system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-11-05 18:23:50 +00:00
Code Issues Projects Releases Packages Wiki Activity
linux/drivers/usb/serial/ftdi_sio.c

2454 lines
85 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* USB FTDI SIO driver
*
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
* Copyright (C) 2009 - 2010
* Johan Hovold (jhovold@gmail.com)
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
* Copyright (C) 1999 - 2001
* Greg Kroah-Hartman (greg@kroah.com)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Bill Ryder (bryder@sgi.com)
* Copyright (C) 2002
* Kuba Ober (kuba@mareimbrium.org)
*
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
* See http://ftdi-usb-sio.sourceforge.net for up to date testing info
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* and extra documentation
*
USB: ftdi_sio: remove very old changelog entries from the file. People keep trying to add entries to this section of the driver for things. That's what the Changelog is supposed to be for, not the .c file. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2002-04-09 19:14:34 +00:00
* Change entries from 2004 and earlier can be found in versions of this
* file in kernel versions prior to the 2.6.24 release.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
*/
/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
/* Thanx to FTDI for so kindly providing details of the protocol required */
/* to talk to the device */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* Thanx to gkh and the rest of the usb dev group for all code I have
assimilated :-) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-02 15:18:28 +00:00
#include <linux/mutex.h>
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <linux/usb.h>
#include <linux/serial.h>
[PATCH] USB: move usb-serial.h to include/linux/usb/ USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 04:22:58 +00:00
#include <linux/usb/serial.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include "ftdi_sio.h"
USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-16 20:45:10 +00:00
#include "ftdi_sio_ids.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Version Information
*/
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
#define DRIVER_VERSION "v1.6.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
[PATCH] USB ftdi_sio: user specified VID/PID ftdi_sio: Support one user specified vendor and product ID via a couple of new module parameters. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-28 17:40:32 +00:00
static __u16 vendor = FTDI_VID;
static __u16 product;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
struct ftdi_private {
usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 14:06:19 +00:00
struct kref kref;
USB: ftdi_sio: checkpatch cleanups Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-17 17:33:41 +00:00
enum ftdi_chip_type chip_type;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* type of device, either SIO or FT8U232AM */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
int baud_base; /* baud base clock for divisor setting */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
int custom_divisor; /* custom_divisor kludge, this is for
baud_base (different from what goes to the
chip!) */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
__u16 last_set_data_urb_value ;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* the last data state set - needed for doing
* a break
*/
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
int flags; /* some ASYNC_xxxx flags are supported */
unsigned long last_dtr_rts; /* saved modem control outputs */
USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:08 +00:00
struct async_icount icount;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
char prev_status, diff_status; /* Used for TIOCMIWAIT */
USB: serial: ftdi_sio: add support for TIOCSERGETLSR Willem-Jan noticed that the ftdi_sio driver did not support the TIOCSERGETLSR ioctl, and some userspace programs rely on it. This patch adds the support. Reported-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Tested-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 21:40:42 +00:00
char transmit_empty; /* If transmitter is empty or not */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
struct usb_serial_port *port;
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
unsigned int latency; /* latency setting in use */
USB: ftdi_sio: fix hi-speed device packet size calculation Added a function to set the packet size to be used based on the value from the device endpoint descriptor. The FT2232H and FT4232H hi-speed devices will have wMaxPacketSize of 512 bytes when connected to a USB 2.0 hi-speed host, but will use alternative descriptors with wMaxPacketSize of 64 bytes if connected to a USB 1.1 host or hub. All other FTDI devices have wMaxPacketSize of 64 bytes, except some FT232R and FT245R devices which customers have mistakenly programmed to have wMaxPacketSize of 0 - this is an error and will be overridden to use wMaxPacketSize of 64 bytes. The packet size used is important as it determines where the driver removes the status bytes from the incoming data. If it is incorrect, it will lead to data corruption. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-01 10:48:45 +00:00
unsigned short max_packet_size;
USB: ftdi_sio: Fix locking for change_speed() function The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-13 17:35:14 +00:00
struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
};
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
int (*probe)(struct usb_serial *);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* Special settings for probed ports. */
void (*port_probe)(struct ftdi_private *);
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
};
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
static int ftdi_NDI_device_setup(struct usb_serial *serial);
USB: ftdi_sio: add ST Micro Connect Lite uart support on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-29 14:32:52 +00:00
static int ftdi_stmclite_probe(struct usb_serial *serial);
USB: ftdi_sio: add Calao reference board support Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25 09:46:58 +00:00
static int ftdi_8u2232c_probe(struct usb_serial *serial);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
USB: ftdi_sio: Support for more JTAG adaptors [PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-01 14:08:35 +00:00
static struct ftdi_sio_quirk ftdi_jtag_quirk = {
.probe = ftdi_jtag_probe,
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
};
USB: ftdi_sio: Workaround for broken Matrix Orbital serial port Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-01 18:49:59 +00:00
static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
.probe = ftdi_mtxorb_hack_setup,
};
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
.probe = ftdi_NDI_device_setup,
};
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
.port_probe = ftdi_USB_UIRT_setup,
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
};
static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
.port_probe = ftdi_HE_TIRA1_setup,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
USB: ftdi_sio: add ST Micro Connect Lite uart support on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-29 14:32:52 +00:00
static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
.probe = ftdi_stmclite_probe,
};
USB: ftdi_sio: add Calao reference board support Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25 09:46:58 +00:00
static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
.probe = ftdi_8u2232c_probe,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
* o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
* o 230400 at 12MHz
* so .. 8U232AM's baudrate setting codes are different
* - it has a two byte status code.
* - it returns characters every 16ms (the FTDI does it every 40ms)
*
* the bcdDevice value is used to differentiate FT232BM and FT245BM from
* the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
* combinations in both tables.
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
* FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
* but I don't know if those ever went into mass production. [Ian Abbott]
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
/*
* Device ID not listed? Test via module params product/vendor or
* /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static struct usb_device_id id_table_combined [] = {
USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by: Artur Zimmer <artur128@3dzimmer.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-10 01:51:28 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
USB: ftdi_sio: Added IDs for CTI USB Serial Devices I added new ProdutIds for two devices from CTI GmbH Leipzig. Signed-off-by: Christian Simon <simon@swine.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28 19:54:47 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
USB: ftdi_sio driver - new PIDs Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 09:48:03 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-04 15:09:59 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
USB: add more FTDI device ids Add more usb device ids to the ftdi driver. From: Peter Mack <Peter.Mack@scs-ptc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-22 11:25:11 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
USB: ftdi_sio: device id for Navitator This patch is to add a US Interface, Inc. "Navigator" USB device. Specifically, it's a HAM Radio USB sound modem that also incorporates three pairs of unique FTDI serial ports. The standard Linux FTDI serial driver will only recognize the first two serial ports of an unknown FDTI derived device and this patch adds in recognition to these specific new IDs. Signed-off-by: David A. Ranch <dranch@trinnet.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-27 02:44:33 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
[PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interface Signed-off-by: Razvan Gavril <razvan.g@plutohome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-04 08:35:49 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
[PATCH] USB: ftdi_sio: Adds support for iPlus device. Adds support in ftdi_sio usbserial driver for USB modems sold by Plus GSM Company in Poland. Signed-off-by: Luiz Fernando Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 18:52:41 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
USB: ftdio_sio: New IPlus device ID Reported by Grzegorz Chimosz <gchimi@gmail.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-22 01:34:23 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
USB: ftdi driver pid for dmx-interfaces Please add a usb pid to the ftdi_sio driver. The pid is used by dmx4all dmx-interfaces (for stage lighting). The interfaces are using the usb-id 0403:c850. I added the id to the driver and it works perfectly. I added a patch for linux 2.6.18.1, too. From: Frank Sievertsen <frank@sievertsen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-20 07:43:53 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
USB: Product ID for FT232RL in ftdi_sio Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-04 23:03:26 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
USB: ftdi_sio: add Calao reference board support Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25 09:46:58 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
[PATCH] USB: new device ids for ftdi_sio driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-23 15:36:21 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
USB: ftdi_sio: Add USB Product Id for OpenDCC USB product id registration for the OpenDCC (www.opendcc.de) model railway central unit. Applies to 2.6.21.1. Signed-off-by: Guido Scholz <guido.scholz@bayernline.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08 17:52:41 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
USB: add PIDs for FTDI based OpenDCC hardware Some devices from the OpenDCC project are missing in the list of the FTDI PIDs. These PIDs are listed at http://www.opendcc.de/elektronik/usb/opendcc_usb.html (Sorry for the german only page.) This patch adds the three missing devices. Signed-off-by: Rainer Keller <mail@rainerkeller.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-03 09:55:17 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
USB: add PID for FTDI based OpenDCC hardware The OpenDCC project is developing a new hardware. This patch adds its PID to the list of known FTDI devices. The PID can be found at http://www.opendcc.de/elektronik/usb/opendcc_usb.html Signed-off-by: Rainer Keller <mail@rainerkeller.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-28 10:27:43 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
USB: tty: SprogII DCC controller identifiers Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-07 07:46:04 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
USB: ftdi_sio: add product ID for Lenz LI-USB Add ftdi product ID for Lenz LI-USB, a model train interface. This was NOT tested against 2.6.35, but a similar patch was tested with the CentOS 2.6.18-194.11.1.el5 kernel. It wasn't clear to me what ordering is being used in ftdi_sio.c, so I inserted the ID after another model train entry(SPROG_II). Signed-off-by: Galen Seitz <galens@seitzassoc.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-19 18:15:20 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
USB: ftdi_sio: add PID for Sony Ericsson Urban Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban Signed-off-by: Hakan Kvist <hakan.kvist@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03 11:41:15 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
USB: serial: FTDI with product code FB80 and vendor id 0403 It seems an USB device with vendor id 0403 and product code FB80 has an FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm This device in fact is a true random generantor by comsci: http://comscire.com/Products/R2000KU/ So the following patch should add support for this device if I am correct. Not tested as I do not own this device (I would like support in the kernel so that my entropybroker application (which distributes entrop data (random values) between servers and clients)). From: Folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19 20:14:42 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485 converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001. This should also work with the stable branches for: 2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36 Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-24 09:56:38 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
USB: ftdi_sio: Workaround for broken Matrix Orbital serial port Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-01 18:49:59 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 23:06:26 +00:00
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
USB: Additional PID for the ftdi_sio driver Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-19 04:26:54 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
USB: ftdi_sio: Add USB ID of ADSTech USBX-707 This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm inside hooked up to a pic. With this it should be fairly straightforward to make at least lirc receiving work with this device. I will submit a patch to lirc for that as soon as I have one ready, I'm getting data with minicom with this patch, but need to figure out some more details such as best/correct baudrate. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26 01:08:35 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
USB: add SeaLevel 2106 SeaLINK support to ftdi_sio We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-24 08:52:12 +00:00
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
USB: ftdi_sio: add PID for OCT DK201 docking station Add PID 0x0103 for serial port of the OCT DK201 docking station. Reported-by: Jan Hoogenraad <jan@hoogenraad.net> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-08 15:38:22 +00:00
{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
