linux/drivers/video/fbdev/pm3fb.c

1569 lines
42 KiB
C
Raw Normal View History

/*
* linux/drivers/video/pm3fb.c -- 3DLabs Permedia3 frame buffer device
*
* Copyright (C) 2001 Romain Dolbeau <romain@dolbeau.org>.
*
* Ported to 2.6 kernel on 1 May 2007 by Krzysztof Helt <krzysztof.h1@wp.pl>
* based on pm2fb.c
*
* Based on code written by:
* Sven Luther, <luther@dpt-info.u-strasbg.fr>
* Alan Hourihane, <alanh@fairlite.demon.co.uk>
* Russell King, <rmk@arm.linux.org.uk>
* Based on linux/drivers/video/skeletonfb.c:
* Copyright (C) 1997 Geert Uytterhoeven
* Based on linux/driver/video/pm2fb.c:
* Copyright (C) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <video/pm3fb.h>
#if !defined(CONFIG_PCI)
#error "Only generic PCI cards supported."
#endif
#undef PM3FB_MASTER_DEBUG
#ifdef PM3FB_MASTER_DEBUG
#define DPRINTK(a, b...) \
printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b)
#else
#define DPRINTK(a, b...)
#endif
#define PM3_PIXMAP_SIZE (2048 * 4)
/*
* Driver data
*/
static int hwcursor = 1;
static char *mode_option;
static bool noaccel;
static bool nomtrr;
/*
* This structure defines the hardware state of the graphics card. Normally
* you place this in a header file in linux/include/video. This file usually
* also includes register information. That allows other driver subsystems
* and userland applications the ability to use the same header file to
* avoid duplicate work and easy porting of software.
*/
struct pm3_par {
unsigned char __iomem *v_regs;/* virtual address of p_regs */
u32 video; /* video flags before blanking */
u32 base; /* screen base in 128 bits unit */
u32 palette[16];
video: fbdev: pm3fb: use arch_phys_wc_add() and ioremap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Jingoo Han <jg1.han@samsung.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-04-21 20:16:34 +00:00
int wc_cookie;
};
/*
* Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
* if we don't use modedb. If we do use modedb see pm3fb_init how to use it
* to get a fb_var_screeninfo. Otherwise define a default var as well.
*/
static struct fb_fix_screeninfo pm3fb_fix = {
.id = "Permedia3",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.xpanstep = 1,
.ypanstep = 1,
.ywrapstep = 0,
.accel = FB_ACCEL_3DLABS_PERMEDIA3,
};
/*
* Utility functions
*/
static inline u32 PM3_READ_REG(struct pm3_par *par, s32 off)
{
return fb_readl(par->v_regs + off);
}
static inline void PM3_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
{
fb_writel(v, par->v_regs + off);
}
static inline void PM3_WAIT(struct pm3_par *par, u32 n)
{
while (PM3_READ_REG(par, PM3InFIFOSpace) < n)
cpu_relax();
}
static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
{
PM3_WAIT(par, 3);
PM3_WRITE_REG(par, PM3RD_IndexHigh, (r >> 8) & 0xff);
PM3_WRITE_REG(par, PM3RD_IndexLow, r & 0xff);
wmb();
PM3_WRITE_REG(par, PM3RD_IndexedData, v);
wmb();
}
static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno,
unsigned char r, unsigned char g, unsigned char b)
{
PM3_WAIT(par, 4);
PM3_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
wmb();
PM3_WRITE_REG(par, PM3RD_PaletteData, r);
wmb();
PM3_WRITE_REG(par, PM3RD_PaletteData, g);
wmb();
PM3_WRITE_REG(par, PM3RD_PaletteData, b);
wmb();
}
static void pm3fb_clear_colormap(struct pm3_par *par,
unsigned char r, unsigned char g, unsigned char b)
{
int i;
for (i = 0; i < 256 ; i++)
pm3fb_set_color(par, i, r, g, b);
}
/* Calculating various clock parameters */
static void pm3fb_calculate_clock(unsigned long reqclock,
unsigned char *prescale,
unsigned char *feedback,
unsigned char *postscale)
{
int f, pre, post;
unsigned long freq;
long freqerr = 1000;
long currerr;
for (f = 1; f < 256; f++) {
for (pre = 1; pre < 256; pre++) {
for (post = 0; post < 5; post++) {
freq = ((2*PM3_REF_CLOCK * f) >> post) / pre;
currerr = (reqclock > freq)
? reqclock - freq
: freq - reqclock;
if (currerr < freqerr) {
freqerr = currerr;
*feedback = f;
*prescale = pre;
*postscale = post;
}
}
}
}
}
static inline int pm3fb_depth(const struct fb_var_screeninfo *var)
{
if (var->bits_per_pixel == 16)
return var->red.length + var->green.length
+ var->blue.length;
return var->bits_per_pixel;
}
static inline int pm3fb_shift_bpp(unsigned bpp, int v)
{
switch (bpp) {
case 8:
return (v >> 4);
case 16:
return (v >> 3);
case 32:
return (v >> 2);
}
DPRINTK("Unsupported depth %u\n", bpp);
return 0;
}
/* acceleration */
static int pm3fb_sync(struct fb_info *info)
{
struct pm3_par *par = info->par;
PM3_WAIT(par, 2);
PM3_WRITE_REG(par, PM3FilterMode, PM3FilterModeSync);
PM3_WRITE_REG(par, PM3Sync, 0);
mb();
do {
while ((PM3_READ_REG(par, PM3OutFIFOWords)) == 0)
cpu_relax();
} while ((PM3_READ_REG(par, PM3OutputFifo)) != PM3Sync_Tag);
