linux/drivers/acpi/acpica/acglobal.h

488 lines
17 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: acglobal.h - Declarations for global variables
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACGLOBAL_H__
#define __ACGLOBAL_H__
/*
* Ensure that the globals are actually defined and initialized only once.
*
* The use of these macros allows a single list of globals (here) in order
* to simplify maintenance of the code.
*/
#ifdef DEFINE_ACPI_GLOBALS
#define ACPI_EXTERN
#define ACPI_INIT_GLOBAL(a,b) a=b
#else
#define ACPI_EXTERN extern
#define ACPI_INIT_GLOBAL(a,b) a
#endif
#ifdef DEFINE_ACPI_GLOBALS
/* Public globals, available from outside ACPICA subsystem */
/*****************************************************************************
*
* Runtime configuration (static defaults that can be overriden at runtime)
*
****************************************************************************/
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
* interpreter strictly follows the ACPI specification. Setting to TRUE
* allows the interpreter to ignore certain errors and/or bad AML constructs.
*
* Currently, these features are enabled by this flag:
*
* 1) Allow "implicit return" of last value in a control method
* 2) Allow access beyond the end of an operation region
* 3) Allow access to uninitialized locals/args (auto-init to integer 0)
* 4) Allow ANY object type to be a source operand for the Store() operator
* 5) Allow unresolved references (invalid target name) in package objects
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 05:00:00 +00:00
* 6) Enable warning messages for behavior that is not ACPI spec compliant
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_interpreter_slack, FALSE);
/*
* Automatically serialize ALL control methods? Default is FALSE, meaning
* to use the Serialized/not_serialized method flags on a per method basis.
* Only change this if the ASL code is poorly written and cannot handle
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
* reentrancy even though methods are marked "NotSerialized".
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_all_methods_serialized, FALSE);
/*
* Create the predefined _OSI method in the namespace? Default is TRUE
* because ACPI CA is fully compatible with other ACPI implementations.
* Changing this will revert ACPI CA (and machine ASL) to pre-OSI behavior.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE);
/*
* Optionally use default values for the ACPI register widths. Set this to
* TRUE to use the defaults, if an FADT contains incorrect widths/lengths.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, TRUE);
/*
* Optionally enable output from the AML Debug Object.
*/
bool ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
/*
* Optionally copy the entire DSDT to local memory (instead of simply
* mapping it.) There are some BIOSs that corrupt or replace the original
* DSDT, creating the need for this option. Default is FALSE, do not copy
* the DSDT.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE);
/*
* Optionally truncate I/O addresses to 16 bits. Provides compatibility
* with other ACPI implementations. NOTE: During ACPICA initialization,
* this value is set to TRUE if any Windows OSI strings have been
* requested by the BIOS.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE);
/*
* Disable runtime checking and repair of values returned by control methods.
* Use only if the repair is causing a problem on a particular machine.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_disable_auto_repair, FALSE);
/*
* Optionally do not load any SSDTs from the RSDT/XSDT during initialization.
* This can be useful for debugging ACPI problems on some machines.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_disable_ssdt_table_load, FALSE);
/*
* We keep track of the latest version of Windows that has been requested by
* the BIOS.
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_osi_data, 0);
/* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
struct acpi_table_fadt acpi_gbl_FADT;
u32 acpi_current_gpe_count;
u32 acpi_gbl_trace_flags;
acpi_name acpi_gbl_trace_method_name;
u8 acpi_gbl_system_awake_and_running;
/*
* ACPI 5.0 introduces the concept of a "reduced hardware platform", meaning
* that the ACPI hardware is no longer required. A flag in the FADT indicates
* a reduced HW machine, and that flag is duplicated here for convenience.
*/
u8 acpi_gbl_reduced_hardware;
#endif /* DEFINE_ACPI_GLOBALS */
/* Do not disassemble buffers to resource descriptors */
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_no_resource_disassembly, FALSE);
/*****************************************************************************
*
* ACPI Table globals
*
****************************************************************************/
/*
* acpi_gbl_root_table_list is the master list of ACPI tables that were
* found in the RSDT/XSDT.