[PATCH] USB: ftdi_sio: new PID for ELV UM100 ftdi_sio: Add PID for "ELV USB Module UM100". PID sent by Armin Laugher. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:12:13 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products This patch for the ftdi_sio driver adds a bunch of new devices and fixes an incorrect PID: o Fix PID for ELV UO100 (the PID was in fact for ELV UR100). o Add PID ELV UR100 (see above) and ELV ALC 8500 Expert. o Add a whole bunch of other PIDs for ELV USB devices, commented out for now as they may be used by other drivers eventually. (Christian Abt of ELV.de submitted a full list of devices including an indication of which set of drivers are used by default in the MS Windows world. We decided to comment out the devices that use FTDI's D2XX Windows drivers by default.) o Add PIDs for eight devices from Xsens Technologies BV (submitted in a patch against 2.6.12.2 by Patrick Riphagen). o Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-02 13:01:27 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
[PATCH] drivers/usb/serial/ftdi_sio: add PID/VID We would like to add a PID for the Pyramid Appliance Display, which works on USB via FTDI_SIO. Signed-off-by: Thomas Riewe <thomasr@pyramid.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+)
2005-09-29 12:57:29 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
[PATCH] USB: add new device id to ftdi_sio module This is a patch to get the ELV FHZ1000 Home Automation control device to work with Linux. The patch adds a new device ID to the ftdi_sio driver. It is for kernel version 2.6.13.4. Signed-off-by: Martin Hagelin <martin.hagelin@home.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-26 19:10:41 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
USB: add Additional PIDs in ftdi_sio I've developed some devices with FTDI chips (FT232xx). FTDI was so kind to give some own PID's which I can use together with their VID. Some of the devices are already very popular here and I have customers from universities, institutes ..... I use the FTDI VID 0x0403. My PID's are: 0xff38 - IBS US485 (USB<-->RS422/485 interface) 0xff39 - IBS PIC-Programmer 0xff3a - IBS Card reader for PCMCIA SRAM-cards 0xff3b - IBS PK1 - Particel counter 0xff3c - IBS RS232 - Monitor 0xff3d - APP 70 (dust monitoring system) 0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz) 0xff3f - future device The company is "IBS Ing.-Buero Schleusener". From: Thomas Schleusener <thomas@be-schl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 21:50:52 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
USB: serial: ftdi_sio: adding support for TavIR STK500 Adding support for the TavIR STK500 (id 0403:FA33) Atmel AVR programmer device based on FTDI FT232RL. Signed-off-by: Benedek László <benedekl@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-20 01:22:21 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products This patch for the ftdi_sio driver adds a bunch of new devices and fixes an incorrect PID: o Fix PID for ELV UO100 (the PID was in fact for ELV UR100). o Add PID ELV UR100 (see above) and ELV ALC 8500 Expert. o Add a whole bunch of other PIDs for ELV USB devices, commented out for now as they may be used by other drivers eventually. (Christian Abt of ELV.de submitted a full list of devices including an indication of which set of drivers are used by default in the MS Windows world. We decided to comment out the devices that use FTDI's D2XX Windows drivers by default.) o Add PIDs for eight devices from Xsens Technologies BV (submitted in a patch against 2.6.12.2 by Patrick Riphagen). o Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-02 13:01:27 +00:00
/*
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
* ELV devices:
[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products This patch for the ftdi_sio driver adds a bunch of new devices and fixes an incorrect PID: o Fix PID for ELV UO100 (the PID was in fact for ELV UR100). o Add PID ELV UR100 (see above) and ELV ALC 8500 Expert. o Add a whole bunch of other PIDs for ELV USB devices, commented out for now as they may be used by other drivers eventually. (Christian Abt of ELV.de submitted a full list of devices including an indication of which set of drivers are used by default in the MS Windows world. We decided to comment out the devices that use FTDI's D2XX Windows drivers by default.) o Add PIDs for eight devices from Xsens Technologies BV (submitted in a patch against 2.6.12.2 by Patrick Riphagen). o Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-02 13:01:27 +00:00
*/
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PC I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Cc: stable <stable@kernel.org> Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-25 17:32:08 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PC I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Cc: stable <stable@kernel.org> Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-25 17:32:08 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PC I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Cc: stable <stable@kernel.org> Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-25 17:32:08 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
USB: ftdi_sio - really enable EM1010PC Add EM1010PC to ftdi_sio.c Signed-off-by: Sven Andersen <s.andersen@cryonet.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 21:09:11 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PC I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Cc: stable <stable@kernel.org> Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-25 17:32:08 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
USB: ftdi_sio: Add USB Product Id for ELV HS485 USB product id registration for the ELV HS485 USB adapter (www.elv.de) to their home automation bus system. Applies to 2.6.26. Signed-off-by: Andre Schenk <andre@melior.s.bawue.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-28 13:48:46 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT) - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:38 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
USB: ftdi_sio - MachX product ID added below is a patch for the ftdi_sio driver to include a new device ID for CCS MachX PIC programmer. From: Jan Capek <jan@ccsinfo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-28 21:35:12 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
USB: ftdi_sio - product ID's for CCS PIC programmers The product ID's for the following devices have been added: - LOAD-n-GO - ICD-U64 - PRIME-8 Signed-off-by: Jan Capek <jan@ccsinfo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-10 16:58:52 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products This patch for the ftdi_sio driver adds a bunch of new devices and fixes an incorrect PID: o Fix PID for ELV UO100 (the PID was in fact for ELV UR100). o Add PID ELV UR100 (see above) and ELV ALC 8500 Expert. o Add a whole bunch of other PIDs for ELV USB devices, commented out for now as they may be used by other drivers eventually. (Christian Abt of ELV.de submitted a full list of devices including an indication of which set of drivers are used by default in the MS Windows world. We decided to comment out the devices that use FTDI's D2XX Windows drivers by default.) o Add PIDs for eight devices from Xsens Technologies BV (submitted in a patch against 2.6.12.2 by Patrick Riphagen). o Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-02 13:01:27 +00:00
{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
USB: Add Oceanic product ID to ftdi_sio Add Oceanic PID to ftdi_sio driver Oceanic dive computers (such as the VT3 -- http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard FTDI serial converter, with the FTDI vid and a PID of 0xf460. The attached patch adds that pid to ftdi_sio; driver connects to my VT3 after that. Signed-off-by: Vladimir Vukicevic <vladimir@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-04 00:08:43 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
USB: add QL355P power supply ids to fdti_sio
2007-02-27 11:57:12 +00:00
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
[PATCH] USB: VID/PID updates for ftdi_sio driver Some VID/PID updates for the ftdi_sio driver: * The "Gude Analog- und Digitalsysteme GmbH" entries were missing from the "combined" table. * Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from 4n-galaxy.de. * Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to FTDI_RM_CANVIEW_PID. * Added VID/PID for serial converter in Mobility Electronics EasiDock USB 200 (mentioned by Gregory Schmitt). * Added PID for Active Robots USB comms board (mentioned by John Koch). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
2005-04-29 15:06:14 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrograph Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-28 00:36:19 +00:00
{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
USB: serial: ftdi: add CONTEC vendor and product id This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-22 02:03:11 +00:00
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
USB: ftdi_sio: add USB device ID's for B&B Electronics line Reviewed-by: John Pilles <jpilles@bb-elec.com> Signed-off-by: Cliff Brake <cbrake@bec-systems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-01 14:53:42 +00:00
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
[PATCH] USB: VID/PID updates for ftdi_sio driver Some VID/PID updates for the ftdi_sio driver: * The "Gude Analog- und Digitalsysteme GmbH" entries were missing from the "combined" table. * Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from 4n-galaxy.de. * Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to FTDI_RM_CANVIEW_PID. * Added VID/PID for serial converter in Mobility Electronics EasiDock USB 200 (mentioned by Gregory Schmitt). * Added PID for Active Robots USB comms board (mentioned by John Koch). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
2005-04-29 15:06:14 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 12:01:56 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom products This patch for the ftdi_sio driver adds a bunch of new devices and fixes an incorrect PID: o Fix PID for ELV UO100 (the PID was in fact for ELV UR100). o Add PID ELV UR100 (see above) and ELV ALC 8500 Expert. o Add a whole bunch of other PIDs for ELV USB devices, commented out for now as they may be used by other drivers eventually. (Christian Abt of ELV.de submitted a full list of devices including an indication of which set of drivers are used by default in the MS Windows world. We decided to comment out the devices that use FTDI's D2XX Windows drivers by default.) o Add PIDs for eight devices from Xsens Technologies BV (submitted in a patch against 2.6.12.2 by Patrick Riphagen). o Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-02 13:01:27 +00:00
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
[PATCH] USB: VID/PID updates for ftdi_sio driver Some VID/PID updates for the ftdi_sio driver: * The "Gude Analog- und Digitalsysteme GmbH" entries were missing from the "combined" table. * Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from 4n-galaxy.de. * Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to FTDI_RM_CANVIEW_PID. * Added VID/PID for serial converter in Mobility Electronics EasiDock USB 200 (mentioned by Gregory Schmitt). * Added PID for Active Robots USB comms board (mentioned by John Koch). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
2005-04-29 15:06:14 +00:00
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
[PATCH] USB: ftdi_sio: new microHAM device IDs This patch adds a bunch of new device IDs to the ftdi_sio driver for various devices from microHAM using FTDI chips. Micheal Studer supplied the PID for the USB-Y9 device. I examined the INF file in microHAM's Windows driver package for the USB-KW, USB-YS, USB-IC, USB-DB9 and USB-RS232 devices. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-27 14:05:32 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
[PATCH] USB: ftdi_sio: new microHAM and Evolution Robotics devices The attached patch adds the following new devices to the ftdi_sio driver: * microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL). * Evolution Robotics ER1 Control Module submitted by Shawn M. Lavelle. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:31 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
[PATCH] USB: ftdi_sio: new microHAM device IDs This patch adds a bunch of new device IDs to the ftdi_sio driver for various devices from microHAM using FTDI chips. Micheal Studer supplied the PID for the USB-Y9 device. I examined the INF file in microHAM's Windows driver package for the USB-KW, USB-YS, USB-IC, USB-DB9 and USB-RS232 devices. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-27 14:05:32 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
[PATCH] USB: ftdi_sio: new IDs for Teratronik devices This patch adds vendor and product IDs to the ftdi_sio driver's device ID table for two devices from teratronik.de. The device IDs were submitted by O. Wlfelschneider of Teratronik Elektronische Systeme GmbH. The charset of the patch is latin-1, same as the original files. Please apply, thanks! (I've tried to avoid a clash with Andrew Morton's patch to add support for Posiflex PP-7700 printer to the same driver.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-13 16:18:47 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
[PATCH] USB: ftdi_sio: new microHAM and Evolution Robotics devices The attached patch adds the following new devices to the ftdi_sio driver: * microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL). * Evolution Robotics ER1 Control Module submitted by Shawn M. Lavelle. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:31 +00:00
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
USB: Support for the Evolution Scorpion robots The attached (mostly trivial) patches adds support for the Evolution Scorpion Robots. Evolution Robotics supplies a patch against 2.6.8 with their software. My patch is based on their work, so I don't know if I can sign it off, or if you need some Evolution people to do this (which might be hard). The patch adds device ID's for some robots which is trivial. From: Søren Hauberg <hauberg@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Søren
2007-08-08 08:50:17 +00:00
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
[PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras This patch enables direct kernel support for the Artemis and ATIK astronomical based USB CCD cameras. Since all communications with this camera are done via an FTDI 245BM chip, it was only needed to specify the ProductID and VendorID of all three devices. In what tests are concerned, data was transfered from and to the FTDI at the chips Top speed (360KB/s). Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+)
2005-09-23 19:06:50 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras Documentation: Specify grayscale specification on ATIK-ATK16 and ATIK-ATK16HR comments. New: Add ProductID and VendorID for devices ATIK-ATK16C and ATIK-ATK16HRC. These devices are also USB Astronomical CCD cameras that work through an FTDI 245BM chip, share the same base hardware but, it has a colour CCD chip instead of a grayscale one. Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09 13:12:40 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
[PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras This patch enables direct kernel support for the Artemis and ATIK astronomical based USB CCD cameras. Since all communications with this camera are done via an FTDI 245BM chip, it was only needed to specify the ProductID and VendorID of all three devices. In what tests are concerned, data was transfered from and to the FTDI at the chips Top speed (360KB/s). Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+)
2005-09-23 19:06:50 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras Documentation: Specify grayscale specification on ATIK-ATK16 and ATIK-ATK16HR comments. New: Add ProductID and VendorID for devices ATIK-ATK16C and ATIK-ATK16HRC. These devices are also USB Astronomical CCD cameras that work through an FTDI 245BM chip, share the same base hardware but, it has a colour CCD chip instead of a grayscale one. Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09 13:12:40 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