return 0;
}
static void pm3fb_init_engine(struct fb_info *info)
{
struct pm3_par *par = info->par;
const u32 width = (info->var.xres_virtual + 7) & ~7;
PM3_WAIT(par, 50);
PM3_WRITE_REG(par, PM3FilterMode, PM3FilterModeSync);
PM3_WRITE_REG(par, PM3StatisticMode, 0x0);
PM3_WRITE_REG(par, PM3DeltaMode, 0x0);
PM3_WRITE_REG(par, PM3RasterizerMode, 0x0);
PM3_WRITE_REG(par, PM3ScissorMode, 0x0);
PM3_WRITE_REG(par, PM3LineStippleMode, 0x0);
PM3_WRITE_REG(par, PM3AreaStippleMode, 0x0);
PM3_WRITE_REG(par, PM3GIDMode, 0x0);
PM3_WRITE_REG(par, PM3DepthMode, 0x0);
PM3_WRITE_REG(par, PM3StencilMode, 0x0);
PM3_WRITE_REG(par, PM3StencilData, 0x0);
PM3_WRITE_REG(par, PM3ColorDDAMode, 0x0);
PM3_WRITE_REG(par, PM3TextureCoordMode, 0x0);
PM3_WRITE_REG(par, PM3TextureIndexMode0, 0x0);
PM3_WRITE_REG(par, PM3TextureIndexMode1, 0x0);
PM3_WRITE_REG(par, PM3TextureReadMode, 0x0);
PM3_WRITE_REG(par, PM3LUTMode, 0x0);
PM3_WRITE_REG(par, PM3TextureFilterMode, 0x0);
PM3_WRITE_REG(par, PM3TextureCompositeMode, 0x0);
PM3_WRITE_REG(par, PM3TextureApplicationMode, 0x0);
PM3_WRITE_REG(par, PM3TextureCompositeColorMode1, 0x0);
PM3_WRITE_REG(par, PM3TextureCompositeAlphaMode1, 0x0);
PM3_WRITE_REG(par, PM3TextureCompositeColorMode0, 0x0);
PM3_WRITE_REG(par, PM3TextureCompositeAlphaMode0, 0x0);
PM3_WRITE_REG(par, PM3FogMode, 0x0);
PM3_WRITE_REG(par, PM3ChromaTestMode, 0x0);
PM3_WRITE_REG(par, PM3AlphaTestMode, 0x0);
PM3_WRITE_REG(par, PM3AntialiasMode, 0x0);
PM3_WRITE_REG(par, PM3YUVMode, 0x0);
PM3_WRITE_REG(par, PM3AlphaBlendColorMode, 0x0);
PM3_WRITE_REG(par, PM3AlphaBlendAlphaMode, 0x0);
PM3_WRITE_REG(par, PM3DitherMode, 0x0);
PM3_WRITE_REG(par, PM3LogicalOpMode, 0x0);
PM3_WRITE_REG(par, PM3RouterMode, 0x0);
PM3_WRITE_REG(par, PM3Window, 0x0);
PM3_WRITE_REG(par, PM3Config2D, 0x0);
PM3_WRITE_REG(par, PM3SpanColorMask, 0xffffffff);
PM3_WRITE_REG(par, PM3XBias, 0x0);
PM3_WRITE_REG(par, PM3YBias, 0x0);
PM3_WRITE_REG(par, PM3DeltaControl, 0x0);
PM3_WRITE_REG(par, PM3BitMaskPattern, 0xffffffff);
PM3_WRITE_REG(par, PM3FBDestReadEnables,
PM3FBDestReadEnables_E(0xff) |
PM3FBDestReadEnables_R(0xff) |
PM3FBDestReadEnables_ReferenceAlpha(0xff));
PM3_WRITE_REG(par, PM3FBDestReadBufferAddr0, 0x0);
PM3_WRITE_REG(par, PM3FBDestReadBufferOffset0, 0x0);
PM3_WRITE_REG(par, PM3FBDestReadBufferWidth0,
PM3FBDestReadBufferWidth_Width(width));
PM3_WRITE_REG(par, PM3FBDestReadMode,
PM3FBDestReadMode_ReadEnable |
PM3FBDestReadMode_Enable0);
PM3_WRITE_REG(par, PM3FBSourceReadBufferAddr, 0x0);
PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset, 0x0);
PM3_WRITE_REG(par, PM3FBSourceReadBufferWidth,
PM3FBSourceReadBufferWidth_Width(width));
PM3_WRITE_REG(par, PM3FBSourceReadMode,
PM3FBSourceReadMode_Blocking |
PM3FBSourceReadMode_ReadEnable);
PM3_WAIT(par, 2);
{
/* invert bits in bitmask */
unsigned long rm = 1 | (3 << 7);
switch (info->var.bits_per_pixel) {
case 8:
PM3_WRITE_REG(par, PM3PixelSize,
PM3PixelSize_GLOBAL_8BIT);
#ifdef __BIG_ENDIAN
rm |= 3 << 15;
#endif
break;
case 16:
PM3_WRITE_REG(par, PM3PixelSize,
PM3PixelSize_GLOBAL_16BIT);
#ifdef __BIG_ENDIAN
rm |= 2 << 15;
#endif
break;
case 32:
PM3_WRITE_REG(par, PM3PixelSize,
PM3PixelSize_GLOBAL_32BIT);
break;
default:
DPRINTK(1, "Unsupported depth %d\n",
info->var.bits_per_pixel);
break;
}
PM3_WRITE_REG(par, PM3RasterizerMode, rm);
}
PM3_WAIT(par, 20);
PM3_WRITE_REG(par, PM3FBSoftwareWriteMask, 0xffffffff);
PM3_WRITE_REG(par, PM3FBHardwareWriteMask, 0xffffffff);
PM3_WRITE_REG(par, PM3FBWriteMode,
PM3FBWriteMode_WriteEnable |
PM3FBWriteMode_OpaqueSpan |
PM3FBWriteMode_Enable0);
PM3_WRITE_REG(par, PM3FBWriteBufferAddr0, 0x0);
PM3_WRITE_REG(par, PM3FBWriteBufferOffset0, 0x0);
PM3_WRITE_REG(par, PM3FBWriteBufferWidth0,
PM3FBWriteBufferWidth_Width(width));
PM3_WRITE_REG(par, PM3SizeOfFramebuffer, 0x0);
{
/* size in lines of FB */
unsigned long sofb = info->screen_size /
info->fix.line_length;
if (sofb > 4095)
PM3_WRITE_REG(par, PM3SizeOfFramebuffer, 4095);
else
PM3_WRITE_REG(par, PM3SizeOfFramebuffer, sofb);
switch (info->var.bits_per_pixel) {
case 8:
PM3_WRITE_REG(par, PM3DitherMode,
(1 << 10) | (2 << 3));
break;
case 16:
PM3_WRITE_REG(par, PM3DitherMode,
(1 << 10) | (1 << 3));
break;
case 32:
PM3_WRITE_REG(par, PM3DitherMode,
(1 << 10) | (0 << 3));
break;
default:
DPRINTK(1, "Unsupported depth %d\n",
info->current_par->depth);
break;
}
}
PM3_WRITE_REG(par, PM3dXDom, 0x0);
PM3_WRITE_REG(par, PM3dXSub, 0x0);
PM3_WRITE_REG(par, PM3dY, 1 << 16);
PM3_WRITE_REG(par, PM3StartXDom, 0x0);
PM3_WRITE_REG(par, PM3StartXSub, 0x0);
PM3_WRITE_REG(par, PM3StartY, 0x0);
PM3_WRITE_REG(par, PM3Count, 0x0);
/* Disable LocalBuffer. better safe than sorry */
PM3_WRITE_REG(par, PM3LBDestReadMode, 0x0);