*/
ACPI_EXTERN struct acpi_table_list acpi_gbl_root_table_list;
#if (!ACPI_REDUCED_HARDWARE)
ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS;
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 04:00:00 +00:00
#endif /* !ACPI_REDUCED_HARDWARE */
/* These addresses are calculated from the FADT Event Block addresses */
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status;
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_status;
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;
/* DSDT information. Used to check for DSDT corruption */
ACPI_EXTERN struct acpi_table_header *acpi_gbl_DSDT;
ACPI_EXTERN struct acpi_table_header acpi_gbl_original_dsdt_header;
/*
* Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is
* determined by the revision of the DSDT: If the DSDT revision is less than
* 2, use only the lower 32 bits of the internal 64-bit Integer.
*/
ACPI_EXTERN u8 acpi_gbl_integer_bit_width;
ACPI_EXTERN u8 acpi_gbl_integer_byte_width;
ACPI_EXTERN u8 acpi_gbl_integer_nybble_width;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
/*****************************************************************************
*
* Mutual exclusion within ACPICA subsystem
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
*
****************************************************************************/
/*
* Predefined mutex objects. This array contains the
* actual OS mutex handles, indexed by the local ACPI_MUTEX_HANDLEs.
* (The table maps local handles to the real OS handles)
*/
ACPI_EXTERN struct acpi_mutex_info acpi_gbl_mutex_info[ACPI_NUM_MUTEX];
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
/*
* Global lock mutex is an actual AML mutex object
* Global lock semaphore works in conjunction with the actual global lock
* Global lock spinlock is used for "pending" handshake
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
*/
ACPI_EXTERN union acpi_operand_object *acpi_gbl_global_lock_mutex;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
ACPI_EXTERN acpi_semaphore acpi_gbl_global_lock_semaphore;
ACPI_EXTERN acpi_spinlock acpi_gbl_global_lock_pending_lock;
ACPI_EXTERN u16 acpi_gbl_global_lock_handle;
ACPI_EXTERN u8 acpi_gbl_global_lock_acquired;
ACPI_EXTERN u8 acpi_gbl_global_lock_present;
ACPI_EXTERN u8 acpi_gbl_global_lock_pending;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
/*
* Spinlocks are used for interfaces that can be possibly called at
* interrupt level
*/
ACPI_EXTERN acpi_spinlock acpi_gbl_gpe_lock; /* For GPE data structs and registers */
ACPI_EXTERN acpi_spinlock acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */
ACPI_EXTERN acpi_spinlock acpi_gbl_reference_count_lock;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
/* Mutex for _OSI support */
ACPI_EXTERN acpi_mutex acpi_gbl_osi_mutex;
/* Reader/Writer lock is used for namespace walk and dynamic table unload */
ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock;
/*****************************************************************************
*
* Miscellaneous globals
*
****************************************************************************/
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 04:00:00 +00:00
/* Object caches */
ACPI_EXTERN acpi_cache_t *acpi_gbl_namespace_cache;
ACPI_EXTERN acpi_cache_t *acpi_gbl_state_cache;
ACPI_EXTERN acpi_cache_t *acpi_gbl_ps_node_cache;
ACPI_EXTERN acpi_cache_t *acpi_gbl_ps_node_ext_cache;
ACPI_EXTERN acpi_cache_t *acpi_gbl_operand_cache;
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 04:00:00 +00:00
/* Global handlers */
ACPI_EXTERN struct acpi_global_notify_handler acpi_gbl_global_notify[2];
