linux/net/tipc/crypto.h

201 lines
7.3 KiB
C
Raw Normal View History

tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
net/tipc: fix tipc header files for kernel-doc Fix tipc header files for adding to the networking docbook. Remove some uses of "/**" that were not kernel-doc notation. Fix some source formatting to eliminate Sphinx warnings. Add missing struct member and function argument kernel-doc descriptions. Correct the description of a couple of struct members that were marked as "(FIXME)". Documentation/networking/tipc:18: ../net/tipc/name_table.h:65: WARNING: Unexpected indentation. Documentation/networking/tipc:18: ../net/tipc/name_table.h:66: WARNING: Block quote ends without a blank line; unexpected unindent. ../net/tipc/bearer.h:128: warning: Function parameter or member 'min_win' not described in 'tipc_media' ../net/tipc/bearer.h:128: warning: Function parameter or member 'max_win' not described in 'tipc_media' ../net/tipc/bearer.h:171: warning: Function parameter or member 'min_win' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'max_win' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'disc' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'up' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'refcnt' not described in 'tipc_bearer' ../net/tipc/name_distr.h:68: warning: Function parameter or member 'port' not described in 'distr_item' ../net/tipc/name_table.h:111: warning: Function parameter or member 'services' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'cluster_scope_lock' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'rc_dests' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'snd_nxt' not described in 'name_table' ../net/tipc/subscr.h:67: warning: Function parameter or member 'kref' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'net' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'service_list' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'conid' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'inactive' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'lock' not described in 'tipc_subscription' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-29 18:32:43 +00:00
/*
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
* net/tipc/crypto.h: Include file for TIPC crypto
*
* Copyright (c) 2019, Ericsson AB
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef CONFIG_TIPC_CRYPTO
#ifndef _TIPC_CRYPTO_H
#define _TIPC_CRYPTO_H
#include "core.h"
#include "node.h"
#include "msg.h"
#include "bearer.h"
#define TIPC_EVERSION 7
/* AEAD aes(gcm) */
#define TIPC_AES_GCM_KEY_SIZE_128 16
#define TIPC_AES_GCM_KEY_SIZE_192 24
#define TIPC_AES_GCM_KEY_SIZE_256 32
#define TIPC_AES_GCM_SALT_SIZE 4
#define TIPC_AES_GCM_IV_SIZE 12
#define TIPC_AES_GCM_TAG_SIZE 16
net/tipc: fix tipc header files for kernel-doc Fix tipc header files for adding to the networking docbook. Remove some uses of "/**" that were not kernel-doc notation. Fix some source formatting to eliminate Sphinx warnings. Add missing struct member and function argument kernel-doc descriptions. Correct the description of a couple of struct members that were marked as "(FIXME)". Documentation/networking/tipc:18: ../net/tipc/name_table.h:65: WARNING: Unexpected indentation. Documentation/networking/tipc:18: ../net/tipc/name_table.h:66: WARNING: Block quote ends without a blank line; unexpected unindent. ../net/tipc/bearer.h:128: warning: Function parameter or member 'min_win' not described in 'tipc_media' ../net/tipc/bearer.h:128: warning: Function parameter or member 'max_win' not described in 'tipc_media' ../net/tipc/bearer.h:171: warning: Function parameter or member 'min_win' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'max_win' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'disc' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'up' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'refcnt' not described in 'tipc_bearer' ../net/tipc/name_distr.h:68: warning: Function parameter or member 'port' not described in 'distr_item' ../net/tipc/name_table.h:111: warning: Function parameter or member 'services' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'cluster_scope_lock' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'rc_dests' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'snd_nxt' not described in 'name_table' ../net/tipc/subscr.h:67: warning: Function parameter or member 'kref' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'net' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'service_list' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'conid' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'inactive' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'lock' not described in 'tipc_subscription' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-29 18:32:43 +00:00
/*
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
* TIPC crypto modes:
* - CLUSTER_KEY:
* One single key is used for both TX & RX in all nodes in the cluster.