PM3_WRITE_REG(par, PM3LBDestReadEnables, 0x0);
PM3_WRITE_REG(par, PM3LBSourceReadMode, 0x0);
PM3_WRITE_REG(par, PM3LBWriteMode, 0x0);
pm3fb_sync(info);
}
static void pm3fb_fillrect(struct fb_info *info,
const struct fb_fillrect *region)
{
struct pm3_par *par = info->par;
struct fb_fillrect modded;
int vxres, vyres;
int rop;
u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ?
((u32 *)info->pseudo_palette)[region->color] : region->color;
if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_fillrect(info, region);
return;
}
if (region->rop == ROP_COPY )
rop = PM3Config2D_ForegroundROP(0x3); /* GXcopy */
else
rop = PM3Config2D_ForegroundROP(0x6) | /* GXxor */
PM3Config2D_FBDestReadEnable;
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
memcpy(&modded, region, sizeof(struct fb_fillrect));
if (!modded.width || !modded.height ||
modded.dx >= vxres || modded.dy >= vyres)
return;
if (modded.dx + modded.width > vxres)
modded.width = vxres - modded.dx;
if (modded.dy + modded.height > vyres)
modded.height = vyres - modded.dy;
if (info->var.bits_per_pixel == 8)
color |= color << 8;
if (info->var.bits_per_pixel <= 16)
color |= color << 16;
PM3_WAIT(par, 4);
/* ROP Ox3 is GXcopy */
PM3_WRITE_REG(par, PM3Config2D,
PM3Config2D_UseConstantSource |
PM3Config2D_ForegroundROPEnable |
rop |
PM3Config2D_FBWriteEnable);
PM3_WRITE_REG(par, PM3ForegroundColor, color);
PM3_WRITE_REG(par, PM3RectanglePosition,
PM3RectanglePosition_XOffset(modded.dx) |
PM3RectanglePosition_YOffset(modded.dy));
PM3_WRITE_REG(par, PM3Render2D,
PM3Render2D_XPositive |
PM3Render2D_YPositive |
PM3Render2D_Operation_Normal |
PM3Render2D_SpanOperation |
PM3Render2D_Width(modded.width) |
PM3Render2D_Height(modded.height));
}
static void pm3fb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
struct pm3_par *par = info->par;
struct fb_copyarea modded;
u32 vxres, vyres;
int x_align, o_x, o_y;
if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_copyarea(info, area);
return;
}
memcpy(&modded, area, sizeof(struct fb_copyarea));
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
if (!modded.width || !modded.height ||
modded.sx >= vxres || modded.sy >= vyres ||
modded.dx >= vxres || modded.dy >= vyres)
return;
if (modded.sx + modded.width > vxres)
modded.width = vxres - modded.sx;
if (modded.dx + modded.width > vxres)
modded.width = vxres - modded.dx;
if (modded.sy + modded.height > vyres)
modded.height = vyres - modded.sy;
if (modded.dy + modded.height > vyres)
modded.height = vyres - modded.dy;
o_x = modded.sx - modded.dx; /*(sx > dx ) ? (sx - dx) : (dx - sx); */
o_y = modded.sy - modded.dy; /*(sy > dy ) ? (sy - dy) : (dy - sy); */
x_align = (modded.sx & 0x1f);
PM3_WAIT(par, 6);
PM3_WRITE_REG(par, PM3Config2D,
PM3Config2D_UserScissorEnable |
PM3Config2D_ForegroundROPEnable |
PM3Config2D_Blocking |
PM3Config2D_ForegroundROP(0x3) | /* Ox3 is GXcopy */
PM3Config2D_FBWriteEnable);
PM3_WRITE_REG(par, PM3ScissorMinXY,
((modded.dy & 0x0fff) << 16) | (modded.dx & 0x0fff));
PM3_WRITE_REG(par, PM3ScissorMaxXY,
(((modded.dy + modded.height) & 0x0fff) << 16) |
((modded.dx + modded.width) & 0x0fff));
PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset,
PM3FBSourceReadBufferOffset_XOffset(o_x) |
PM3FBSourceReadBufferOffset_YOffset(o_y));
PM3_WRITE_REG(par, PM3RectanglePosition,
PM3RectanglePosition_XOffset(modded.dx - x_align) |
PM3RectanglePosition_YOffset(modded.dy));
PM3_WRITE_REG(par, PM3Render2D,
((modded.sx > modded.dx) ? PM3Render2D_XPositive : 0) |
((modded.sy > modded.dy) ? PM3Render2D_YPositive : 0) |
PM3Render2D_Operation_Normal |
PM3Render2D_SpanOperation |
PM3Render2D_FBSourceReadEnable |
PM3Render2D_Width(modded.width + x_align) |
PM3Render2D_Height(modded.height));
}
static void pm3fb_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct pm3_par *par = info->par;
u32 height = image->height;
u32 fgx, bgx;
const u32 *src = (const u32 *)image->data;
if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_imageblit(info, image);
return;
}
switch (info->fix.visual) {
case FB_VISUAL_PSEUDOCOLOR:
fgx = image->fg_color;
bgx = image->bg_color;
break;
case FB_VISUAL_TRUECOLOR:
default:
fgx = par->palette[image->fg_color];
bgx = par->palette[image->bg_color];
break;
}
if (image->depth != 1) {
cfb_imageblit(info, image);
return;
}
if (info->var.bits_per_pixel == 8) {
fgx |= fgx << 8;
bgx |= bgx << 8;
}
if (info->var.bits_per_pixel <= 16) {
fgx |= fgx << 16;
bgx |= bgx << 16;
}
PM3_WAIT(par, 7);
PM3_WRITE_REG(par, PM3ForegroundColor, fgx);
PM3_WRITE_REG(par, PM3BackgroundColor, bgx);
/* ROP Ox3 is GXcopy */
PM3_WRITE_REG(par, PM3Config2D,
PM3Config2D_UserScissorEnable |
PM3Config2D_UseConstantSource |
PM3Config2D_ForegroundROPEnable |