USB: ftdi-sio: Patch to add vendor/device id for ATK_16IC CCD little patches only to add vendor/device id of ATK_16IC CCD cam for astronomy. From: Franco Lanza <nextime@nexlab.it> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-26 02:29:33 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
[PATCH] USB: ftdi_sio: new IDs for KOBIL devices This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Stefan Nies of KOBIL Systems for two of their devices using the FTDI chip. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:45:23 +00:00
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
[PATCH] USB: Support for Posiflex PP-7000 retail printer in Linux This little patch adds recognition of Posiflex PP-7000 retail printer to ftdo_sio module. The printer uses FT232BM bridge programmed with custom VID/PID. The patch posted to lkml and sf.net was for 2.6.11.1 kernel, here is one reworked for 2.6.12. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-09 06:30:59 +00:00
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h this patch includes the Vendor Id for a optic fiber to USB device named TTUSB from thought Technology. It's just add the vendor Id to ftdi_sio.h and add the Vendor ID and model Id to table_combined. Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 16:20:37 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
[PATCH] USB: ftdi_sio: add support for Eclo COM to 1-Wire USB adapter This patch adds support for the Eclo COM to 1-Wire USB adapter <http://www.eclo.pt/products_ibutton_adapters_usb01_en.asp> to the ftdi_sio driver's device ID table. Details were provided by Martin Grill on the ftdi-sio-usb-devel mailing list and I (Ian Abbott) confirmed it matched the INF file in the Eclo's Windows driver package. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-21 14:55:20 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
[PATCH] USB: ftdi_sio: new IDs for Westrex devices This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Cory Lee to support two POS printers made by Westrex International (Model 777 and Model 8900F). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09 17:11:40 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2 The attached patch adds a new PID for the ftdi_sio driver. It will enable support for PC-DJ's DAC-2 controller module (more information on http://www.pcdjhardware.com/DAC2.asp) Signed-off-by: Wouter Paesen <wouter@kangaroot.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-03 13:30:31 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
[PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USB This patch adds recognition of the RR-CirKits LocoBuffer USB to the existing FTDI driver. http://www.rr-cirkits.com Signed-off-by: Nathan Bronson <ngb@sns-usa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-10 04:05:09 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
[PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card reader This patch adds support for an ASK RDR 400 series contactless card reader <http://www.ask.fr/uk/products_and_services/terminals.html> to the ftdi_sio driver's device ID table. The product ID was supplied by Adriano Couto on the ftdi-usb-sio-devel list. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-12 14:20:35 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
USB: serial: Updated support for ICOM devices I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited. I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are. Signed-off-by: Pieter Maes <maescool@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-17 23:26:16 +00:00
{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
[PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID Reader This patch adds support for ACG Identification Technologies GmbH's HF Dual ISO Reader (an RFID tag reader) to the ftdi_sio driver's device ID table. The product ID was supplied by anotonios (anton at goto10 dot org) on the ftdi-usb-sio-devel list and subsequently verified by myself (Ian Abbott). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-04 10:34:25 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
[PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1 This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB product to the ftdi_sio driver's device ID table. The PID was supplied by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list. The PID 0xE050 matches the Windows INF files for this device. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-30 11:36:30 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
[PATCH] USB: new device id for Thorlabs motor driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-17 22:09:15 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
[PATCH] USB: Add one VID/PID to ftdi_sio This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-11 09:36:43 +00:00
{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
USB: New device ID for ftdi_sio usb serial driver The patch adds a new device ID for the Gamma Scout Geiger counter device. Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-06 10:15:02 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
USB serial ftdi_sio: Add support for Tactrix OpenPort devices This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25 13:19:19 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
USB: ftdi_sio: adds vendor/product id for a RFID construction kit Adds the vendor and prodcut id for a RFID construction kit from the Elektor Electronics magazine, september 2006. From: Kjell Myksvoll <kmyksvo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-22 21:26:42 +00:00
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
USB: ftdi_sio: Adding VID and PID for Tellstick I would like to add the VID and PID for Telldus Technologies Homeautomation usb-dongle to the ftdi_sio driver. From: Micke Prag <micke.prag@telldus.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-04 22:39:11 +00:00
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
USB: FTDI: Add support for the RT System VX-7 radio programming cable RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-21 13:39:22 +00:00
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable Another variant of the RT Systems programming cable for ham radios. Signed-off-by: Michael Stuermer <ms@mallorn.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-17 23:45:43 +00:00
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
USB: New device PID for ftdi_sio driver Hello, I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for usb2serial communication, here are the patches for handling Maxstream's modules. The VID & PID to use with the open-source driver are provided on the CD-ROM bundled with the modules. From: Neil Superna ARMSTRONG <superna@na-prod.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-25 18:34:28 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID 0403:e40b) Support for PHI Fisco USB to Serial data cable (FTDI FT232BM based). PHI Fisco cable is supplied for connecting Philips Xenium 9@9++ mobile phones. PIDs were missing. Tested successfully with PHI Fisco Data Cable (VID/PID 0403:e40b) Signed-off-by: Lex V. Ross <lross@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-06 12:25:08 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
USB: ftdi_sio: add of a new product/manufacturer, TML I have added to a new product based on the FTDI 232R USB/Serial transceiver, which is commercialized by The Mobility Lab. Here is a trivial patch enclosed, against 2.6.22.6 kernel. Signed-off-by: Pierre Castella <pp.castella@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-06 20:34:39 +00:00
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
USB: ftdi driver - add support for optical probe device Added support for the Elster Unicom III Optical Probe. The device ID has already been added to the usb.ids file. Cc: stable <stable@kernel.org> Signed-off-by: Ed Beroset <beroset@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-17 22:37:46 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
USB: new ftdi_sio device id Here is a patch that adds support for the propox jtagcable II dongle (http://www.propox.com/products/t_117.html): their PID was missing, therefore we were not able to have the device recognized though it uses a standard FTDI chip. Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 10:38:55 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
usb: ftdi_sio: add PID for Propox ISPcable III Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-30 16:01:04 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
USB: ftdi_sio: Support for more JTAG adaptors [PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-01 14:08:35 +00:00
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: serial: ftdi_sio: adding support for OLIMEX ARM-USB-OCD-H Adding support for the OLIMEX ARM-USB-OCD-H JTAG device (id 15ba:002b) based on FTDI FT2232H Signed-off-by: JF Argentino <jf.argentino@free.fr> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09 21:13:20 +00:00
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: ftdi_sio: Support for more JTAG adaptors [PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-01 14:08:35 +00:00
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: ftdi_sio: add support for Luminance Stellaris Evaluation/Development Kits The Patch adds support for Luminance Stellaris Evaluation/Development Kits (FTDI 2232C based). The PIDs were missing. Successfully tested with a Stellaris LM3S8962 Evaluation kit. Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-30 14:53:41 +00:00
{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: Peter Stuge <peter@stuge.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 01:34:54 +00:00
{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-09 23:06:23 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
usb-serial: Use ftdi_sio driver for RATOC REX-USB60F This patch reverts 57833ea6b95a3995149f1f6d1a8d8862ab7a0ba2 ("usb-serial: pl2303: add support for RATOC REX-USB60F") and adds support for the device to ftdi_sio driver. Cc: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Cc: stable <stable@kernel.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-16 15:13:56 +00:00
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
USB: New device ID for ftdi_sio driver Here's a new device ID for the ftdio_sio driver. The diff is with linus's tree as of this morning. The device is the RigExpert Tiny USB Soundcard Transceiver Interface for ham radio. (I didn't actually test this. A fellow ham couldn't get the device to work, and I suggested binding the device ID using sysfs - see "http://jk.ufisa.uninett.no/usb/". However, he had had moved on to other things by then. I guess adding the device ID to the kernel "on spec" won't hurt. The relevant part of cat /proc/bus/usb/devices shows: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=ed22 Rev= 5.00 S: Manufacturer=FTDI S: Product=MixW RigExpert Tiny S: SerialNumber=00000000 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ) From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-24 09:43:13 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
USB: ftdi_sio: new VID/PIDs for various Papouch devices This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together. Signed-off-by: Daniel Suchy <danny@danysek.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 13:44:24 +00:00
/* Papouch devices based on FTDI chip */
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-16 13:46:50 +00:00
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
USB: ftdi_sio: new VID/PIDs for various Papouch devices This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together. Signed-off-by: Daniel Suchy <danny@danysek.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 13:44:24 +00:00
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
USB: ftdi_sio: new device id for papouch AD4USB added new device pid (PAPOUCH_AD4USB_PID) to ftdi_sio.h and ftdi_sio.c AD4USB measuring converter is a 4-input A/D converter which enables the user to measure to four current inputs ranging from 0(4) to 20 mA or voltage between 0 and 10 V. The measured values are then transferred to a superior system in digital form. The AD4USB communicates via USB. Powered is also via USB. datasheet in english is here: http://www.papouch.com/shop/scripts/pdf/ad4usb_en.pdf Signed-off-by: Radek Liboska <liboska@uochb.cas.cz>
2010-01-27 14:38:34 +00:00
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
USB: ftdi_sio: new VID/PIDs for various Papouch devices This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together. Signed-off-by: Daniel Suchy <danny@danysek.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 13:44:24 +00:00
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
usb: ftdi_sio: add support for Domintell devices Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier <gcpatch@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-22 22:00:09 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-12 23:05:59 +00:00
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
USB: ftdi_sio driver support of bar code scanner from Diebold Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: Mhayk Whandson <eu@mhayk.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-09 10:48:16 +00:00
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
USB: serial: add FTDI USB/Serial converter devices Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-05 22:09:22 +00:00
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-06 22:07:43 +00:00
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: serial: ftdi: handle gnICE+ JTAG adaptors Detect the UART on interface1 and blacklist interface0 (as that is the JTAG port). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-14 14:39:53 +00:00
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: ftdi_sio: add vendor/project id for JETI specbos 1201 spectrometer Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25 10:32:59 +00:00
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug For reference: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24 02:38:12 +00:00
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: FTDI-SIO new device ids I would like to have added new device to usbserial/ftdi_sio driver. These ids used USB track device (http://www.l-and-b.dk/access_alt.html). They use differend device IDs, but it works as standard usb-serial conventer. From: Daniel Suchy <danny@danysek.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-13 08:05:48 +00:00
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
USB: ftdi_sio: Add support for GN Otometrics Aurical USB Audiometer The patch adds support for the GN Otometrics Aurical USB Audiometer (FT232BM-based). A new VID and a new PID is added. Signed-off-by: Ville Sundberg <vsundber@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-14 21:27:28 +00:00
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable Attached patch adds USB vendor and product IDs for Bayer's USB to serial converter cable used by Bayer blood glucose meters. It seems to be a FT232RL based device and works without any problem with ftdi_sio driver when this patch is applied. See: http://winglucofacts.com/cables/ Signed-off-by: Marko Hänninen <bugitus@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-31 19:32:39 +00:00
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client reference: http://www.open-rd.org Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 11:56:49 +00:00
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: serial: ftdi_sio: new hardware support - hameg power supply I'd like to present my small patch enabling to use Hameg HM8143 programmable power supply with linux. Signed-off-by: Pawel Ludwikow <pludwiko@rab.ict.pwr.wroc.pl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-27 12:15:50 +00:00
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
USB: ftdi_sio: add ids for Hameg HO720 and HO730 usb serial: ftdi_sio: add two missing USB ID's for Hameg interfaces HO720 and HO730 Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-18 10:13:55 +00:00
{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
USB: serial: ftdi_sio: new hardware support - hameg power supply I'd like to present my small patch enabling to use Hameg HM8143 programmable power supply with linux. Signed-off-by: Pawel Ludwikow <pludwiko@rab.ict.pwr.wroc.pl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-27 12:15:50 +00:00