* - PER_NODE_KEY:
* Each nodes in the cluster has one TX key, for RX a node needs to know
* its peers' TX key for the decryption of messages from those nodes.
*/
enum {
CLUSTER_KEY = 1,
PER_NODE_KEY = (1 << 1),
};
extern int sysctl_tipc_max_tfms __read_mostly;
tipc: add automatic session key exchange With support from the master key option in the previous commit, it becomes easy to make frequent updates/exchanges of session keys between authenticated cluster nodes. Basically, there are two situations where the key exchange will take in place: - When a new node joins the cluster (with the master key), it will need to get its peer's TX key, so that be able to decrypt further messages from that peer. - When a new session key is generated (by either user manual setting or later automatic rekeying feature), the key will be distributed to all peer nodes in the cluster. A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO /KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by using the master key before sending out. Upon receipt of the message it will be decrypted in the same way as regular messages, then attached as the sender's RX key in the receiver node. In this way, the key exchange is reliable by the link layer, as well as security, integrity and authenticity by the crypto layer. Also, the forward security will be easily achieved by user changing the master key actively but this should not be required very frequently. The key exchange feature is independent on the presence of a master key Note however that the master key still is needed for new nodes to be able to join the cluster. It is also optional, and can be turned off/on via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled]. Backward compatibility is guaranteed because for nodes that do not have master key support, key exchange using master key ie. tx_key = 0 if any will be shortly discarded at the message validation step. In other words, the key exchange feature will be automatically disabled to those nodes. v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'" error in node.c. The function only exists when built with the TIPC "CONFIG_TIPC_CRYPTO" option. v3: use 'info->extack' for a message emitted due to netlink operations instead (- David's comment). Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:28 +00:00
extern int sysctl_tipc_key_exchange_enabled __read_mostly;
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
net/tipc: fix tipc header files for kernel-doc Fix tipc header files for adding to the networking docbook. Remove some uses of "/**" that were not kernel-doc notation. Fix some source formatting to eliminate Sphinx warnings. Add missing struct member and function argument kernel-doc descriptions. Correct the description of a couple of struct members that were marked as "(FIXME)". Documentation/networking/tipc:18: ../net/tipc/name_table.h:65: WARNING: Unexpected indentation. Documentation/networking/tipc:18: ../net/tipc/name_table.h:66: WARNING: Block quote ends without a blank line; unexpected unindent. ../net/tipc/bearer.h:128: warning: Function parameter or member 'min_win' not described in 'tipc_media' ../net/tipc/bearer.h:128: warning: Function parameter or member 'max_win' not described in 'tipc_media' ../net/tipc/bearer.h:171: warning: Function parameter or member 'min_win' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'max_win' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'disc' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'up' not described in 'tipc_bearer' ../net/tipc/bearer.h:171: warning: Function parameter or member 'refcnt' not described in 'tipc_bearer' ../net/tipc/name_distr.h:68: warning: Function parameter or member 'port' not described in 'distr_item' ../net/tipc/name_table.h:111: warning: Function parameter or member 'services' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'cluster_scope_lock' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'rc_dests' not described in 'name_table' ../net/tipc/name_table.h:111: warning: Function parameter or member 'snd_nxt' not described in 'name_table' ../net/tipc/subscr.h:67: warning: Function parameter or member 'kref' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'net' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'service_list' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'conid' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'inactive' not described in 'tipc_subscription' ../net/tipc/subscr.h:67: warning: Function parameter or member 'lock' not described in 'tipc_subscription' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-29 18:32:43 +00:00
/*
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
* TIPC encryption message format:
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0
* 1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