PM3Config2D_ForegroundROP(0x3) |
PM3Config2D_OpaqueSpan |
PM3Config2D_FBWriteEnable);
PM3_WRITE_REG(par, PM3ScissorMinXY,
((image->dy & 0x0fff) << 16) | (image->dx & 0x0fff));
PM3_WRITE_REG(par, PM3ScissorMaxXY,
(((image->dy + image->height) & 0x0fff) << 16) |
((image->dx + image->width) & 0x0fff));
PM3_WRITE_REG(par, PM3RectanglePosition,
PM3RectanglePosition_XOffset(image->dx) |
PM3RectanglePosition_YOffset(image->dy));
PM3_WRITE_REG(par, PM3Render2D,
PM3Render2D_XPositive |
PM3Render2D_YPositive |
PM3Render2D_Operation_SyncOnBitMask |
PM3Render2D_SpanOperation |
PM3Render2D_Width(image->width) |
PM3Render2D_Height(image->height));
while (height--) {
int width = ((image->width + 7) >> 3)
+ info->pixmap.scan_align - 1;
width >>= 2;
while (width >= PM3_FIFO_SIZE) {
int i = PM3_FIFO_SIZE - 1;
PM3_WAIT(par, PM3_FIFO_SIZE);
while (i--) {
PM3_WRITE_REG(par, PM3BitMaskPattern, *src);
src++;
}
width -= PM3_FIFO_SIZE - 1;
}
PM3_WAIT(par, width + 1);
while (width--) {
PM3_WRITE_REG(par, PM3BitMaskPattern, *src);
src++;
}
}
}
/* end of acceleration functions */
/*
* Hardware Cursor support.
*/
static const u8 cursor_bits_lookup[16] = {
0x00, 0x40, 0x10, 0x50, 0x04, 0x44, 0x14, 0x54,
0x01, 0x41, 0x11, 0x51, 0x05, 0x45, 0x15, 0x55
};
static int pm3fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
struct pm3_par *par = info->par;
u8 mode;
if (!hwcursor)
return -EINVAL; /* just to force soft_cursor() call */
/* Too large of a cursor or wrong bpp :-( */
if (cursor->image.width > 64 ||
cursor->image.height > 64 ||
cursor->image.depth > 1)
return -EINVAL;
mode = PM3RD_CursorMode_TYPE_X;
if (cursor->enable)
mode |= PM3RD_CursorMode_CURSOR_ENABLE;
PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, mode);
/*
* If the cursor is not be changed this means either we want the
* current cursor state (if enable is set) or we want to query what
* we can do with the cursor (if enable is not set)
*/
if (!cursor->set)
return 0;
if (cursor->set & FB_CUR_SETPOS) {
int x = cursor->image.dx - info->var.xoffset;
int y = cursor->image.dy - info->var.yoffset;
PM3_WRITE_DAC_REG(par, PM3RD_CursorXLow, x & 0xff);
PM3_WRITE_DAC_REG(par, PM3RD_CursorXHigh, (x >> 8) & 0xf);
PM3_WRITE_DAC_REG(par, PM3RD_CursorYLow, y & 0xff);
PM3_WRITE_DAC_REG(par, PM3RD_CursorYHigh, (y >> 8) & 0xf);
}
if (cursor->set & FB_CUR_SETHOT) {
PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotX,
cursor->hot.x & 0x3f);
PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotY,
cursor->hot.y & 0x3f);
}
if (cursor->set & FB_CUR_SETCMAP) {
u32 fg_idx = cursor->image.fg_color;
u32 bg_idx = cursor->image.bg_color;
struct fb_cmap cmap = info->cmap;
/* the X11 driver says one should use these color registers */
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(39),
cmap.red[fg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(40),
cmap.green[fg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(41),
cmap.blue[fg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(42),
cmap.red[bg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(43),
cmap.green[bg_idx] >> 8 );
PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(44),
cmap.blue[bg_idx] >> 8 );
}
if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
u8 *bitmap = (u8 *)cursor->image.data;
u8 *mask = (u8 *)cursor->mask;
int i;
int pos = PM3RD_CursorPattern(0);
for (i = 0; i < cursor->image.height; i++) {
int j = (cursor->image.width + 7) >> 3;
int k = 8 - j;
for (; j > 0; j--) {
u8 data = *bitmap ^ *mask;
if (cursor->rop == ROP_COPY)
data = *mask & *bitmap;
/* Upper 4 bits of bitmap data */
PM3_WRITE_DAC_REG(par, pos++,
cursor_bits_lookup[data >> 4] |
(cursor_bits_lookup[*mask >> 4] << 1));
/* Lower 4 bits of bitmap */
PM3_WRITE_DAC_REG(par, pos++,
cursor_bits_lookup[data & 0xf] |
(cursor_bits_lookup[*mask & 0xf] << 1));
bitmap++;
mask++;
}
for (; k > 0; k--) {
PM3_WRITE_DAC_REG(par, pos++, 0);
PM3_WRITE_DAC_REG(par, pos++, 0);
}
}
while (pos < PM3RD_CursorPattern(1024))
PM3_WRITE_DAC_REG(par, pos++, 0);
}
return 0;
}
/* write the mode to registers */
static void pm3fb_write_mode(struct fb_info *info)
{
struct pm3_par *par = info->par;
char tempsync = 0x00;
char tempmisc = 0x00;
const u32 hsstart = info->var.right_margin;
const u32 hsend = hsstart + info->var.hsync_len;
const u32 hbend = hsend + info->var.left_margin;
const u32 xres = (info->var.xres + 31) & ~31;
const u32 htotal = xres + hbend;
const u32 vsstart = info->var.lower_margin;
const u32 vsend = vsstart + info->var.vsync_len;
const u32 vbend = vsend + info->var.upper_margin;
const u32 vtotal = info->var.yres + vbend;
const u32 width = (info->var.xres_virtual + 7) & ~7;
const unsigned bpp = info->var.bits_per_pixel;
PM3_WAIT(par, 20);
PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
PM3_WRITE_REG(par, PM3Aperture0, 0x00000000);
PM3_WRITE_REG(par, PM3Aperture1, 0x00000000);
PM3_WRITE_REG(par, PM3FIFODis, 0x00000007);
PM3_WRITE_REG(par, PM3HTotal,
pm3fb_shift_bpp(bpp, htotal - 1));
PM3_WRITE_REG(par, PM3HsEnd,
pm3fb_shift_bpp(bpp, hsend));
PM3_WRITE_REG(par, PM3HsStart,
pm3fb_shift_bpp(bpp, hsstart));
PM3_WRITE_REG(par, PM3HbEnd,
pm3fb_shift_bpp(bpp, hbend));
PM3_WRITE_REG(par, PM3HgEnd,
pm3fb_shift_bpp(bpp, hbend));
PM3_WRITE_REG(par, PM3ScreenStride,
pm3fb_shift_bpp(bpp, width));
PM3_WRITE_REG(par, PM3VTotal, vtotal - 1);
PM3_WRITE_REG(par, PM3VsEnd, vsend - 1);
PM3_WRITE_REG(par, PM3VsStart, vsstart - 1);
PM3_WRITE_REG(par, PM3VbEnd, vbend);
switch (bpp) {
case 8:
PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_8BIT);
PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_8BIT);
break;
case 16:
#ifndef __BIG_ENDIAN
PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_16BIT);
PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_16BIT);
#else
PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_16BIT |
PM3ByApertureMode_BYTESWAP_BADC);
PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_16BIT |
PM3ByApertureMode_BYTESWAP_BADC);
#endif /* ! __BIG_ENDIAN */
break;
case 32:
#ifndef __BIG_ENDIAN
PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_32BIT);
PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_32BIT);
#else
PM3_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_32BIT |
PM3ByApertureMode_BYTESWAP_DCBA);
PM3_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_32BIT |
PM3ByApertureMode_BYTESWAP_DCBA);
#endif /* ! __BIG_ENDIAN */
break;
default:
DPRINTK("Unsupported depth %d\n", bpp);
break;
}
/*
* Oxygen VX1 - it appears that setting PM3VideoControl and
* then PM3RD_SyncControl to the same SYNC settings undoes
* any net change - they seem to xor together. Only set the
* sync options in PM3RD_SyncControl. --rmk
*/
{
unsigned int video = par->video;
video &= ~(PM3VideoControl_HSYNC_MASK |
PM3VideoControl_VSYNC_MASK);
video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
PM3VideoControl_VSYNC_ACTIVE_HIGH;
PM3_WRITE_REG(par, PM3VideoControl, video);
}
PM3_WRITE_REG(par, PM3VClkCtl,
(PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC));
PM3_WRITE_REG(par, PM3ScreenBase, par->base);
PM3_WRITE_REG(par, PM3ChipConfig,
(PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD));
wmb();
{
unsigned char uninitialized_var(m); /* ClkPreScale */
unsigned char uninitialized_var(n); /* ClkFeedBackScale */
unsigned char uninitialized_var(p); /* ClkPostScale */
unsigned long pixclock = PICOS2KHZ(info->var.pixclock);
(void)pm3fb_calculate_clock(pixclock, &m, &n, &p);
DPRINTK("Pixclock: %ld, Pre: %d, Feedback: %d, Post: %d\n",
pixclock, (int) m, (int) n, (int) p);
PM3_WRITE_DAC_REG(par, PM3RD_DClk0PreScale, m);
PM3_WRITE_DAC_REG(par, PM3RD_DClk0FeedbackScale, n);
PM3_WRITE_DAC_REG(par, PM3RD_DClk0PostScale, p);
}
/*
PM3_WRITE_DAC_REG(par, PM3RD_IndexControl, 0x00);
*/
/*
PM3_SLOW_WRITE_REG(par, PM3RD_IndexControl, 0x00);
*/
if ((par->video & PM3VideoControl_HSYNC_MASK) ==
PM3VideoControl_HSYNC_ACTIVE_HIGH)
tempsync |= PM3RD_SyncControl_HSYNC_ACTIVE_HIGH;
if ((par->video & PM3VideoControl_VSYNC_MASK) ==
PM3VideoControl_VSYNC_ACTIVE_HIGH)
tempsync |= PM3RD_SyncControl_VSYNC_ACTIVE_HIGH;
PM3_WRITE_DAC_REG(par, PM3RD_SyncControl, tempsync);
DPRINTK("PM3RD_SyncControl: %d\n", tempsync);
PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00);
switch (pm3fb_depth(&info->var)) {
case 8:
PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_8_BIT_PIXELS);
PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_CI8_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
tempmisc |= PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
case 12:
PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_16_BIT_PIXELS);
PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_4444_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
case 15:
PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_16_BIT_PIXELS);
PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_5551_FRONT_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
case 16:
PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_16_BIT_PIXELS);
PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_565_FRONT_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
case 32:
PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_32_BIT_PIXELS);
PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_8888_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
}
PM3_WRITE_DAC_REG(par, PM3RD_MiscControl, tempmisc);
}
/*
* hardware independent functions
*/