ACPI_EXTERN acpi_exception_handler acpi_gbl_exception_handler;
ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler;
ACPI_EXTERN acpi_table_handler acpi_gbl_table_handler;
ACPI_EXTERN void *acpi_gbl_table_handler_context;
ACPI_EXTERN struct acpi_walk_state *acpi_gbl_breakpoint_walk;
ACPI_EXTERN acpi_interface_handler acpi_gbl_interface_handler;
/* Owner ID support */
ACPI_EXTERN u32 acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS];
ACPI_EXTERN u8 acpi_gbl_last_owner_id_index;
ACPI_EXTERN u8 acpi_gbl_next_owner_id_offset;
/* Initialization sequencing */
ACPI_EXTERN u8 acpi_gbl_reg_methods_executed;
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 04:00:00 +00:00
/* Misc */
ACPI_EXTERN u32 acpi_gbl_original_mode;
ACPI_EXTERN u32 acpi_gbl_rsdp_original_location;
ACPI_EXTERN u32 acpi_gbl_ns_lookup_count;
ACPI_EXTERN u32 acpi_gbl_ps_find_count;
ACPI_EXTERN u16 acpi_gbl_pm1_enable_register_save;
ACPI_EXTERN u8 acpi_gbl_debugger_configuration;
ACPI_EXTERN u8 acpi_gbl_step_to_next_call;
ACPI_EXTERN u8 acpi_gbl_acpi_hardware_present;
ACPI_EXTERN u8 acpi_gbl_events_initialized;
ACPI_EXTERN struct acpi_interface_info *acpi_gbl_supported_interfaces;
ACPI_EXTERN struct acpi_address_range
*acpi_gbl_address_range_list[ACPI_ADDRESS_RANGE_MAX];
#ifndef DEFINE_ACPI_GLOBALS
/* Other miscellaneous */
extern u8 acpi_gbl_shutdown;
extern u32 acpi_gbl_startup_flags;
extern const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT];
extern const char *acpi_gbl_lowest_dstate_names[ACPI_NUM_sx_w_METHODS];
extern const char *acpi_gbl_highest_dstate_names[ACPI_NUM_sx_d_METHODS];
extern const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES];
extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
#endif
ACPICA: Fix unmerged debugger divergences. Debugger improvements in ACPICA are always ignored by ACPICA Linux release. This will lead to divergences between Linux and ACPICA. This patch fixes such unmerged debugger updates. Following patches are included: 1. Fixed a couple compiler warnings for extra extern Wed, 14 Mar 2007 21:12:19 +0000 2. Cleanup for internal Reference Object. Wed, 27 Aug 2008 10:11:30 -0700 3. Debugger: Lock method args for multithread command. Fri, 24 Apr 2009 12:28:49 -0700 4. Debugger: Add max count argument for Batch command. Tue, 29 Sep 2009 12:31:58 -0700 5. Add new host interfaces for _OSI support. Thu, 5 Aug 2010 14:18:28 -0700 6. Increase debugger buffer size for method return objects. Wed, 17 Nov 2010 13:48:30 -0800 7. Debugger: Add command to display status of global handlers. Tue, 25 Jan 2011 13:47:58 -0800 8. Debugger: Split large dbcmds.c file. Wed, 26 Jan 2011 13:03:41 -0800 9. Debugger/AcpiExec: Add support to pass complex args to methods. Tue, 17 May 2011 13:33:39 -0700 10.Debugger: Add Template command to dump resource templates. Fri, 28 Oct 2011 14:18:51 -0700 11.Support for custom ACPICA build for ACPI 5.0 reduced hardware. Wed, 1 Feb 2012 13:18:17 -0800 12.Debugger: Improve command help support. Wed, 15 Feb 2012 07:59:26 -0800 13.Update ACPI_HW_DEPENDENT* macro invocations. Wed, 15 Feb 2012 08:14:08 -0800 14.Debugger: Rename function to simplify source code conversion. Wed, 13 Jun 2012 14:23:06 -0700 15.Debugger: Enhance "Tables" and "Unload" commands. Fri, 29 Jun 2012 13:10:58 -0700 16.Debugger: update prototype for AcpiDbSleep function. Fri, 17 Aug 2012 13:43:02 -0700 This patch will not affect the generated vmlinx binary. This will decrease 264 lines of 20120913 divergence.diff. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-31 02:25:15 +00:00
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
/* Lists for tracking memory allocations */
ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
ACPI_EXTERN u8 acpi_gbl_disable_mem_tracking;
ACPICA: Fix unmerged debugger divergences. Debugger improvements in ACPICA are always ignored by ACPICA Linux release. This will lead to divergences between Linux and ACPICA. This patch fixes such unmerged debugger updates. Following patches are included: 1. Fixed a couple compiler warnings for extra extern Wed, 14 Mar 2007 21:12:19 +0000 2. Cleanup for internal Reference Object. Wed, 27 Aug 2008 10:11:30 -0700 3. Debugger: Lock method args for multithread command. Fri, 24 Apr 2009 12:28:49 -0700 4. Debugger: Add max count argument for Batch command. Tue, 29 Sep 2009 12:31:58 -0700 5. Add new host interfaces for _OSI support. Thu, 5 Aug 2010 14:18:28 -0700 6. Increase debugger buffer size for method return objects. Wed, 17 Nov 2010 13:48:30 -0800 7. Debugger: Add command to display status of global handlers. Tue, 25 Jan 2011 13:47:58 -0800 8. Debugger: Split large dbcmds.c file. Wed, 26 Jan 2011 13:03:41 -0800 9. Debugger/AcpiExec: Add support to pass complex args to methods. Tue, 17 May 2011 13:33:39 -0700 10.Debugger: Add Template command to dump resource templates. Fri, 28 Oct 2011 14:18:51 -0700 11.Support for custom ACPICA build for ACPI 5.0 reduced hardware. Wed, 1 Feb 2012 13:18:17 -0800 12.Debugger: Improve command help support. Wed, 15 Feb 2012 07:59:26 -0800 13.Update ACPI_HW_DEPENDENT* macro invocations. Wed, 15 Feb 2012 08:14:08 -0800 14.Debugger: Rename function to simplify source code conversion. Wed, 13 Jun 2012 14:23:06 -0700 15.Debugger: Enhance "Tables" and "Unload" commands. Fri, 29 Jun 2012 13:10:58 -0700 16.Debugger: update prototype for AcpiDbSleep function. Fri, 17 Aug 2012 13:43:02 -0700 This patch will not affect the generated vmlinx binary. This will decrease 264 lines of 20120913 divergence.diff. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-31 02:25:15 +00:00
#endif
/*****************************************************************************
*
* Namespace globals
*
****************************************************************************/
#if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)
#define NUM_PREDEFINED_NAMES 10
#else
#define NUM_PREDEFINED_NAMES 9
#endif
ACPI_EXTERN struct acpi_namespace_node acpi_gbl_root_node_struct;
ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_root_node;
ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_fadt_gpe_device;
ACPI_EXTERN union acpi_operand_object *acpi_gbl_module_code_list;
extern const u8 acpi_gbl_ns_properties[ACPI_NUM_NS_TYPES];
extern const struct acpi_predefined_names
acpi_gbl_pre_defined_names[NUM_PREDEFINED_NAMES];
#ifdef ACPI_DEBUG_OUTPUT
ACPI_EXTERN u32 acpi_gbl_current_node_count;
ACPI_EXTERN u32 acpi_gbl_current_node_size;
ACPI_EXTERN u32 acpi_gbl_max_concurrent_node_count;
ACPI_EXTERN acpi_size *acpi_gbl_entry_stack_pointer;
ACPI_EXTERN acpi_size *acpi_gbl_lowest_stack_pointer;
ACPI_EXTERN u32 acpi_gbl_deepest_nesting;
#endif
/*****************************************************************************
*
* Interpreter globals
*
****************************************************************************/
ACPI_EXTERN struct acpi_thread_state *acpi_gbl_current_walk_list;
/* Control method single step flag */
ACPI_EXTERN u8 acpi_gbl_cm_single_step;
/*****************************************************************************
*
* Hardware globals
*
****************************************************************************/
extern struct acpi_bit_register_info
acpi_gbl_bit_register_info[ACPI_NUM_BITREG];
ACPI_EXTERN u8 acpi_gbl_sleep_type_a;
ACPI_EXTERN u8 acpi_gbl_sleep_type_b;