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
USB: add new ftdi_sio device ids PID patch for my products Signed-off-by: Mitchell Solomon <mitchjs@rush2112.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-12 18:23:18 +00:00
{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
USB: ftdi_sio: support for Signalyzer tools based on FTDI chips ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-01 08:49:55 +00:00
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: serial: enabling support for Segway RMP in ftdi_sio I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module. Signed-off-by: John Rogers <jgrogers@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-24 13:50:52 +00:00
{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
USB: ftdi_sio: Add PID for accesio products Adds support for Accesio USB to Serial adapters, which are built around FTDI FT232 UARTs. Tested with the Accesio USB-COM-4SM. Signed-off-by: Rich Mattes <richmattes@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 04:35:40 +00:00
{ USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
USB: ftdi_sio: Add ID for Ionics PlugComputer Add the ID for the Ionics PlugComputer (<http://ionicsplug.com/>). Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 19:31:21 +00:00
{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: ftdi_sio: Added custom PIDs for ChamSys products Added the 0xDAF8 to 0xDAFF PID range for ChamSys limited USB interface/wing products Signed-off-by: Luke Lowrey <luke@chamsys.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-02 10:39:49 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
USB: ftdi_sio: add device ids for ScienceScope This adds the requested device ids to the ftdi_sio driver. Reported-by: Ewan Bingham <ewan@auc.co.uk> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-19 16:05:43 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
USB: ftdi_sio: Add D.O.Tec PID Add FTDI PID to identify D.O.Tec devices correctly. Signed-off-by: Florian Faber <faberman@linuxproaudio.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-01 09:11:08 +00:00
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter (http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/) to the ftdi_sio driver and disable the first serial channel (used as JTAG from userspace). Signed-off-by: Sebastien Bourdeauducq <sebastien@milkymist.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-03 10:54:12 +00:00
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
USB: ftdi_sio: add ST Micro Connect Lite uart support on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-29 14:32:52 +00:00
{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
[PATCH] USB ftdi_sio: user specified VID/PID ftdi_sio: Support one user specified vendor and product ID via a couple of new module parameters. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-28 17:40:32 +00:00
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
MODULE_DEVICE_TABLE(usb, id_table_combined);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static struct usb_driver ftdi_driver = {
.name = "ftdi_sio",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table_combined,
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
.no_dynamic_id = 1,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
[PATCH] USB: mark various usb tables const patch below marks various USB tables and variables as const so that they end up in .rodata section and don't cacheline share with things that get written to. For the non-array variables it also allows gcc to optimize more. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-29 08:43:42 +00:00
static const char *ftdi_chip_name[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SIO] = "SIO", /* the serial part of FT8U100AX */
[FT8U232AM] = "FT8U232AM",
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
USB: Product ID for FT232RL in ftdi_sio Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-04 23:03:26 +00:00
[FT232RL] = "FT232RL",
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
[FT2232H] = "FT2232H",
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
[FT4232H] = "FT4232H",
[FT232H] = "FT232H"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
};
/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
/* End TIOCMIWAIT */
USB: ftdi_sio.c add missing '|' add missing '|' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-07 00:06:07 +00:00
#define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \
| ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* function prototypes for a FTDI serial converter */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
tty: USB does not need the filp argument in the drivers And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 20:13:26 +00:00
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 11:26:29 +00:00
static void ftdi_close(struct usb_serial_port *port);
static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
USB: ftdi_sio: switch to generic read implementation Switch to generic read implementation and use process_read_urb to do device specific processing (handle line status). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:00 +00:00
static void ftdi_process_read_urb(struct urb *urb);
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
void *dest, size_t size);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
tiocmget: kill off the passing of the struct file We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 16:26:14 +00:00
static int ftdi_tiocmget(struct tty_struct *tty);
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 16:26:50 +00:00
static int ftdi_tiocmset(struct tty_struct *tty,
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
unsigned int set, unsigned int clear);
USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:08 +00:00
static int ftdi_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
tty: remove filp from the USB tty ioctls We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 16:27:06 +00:00
static int ftdi_ioctl(struct tty_struct *tty,
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor(int baud);
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_2232h_baud_to_divisor(int baud);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB Serial: rename usb_serial_device_type to usb_serial_driver I'm tired of trying to explain why a "device_type" is really a driver. This better describes exactly what this structure is. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 04:15:16 +00:00
static struct usb_serial_driver ftdi_sio_device = {
[PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 04:15:16 +00:00
.driver = {
.owner = THIS_MODULE,
[PATCH] USB Serial: move name to driver structure This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 04:15:16 +00:00
.name = "ftdi_sio",
[PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 04:15:16 +00:00
},
[PATCH] USB Serial: move name to driver structure This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 04:15:16 +00:00
.description = "FTDI USB Serial Device",
USB: ftdi_sio: correct spelling in implementation file - correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:57 +00:00
.usb_driver = &ftdi_driver,
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
.id_table = id_table_combined,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.num_ports = 1,
USB: serial: allow drivers to define bulk buffer sizes Allow drivers to define custom bulk in/out buffer sizes in struct usb_serial_driver. If not set, fall back to the default buffer size which matches the endpoint size. Three drivers are currently freeing the pre-allocated buffers and allocating larger ones to achieve this at port probe (ftdi_sio) or even at port open (ipaq and iuu_phoenix), which needless to say is suboptimal. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:00:37 +00:00
.bulk_in_size = 512,
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
.bulk_out_size = 256,
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
.probe = ftdi_sio_probe,
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
.port_probe = ftdi_sio_port_probe,
.port_remove = ftdi_sio_port_remove,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.open = ftdi_open,
.close = ftdi_close,
tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 11:26:29 +00:00
.dtr_rts = ftdi_dtr_rts,
USB: ftdi_sio: switch to generic read implementation Switch to generic read implementation and use process_read_urb to do device specific processing (handle line status). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:00 +00:00
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.process_read_urb = ftdi_process_read_urb,
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
.prepare_write_buffer = ftdi_prepare_write_buffer,
USB: ftdi_sio: correct spelling in implementation file - correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:57 +00:00
.tiocmget = ftdi_tiocmget,
.tiocmset = ftdi_tiocmset,
USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:08 +00:00
.get_icount = ftdi_get_icount,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
};
#define WDR_TIMEOUT 5000 /* default urb timeout */
[PATCH] USB: ftdi_sio: fix a couple of timeouts ftdi_sio: Fix timeouts in a couple of usb_control_msg() calls due to change of units from jiffies to milliseconds in 2.6.12. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:52 +00:00
#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* High and low are for DTR, RTS etc etc */
#define HIGH 1
#define LOW 0
/*
* ***************************************************************************
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
* Utility functions
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* ***************************************************************************
*/
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
unsigned short int divisor;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* divisor shifted 3 bits to the left */
int divisor3 = base / 2 / baud;
if ((divisor3 & 0x7) == 7)
divisor3++; /* round x.7/8 up to x+1 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
divisor = divisor3 >> 3;
divisor3 &= 0x7;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (divisor3 == 1)
divisor |= 0xc000;
else if (divisor3 >= 4)
divisor |= 0x4000;
else if (divisor3 != 0)
divisor |= 0x8000;
else if (divisor == 1)
divisor = 0; /* special case for maximum baud rate */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return divisor;
}
static unsigned short int ftdi_232am_baud_to_divisor(int baud)
{
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
return ftdi_232am_baud_base_to_divisor(baud, 48000000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
__u32 divisor;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* divisor shifted 3 bits to the left */
int divisor3 = base / 2 / baud;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
divisor = divisor3 >> 3;
divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (divisor == 1)
divisor = 0;
else if (divisor == 0x4001)
divisor = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return divisor;
}
static __u32 ftdi_232bm_baud_to_divisor(int baud)
{
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
__u32 divisor;
int divisor3;
/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
USB: ftdi_sio: fix resolution of 2232H baud rate dividers The 2232H high speed baud rates also support fractional baud rate divisors, but when the performing the divisions before the multiplication, the fractional bits are lost. Signed-off-by: Daniel Glöckner <dg@emlix.com> Acked-by: Mark Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-10 23:42:14 +00:00
divisor3 = base * 8 / (baud * 10);
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
divisor = divisor3 >> 3;
divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1)
divisor = 0;
else if (divisor == 0x4001)
divisor = 1;
/*
* Set this bit to turn off a divide by 2.5 on baud rate generator
* This enables baud rates up to 12Mbaud but cannot reach below 1200
* baud with this bit set
*/
divisor |= 0x00020000;
return divisor;
}
static __u32 ftdi_2232h_baud_to_divisor(int baud)
{
return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
}
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static int update_mctrl(struct usb_serial_port *port, unsigned int set,
unsigned int clear)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
unsigned urb_value;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int rv;
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s - DTR|RTS not being set|cleared", __func__);
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
return 0; /* no change */
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
clear &= ~set; /* 'set' takes precedence over 'clear' */
urb_value = 0;
if (clear & TIOCM_DTR)
urb_value |= FTDI_SIO_SET_DTR_LOW;
if (clear & TIOCM_RTS)
urb_value |= FTDI_SIO_SET_RTS_LOW;
if (set & TIOCM_DTR)
urb_value |= FTDI_SIO_SET_DTR_HIGH;
if (set & TIOCM_RTS)
urb_value |= FTDI_SIO_SET_RTS_HIGH;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
urb_value, priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT);
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
if (rv < 0) {
ftdi: A few errors are err() that should be debug which causes much spewage Fixes #10783 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 09:36:00 +00:00
dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
__func__,
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" :
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
} else {
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s - DTR %s, RTS %s", __func__,
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" :
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
USB: ftdi_sio: Note missing locking The ftdi_sio driver has no internal locking on the dtr/rts state. Flag that up for someone to fix. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 20:49:53 +00:00
/* FIXME: locking on last_dtr_rts */
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return rv;
}
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static __u32 get_ftdi_divisor(struct tty_struct *tty,
struct usb_serial_port *port)
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
__u32 div_value = 0;
int div_okay = 1;
int baud;
/*
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* The logic involved in setting the baudrate can be cleanly split into
* 3 steps.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* 1. Standard baud rates are set in tty->termios->c_cflag
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* 2. If these are not enough, you can set any speed using alt_speed as
* follows:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* - set tty->termios->c_cflag speed to B38400
* - set your real speed in tty->alt_speed; it gets ignored when
* alt_speed==0, (or)
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as
* follows:
* flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
* this just sets alt_speed to (HI: 57600, VHI: 115200,
* SHI: 230400, WARP: 460800)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* ** Steps 1, 2 are done courtesy of tty_get_baud_rate
* 3. You can also set baud rate by setting custom divisor as follows
* - set tty->termios->c_cflag speed to B38400
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as
* follows:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
* o custom_divisor set to baud_base / your_new_baudrate
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* ** Step 3 is done courtesy of code borrowed from serial.c
* I should really spend some time and separate + move this common
* code to serial.c, it is replicated in nearly every serial driver
* you see.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* 1. Get the baud rate from the tty settings, this observes
alt_speed hack */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
baud = tty_get_baud_rate(tty);
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* 2. Observe async-compatible custom_divisor hack, update baudrate
if needed */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (baud == 38400 &&
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(priv->custom_divisor)) {