tipc: introduce encryption master key In addition to the supported cluster & per-node encryption keys for the en/decryption of TIPC messages, we now introduce one option for user to set a cluster key as 'master key', which is simply a symmetric key like the former but has a longer life cycle. It has two purposes: - Authentication of new member nodes in the cluster. New nodes, having no knowledge of current session keys in the cluster will still be able to join the cluster as long as they know the master key. This is because all neighbor discovery (LINK_CONFIG) messages must be encrypted with this key. - Encryption of session encryption keys during automatic exchange and update of those.This is a feature we will introduce in a later commit in this series. We insert the new key into the currently unused slot 0 in the key array and start using it immediately once the user has set it. After joining, a node only knowing the master key should be fully communicable to existing nodes in the cluster, although those nodes may have their own session keys activated (i.e. not the master one). To support this, we define a 'grace period', starting from the time a node itself reports having no RX keys, so the existing nodes will use the master key for encryption instead. The grace period can be extended but will automatically stop after e.g. 5 seconds without a new report. This is also the basis for later key exchanging feature as the new node will be impossible to decrypt anything without the support from master key. For user to set a master key, we define a new netlink flag - 'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key' netlink command to specify the setting key to be a master key. Above all, the traditional cluster/per-node key mechanism is guaranteed to work when user comes not to use this master key option. This is also compatible to legacy nodes without the feature supported. Even this master key can be updated without any interruption of cluster connectivity but is so is needed, this has to be coordinated and set by the user. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:27 +00:00
* w0:|Ver=7| User |D|TX |RX |K|M|N| Rsvd |
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* w1:| Seqno |
* w2:| (8 octets) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* w3:\ Prevnode \
* / (4 or 16 octets) /
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* \ \
* / Encrypted complete TIPC V2 header and user data /
* \ \
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | |
* | AuthTag |
* | (16 octets) |
* | |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* Word0:
* Ver : = 7 i.e. TIPC encryption message version
* User : = 7 (for LINK_PROTOCOL); = 13 (for LINK_CONFIG) or = 0
* D : The destined bit i.e. the message's destination node is
* "known" or not at the message encryption
* TX : TX key used for the message encryption
* RX : Currently RX active key corresponding to the destination
* node's TX key (when the "D" bit is set)
* K : Keep-alive bit (for RPS, LINK_PROTOCOL/STATE_MSG only)
tipc: introduce encryption master key In addition to the supported cluster & per-node encryption keys for the en/decryption of TIPC messages, we now introduce one option for user to set a cluster key as 'master key', which is simply a symmetric key like the former but has a longer life cycle. It has two purposes: - Authentication of new member nodes in the cluster. New nodes, having no knowledge of current session keys in the cluster will still be able to join the cluster as long as they know the master key. This is because all neighbor discovery (LINK_CONFIG) messages must be encrypted with this key. - Encryption of session encryption keys during automatic exchange and update of those.This is a feature we will introduce in a later commit in this series. We insert the new key into the currently unused slot 0 in the key array and start using it immediately once the user has set it. After joining, a node only knowing the master key should be fully communicable to existing nodes in the cluster, although those nodes may have their own session keys activated (i.e. not the master one). To support this, we define a 'grace period', starting from the time a node itself reports having no RX keys, so the existing nodes will use the master key for encryption instead. The grace period can be extended but will automatically stop after e.g. 5 seconds without a new report. This is also the basis for later key exchanging feature as the new node will be impossible to decrypt anything without the support from master key. For user to set a master key, we define a new netlink flag - 'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key' netlink command to specify the setting key to be a master key. Above all, the traditional cluster/per-node key mechanism is guaranteed to work when user comes not to use this master key option. This is also compatible to legacy nodes without the feature supported. Even this master key can be updated without any interruption of cluster connectivity but is so is needed, this has to be coordinated and set by the user. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:27 +00:00
* M : Bit indicates if sender has master key
* N : Bit indicates if sender has no RX keys corresponding to the