static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
u32 lpitch;
unsigned bpp = var->red.length + var->green.length
+ var->blue.length + var->transp.length;
if (bpp != var->bits_per_pixel) {
/* set predefined mode for bits_per_pixel settings */
switch (var->bits_per_pixel) {
case 8:
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->red.offset = 0;
var->green.offset = 0;
var->blue.offset = 0;
var->transp.offset = 0;
var->transp.length = 0;
break;
case 16:
var->red.length = 5;
var->blue.length = 5;
var->green.length = 6;
var->transp.length = 0;
break;
case 32:
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 8;
break;
default:
DPRINTK("depth not supported: %u\n",
var->bits_per_pixel);
return -EINVAL;
}
}
/* it is assumed BGRA order */
if (var->bits_per_pixel > 8 ) {
var->blue.offset = 0;
var->green.offset = var->blue.length;
var->red.offset = var->green.offset + var->green.length;
var->transp.offset = var->red.offset + var->red.length;
}
var->height = -1;
var->width = -1;
if (var->xres != var->xres_virtual) {
DPRINTK("virtual x resolution != "
"physical x resolution not supported\n");
return -EINVAL;
}
if (var->yres > var->yres_virtual) {
DPRINTK("virtual y resolution < "
"physical y resolution not possible\n");
return -EINVAL;
}
if (var->xoffset) {
DPRINTK("xoffset not supported\n");
return -EINVAL;
}
if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
DPRINTK("interlace not supported\n");
return -EINVAL;
}
var->xres = (var->xres + 31) & ~31; /* could sometimes be 8 */
lpitch = var->xres * ((var->bits_per_pixel + 7) >> 3);
if (var->xres < 200 || var->xres > 2048) {
DPRINTK("width not supported: %u\n", var->xres);
return -EINVAL;
}
if (var->yres < 200 || var->yres > 4095) {
DPRINTK("height not supported: %u\n", var->yres);
return -EINVAL;
}
if (lpitch * var->yres_virtual > info->fix.smem_len) {
DPRINTK("no memory for screen (%ux%ux%u)\n",
var->xres, var->yres_virtual, var->bits_per_pixel);
return -EINVAL;
}
if (PICOS2KHZ(var->pixclock) > PM3_MAX_PIXCLOCK) {
DPRINTK("pixclock too high (%ldKHz)\n",
PICOS2KHZ(var->pixclock));
return -EINVAL;
}
var->accel_flags = 0; /* Can't mmap if this is on */
DPRINTK("Checking graphics mode at %dx%d depth %d\n",
var->xres, var->yres, var->bits_per_pixel);
return 0;
}
static int pm3fb_set_par(struct fb_info *info)
{
struct pm3_par *par = info->par;
const u32 xres = (info->var.xres + 31) & ~31;
const unsigned bpp = info->var.bits_per_pixel;
par->base = pm3fb_shift_bpp(bpp, (info->var.yoffset * xres)
+ info->var.xoffset);
par->video = 0;
if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
par->video |= PM3VideoControl_HSYNC_ACTIVE_HIGH;
else
par->video |= PM3VideoControl_HSYNC_ACTIVE_LOW;
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
par->video |= PM3VideoControl_VSYNC_ACTIVE_HIGH;
else
par->video |= PM3VideoControl_VSYNC_ACTIVE_LOW;
if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
par->video |= PM3VideoControl_LINE_DOUBLE_ON;
if ((info->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
par->video |= PM3VideoControl_ENABLE;
else
DPRINTK("PM3Video disabled\n");
switch (bpp) {
case 8:
par->video |= PM3VideoControl_PIXELSIZE_8BIT;
break;
case 16:
par->video |= PM3VideoControl_PIXELSIZE_16BIT;
break;
case 32:
par->video |= PM3VideoControl_PIXELSIZE_32BIT;
break;
default:
DPRINTK("Unsupported depth\n");
break;
}
info->fix.visual =
(bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
info->fix.line_length = ((info->var.xres_virtual + 7) >> 3) * bpp;
/* pm3fb_clear_memory(info, 0);*/
pm3fb_clear_colormap(par, 0, 0, 0);
PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, 0);
pm3fb_init_engine(info);
pm3fb_write_mode(info);
return 0;
}
static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
struct pm3_par *par = info->par;
if (regno >= 256) /* no. of hw registers */
return -EINVAL;
/* grayscale works only partially under directcolor */
/* grayscale = 0.30*R + 0.59*G + 0.11*B */
if (info->var.grayscale)
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
/* Directcolor:
* var->{color}.offset contains start of bitfield
* var->{color}.length contains length of bitfield
* {hardwarespecific} contains width of DAC
* pseudo_palette[X] is programmed to (X << red.offset) |
* (X << green.offset) |
* (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = SUM(var->{color}.length)
*
* Pseudocolor:
* var->{color}.offset is 0
* var->{color}.length contains width of DAC or the number
* of unique colors available (color depth)
* pseudo_palette is not used
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = var->{color}.length
*/
/*
* This is the point where the color is converted to something that
* is acceptable by the hardware.