baud = priv->baud_base / priv->custom_divisor;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s - custom divisor %d sets baud rate to %d",
__func__, priv->custom_divisor, baud);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* 3. Convert baudrate to device-specific divisor */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (!baud)
baud = 9600;
switch (priv->chip_type) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case SIO: /* SIO chip */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
switch (baud) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case 300: div_value = ftdi_sio_b300; break;
case 600: div_value = ftdi_sio_b600; break;
case 1200: div_value = ftdi_sio_b1200; break;
case 2400: div_value = ftdi_sio_b2400; break;
case 4800: div_value = ftdi_sio_b4800; break;
case 9600: div_value = ftdi_sio_b9600; break;
case 19200: div_value = ftdi_sio_b19200; break;
case 38400: div_value = ftdi_sio_b38400; break;
case 57600: div_value = ftdi_sio_b57600; break;
case 115200: div_value = ftdi_sio_b115200; break;
} /* baud */
if (div_value == 0) {
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s - Baudrate (%d) requested is not supported",
__func__, baud);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
div_value = ftdi_sio_b9600;
USB: ftd_sio cleanups and updates for new termios work checkpatch fixes WARNING: line over 80 characters #23: FILE: drivers/usb/serial/ftdi_sio.c:297: + speed_t force_baud; /* if non-zero, force the baud rate to this value */ ERROR: use tabs not spaces #31: FILE: drivers/usb/serial/ftdi_sio.c:881: +^I$ ERROR: use tabs not spaces #39: FILE: drivers/usb/serial/ftdi_sio.c:890: +^I$ WARNING: line over 80 characters #111: FILE: drivers/usb/serial/ftdi_sio.c:1956: + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:25 +00:00
baud = 9600;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
div_okay = 0;
}
break;
case FT8U232AM: /* 8U232AM chip */
if (baud <= 3000000) {
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s - Baud rate too high!", __func__);
USB: ftd_sio cleanups and updates for new termios work checkpatch fixes WARNING: line over 80 characters #23: FILE: drivers/usb/serial/ftdi_sio.c:297: + speed_t force_baud; /* if non-zero, force the baud rate to this value */ ERROR: use tabs not spaces #31: FILE: drivers/usb/serial/ftdi_sio.c:881: +^I$ ERROR: use tabs not spaces #39: FILE: drivers/usb/serial/ftdi_sio.c:890: +^I$ WARNING: line over 80 characters #111: FILE: drivers/usb/serial/ftdi_sio.c:1956: + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:25 +00:00
baud = 9600;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
div_value = ftdi_232am_baud_to_divisor(9600);
div_okay = 0;
}
break;
case FT232BM: /* FT232BM chip */
case FT2232C: /* FT2232C chip */
USB: fix usb-serial/ftdi build warning Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-23 19:54:27 +00:00
case FT232RL:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (baud <= 3000000) {
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
__u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
if (((FTDI_NDI_HUC_PID == product_id) ||
(FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
(FTDI_NDI_FUTURE_2_PID == product_id) ||
(FTDI_NDI_FUTURE_3_PID == product_id) ||
(FTDI_NDI_AURORA_SCU_PID == product_id)) &&
(baud == 19200)) {
baud = 1200000;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s - Baud rate too high!", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
baud = 9600;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
break;
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
case FT2232H: /* FT2232H chip */
case FT4232H: /* FT4232H chip */
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
case FT232H: /* FT232H chip */
USB: ftdi_sio: fix minor typo in get_ftdi_divisor Even if it's unlikely for this to cause an error, there is a typo in the code that uses the bitwise-AND operator instead of the logical one. Signed-off-by: Ionut Nicu <ionut.nicu@cloudbit.ro> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-11 13:46:12 +00:00
if ((baud <= 12000000) && (baud >= 1200)) {
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
div_value = ftdi_2232h_baud_to_divisor(baud);
} else if (baud < 1200) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
baud = 9600;
}
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} /* priv->chip_type */
if (div_okay) {
dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
__func__, baud, (unsigned long)div_value,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_chip_name[priv->chip_type]);
}
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty_encode_baud_rate(tty, baud, baud);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
return div_value;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
__u16 urb_value;
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
__u16 urb_index;
__u32 urb_index_value;
int rv;
urb_index_value = get_ftdi_divisor(tty, port);
urb_value = (__u16)urb_index_value;
urb_index = (__u16)(urb_index_value >> 16);
usb: serial: ftdi_sio.c: For the FT232H FTDI_SIO_SET_BAUDRATE_REQUEST, index needs to be shifted too the recent addition of the FT232H showed that baudrate was set wrong. See gmane.linux.usb.general: "[ftdi_sio] FT232H support". With the old code, the MSB of the 4 encoded fractional divider bits and more important the clock predivider bits got lost. Adding the FT232H to the code patch were these bits are shifted solves the problem. I verified baud rates with a scope now. I suspect, that the BM device probably needs these bits shifted too. But there is no predivider bit, so this is not obvious, and a missing MSB of the encoded fractional divider only shifts the resulting baudrate minimal. The AM has only 3 bits of encoded fractional divider, so it is not impacted. I have no BM device to test, so I only added a comment and left the code for the BM untouched. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-22 08:41:15 +00:00
if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) ||
(priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) {
/* Probably the BM type needs the MSB of the encoded fractional
* divider also moved like for the chips above. Any infos? */
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
urb_index = (__u16)((urb_index << 8) | priv->interface);
}
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_SHORT_TIMEOUT);
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
return rv;
}
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
static int write_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
int rv;
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
int l = priv->latency;
if (priv->flags & ASYNC_LOW_LATENCY)
l = 1;
dbg("%s: setting latency timer = %i", __func__, l);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
l, priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT);
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
if (rv < 0)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
return rv;
}
static int read_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
USB: ftdi_sio: fix latency-timeout endianess bug Also fixes DMA transfer to stack for latency buffer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:08 +00:00
unsigned char *buf;
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
int rv;
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
dbg("%s", __func__);
USB: ftdi_sio: fix latency-timeout endianess bug Also fixes DMA transfer to stack for latency buffer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:08 +00:00
buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
rv = usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
0, priv->interface,
USB: ftdi_sio: fix latency-timeout endianess bug Also fixes DMA transfer to stack for latency buffer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:08 +00:00
buf, 1, WDR_TIMEOUT);
USB: ftdi_sio: use error code from usb stack in read_latency_timer Use same semantics as for write_latency_timer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:07 +00:00
if (rv < 0)
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
USB: ftdi_sio: use error code from usb stack in read_latency_timer Use same semantics as for write_latency_timer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:07 +00:00
else
USB: ftdi_sio: fix latency-timeout endianess bug Also fixes DMA transfer to stack for latency buffer. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:08 +00:00
priv->latency = buf[0];
kfree(buf);
USB: ftdi_sio: fix initialisation of latency timeout Latency timeout was read but never stored on port probe. When ASYNC_LOW_LATENCY was cleared the device timeout would get set to 0 rather than the default 16ms. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-22 20:25:20 +00:00
return rv;
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct tmp;
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.flags = priv->flags;
tmp.baud_base = priv->baud_base;
tmp.custom_divisor = priv->custom_divisor;
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
static int set_serial_info(struct tty_struct *tty,
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
struct usb_serial_port *port, struct serial_struct __user *newinfo)
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct new_serial;
struct ftdi_private old_priv;
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
tty: Drop the lock_kernel in the private ioctl hook We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 13:48:56 +00:00
USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-02 15:18:28 +00:00
mutex_lock(&priv->cfg_lock);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
old_priv = *priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Do error checking and permission checking */
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
USB: ftdi_sio: unlock_kernel() on error in set_serial_info() There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-03 08:11:38 +00:00
(priv->flags & ~ASYNC_USR_MASK))) {
USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-02 15:18:28 +00:00
mutex_unlock(&priv->cfg_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EPERM;
USB: ftdi_sio: unlock_kernel() on error in set_serial_info() There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-03 08:11:38 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
priv->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
if ((new_serial.baud_base != priv->baud_base) &&
tty: Drop the lock_kernel in the private ioctl hook We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 13:48:56 +00:00
(new_serial.baud_base < 9600)) {
USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-02 15:18:28 +00:00
mutex_unlock(&priv->cfg_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EINVAL;
tty: Drop the lock_kernel in the private ioctl hook We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 13:48:56 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Make the changes - these are privileged changes! */
priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
(new_serial.flags & ASYNC_FLAGS));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->custom_divisor = new_serial.custom_divisor;
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
write_latency_timer(port);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) {
if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty->alt_speed = 57600;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty->alt_speed = 115200;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty->alt_speed = 230400;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty->alt_speed = 460800;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty->alt_speed = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
if (((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) ||
(((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(old_priv.custom_divisor != priv->custom_divisor))) {
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
change_speed(tty, port);
USB: ftdi_sio: Fix locking for change_speed() function The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-13 17:35:14 +00:00
mutex_unlock(&priv->cfg_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
tty: Drop the lock_kernel in the private ioctl hook We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 13:48:56 +00:00
else
USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-02 15:18:28 +00:00
mutex_unlock(&priv->cfg_lock);
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
return 0;
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: serial: ftdi_sio: add support for TIOCSERGETLSR Willem-Jan noticed that the ftdi_sio driver did not support the TIOCSERGETLSR ioctl, and some userspace programs rely on it. This patch adds the support. Reported-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Tested-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 21:40:42 +00:00
static int get_lsr_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned int result = 0;
if (!retinfo)
return -EFAULT;
if (priv->transmit_empty)
result = TIOCSER_TEMT;
if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
return -EFAULT;
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* Determine type of FTDI chip based on USB config and descriptor. */
static void ftdi_determine_type(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct usb_device *udev = serial->dev;
unsigned version;
unsigned interfaces;
/* Assume it is not the original SIO device for now. */
[PATCH] USB: ftdi_sio: custom baud rate fix ftdi_sio: I messed up the baud_base for custom baud rate support in 2.6.13. The attached one-liner patch fixes it. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12 11:23:25 +00:00
priv->baud_base = 48000000 / 2;
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
version = le16_to_cpu(udev->descriptor.bcdDevice);
interfaces = udev->actconfig->desc.bNumInterfaces;
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
version, interfaces);
if (interfaces > 1) {
int inter;
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
/* Multiple interfaces.*/
if (version == 0x0800) {
priv->chip_type = FT4232H;
/* Hi-speed - baud clock runs at 120MHz */
priv->baud_base = 120000000 / 2;
} else if (version == 0x0700) {
priv->chip_type = FT2232H;
/* Hi-speed - baud clock runs at 120MHz */
priv->baud_base = 120000000 / 2;
} else
priv->chip_type = FT2232C;
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* Determine interface code. */
inter = serial->interface->altsetting->desc.bInterfaceNumber;
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
if (inter == 0) {
priv->interface = INTERFACE_A;
} else if (inter == 1) {
priv->interface = INTERFACE_B;
} else if (inter == 2) {
priv->interface = INTERFACE_C;
} else if (inter == 3) {
priv->interface = INTERFACE_D;
}
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
dbg("%s: something fishy - bcdDevice too low for multi-interface device",
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
__func__);
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
}
} else if (version < 0x200) {
USB: ftdi_sio: correct spelling in implementation file - correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:57 +00:00
/* Old device. Assume it's the original SIO. */
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
} else if (version < 0x400) {
USB: ftdi_sio: correct spelling in implementation file - correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:57 +00:00
/* Assume it's an FT8U232AM (or FT8U245AM) */
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* (It might be a BM because of the iSerialNumber bug,
* but it will still work as an AM device.) */
priv->chip_type = FT8U232AM;
USB: fix usb-serial/ftdi build warning Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-23 19:54:27 +00:00
} else if (version < 0x600) {
USB: ftdi_sio: correct spelling in implementation file - correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-17 10:45:57 +00:00
/* Assume it's an FT232BM (or FT245BM) */
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
priv->chip_type = FT232BM;
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
} else if (version < 0x900) {
/* Assume it's an FT232RL */
USB: fix usb-serial/ftdi build warning Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-23 19:54:27 +00:00
priv->chip_type = FT232RL;
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