* receiver's TX (when the "D" bit is set)
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
* Rsvd : Reserved bit, field
* Word1-2:
* Seqno : The 64-bit sequence number of the encrypted message, also
* part of the nonce used for the message encryption/decryption
* Word3-:
* Prevnode: The source node address, or ID in case LINK_CONFIG only
* AuthTag : The authentication tag for the message integrity checking
* generated by the message encryption
*/
struct tipc_ehdr {
union {
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
__u8 destined:1,
user:4,
version:3;
tipc: introduce encryption master key In addition to the supported cluster & per-node encryption keys for the en/decryption of TIPC messages, we now introduce one option for user to set a cluster key as 'master key', which is simply a symmetric key like the former but has a longer life cycle. It has two purposes: - Authentication of new member nodes in the cluster. New nodes, having no knowledge of current session keys in the cluster will still be able to join the cluster as long as they know the master key. This is because all neighbor discovery (LINK_CONFIG) messages must be encrypted with this key. - Encryption of session encryption keys during automatic exchange and update of those.This is a feature we will introduce in a later commit in this series. We insert the new key into the currently unused slot 0 in the key array and start using it immediately once the user has set it. After joining, a node only knowing the master key should be fully communicable to existing nodes in the cluster, although those nodes may have their own session keys activated (i.e. not the master one). To support this, we define a 'grace period', starting from the time a node itself reports having no RX keys, so the existing nodes will use the master key for encryption instead. The grace period can be extended but will automatically stop after e.g. 5 seconds without a new report. This is also the basis for later key exchanging feature as the new node will be impossible to decrypt anything without the support from master key. For user to set a master key, we define a new netlink flag - 'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key' netlink command to specify the setting key to be a master key. Above all, the traditional cluster/per-node key mechanism is guaranteed to work when user comes not to use this master key option. This is also compatible to legacy nodes without the feature supported. Even this master key can be updated without any interruption of cluster connectivity but is so is needed, this has to be coordinated and set by the user. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:27 +00:00
__u8 reserved_1:1,
rx_nokey:1,
master_key:1,
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
keepalive:1,
rx_key_active:2,
tx_key:2;
#elif defined(__BIG_ENDIAN_BITFIELD)
__u8 version:3,
user:4,
destined:1;
__u8 tx_key:2,
rx_key_active:2,
keepalive:1,
tipc: introduce encryption master key In addition to the supported cluster & per-node encryption keys for the en/decryption of TIPC messages, we now introduce one option for user to set a cluster key as 'master key', which is simply a symmetric key like the former but has a longer life cycle. It has two purposes: - Authentication of new member nodes in the cluster. New nodes, having no knowledge of current session keys in the cluster will still be able to join the cluster as long as they know the master key. This is because all neighbor discovery (LINK_CONFIG) messages must be encrypted with this key. - Encryption of session encryption keys during automatic exchange and update of those.This is a feature we will introduce in a later commit in this series. We insert the new key into the currently unused slot 0 in the key array and start using it immediately once the user has set it. After joining, a node only knowing the master key should be fully communicable to existing nodes in the cluster, although those nodes may have their own session keys activated (i.e. not the master one). To support this, we define a 'grace period', starting from the time a node itself reports having no RX keys, so the existing nodes will use the master key for encryption instead. The grace period can be extended but will automatically stop after e.g. 5 seconds without a new report. This is also the basis for later key exchanging feature as the new node will be impossible to decrypt anything without the support from master key. For user to set a master key, we define a new netlink flag - 'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key' netlink command to specify the setting key to be a master key. Above all, the traditional cluster/per-node key mechanism is guaranteed to work when user comes not to use this master key option. This is also compatible to legacy nodes without the feature supported. Even this master key can be updated without any interruption of cluster connectivity but is so is needed, this has to be coordinated and set by the user. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:27 +00:00