/*****************************************************************************
*
* Event and GPE globals
*
****************************************************************************/
#if (!ACPI_REDUCED_HARDWARE)
ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
ACPI_EXTERN struct acpi_gpe_block_info
*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
ACPI_EXTERN acpi_gbl_event_handler acpi_gbl_global_event_handler;
ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
ACPI_EXTERN struct acpi_fixed_event_handler
acpi_gbl_fixed_event_handlers[ACPI_NUM_FIXED_EVENTS];
extern struct acpi_fixed_event_info
acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS];
#endif /* !ACPI_REDUCED_HARDWARE */
ACPICA: Fix unmerged debugger divergences. Debugger improvements in ACPICA are always ignored by ACPICA Linux release. This will lead to divergences between Linux and ACPICA. This patch fixes such unmerged debugger updates. Following patches are included: 1. Fixed a couple compiler warnings for extra extern Wed, 14 Mar 2007 21:12:19 +0000 2. Cleanup for internal Reference Object. Wed, 27 Aug 2008 10:11:30 -0700 3. Debugger: Lock method args for multithread command. Fri, 24 Apr 2009 12:28:49 -0700 4. Debugger: Add max count argument for Batch command. Tue, 29 Sep 2009 12:31:58 -0700 5. Add new host interfaces for _OSI support. Thu, 5 Aug 2010 14:18:28 -0700 6. Increase debugger buffer size for method return objects. Wed, 17 Nov 2010 13:48:30 -0800 7. Debugger: Add command to display status of global handlers. Tue, 25 Jan 2011 13:47:58 -0800 8. Debugger: Split large dbcmds.c file. Wed, 26 Jan 2011 13:03:41 -0800 9. Debugger/AcpiExec: Add support to pass complex args to methods. Tue, 17 May 2011 13:33:39 -0700 10.Debugger: Add Template command to dump resource templates. Fri, 28 Oct 2011 14:18:51 -0700 11.Support for custom ACPICA build for ACPI 5.0 reduced hardware. Wed, 1 Feb 2012 13:18:17 -0800 12.Debugger: Improve command help support. Wed, 15 Feb 2012 07:59:26 -0800 13.Update ACPI_HW_DEPENDENT* macro invocations. Wed, 15 Feb 2012 08:14:08 -0800 14.Debugger: Rename function to simplify source code conversion. Wed, 13 Jun 2012 14:23:06 -0700 15.Debugger: Enhance "Tables" and "Unload" commands. Fri, 29 Jun 2012 13:10:58 -0700 16.Debugger: update prototype for AcpiDbSleep function. Fri, 17 Aug 2012 13:43:02 -0700 This patch will not affect the generated vmlinx binary. This will decrease 264 lines of 20120913 divergence.diff. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-31 02:25:15 +00:00
/*****************************************************************************
*
* Debug support
*
****************************************************************************/
/* Procedure nesting level for debug output */
extern u32 acpi_gbl_nesting_level;
/* Event counters */
ACPI_EXTERN u32 acpi_gpe_count;
ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
/* Support for dynamic control method tracing mechanism */
ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
/*****************************************************************************
*
* Debugger and Disassembler globals
*
****************************************************************************/
ACPI_EXTERN u8 acpi_gbl_db_output_flags;
#ifdef ACPI_DISASSEMBLER
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_ignore_noop_operator, FALSE);
ACPI_EXTERN u8 acpi_gbl_db_opt_disasm;
ACPI_EXTERN u8 acpi_gbl_db_opt_verbose;
ACPI_EXTERN u8 acpi_gbl_num_external_methods;
ACPI_EXTERN u32 acpi_gbl_resolved_external_methods;
ACPI_EXTERN struct acpi_external_list *acpi_gbl_external_list;