} else {
/* Assume it's an FT232H */
priv->chip_type = FT232H;
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
}
USB: remove info() macro from usb/serial drivers USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-18 20:21:04 +00:00
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
}
USB: ftdi_sio: fix hi-speed device packet size calculation Added a function to set the packet size to be used based on the value from the device endpoint descriptor. The FT2232H and FT4232H hi-speed devices will have wMaxPacketSize of 512 bytes when connected to a USB 2.0 hi-speed host, but will use alternative descriptors with wMaxPacketSize of 64 bytes if connected to a USB 1.1 host or hub. All other FTDI devices have wMaxPacketSize of 64 bytes, except some FT232R and FT245R devices which customers have mistakenly programmed to have wMaxPacketSize of 0 - this is an error and will be overridden to use wMaxPacketSize of 64 bytes. The packet size used is important as it determines where the driver removes the status bytes from the incoming data. If it is incorrect, it will lead to data corruption. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-01 10:48:45 +00:00
/* Determine the maximum packet size for the device. This depends on the chip
* type and the USB host capabilities. The value should be obtained from the
* device descriptor as the chip will use the appropriate values for the host.*/
static void ftdi_set_max_packet_size(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
unsigned num_endpoints;
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
int i;
USB: ftdi_sio: fix hi-speed device packet size calculation Added a function to set the packet size to be used based on the value from the device endpoint descriptor. The FT2232H and FT4232H hi-speed devices will have wMaxPacketSize of 512 bytes when connected to a USB 2.0 hi-speed host, but will use alternative descriptors with wMaxPacketSize of 64 bytes if connected to a USB 1.1 host or hub. All other FTDI devices have wMaxPacketSize of 64 bytes, except some FT232R and FT245R devices which customers have mistakenly programmed to have wMaxPacketSize of 0 - this is an error and will be overridden to use wMaxPacketSize of 64 bytes. The packet size used is important as it determines where the driver removes the status bytes from the incoming data. If it is incorrect, it will lead to data corruption. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-01 10:48:45 +00:00
num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
/* NOTE: some customers have programmed FT232R/FT245R devices
* with an endpoint size of 0 - not good. In this case, we
* want to override the endpoint descriptor setting and use a
* value of 64 for wMaxPacketSize */
for (i = 0; i < num_endpoints; i++) {
dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
ep_desc = &interface->cur_altsetting->endpoint[i].desc;
if (ep_desc->wMaxPacketSize == 0) {
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
}
}
/* set max packet size based on descriptor */
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:12:03 +00:00
priv->max_packet_size = usb_endpoint_maxp(ep_desc);
USB: ftdi_sio: fix hi-speed device packet size calculation Added a function to set the packet size to be used based on the value from the device endpoint descriptor. The FT2232H and FT4232H hi-speed devices will have wMaxPacketSize of 512 bytes when connected to a USB 2.0 hi-speed host, but will use alternative descriptors with wMaxPacketSize of 64 bytes if connected to a USB 1.1 host or hub. All other FTDI devices have wMaxPacketSize of 64 bytes, except some FT232R and FT245R devices which customers have mistakenly programmed to have wMaxPacketSize of 0 - this is an error and will be overridden to use wMaxPacketSize of 64 bytes. The packet size used is important as it determines where the driver removes the status bytes from the incoming data. If it is incorrect, it will lead to data corruption. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-01 10:48:45 +00:00
dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* ***************************************************************************
* Sysfs Attribute
* ***************************************************************************
*/
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static ssize_t show_latency_timer(struct device *dev,
struct device_attribute *attr, char *buf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
if (priv->flags & ASYNC_LOW_LATENCY)
return sprintf(buf, "1\n");
else
return sprintf(buf, "%i\n", priv->latency);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Write a new value of the latency timer, in units of milliseconds. */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static ssize_t store_latency_timer(struct device *dev,
struct device_attribute *attr, const char *valbuf,
size_t count)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int v = simple_strtoul(valbuf, NULL, 10);
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
int rv;
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 12:55:34 +00:00
priv->latency = v;
rv = write_latency_timer(port);
if (rv < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -EIO;
return count;
}
/* Write an event character directly to the FTDI register. The ASCII
value is in the low 8 bits, with the enable bit in the 9th bit. */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static ssize_t store_event_char(struct device *dev,
struct device_attribute *attr, const char *valbuf, size_t count)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
struct usb_device *udev = port->serial->dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int v = simple_strtoul(valbuf, NULL, 10);
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
int rv;
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s: setting event char = %i", __func__, v);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
v, priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (rv < 0) {
dbg("Unable to write event character: %i", rv);
return -EIO;
}
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return count;
}
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
store_latency_timer);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
static int create_sysfs_attrs(struct usb_serial_port *port)
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
{
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
int retval = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s", __func__);
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
retval = device_create_file(&port->dev, &dev_attr_event_char);
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
if ((!retval) &&
USB: ftdi_sio.c: Allow setting latency timer on FT232RL The new FT232RL allows setting and getting the value of the latency timer, like on the FT232BM. However, the driver will not create the sysfs entries for the RL without this one-line patch. I have tested it on two systems with successful results. From: Stepan Moskovchenko <stevenm86@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-09 18:53:04 +00:00
(priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
priv->chip_type == FT4232H ||
priv->chip_type == FT232H)) {
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
retval = device_create_file(&port->dev,
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
&dev_attr_latency_timer);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
return retval;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
static void remove_sysfs_attrs(struct usb_serial_port *port)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
device_remove_file(&port->dev, &dev_attr_event_char);
USB: ftdi_sio: Handle FT232RL devices like FT232BM devices Handle the FT232RL device type in exactly the same way as FT232BM devices (FT232RL detection was added around kernel 2.6.20 but not code for handling it). Signed-off-by: Andrew M. Bishop <amb@gedanken.demon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-21 18:08:56 +00:00
if (priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
priv->chip_type == FT4232H ||
priv->chip_type == FT232H) {
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
device_remove_file(&port->dev, &dev_attr_latency_timer);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* ***************************************************************************
* FTDI driver specific functions
* ***************************************************************************
*/
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* Probe function to check for special devices */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id)
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
struct ftdi_sio_quirk *quirk =
(struct ftdi_sio_quirk *)id->driver_info;
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
if (quirk && quirk->probe) {
int ret = quirk->probe(serial);
if (ret != 0)
return ret;
}
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
usb_set_serial_data(serial, (void *)id->driver_info);
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
return 0;
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
}
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
static int ftdi_sio_port_probe(struct usb_serial_port *port)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
struct ftdi_private *priv;
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
USB: fix __must_check warnings in drivers/usb/serial/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 18:43:25 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB: kzalloc() conversion for rest of drivers/usb Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-27 20:29:43 +00:00
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (!priv) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
sizeof(struct ftdi_private));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return -ENOMEM;
}
usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 14:06:19 +00:00
kref_init(&priv->kref);
USB: ftdi_sio: Replace BKL with a mutex As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-02 15:18:28 +00:00
mutex_init(&priv->cfg_lock);
USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:08 +00:00
memset(&priv->icount, 0x00, sizeof(priv->icount));
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
init_waitqueue_head(&priv->delta_msr_wait);
USB: ftdi_sio: remove obsolete comment We always push characters to ldisc immediately regardless of ASYNC_LOW_LATENCY. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-22 16:25:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->flags = ASYNC_LOW_LATENCY;
USB: ftdi_sio: fix oops due to processing workarounds too early Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-09 19:03:08 +00:00
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
priv->port = port;
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
usb_set_serial_port_data(port, priv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
ftdi_determine_type(port);
USB: ftdi_sio: fix hi-speed device packet size calculation Added a function to set the packet size to be used based on the value from the device endpoint descriptor. The FT2232H and FT4232H hi-speed devices will have wMaxPacketSize of 512 bytes when connected to a USB 2.0 hi-speed host, but will use alternative descriptors with wMaxPacketSize of 64 bytes if connected to a USB 1.1 host or hub. All other FTDI devices have wMaxPacketSize of 64 bytes, except some FT232R and FT245R devices which customers have mistakenly programmed to have wMaxPacketSize of 0 - this is an error and will be overridden to use wMaxPacketSize of 64 bytes. The packet size used is important as it determines where the driver removes the status bytes from the incoming data. If it is incorrect, it will lead to data corruption. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-01 10:48:45 +00:00
ftdi_set_max_packet_size(port);
USB: ftdi_sio: fix initialisation of latency timeout Latency timeout was read but never stored on port probe. When ASYNC_LOW_LATENCY was cleared the device timeout would get set to 0 rather than the default 16ms. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-22 20:25:20 +00:00
if (read_latency_timer(port) < 0)
priv->latency = 16;
USB: ftdi_sio: set device latency timeout at port probe No need to set latency timeout at every open. This also fixes an issue with the read latency being as high as 250ms (instead of 1ms) for the first read after port probe. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-11 18:23:36 +00:00
write_latency_timer(port);
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
create_sysfs_attrs(port);
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* Setup for the USB-UIRT device, which requires hardwired
* baudrate (38400 gets mapped to 312500) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Called from usbserial:serial_probe */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
priv->force_baud = 38400;
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
/* Setup for the HE-TIRA1 device, which requires hardwired
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
{
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
priv->force_baud = 38400;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->force_rtscts = 1;
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
/*
* Module parameter to control latency timer for NDI FTDI-based USB devices.
* If this value is not set in modprobe.conf.local its value will be set to 1ms.
*/
static int ndi_latency_timer = 1;
/* Setup for the NDI FTDI-based USB devices, which requires hardwired
* baudrate (19200 gets mapped to 1200000).
*
* Called from usbserial:serial_probe.
*/
static int ftdi_NDI_device_setup(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
int latency = ndi_latency_timer;
if (latency == 0)
latency = 1;
if (latency > 99)
latency = 99;
dbg("%s setting NDI device latency to %d", __func__, latency);
dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
/* FIXME: errors are not returned */
usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
latency, 0, NULL, 0, WDR_TIMEOUT);
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
return 0;
}
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
/*
USB: ftdi_sio: Support for more JTAG adaptors [PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-01 14:08:35 +00:00
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
* userspace using openocd.
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
*/
USB: ftdi_sio: Support for more JTAG adaptors [PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-01 14:08:35 +00:00
static int ftdi_jtag_probe(struct usb_serial *serial)
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
{
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s", __func__);
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
if (interface == udev->actconfig->interface[0]) {
USB: remove info() macro from usb/serial drivers USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-18 20:21:04 +00:00
dev_info(&udev->dev,
"Ignoring serial port reserved for JTAG\n");
USB: Add support for Olimex arm-usb-ocd JTAG interface serial port This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-05 01:23:24 +00:00
return -ENODEV;
}
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: add Calao reference board support Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25 09:46:58 +00:00
static int ftdi_8u2232c_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
dbg("%s", __func__);
if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
return ftdi_jtag_probe(serial);
return 0;
}
USB: ftdi_sio: add ST Micro Connect Lite uart support on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-29 14:32:52 +00:00
/*
* First and second port on STMCLiteadaptors is reserved for JTAG interface
* and the forth port for pio
*/
static int ftdi_stmclite_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
dbg("%s", __func__);
if (interface == udev->actconfig->interface[2])
return 0;
dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
return -ENODEV;
}
USB: ftdi_sio: Workaround for broken Matrix Orbital serial port Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-01 18:49:59 +00:00
/*
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
* We have to correct it if we want to read from it.
