (data[1] & WM8400_DC1_FRC_PWM)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
}
static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode)
{
struct regmap *rmap = rdev_get_regmap(dev);
int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2;
int ret;
switch (mode) {
case REGULATOR_MODE_FAST:
/* Datasheet: active with force PWM */
ret = regmap_update_bits(rmap, WM8400_DCDC1_CONTROL_2 + offset,
WM8400_DC1_FRC_PWM, WM8400_DC1_FRC_PWM);
if (ret != 0)
return ret;
return regmap_update_bits(rmap, WM8400_DCDC1_CONTROL_1 + offset,
WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP,
WM8400_DC1_ACTIVE);
case REGULATOR_MODE_NORMAL:
/* Datasheet: active */
ret = regmap_update_bits(rmap, WM8400_DCDC1_CONTROL_2 + offset,
WM8400_DC1_FRC_PWM, 0);
if (ret != 0)
return ret;
return regmap_update_bits(rmap, WM8400_DCDC1_CONTROL_1 + offset,
WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP,
WM8400_DC1_ACTIVE);
case REGULATOR_MODE_IDLE:
/* Datasheet: standby */
return regmap_update_bits(rmap, WM8400_DCDC1_CONTROL_1 + offset,
WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, 0);
default:
return -EINVAL;
}
}
static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev,
int input_uV, int output_uV,
int load_uA)
{
return REGULATOR_MODE_NORMAL;
}
static const struct regulator_ops wm8400_dcdc_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_mode = wm8400_dcdc_get_mode,
.set_mode = wm8400_dcdc_set_mode,
.get_optimum_mode = wm8400_dcdc_get_optimum_mode,
};
static struct regulator_desc regulators[] = {
{
.name = "LDO1",
.id = WM8400_LDO1,
.ops = &wm8400_ldo_ops,
.enable_reg = WM8400_LDO1_CONTROL,
.enable_mask = WM8400_LDO1_ENA,
.n_voltages = WM8400_LDO1_VSEL_MASK + 1,
.linear_ranges = wm8400_ldo_ranges,
.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.vsel_reg = WM8400_LDO1_CONTROL,
.vsel_mask = WM8400_LDO1_VSEL_MASK,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "LDO2",
.id = WM8400_LDO2,
.ops = &wm8400_ldo_ops,
.enable_reg = WM8400_LDO2_CONTROL,
.enable_mask = WM8400_LDO2_ENA,
.n_voltages = WM8400_LDO2_VSEL_MASK + 1,
.linear_ranges = wm8400_ldo_ranges,
.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.type = REGULATOR_VOLTAGE,
.vsel_reg = WM8400_LDO2_CONTROL,
.vsel_mask = WM8400_LDO2_VSEL_MASK,
.owner = THIS_MODULE,
},
{
.name = "LDO3",
.id = WM8400_LDO3,
.ops = &wm8400_ldo_ops,
.enable_reg = WM8400_LDO3_CONTROL,
.enable_mask = WM8400_LDO3_ENA,
.n_voltages = WM8400_LDO3_VSEL_MASK + 1,
.linear_ranges = wm8400_ldo_ranges,
.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.vsel_reg = WM8400_LDO3_CONTROL,
.vsel_mask = WM8400_LDO3_VSEL_MASK,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "LDO4",
.id = WM8400_LDO4,
.ops = &wm8400_ldo_ops,
.enable_reg = WM8400_LDO4_CONTROL,
.enable_mask = WM8400_LDO4_ENA,
.n_voltages = WM8400_LDO4_VSEL_MASK + 1,
.linear_ranges = wm8400_ldo_ranges,
.n_linear_ranges = ARRAY_SIZE(wm8400_ldo_ranges),
.vsel_reg = WM8400_LDO4_CONTROL,
.vsel_mask = WM8400_LDO4_VSEL_MASK,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "DCDC1",
.id = WM8400_DCDC1,
.ops = &wm8400_dcdc_ops,
.enable_reg = WM8400_DCDC1_CONTROL_1,
.enable_mask = WM8400_DC1_ENA_MASK,
.n_voltages = WM8400_DC1_VSEL_MASK + 1,
.vsel_reg = WM8400_DCDC1_CONTROL_1,
.vsel_mask = WM8400_DC1_VSEL_MASK,
.min_uV = 850000,
.uV_step = 25000,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
{
.name = "DCDC2",
.id = WM8400_DCDC2,
.ops = &wm8400_dcdc_ops,
.enable_reg = WM8400_DCDC2_CONTROL_1,
.enable_mask = WM8400_DC2_ENA_MASK,
.n_voltages = WM8400_DC2_VSEL_MASK + 1,
.vsel_reg = WM8400_DCDC2_CONTROL_1,
.vsel_mask = WM8400_DC2_VSEL_MASK,
.min_uV = 850000,
.uV_step = 25000,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
};
static int wm8400_regulator_probe(struct platform_device *pdev)
{
Regulators: wm8400 - cleanup platform driver data handling On Wed, Feb 24, 2010 at 08:40:56PM +0000, Mark Brown wrote: > On Wed, Feb 24, 2010 at 11:21:26AM -0800, Dmitry Torokhov wrote: > > On Wed, Feb 24, 2010 at 07:14:03PM +0000, Mark Brown wrote: > > > > This doesn't help unless you also provide a way for users to obtain a > > > struct wm8400. > > > Why would they need it? Only code that creates instances of wm8400 needs > > to know the definition of the sturcture, the rest can simply pass the > > pointer around. > > > I guess there is disconnect between us and I do not see any users of > > wm8400_register_regulator() in linux-next... Is there another tree I > > could peek at? > > There are no users in mainline. This