ACPI_EXTERN struct acpi_external_file *acpi_gbl_external_file_list;
#endif
#ifdef ACPI_DEBUGGER
extern u8 acpi_gbl_method_executing;
extern u8 acpi_gbl_abort_method;
extern u8 acpi_gbl_db_terminate_threads;
ACPI_EXTERN u8 acpi_gbl_db_opt_tables;
ACPI_EXTERN u8 acpi_gbl_db_opt_stats;
ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
ACPI_EXTERN u8 acpi_gbl_db_opt_no_region_support;
ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
ACPICA: Fix unmerged debugger divergences. Debugger improvements in ACPICA are always ignored by ACPICA Linux release. This will lead to divergences between Linux and ACPICA. This patch fixes such unmerged debugger updates. Following patches are included: 1. Fixed a couple compiler warnings for extra extern Wed, 14 Mar 2007 21:12:19 +0000 2. Cleanup for internal Reference Object. Wed, 27 Aug 2008 10:11:30 -0700 3. Debugger: Lock method args for multithread command. Fri, 24 Apr 2009 12:28:49 -0700 4. Debugger: Add max count argument for Batch command. Tue, 29 Sep 2009 12:31:58 -0700 5. Add new host interfaces for _OSI support. Thu, 5 Aug 2010 14:18:28 -0700 6. Increase debugger buffer size for method return objects. Wed, 17 Nov 2010 13:48:30 -0800 7. Debugger: Add command to display status of global handlers. Tue, 25 Jan 2011 13:47:58 -0800 8. Debugger: Split large dbcmds.c file. Wed, 26 Jan 2011 13:03:41 -0800 9. Debugger/AcpiExec: Add support to pass complex args to methods. Tue, 17 May 2011 13:33:39 -0700 10.Debugger: Add Template command to dump resource templates. Fri, 28 Oct 2011 14:18:51 -0700 11.Support for custom ACPICA build for ACPI 5.0 reduced hardware. Wed, 1 Feb 2012 13:18:17 -0800 12.Debugger: Improve command help support. Wed, 15 Feb 2012 07:59:26 -0800 13.Update ACPI_HW_DEPENDENT* macro invocations. Wed, 15 Feb 2012 08:14:08 -0800 14.Debugger: Rename function to simplify source code conversion. Wed, 13 Jun 2012 14:23:06 -0700 15.Debugger: Enhance "Tables" and "Unload" commands. Fri, 29 Jun 2012 13:10:58 -0700 16.Debugger: update prototype for AcpiDbSleep function. Fri, 17 Aug 2012 13:43:02 -0700 This patch will not affect the generated vmlinx binary. This will decrease 264 lines of 20120913 divergence.diff. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-31 02:25:15 +00:00
ACPI_EXTERN acpi_object_type acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS];
ACPI_EXTERN char acpi_gbl_db_line_buf[ACPI_DB_LINE_BUFFER_SIZE];
ACPI_EXTERN char acpi_gbl_db_parsed_buf[ACPI_DB_LINE_BUFFER_SIZE];
ACPI_EXTERN char acpi_gbl_db_scope_buf[80];
ACPI_EXTERN char acpi_gbl_db_debug_filename[80];
ACPI_EXTERN u8 acpi_gbl_db_output_to_file;
ACPI_EXTERN char *acpi_gbl_db_buffer;
ACPI_EXTERN char *acpi_gbl_db_filename;
ACPI_EXTERN u32 acpi_gbl_db_debug_level;
ACPI_EXTERN u32 acpi_gbl_db_console_debug_level;
ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_db_scope_node;
/*
* Statistic globals
*/
ACPI_EXTERN u16 acpi_gbl_obj_type_count[ACPI_TYPE_NS_NODE_MAX + 1];
ACPI_EXTERN u16 acpi_gbl_node_type_count[ACPI_TYPE_NS_NODE_MAX + 1];
ACPI_EXTERN u16 acpi_gbl_obj_type_count_misc;
ACPI_EXTERN u16 acpi_gbl_node_type_count_misc;
ACPI_EXTERN u32 acpi_gbl_num_nodes;
ACPI_EXTERN u32 acpi_gbl_num_objects;
ACPI_EXTERN u32 acpi_gbl_size_of_parse_tree;
ACPI_EXTERN u32 acpi_gbl_size_of_method_trees;
ACPI_EXTERN u32 acpi_gbl_size_of_node_entries;
ACPI_EXTERN u32 acpi_gbl_size_of_acpi_objects;
#endif /* ACPI_DEBUGGER */
/*****************************************************************************
*
* Info/help support
*
****************************************************************************/
extern const struct ah_predefined_name asl_predefined_info[];
#endif /* __ACGLOBAL_H__ */