*/
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
{
struct usb_host_endpoint *ep = serial->dev->ep_in[1];
struct usb_endpoint_descriptor *ep_desc = &ep->desc;
if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
drivers/usb annotations and fixes * endianness annotations * endianness fixes * missing get_unaligned/put_unaligned It's pretty much all over the place, changes to different files are independent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Serial-parts-Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 06:00:16 +00:00
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
USB: remove info() macro from usb/serial drivers USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-18 20:21:04 +00:00
dev_info(&serial->dev->dev,
"Fixing invalid wMaxPacketSize on read pipe\n");
USB: ftdi_sio: Workaround for broken Matrix Orbital serial port Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-01 18:49:59 +00:00
}
return 0;
}
usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 14:06:19 +00:00
static void ftdi_sio_priv_release(struct kref *k)
{
struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
kfree(priv);
}
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
remove_sysfs_attrs(port);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Fix oops on close of hot-unplugged FTDI serial converter Commit c45d6320 ("fix reference counting of ftdi_private") stopped ftdi_sio_port_remove() from directly freeing the port-private data, with the intention if the port was still open, it would be freed when ftdi_close() is eventually called and releases the last refcount on the structure. That's all very well, but ftdi_sio_port_remove() still contains a call to usb_set_serial_port_data(port, NULL) -- so by the time we get to ftdi_close() for the port which was unplugged, it _still_ oopses on dereferencing that NULL pointer, as it did before (and does in 2.6.29). The fix is just not to clear the private data in ftdi_sio_port_remove(). Then the refcount is properly reduced to zero when the final kref_put() happens in ftdi_close(). Remove a bogus comment too, while we're at it. And stop doing things inside "if (priv)" -- it must _always_ be there. Based loosely on an earlier patch by Daniel Mack, and suggestions by Alan Stern. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-18 12:07:35 +00:00
kref_put(&priv->kref, ftdi_sio_priv_release);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-28 18:10:50 +00:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tty: USB does not need the filp argument in the drivers And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 20:13:26 +00:00
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
int result;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
FTDI_SIO_RESET_SIO,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
priv->interface, NULL, 0, WDR_TIMEOUT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Termios defaults are set by usb_serial_init. We don't change
Fix incorrect use of loose in tty/serial drivers [Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 16:34:46 +00:00
port->tty->termios - this would lose speed settings, etc.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
if (tty)
ftdi_set_termios(tty, port, tty->termios);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Start reading from the device */
USB: ftdi_sio: switch to generic read implementation Switch to generic read implementation and use process_read_urb to do device specific processing (handle line status). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:00 +00:00
result = usb_serial_generic_open(tty, port);
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
if (!result)
usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 14:06:19 +00:00
kref_get(&priv->kref);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return result;
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 11:26:29 +00:00
static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
/* Disable flow control */
if (!on && usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
0, priv->interface, NULL, 0,
tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 11:26:29 +00:00
WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
/* drop RTS and DTR */
if (on)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
else
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
mutex_unlock(&port->serial->disc_mutex);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* usbserial:__serial_close only calls ftdi_close if the point is open
*
* This only gets called when it is the last close
*/
tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 11:26:29 +00:00
static void ftdi_close(struct usb_serial_port *port)
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
usb_serial_generic_close(port);
usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 14:06:19 +00:00
kref_put(&priv->kref, ftdi_sio_priv_release);
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* The SIO requires the first byte to have:
* B0 1
* B1 0
* B2..7 length of message excluding byte 0
*
* The new devices do not require this byte
*/
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
void *dest, size_t size)
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
{
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
struct ftdi_private *priv;
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
int count;
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: switch to generic write implementation Switch to the generic, multi-urb, write implementation. Note that this will also make it fairly easy to use the generic fifo-based write implementation: simply unset the multi_urb_write flag and modify prepare_write_buffer (or unset if not using a legacy SIO device). This may be desirable for instance on an embedded system where optimal throughput at high baudrates may not be as important as other factors (e.g. no allocations during runtime and less pressure on host stack). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:44:17 +00:00
priv = usb_get_serial_port_data(port);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
USB: ftdi_sio: clean up SIO write support The original SIO devices require a control byte for every packet written. Clean up the unnecessarily messy implementation of this. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:45:01 +00:00
if (priv->chip_type == SIO) {
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
unsigned char *buffer = dest;
int i, len, c;
count = 0;
spin_lock_irqsave(&port->lock, flags);
for (i = 0; i < size - 1; i += priv->max_packet_size) {
len = min_t(int, size - i, priv->max_packet_size) - 1;
c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
if (!c)
break;
USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:27 +00:00
priv->icount.tx += c;
USB: ftdi_sio: fix legacy SIO-device header Length field of header was incorrectly set to available payload space rather than the actual payload size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-18 22:01:41 +00:00
buffer[i] = (c << 2) + 1;
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
count += c + 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
spin_unlock_irqrestore(&port->lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
USB: serial: remove multi-urb write from generic driver Remove multi-urb write from the generic driver and simplify the prepare_write_buffer prototype: int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); The default implementation simply fills dest with data from port write fifo but drivers can override it if they need to process the outgoing data (e.g. add headers). Turn ftdi_sio into a generic fifo-based driver, which lowers CPU usage significantly for small writes while retaining maximum throughput. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-05 21:58:13 +00:00
count = kfifo_out_locked(&port->write_fifo, dest, size,
&port->lock);
USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:27 +00:00
priv->icount.tx += count;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: fix race in ftdio_write this has the same race as the visor driver. The counter must be incremented under the lock it is checked under. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-23 13:30:16 +00:00
return count;
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: clean up line-status handling Reverse priority of errors reported to ldisc so that it matches that of other serial drivers (break takes precedence over parity, which takes precedence over framing errors). Also make sure overrun errors are handled as in other drivers, that is, an overrun error is always reported and is not associated with any received character (instead a NULL character with the TTY_OVERRUN flag set is inserted). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:24 +00:00
#define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
static int ftdi_process_packet(struct tty_struct *tty,
struct usb_serial_port *port, struct ftdi_private *priv,
char *packet, int len)
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int i;
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
char status;
char flag;
char *ch;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s - port %d", __func__, port->number);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
if (len < 2) {
dbg("malformed packet");
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
/* Compare new line status to the old one, signal if different/
N.B. packet may be processed more than once, but differences
are only processed once. */
status = packet[0] & FTDI_STATUS_B0_MASK;
USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:34 +00:00
if (status & FTDI_RS0_CTS)
priv->icount.cts++;
if (status & FTDI_RS0_DSR)
priv->icount.dsr++;
if (status & FTDI_RS0_RI)
priv->icount.rng++;
if (status & FTDI_RS0_RLSD)
priv->icount.dcd++;
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
if (status != priv->prev_status) {
priv->diff_status |= status ^ priv->prev_status;
wake_up_interruptible(&priv->delta_msr_wait);
priv->prev_status = status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
flag = TTY_NORMAL;
USB: ftdi_sio: clean up line-status handling Reverse priority of errors reported to ldisc so that it matches that of other serial drivers (break takes precedence over parity, which takes precedence over framing errors). Also make sure overrun errors are handled as in other drivers, that is, an overrun error is always reported and is not associated with any received character (instead a NULL character with the TTY_OVERRUN flag set is inserted). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:24 +00:00
if (packet[1] & FTDI_RS_ERR_MASK) {
/* Break takes precedence over parity, which takes precedence
* over framing errors */
if (packet[1] & FTDI_RS_BI) {
flag = TTY_BREAK;
USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:46 +00:00
priv->icount.brk++;
USB: ftdi_sio: clean up line-status handling Reverse priority of errors reported to ldisc so that it matches that of other serial drivers (break takes precedence over parity, which takes precedence over framing errors). Also make sure overrun errors are handled as in other drivers, that is, an overrun error is always reported and is not associated with any received character (instead a NULL character with the TTY_OVERRUN flag set is inserted). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:24 +00:00
usb_serial_handle_break(port);
} else if (packet[1] & FTDI_RS_PE) {
flag = TTY_PARITY;
USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:46 +00:00
priv->icount.parity++;
USB: ftdi_sio: clean up line-status handling Reverse priority of errors reported to ldisc so that it matches that of other serial drivers (break takes precedence over parity, which takes precedence over framing errors). Also make sure overrun errors are handled as in other drivers, that is, an overrun error is always reported and is not associated with any received character (instead a NULL character with the TTY_OVERRUN flag set is inserted). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:24 +00:00
} else if (packet[1] & FTDI_RS_FE) {
flag = TTY_FRAME;
USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:46 +00:00
priv->icount.frame++;
USB: ftdi_sio: clean up line-status handling Reverse priority of errors reported to ldisc so that it matches that of other serial drivers (break takes precedence over parity, which takes precedence over framing errors). Also make sure overrun errors are handled as in other drivers, that is, an overrun error is always reported and is not associated with any received character (instead a NULL character with the TTY_OVERRUN flag set is inserted). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:24 +00:00
}
/* Overrun is special, not associated with a char */
USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:46 +00:00
if (packet[1] & FTDI_RS_OE) {
priv->icount.overrun++;
USB: ftdi_sio: clean up line-status handling Reverse priority of errors reported to ldisc so that it matches that of other serial drivers (break takes precedence over parity, which takes precedence over framing errors). Also make sure overrun errors are handled as in other drivers, that is, an overrun error is always reported and is not associated with any received character (instead a NULL character with the TTY_OVERRUN flag set is inserted). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:24 +00:00
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:46 +00:00
}
[PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-02 09:34:11 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: serial: ftdi_sio: add support for TIOCSERGETLSR Willem-Jan noticed that the ftdi_sio driver did not support the TIOCSERGETLSR ioctl, and some userspace programs rely on it. This patch adds the support. Reported-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Tested-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 21:40:42 +00:00
/* save if the transmitter is empty or not */
if (packet[1] & FTDI_RS_TEMT)
priv->transmit_empty = 1;
else
priv->transmit_empty = 0;
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
len -= 2;
if (!len)
return 0; /* status only */
USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:16 +00:00
priv->icount.rx += len;
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
ch = packet + 2;
USB: ftdi_sio: use tty_insert_flip_string_fixed_flag Use tty_insert_flip_string_fixed_flag to report errors to line discipline. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:06 +00:00
if (port->port.console && port->sysrq) {
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
for (i = 0; i < len; i++, ch++) {
USB: drop tty argument from usb_serial_handle_sysrq_char() Since handle_sysrq() does not take tty as argument anymore we can drop it from usb_serial_handle_sysrq_char() as well. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-18 04:15:47 +00:00
if (!usb_serial_handle_sysrq_char(port, *ch))
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
tty_insert_flip_char(tty, *ch, flag);
[PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-02 09:34:11 +00:00
}
USB: ftdi_sio: use tty_insert_flip_string_fixed_flag Use tty_insert_flip_string_fixed_flag to report errors to line discipline. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:06 +00:00
} else {
tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
}
USB: ftdi_sio: use tty_insert_flip_string_fixed_flag Use tty_insert_flip_string_fixed_flag to report errors to line discipline. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-08 13:19:06 +00:00
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
return len;
}
[PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-02 09:34:11 +00:00
USB: ftdi_sio: switch to generic read implementation Switch to generic read implementation and use process_read_urb to do device specific processing (handle line status). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:00 +00:00
static void ftdi_process_read_urb(struct urb *urb)
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
{
USB: ftdi_sio: switch to generic read implementation Switch to generic read implementation and use process_read_urb to do device specific processing (handle line status). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:00 +00:00
struct usb_serial_port *port = urb->context;
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
struct tty_struct *tty;
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *data = (char *)urb->transfer_buffer;
int i;
int len;
int count = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
tty = tty_port_tty_get(&port->port);
if (!tty)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
len = min_t(int, urb->actual_length - i, priv->max_packet_size);
count += ftdi_process_packet(tty, port, priv, &data[i], len);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
if (count)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tty_flip_buffer_push(tty);
USB: ftdi_sio: re-implement read processing - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-07 18:05:07 +00:00
tty_kref_put(tty);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
struct usb_serial_port *port = tty->driver_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: ftdi_sio: remove unnecessary initialisations Return values are being initialised to zero only to be unconditionally assigned to a few instructions later. This may give the impression that zero is returned on success, which is not the case. Note also that ftdi_NDI_device_setup never reports errors. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:11 +00:00
__u16 urb_value;
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* break_state = -1 to turn on break, and 0 to turn off break */
/* see drivers/char/tty_io.c to see it used */
/* last_set_data_urb_value NEVER has the break bit set in it */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (break_state)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
else
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
urb_value = priv->last_set_data_urb_value;
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT) < 0) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev, "%s FAILED to enable/disable break state "
"(state was %d)\n", __func__, break_state);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s break state is %d - urb is %d", __func__,
break_state, urb_value);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* old_termios contains the original termios settings and tty->termios contains
* the new setting to be used
* WARNING: set_termios calls this with old_termios in kernel space
*/
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
USB: ftdi_sio: fix some coding style issues Remove unnecessary comments stating function names at (some) opening/closing braces. Fix some whitespace issues. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-17 22:06:09 +00:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
struct ktermios *termios = tty->termios;
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
unsigned int cflag = termios->c_cflag;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__u16 urb_value; /* will hold the new flags */
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* Added for xon/xoff support */
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
unsigned int iflag = termios->c_iflag;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned char vstop;
unsigned char vstart;
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* Force baud rate if this device requires it, unless it is set to
B0. */
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s: forcing baud rate for this device", __func__);
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
tty_encode_baud_rate(tty, priv->force_baud,
USB: ftd_sio cleanups and updates for new termios work checkpatch fixes WARNING: line over 80 characters #23: FILE: drivers/usb/serial/ftdi_sio.c:297: + speed_t force_baud; /* if non-zero, force the baud rate to this value */ ERROR: use tabs not spaces #31: FILE: drivers/usb/serial/ftdi_sio.c:881: +^I$ ERROR: use tabs not spaces #39: FILE: drivers/usb/serial/ftdi_sio.c:890: +^I$ WARNING: line over 80 characters #111: FILE: drivers/usb/serial/ftdi_sio.c:1956: + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:25 +00:00
priv->force_baud);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* Force RTS-CTS if this device requires it. */
if (priv->force_rtscts) {
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s: forcing rtscts for this device", __func__);
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
termios->c_cflag |= CRTSCTS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
cflag = termios->c_cflag;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 12:13:33 +00:00
if (old_termios->c_cflag == termios->c_cflag
&& old_termios->c_ispeed == termios->c_ispeed
&& old_termios->c_ospeed == termios->c_ospeed)
goto no_c_cflag_changes;
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
/* NOTE These routines can get interrupted by
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
ftdi_sio_read_bulk_callback - need to examine what this means -
don't see any problems yet */
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 12:13:33 +00:00
if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
(termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
goto no_data_parity_stop_changes;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Set number of data bits, parity, stop bits */
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
urb_value = 0;
urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
FTDI_SIO_SET_DATA_STOP_BITS_1);
USB: serial: ftdi_sio: add space/mark parity Add mark and space parity, since the device supports it. Signed-off-by: Roland Koebler <r.koebler@yahoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05 17:58:56 +00:00
if (cflag & PARENB) {
if (cflag & CMSPAR)
urb_value |= cflag & PARODD ?