master_key:1,
rx_nokey:1,
reserved_1:1;
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
#else
#error "Please fix <asm/byteorder.h>"
#endif
__be16 reserved_2;
} __packed;
__be32 w0;
};
__be64 seqno;
union {
__be32 addr;
__u8 id[NODE_ID_LEN]; /* For a LINK_CONFIG message only! */
};
#define EHDR_SIZE (offsetof(struct tipc_ehdr, addr) + sizeof(__be32))
#define EHDR_CFG_SIZE (sizeof(struct tipc_ehdr))
#define EHDR_MIN_SIZE (EHDR_SIZE)
#define EHDR_MAX_SIZE (EHDR_CFG_SIZE)
#define EMSG_OVERHEAD (EHDR_SIZE + TIPC_AES_GCM_TAG_SIZE)
} __packed;
int tipc_crypto_start(struct tipc_crypto **crypto, struct net *net,
struct tipc_node *node);
void tipc_crypto_stop(struct tipc_crypto **crypto);
void tipc_crypto_timeout(struct tipc_crypto *rx);
int tipc_crypto_xmit(struct net *net, struct sk_buff **skb,
struct tipc_bearer *b, struct tipc_media_addr *dst,
struct tipc_node *__dnode);
int tipc_crypto_rcv(struct net *net, struct tipc_crypto *rx,
struct sk_buff **skb, struct tipc_bearer *b);
int tipc_crypto_key_init(struct tipc_crypto *c, struct tipc_aead_key *ukey,
tipc: introduce encryption master key In addition to the supported cluster & per-node encryption keys for the en/decryption of TIPC messages, we now introduce one option for user to set a cluster key as 'master key', which is simply a symmetric key like the former but has a longer life cycle. It has two purposes: - Authentication of new member nodes in the cluster. New nodes, having no knowledge of current session keys in the cluster will still be able to join the cluster as long as they know the master key. This is because all neighbor discovery (LINK_CONFIG) messages must be encrypted with this key. - Encryption of session encryption keys during automatic exchange and update of those.This is a feature we will introduce in a later commit in this series. We insert the new key into the currently unused slot 0 in the key array and start using it immediately once the user has set it. After joining, a node only knowing the master key should be fully communicable to existing nodes in the cluster, although those nodes may have their own session keys activated (i.e. not the master one). To support this, we define a 'grace period', starting from the time a node itself reports having no RX keys, so the existing nodes will use the master key for encryption instead. The grace period can be extended but will automatically stop after e.g. 5 seconds without a new report. This is also the basis for later key exchanging feature as the new node will be impossible to decrypt anything without the support from master key. For user to set a master key, we define a new netlink flag - 'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key' netlink command to specify the setting key to be a master key. Above all, the traditional cluster/per-node key mechanism is guaranteed to work when user comes not to use this master key option. This is also compatible to legacy nodes without the feature supported. Even this master key can be updated without any interruption of cluster connectivity but is so is needed, this has to be coordinated and set by the user. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:27 +00:00
u8 mode, bool master_key);
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
void tipc_crypto_key_flush(struct tipc_crypto *c);
tipc: add automatic session key exchange With support from the master key option in the previous commit, it becomes easy to make frequent updates/exchanges of session keys between authenticated cluster nodes. Basically, there are two situations where the key exchange will take in place: - When a new node joins the cluster (with the master key), it will need to get its peer's TX key, so that be able to decrypt further messages from that peer. - When a new session key is generated (by either user manual setting or later automatic rekeying feature), the key will be distributed to all peer nodes in the cluster. A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO /KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by using the master key before sending out. Upon receipt of the message it will be decrypted in the same way as regular messages, then attached as the sender's RX key in the receiver node. In this way, the key exchange is reliable by the link layer, as well as security, integrity and authenticity by the crypto layer. Also, the forward security will be easily achieved by user changing the master key actively but this should not be required very frequently. The key exchange feature is independent on the presence of a master key Note however that the master key still is needed for new nodes to be able to join the cluster. It is also optional, and can be turned off/on via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled]. Backward compatibility is guaranteed because for nodes that do not have master key support, key exchange using master key ie. tx_key = 0 if any will be shortly discarded at the message validation step. In other words, the key exchange feature will be automatically disabled to those nodes. v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'" error in node.c. The function only exists when built with the TIPC "CONFIG_TIPC_CRYPTO" option. v3: use 'info->extack' for a message emitted due to netlink operations instead (- David's comment). Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:28 +00:00