*/
#define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
red = CNVT_TOHW(red, info->var.red.length);
green = CNVT_TOHW(green, info->var.green.length);
blue = CNVT_TOHW(blue, info->var.blue.length);
transp = CNVT_TOHW(transp, info->var.transp.length);
#undef CNVT_TOHW
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
u32 v;
if (regno >= 16)
return -EINVAL;
v = (red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset) |
(transp << info->var.transp.offset);
switch (info->var.bits_per_pixel) {
case 8:
break;
case 16:
case 32:
((u32 *)(info->pseudo_palette))[regno] = v;
break;
}
return 0;
} else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
pm3fb_set_color(par, regno, red, green, blue);
return 0;
}
static int pm3fb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct pm3_par *par = info->par;
const u32 xres = (info->var.xres + 31) & ~31;
par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
(var->yoffset * xres)
+ var->xoffset);
PM3_WAIT(par, 1);
PM3_WRITE_REG(par, PM3ScreenBase, par->base);
return 0;
}
static int pm3fb_blank(int blank_mode, struct fb_info *info)
{
struct pm3_par *par = info->par;
u32 video = par->video;
/*
* Oxygen VX1 - it appears that setting PM3VideoControl and
* then PM3RD_SyncControl to the same SYNC settings undoes
* any net change - they seem to xor together. Only set the
* sync options in PM3RD_SyncControl. --rmk
*/
video &= ~(PM3VideoControl_HSYNC_MASK |
PM3VideoControl_VSYNC_MASK);
video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
PM3VideoControl_VSYNC_ACTIVE_HIGH;
switch (blank_mode) {
case FB_BLANK_UNBLANK:
video |= PM3VideoControl_ENABLE;
break;
case FB_BLANK_NORMAL:
video &= ~PM3VideoControl_ENABLE;
break;
case FB_BLANK_HSYNC_SUSPEND:
video &= ~(PM3VideoControl_HSYNC_MASK |
PM3VideoControl_BLANK_ACTIVE_LOW);
break;
case FB_BLANK_VSYNC_SUSPEND:
video &= ~(PM3VideoControl_VSYNC_MASK |
PM3VideoControl_BLANK_ACTIVE_LOW);
break;
case FB_BLANK_POWERDOWN:
video &= ~(PM3VideoControl_HSYNC_MASK |
PM3VideoControl_VSYNC_MASK |
PM3VideoControl_BLANK_ACTIVE_LOW);
break;
default:
DPRINTK("Unsupported blanking %d\n", blank_mode);
return 1;
}
PM3_WAIT(par, 1);
PM3_WRITE_REG(par, PM3VideoControl, video);
return 0;
}
/*
* Frame buffer operations
*/
static struct fb_ops pm3fb_ops = {
.owner = THIS_MODULE,
.fb_check_var = pm3fb_check_var,
.fb_set_par = pm3fb_set_par,
.fb_setcolreg = pm3fb_setcolreg,
.fb_pan_display = pm3fb_pan_display,
.fb_fillrect = pm3fb_fillrect,
.fb_copyarea = pm3fb_copyarea,
.fb_imageblit = pm3fb_imageblit,
.fb_blank = pm3fb_blank,
.fb_sync = pm3fb_sync,
.fb_cursor = pm3fb_cursor,
};
/* ------------------------------------------------------------------------- */
/*
* Initialization
*/
/* mmio register are already mapped when this function is called */
/* the pm3fb_fix.smem_start is also set */
static unsigned long pm3fb_size_memory(struct pm3_par *par)
{
unsigned long memsize = 0;
unsigned long tempBypass, i, temp1, temp2;
unsigned char __iomem *screen_mem;
pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */
/* Linear frame buffer - request region and map it. */
if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
"pm3fb smem")) {
printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
return 0;
}
screen_mem =
ioremap_nocache(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
if (!screen_mem) {
printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
return 0;
}
/* TODO: card-specific stuff, *before* accessing *any* FB memory */
/* For Appian Jeronimo 2000 board second head */
tempBypass = PM3_READ_REG(par, PM3MemBypassWriteMask);
DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
PM3_WAIT(par, 1);
PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
/* pm3 split up memory, replicates, and do a lot of
* nasty stuff IMHO ;-)
*/
for (i = 0; i < 32; i++) {
fb_writel(i * 0x00345678,
(screen_mem + (i * 1048576)));
mb();
temp1 = fb_readl((screen_mem + (i * 1048576)));
/* Let's check for wrapover, write will fail at 16MB boundary */
if (temp1 == (i * 0x00345678))
memsize = i;
else
break;
}
DPRINTK("First detect pass already got %ld MB\n", memsize + 1);
if (memsize + 1 == i) {
for (i = 0; i < 32; i++) {
/* Clear first 32MB ; 0 is 0, no need to byteswap */
writel(0x0000000, (screen_mem + (i * 1048576)));
}
wmb();
for (i = 32; i < 64; i++) {
fb_writel(i * 0x00345678,
(screen_mem + (i * 1048576)));
mb();
temp1 =
fb_readl((screen_mem + (i * 1048576)));
temp2 =
fb_readl((screen_mem + ((i - 32) * 1048576)));
/* different value, different RAM... */
if ((temp1 == (i * 0x00345678)) && (temp2 == 0))
memsize = i;
else
break;
}
}
DPRINTK("Second detect pass got %ld MB\n", memsize + 1);
PM3_WAIT(par, 1);
PM3_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
iounmap(screen_mem);
release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
memsize = 1048576 * (memsize + 1);
DPRINTK("Returning 0x%08lx bytes\n", memsize);
return memsize;
}
static int pm3fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct fb_info *info;
struct pm3_par *par;
struct device *device = &dev->dev; /* for pci drivers */
int err;
int retval = -ENXIO;
err = pci_enable_device(dev);
if (err) {
printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err);
return err;
}
/*
* Dynamically allocate info and par
*/
info = framebuffer_alloc(sizeof(struct pm3_par), device);
if (!info)
return -ENOMEM;
par = info->par;
/*
* Here we set the screen_base to the virtual memory address
* for the framebuffer.