FTDI_SIO_SET_DATA_PARITY_MARK :
FTDI_SIO_SET_DATA_PARITY_SPACE;
else
urb_value |= cflag & PARODD ?
FTDI_SIO_SET_DATA_PARITY_ODD :
FTDI_SIO_SET_DATA_PARITY_EVEN;
} else {
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default:
USB: ftdi_sio: remove support for 5 and 6 data bits Removed CS5 and CS6 from data bits since these are not supported in FTDI hardware. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-24 09:39:10 +00:00
dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* This is needed by the break command since it uses the same command
- but is or'ed with this value */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
priv->last_set_data_urb_value = urb_value;
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
FTDI_SIO_SET_DATA_REQUEST,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev, "%s FAILED to set "
"databits/stopbits/parity\n", __func__);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Now do the baudrate */
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 12:13:33 +00:00
no_data_parity_stop_changes:
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if ((cflag & CBAUD) == B0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Disable flow control */
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
0, priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT) < 0) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev,
"%s error from disable flowcontrol urb\n",
__func__);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Drop RTS and DTR */
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else {
/* set the baudrate determined before */
USB: ftdi_sio: Fix locking for change_speed() function The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-13 17:35:14 +00:00
mutex_lock(&priv->cfg_lock);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (change_speed(tty, port))
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev, "%s urb failed to set baudrate\n",
__func__);
USB: ftdi_sio: Fix locking for change_speed() function The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-13 17:35:14 +00:00
mutex_unlock(&priv->cfg_lock);
[PATCH] USB: ftdi_sio: allow baud rate to be changed without raising RTS and DTR I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for a bar code reader). Detecting the baudrate of the serial-IR involves keeping DTR low while changing baudrate. This works using normal 16550A serial ports as well as the FTDI driver version 1.4.0 (Linux 2.6.8) but stopped working with the change to "ensure RTS and DTR are raised when changing baudrate" introduced in version 1.4.1 (Linux 2.6.9). The attached patch fixes this, so RTS and DTR is only raised when changing baudrate iff the previous baudrate was B0. Signed-off-by: Peter Favrholdt <pfavr@how.dk> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:48:49 +00:00
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
[PATCH] USB: ftdi_sio: allow baud rate to be changed without raising RTS and DTR I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for a bar code reader). Detecting the baudrate of the serial-IR involves keeping DTR low while changing baudrate. This works using normal 16550A serial ports as well as the FTDI driver version 1.4.0 (Linux 2.6.8) but stopped working with the change to "ensure RTS and DTR are raised when changing baudrate" introduced in version 1.4.1 (Linux 2.6.9). The attached patch fixes this, so RTS and DTR is only raised when changing baudrate iff the previous baudrate was B0. Signed-off-by: Peter Favrholdt <pfavr@how.dk> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:48:49 +00:00
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/* Set flow control */
/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 12:13:33 +00:00
no_c_cflag_changes:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (cflag & CRTSCTS) {
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s Setting to CRTSCTS flow control", __func__);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
if (usb_control_msg(dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_sndctrlpipe(dev, 0),
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT) < 0) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev,
"urb failed to set to rts/cts flow control\n");
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
}
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Xon/Xoff code
*
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
* Check the IXOFF status in the iflag component of the
* termios structure. If IXOFF is not set, the pre-xon/xoff
* code is executed.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (iflag & IXOFF) {
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
dbg("%s request to enable xonxoff iflag=%04x",
__func__, iflag);
/* Try to enable the XON/XOFF on the ftdi_sio
* Set the vstart and vstop -- could have been done up
* above where a lot of other dereferencing is done but
* that would be very inefficient as vstart and vstop
* are not always needed.
*/
USB: ftd_sio: cleanups and updates for new termios work - Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 08:24:24 +00:00
vstart = termios->c_cc[VSTART];
vstop = termios->c_cc[VSTOP];
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
urb_value = (vstop << 8) | (vstart);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
urb_value , (FTDI_SIO_XON_XOFF_HS
| priv->interface),
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT) < 0) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev, "urb failed to set to "
"xon/xoff flow control\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
} else {
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* else clause to only run if cflag ! CRTSCTS and iflag
* ! XOFF. CHECKME Assuming XON/XOFF handled by tty
* stack - not by device */
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s Turning off hardware flow control", __func__);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
if (usb_control_msg(dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb_sndctrlpipe(dev, 0),
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
0, priv->interface,
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
NULL, 0, WDR_TIMEOUT) < 0) {
USB: remove use of err() in drivers/usb/serial err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-20 23:56:34 +00:00
dev_err(&port->dev,
"urb failed to clear flow control\n");
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
tiocmget: kill off the passing of the struct file We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 16:26:14 +00:00
static int ftdi_tiocmget(struct tty_struct *tty)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
struct usb_serial_port *port = tty->driver_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
unsigned char *buf;
USB: ftdi_sio: clean up modem status handling Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:10 +00:00
int len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int ret;
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s TIOCMGET", __func__);
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
USB: ftdi_sio: clean up modem status handling Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:10 +00:00
/*
* The 8U232AM returns a two byte value (the SIO a 1 byte value) in
* the same format as the data returned from the in point.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
switch (priv->chip_type) {
case SIO:
USB: ftdi_sio: clean up modem status handling Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:10 +00:00
len = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
case FT8U232AM:
case FT232BM:
case FT2232C:
USB: ftdi_sio: Handle FT232RL devices like FT232BM devices Handle the FT232RL device type in exactly the same way as FT232BM devices (FT232RL detection was added around kernel 2.6.20 but not code for handling it). Signed-off-by: Andrew M. Bishop <amb@gedanken.demon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-21 18:08:56 +00:00
case FT232RL:
USB: serial: FTDI: add high speed device support Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 14:03:09 +00:00
case FT2232H:
case FT4232H:
USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-17 15:30:23 +00:00
case FT232H:
USB: ftdi_sio: clean up modem status handling Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:10 +00:00
len = 2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
default:
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
ret = -EFAULT;
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
USB: ftdi_sio: clean up modem status handling Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:10 +00:00
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, len, WDR_TIMEOUT);
if (ret < 0)
goto out;
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
priv->last_dtr_rts;
USB: ftdi_sio: fix DMA buffers on stack Also remove unnecessary buffer allocations for zero-length transfers. Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-24 11:42:09 +00:00
out:
kfree(buf);
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 16:26:50 +00:00
static int ftdi_tiocmset(struct tty_struct *tty,
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
unsigned int set, unsigned int clear)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
struct usb_serial_port *port = tty->driver_data;
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s TIOCMSET", __func__);
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously ftdi_sio: Update RTS and DTR simultaneously, using a single control URB instead of separate control URBs for RTS and DTR. Reinhard Bergmann observed time differences of up to 680 ms with his application on a 2.4.22 kernel when RTS and DTR were updated using separate control URBs, which is unacceptable. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 19:16:41 +00:00
return update_mctrl(port, set, clear);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:08 +00:00
static int ftdi_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct async_icount *ic = &priv->icount;
icount->cts = ic->cts;
icount->dsr = ic->dsr;
icount->rng = ic->rng;
icount->dcd = ic->dcd;
icount->tx = ic->tx;
icount->rx = ic->rx;
icount->frame = ic->frame;
icount->parity = ic->parity;
icount->overrun = ic->overrun;
icount->brk = ic->brk;
icount->buf_overrun = ic->buf_overrun;
return 0;
}
tty: remove filp from the USB tty ioctls We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 16:27:06 +00:00
static int ftdi_ioctl(struct tty_struct *tty,
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
unsigned int cmd, unsigned long arg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
struct usb_serial_port *port = tty->driver_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
struct ftdi_private *priv = usb_get_serial_port_data(port);
USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:51 +00:00
struct async_icount cnow;
struct async_icount cprev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s cmd 0x%04x", __func__, cmd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Based on code from acm.c and others */
switch (cmd) {
case TIOCGSERIAL: /* gets serial port data */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
return get_serial_info(port,
(struct serial_struct __user *) arg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
case TIOCSSERIAL: /* sets serial port data */
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
return set_serial_info(tty, port,
(struct serial_struct __user *) arg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was.
*
* This code is borrowed from linux/drivers/char/serial.c
*/
case TIOCMIWAIT:
USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:51 +00:00
cprev = priv->icount;
while (1) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:51 +00:00
cnow = priv->icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
return -EIO; /* no change => error */
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:51 +00:00
cprev = cnow;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-10 15:24:51 +00:00
/* not reached */
break;
USB: serial: ftdi_sio: add support for TIOCSERGETLSR Willem-Jan noticed that the ftdi_sio driver did not support the TIOCSERGETLSR ioctl, and some userspace programs rely on it. This patch adds the support. Reported-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Tested-by: Willem-Jan de Hoog <wdehoog@exalondelft.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 21:40:42 +00:00
case TIOCSERGETLSR:
return get_lsr_info(port, (struct serial_struct __user *)arg);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
default:
break;
}
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
/* This is not necessarily an error - turns out the higher layers
* will do some ioctls themselves (see comment above)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:09:07 +00:00
return -ENOIOCTLCMD;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static int __init ftdi_init(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int retval;
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s", __func__);
[PATCH] USB ftdi_sio: user specified VID/PID ftdi_sio: Support one user specified vendor and product ID via a couple of new module parameters. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-28 17:40:32 +00:00
if (vendor > 0 && product > 0) {
/* Add user specified VID/PID to reserved element of table. */
int i;
for (i = 0; id_table_combined[i].idVendor; i++)
;
id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
id_table_combined[i].idVendor = vendor;
id_table_combined[i].idProduct = product;
}
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
retval = usb_serial_register(&ftdi_sio_device);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (retval)
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
goto failed_sio_register;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retval = usb_register(&ftdi_driver);
USB: ftdi_sio whitespace fixes Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 22:57:58 +00:00
if (retval)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto failed_usb_register;
USB: remove info() macro from usb/serial drivers USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-18 20:21:04 +00:00
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
failed_usb_register:
[PATCH] USB ftdi_sio: reduce device id table clutter ftdi_sio: Use a single usb_device_id table and detect the type of chip programatically. The table also flags devices requiring special initialization. The patch makes the driver about 10K smaller and makes it easier to add new device IDs. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:45:42 +00:00
usb_serial_deregister(&ftdi_sio_device);
failed_sio_register:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return retval;
}
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
static void __exit ftdi_exit(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
USB: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 00:08:34 +00:00
dbg("%s", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
usb_deregister(&ftdi_driver);
usb_serial_deregister(&ftdi_sio_device);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
module_init(ftdi_init);
module_exit(ftdi_exit);
ftdi_sio: Coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 10:11:23 +00:00
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
[PATCH] USB ftdi_sio: user specified VID/PID ftdi_sio: Support one user specified vendor and product ID via a couple of new module parameters. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-28 17:40:32 +00:00
module_param(vendor, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
__MODULE_STRING(FTDI_VID)")");
module_param(product, ushort, 0);
USB: ftdi_sio: fix 'product' parameter description Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-10 14:18:46 +00:00
MODULE_PARM_DESC(product, "User specified product ID");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: ftdi: support NDI devices It enhances the driver for FTDI-based USB serial adapters to recognize and support Northern Digital Inc (NDI) measurement equipment. NDI has been providing this patch for various kernel flavors for several years and we would like to see these changes built in to the driver so that our equipement works without the need for customers to patch the kernel themselves. The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things: 1. Define the VID and PIDs to allow the driver to recognize the NDI devices. 2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb We would have chosen to map 38400 to the higher rate, similar to what several other vendors have done, but some of our legacy customers actually use 38400, therefore we remap 19200 to the higher rate. 3. We set the default transmit latency in the FTDI chip to 1ms for our devices. Our devices are typically polled at 60Hz and the default ftdi latency seriously affects turn-around time and results in missed data frames. We have created a modprobe option that allows this setting to be increased. This has proven necessary particularly in some virtualized environments. Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-02 17:10:35 +00:00
module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
Reference in a new issue Copy permalink