int tipc_crypto_key_distr(struct tipc_crypto *tx, u8 key,
struct tipc_node *dest);
void tipc_crypto_msg_rcv(struct net *net, struct sk_buff *skb);
tipc: add automatic rekeying for encryption key Rekeying is required for security since a key is less secure when using for a long time. Also, key will be detached when its nonce value (or seqno ...) is exhausted. We now make the rekeying process automatic and configurable by user. Basically, TIPC will at a specific interval generate a new key by using the kernel 'Random Number Generator' cipher, then attach it as the node TX key and securely distribute to others in the cluster as RX keys (- the key exchange). The automatic key switching will then take over, and make the new key active shortly. Afterwards, the traffic from this node will be encrypted with the new session key. The same can happen in peer nodes but not necessarily at the same time. For simplicity, the automatically generated key will be initiated as a per node key. It is not too hard to also support a cluster key rekeying (e.g. a given node will generate a unique cluster key and update to the others in the cluster...), but that doesn't bring much benefit, while a per-node key is even more secure. We also enable user to force a rekeying or change the rekeying interval via netlink, the new 'set key' command option: 'TIPC_NLA_NODE_REKEYING' is added for these purposes as follows: - A value >= 1 will be set as the rekeying interval (in minutes); - A value of 0 will disable the rekeying; - A value of 'TIPC_REKEYING_NOW' (~0) will force an immediate rekeying; The default rekeying interval is (60 * 24) minutes i.e. done every day. There isn't any restriction for the value but user shouldn't set it too small or too large which results in an "ineffective" rekeying (thats ok for testing though). Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:29 +00:00
void tipc_crypto_rekeying_sched(struct tipc_crypto *tx, bool changed,
u32 new_intv);
int tipc_aead_key_validate(struct tipc_aead_key *ukey, struct genl_info *info);
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
bool tipc_ehdr_validate(struct sk_buff *skb);
tipc: add automatic session key exchange With support from the master key option in the previous commit, it becomes easy to make frequent updates/exchanges of session keys between authenticated cluster nodes. Basically, there are two situations where the key exchange will take in place: - When a new node joins the cluster (with the master key), it will need to get its peer's TX key, so that be able to decrypt further messages from that peer. - When a new session key is generated (by either user manual setting or later automatic rekeying feature), the key will be distributed to all peer nodes in the cluster. A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO /KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by using the master key before sending out. Upon receipt of the message it will be decrypted in the same way as regular messages, then attached as the sender's RX key in the receiver node. In this way, the key exchange is reliable by the link layer, as well as security, integrity and authenticity by the crypto layer. Also, the forward security will be easily achieved by user changing the master key actively but this should not be required very frequently. The key exchange feature is independent on the presence of a master key Note however that the master key still is needed for new nodes to be able to join the cluster. It is also optional, and can be turned off/on via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled]. Backward compatibility is guaranteed because for nodes that do not have master key support, key exchange using master key ie. tx_key = 0 if any will be shortly discarded at the message validation step. In other words, the key exchange feature will be automatically disabled to those nodes. v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'" error in node.c. The function only exists when built with the TIPC "CONFIG_TIPC_CRYPTO" option. v3: use 'info->extack' for a message emitted due to netlink operations instead (- David's comment). Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 01:17:28 +00:00
static inline u32 msg_key_gen(struct tipc_msg *m)
{
return msg_bits(m, 4, 16, 0xffff);
}
static inline void msg_set_key_gen(struct tipc_msg *m, u32 gen)
{
msg_set_bits(m, 4, 16, 0xffff, gen);
}
static inline u32 msg_key_mode(struct tipc_msg *m)
{
return msg_bits(m, 4, 0, 0xf);
}
static inline void msg_set_key_mode(struct tipc_msg *m, u32 mode)
{
msg_set_bits(m, 4, 0, 0xf, mode);
}
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 05:05:11 +00:00
#endif /* _TIPC_CRYPTO_H */
#endif