would be called by board specific > code from the init callback of the wm8400 - you'd need to pass that > callback the struct wm8400. > > In any case, this is clearly an unrelated change to whatever else you > were doing to the driver so should be split off into a separate patch, > but if this is being changed at all then it'd be much more sensible to > change it to use a more modern pattern which completely removes the > wm8400_register_regulator() function and just uses platform data. Fair enough, I removed the offending part, updated patch below. -- Dmitry regulator: wm8400 - cleanup platform driver data handling Driver data set by platform_set_drvdata() is for private use of the driver currently bound to teh device and not for use by parent, subsystem and anyone else. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-02-25 09:55:37 +00:00
struct wm8400 *wm8400 = container_of(pdev, struct wm8400, regulators[pdev->id]);
struct regulator_config config = { };
struct regulator_dev *rdev;
config.dev = &pdev->dev;
config.init_data = dev_get_platdata(&pdev->dev);
config.driver_data = wm8400;
config.regmap = wm8400->regmap;
rdev = devm_regulator_register(&pdev->dev, &regulators[pdev->id],
&config);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
Regulators: wm8400 - cleanup platform driver data handling On Wed, Feb 24, 2010 at 08:40:56PM +0000, Mark Brown wrote: > On Wed, Feb 24, 2010 at 11:21:26AM -0800, Dmitry Torokhov wrote: > > On Wed, Feb 24, 2010 at 07:14:03PM +0000, Mark Brown wrote: > > > > This doesn't help unless you also provide a way for users to obtain a > > > struct wm8400. > > > Why would they need it? Only code that creates instances of wm8400 needs > > to know the definition of the sturcture, the rest can simply pass the > > pointer around. > > > I guess there is disconnect between us and I do not see any users of > > wm8400_register_regulator() in linux-next... Is there another tree I > > could peek at? > > There are no users in mainline. This would be called by board specific > code from the init callback of the wm8400 - you'd need to pass that > callback the struct wm8400. > > In any case, this is clearly an unrelated change to whatever else you > were doing to the driver so should be split off into a separate patch, > but if this is being changed at all then it'd be much more sensible to > change it to use a more modern pattern which completely removes the > wm8400_register_regulator() function and just uses platform data. Fair enough, I removed the offending part, updated patch below. -- Dmitry regulator: wm8400 - cleanup platform driver data handling Driver data set by platform_set_drvdata() is for private use of the driver currently bound to teh device and not for use by parent, subsystem and anyone else. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-02-25 09:55:37 +00:00
platform_set_drvdata(pdev, rdev);
return 0;
}
static struct platform_driver wm8400_regulator_driver = {
.driver = {
.name = "wm8400-regulator",
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-16 19:54:38 +00:00
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe = wm8400_regulator_probe,
};
/**
* wm8400_register_regulator - enable software control of a WM8400 regulator
*
* This function enables software control of a WM8400 regulator via
* the regulator API. It is intended to be called from the
* platform_init() callback of the WM8400 MFD driver.
*
* @dev: The WM8400 device to operate on.
* @reg: The regulator to control.
* @initdata: Regulator initdata for the regulator.
*/
int wm8400_register_regulator(struct device *dev, int reg,
struct regulator_init_data *initdata)
{
struct wm8400 *wm8400 = dev_get_drvdata(dev);
if (wm8400->regulators[reg].name)
return -EBUSY;
initdata->driver_data = wm8400;
wm8400->regulators[reg].name = "wm8400-regulator";
wm8400->regulators[reg].id = reg;
wm8400->regulators[reg].dev.parent = dev;
wm8400->regulators[reg].dev.platform_data = initdata;
return platform_device_register(&wm8400->regulators[reg]);
}
EXPORT_SYMBOL_GPL(wm8400_register_regulator);
static int __init wm8400_regulator_init(void)
{
return platform_driver_register(&wm8400_regulator_driver);
}
subsys_initcall(wm8400_regulator_init);
static void __exit wm8400_regulator_exit(void)
{
platform_driver_unregister(&wm8400_regulator_driver);
}
module_exit(wm8400_regulator_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM8400 regulator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm8400-regulator");