*/
pm3fb_fix.mmio_start = pci_resource_start(dev, 0);
pm3fb_fix.mmio_len = PM3_REGS_SIZE;
#if defined(__BIG_ENDIAN)
pm3fb_fix.mmio_start += PM3_REGS_SIZE;
DPRINTK("Adjusting register base for big-endian.\n");
#endif
/* Registers - request region and map it. */
if (!request_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len,
"pm3fb regbase")) {
printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n");
goto err_exit_neither;
}
par->v_regs =
ioremap_nocache(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
if (!par->v_regs) {
printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n",
pm3fb_fix.id);
release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
goto err_exit_neither;
}
/* Linear frame buffer - request region and map it. */
pm3fb_fix.smem_start = pci_resource_start(dev, 1);
pm3fb_fix.smem_len = pm3fb_size_memory(par);
if (!pm3fb_fix.smem_len) {
printk(KERN_WARNING "pm3fb: Can't find memory on board.\n");
goto err_exit_mmio;
}
if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
"pm3fb smem")) {
printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
goto err_exit_mmio;
}
video: fbdev: pm3fb: use arch_phys_wc_add() and ioremap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Jingoo Han <jg1.han@samsung.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-04-21 20:16:34 +00:00
info->screen_base = ioremap_wc(pm3fb_fix.smem_start,
pm3fb_fix.smem_len);
if (!info->screen_base) {
printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
goto err_exit_mmio;
}
info->screen_size = pm3fb_fix.smem_len;
if (!nomtrr)
video: fbdev: pm3fb: use arch_phys_wc_add() and ioremap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Jingoo Han <jg1.han@samsung.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-04-21 20:16:34 +00:00
par->wc_cookie = arch_phys_wc_add(pm3fb_fix.smem_start,
pm3fb_fix.smem_len);
info->fbops = &pm3fb_ops;
par->video = PM3_READ_REG(par, PM3VideoControl);
info->fix = pm3fb_fix;
info->pseudo_palette = par->palette;
info->flags = FBINFO_DEFAULT |
FBINFO_HWACCEL_XPAN |
FBINFO_HWACCEL_YPAN |
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_FILLRECT;
if (noaccel) {
printk(KERN_DEBUG "disabling acceleration\n");
info->flags |= FBINFO_HWACCEL_DISABLED;
}
info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL);
if (!info->pixmap.addr) {
retval = -ENOMEM;
goto err_exit_pixmap;
}
info->pixmap.size = PM3_PIXMAP_SIZE;
info->pixmap.buf_align = 4;
info->pixmap.scan_align = 4;
info->pixmap.access_align = 32;
info->pixmap.flags = FB_PIXMAP_SYSTEM;
/*
* This should give a reasonable default video mode. The following is
* done when we can set a video mode.
*/
if (!mode_option)
mode_option = "640x480@60";
retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
if (!retval || retval == 4) {
retval = -EINVAL;
goto err_exit_both;
}
if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
retval = -ENOMEM;
goto err_exit_both;
}
/*
* For drivers that can...
*/
pm3fb_check_var(&info->var, info);
if (register_framebuffer(info) < 0) {
retval = -EINVAL;
goto err_exit_all;
}
fb_info(info, "%s frame buffer device\n", info->fix.id);
pci_set_drvdata(dev, info);
return 0;
err_exit_all:
fb_dealloc_cmap(&info->cmap);
err_exit_both:
kfree(info->pixmap.addr);
err_exit_pixmap:
iounmap(info->screen_base);
release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
err_exit_mmio:
iounmap(par->v_regs);
release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
err_exit_neither:
framebuffer_release(info);
return retval;
}
/*
* Cleanup
*/
static void pm3fb_remove(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
if (info) {
struct fb_fix_screeninfo *fix = &info->fix;
struct pm3_par *par = info->par;
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
video: fbdev: pm3fb: use arch_phys_wc_add() and ioremap_wc() This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Jingoo Han <jg1.han@samsung.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-04-21 20:16:34 +00:00
arch_phys_wc_del(par->wc_cookie);
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
release_mem_region(fix->mmio_start, fix->mmio_len);
kfree(info->pixmap.addr);
framebuffer_release(info);
}
}
static struct pci_device_id pm3fb_id_table[] = {
{ PCI_VENDOR_ID_3DLABS, 0x0a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, }
};
/* For PCI drivers */
static struct pci_driver pm3fb_driver = {
.name = "pm3fb",
.id_table = pm3fb_id_table,
.probe = pm3fb_probe,
.remove = pm3fb_remove,
};
MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
#ifndef MODULE
/*
* Setup
*/
/*
* Only necessary if your driver takes special options,
* otherwise we fall back on the generic fb_setup().
*/
static int __init pm3fb_setup(char *options)
{
char *this_opt;
/* Parse user specified options (`video=pm3fb:') */
if (!options || !*options)
return 0;
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!*this_opt)
continue;
else if (!strncmp(this_opt, "noaccel", 7))
noaccel = 1;
else if (!strncmp(this_opt, "hwcursor=", 9))
hwcursor = simple_strtoul(this_opt + 9, NULL, 0);
else if (!strncmp(this_opt, "nomtrr", 6))
nomtrr = 1;
else
mode_option = this_opt;
}
return 0;
}
#endif /* MODULE */
static int __init pm3fb_init(void)
{
/*
* For kernel boot options (in 'video=pm3fb:<options>' format)
*/
#ifndef MODULE
char *option = NULL;
if (fb_get_options("pm3fb", &option))
return -ENODEV;
pm3fb_setup(option);
#endif
return pci_register_driver(&pm3fb_driver);
}
#ifdef MODULE
static void __exit pm3fb_exit(void)
{
pci_unregister_driver(&pm3fb_driver);
}
module_exit(pm3fb_exit);
#endif
module_init(pm3fb_init);
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
module_param(noaccel, bool, 0);
MODULE_PARM_DESC(noaccel, "Disable acceleration");
module_param(hwcursor, int, 0644);
MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
"(1=enable, 0=disable, default=1)");
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
MODULE_LICENSE("GPL");