linux/include/asm-generic/bug.h

212 lines
5.7 KiB
C
Raw Normal View History

#ifndef _ASM_GENERIC_BUG_H
#define _ASM_GENERIC_BUG_H
#include <linux/compiler.h>
#ifdef CONFIG_GENERIC_BUG
#define BUGFLAG_WARNING (1 << 0)
#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
#endif
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#ifdef CONFIG_BUG
[PATCH] Generic BUG implementation This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:19 +00:00
#ifdef CONFIG_GENERIC_BUG
struct bug_entry {
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
[PATCH] Generic BUG implementation This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:19 +00:00
unsigned long bug_addr;
#else
signed int bug_addr_disp;
#endif
[PATCH] Generic BUG implementation This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:19 +00:00
#ifdef CONFIG_DEBUG_BUGVERBOSE
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
[PATCH] Generic BUG implementation This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:19 +00:00
const char *file;
#else
signed int file_disp;
#endif
[PATCH] Generic BUG implementation This patch adds common handling for kernel BUGs, for use by architectures as they wish. The code is derived from arch/powerpc. The advantages of having common BUG handling are: - consistent BUG reporting across architectures - shared implementation of out-of-line file/line data - implement CONFIG_DEBUG_BUGVERBOSE consistently This means that in inline impact of BUG is just the illegal instruction itself, which is an improvement for i386 and x86-64. A BUG is represented in the instruction stream as an illegal instruction, which has file/line information associated with it. This extra information is stored in the __bug_table section in the ELF file. When the kernel gets an illegal instruction, it first confirms it might possibly be from a BUG (ie, in kernel mode, the right illegal instruction). It then calls report_bug(). This searches __bug_table for a matching instruction pointer, and if found, prints the corresponding file/line information. If report_bug() determines that it wasn't a BUG which caused the trap, it returns BUG_TRAP_TYPE_NONE. Some architectures (powerpc) implement WARN using the same mechanism; if the illegal instruction was the result of a WARN, then report_bug(Q) returns CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG. lib/bug.c keeps a list of loaded modules which can be searched for __bug_table entries. The architecture must call module_bug_finalize()/module_bug_cleanup() from its corresponding module_finalize/cleanup functions. Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount. At the very least, filename and line information will not be recorded for each but, but architectures may decide to store no extra information per BUG at all. Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so architectures will generally have to include an infinite loop (or similar) in the BUG code, so that gcc knows execution won't continue beyond that point. gcc does have a __builtin_trap() operator which may be useful to achieve the same effect, unfortunately it cannot be used to actually implement the BUG itself, because there's no way to get the instruction's address for use in generating the __bug_table entry. [randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors] [bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 10:36:19 +00:00
unsigned short line;
#endif
unsigned short flags;
};
#endif /* CONFIG_GENERIC_BUG */
/*
* Don't use BUG() or BUG_ON() unless there's really no way out; one
* example might be detecting data structure corruption in the middle
* of an operation that can't be backed out of. If the (sub)system
* can somehow continue operating, perhaps with reduced functionality,
* it's probably not BUG-worthy.
*
* If you're tempted to BUG(), think again: is completely giving up
* really the *only* solution? There are usually better options, where
* users don't need to reboot ASAP and can mostly shut down cleanly.
*/
#ifndef HAVE_ARCH_BUG
#define BUG() do { \
printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
panic("BUG!"); \
} while (0)
#endif
#ifndef HAVE_ARCH_BUG_ON
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
#endif
/*
* WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
* significant issues that need prompt attention if they should ever
* appear at runtime. Use the versions with printk format strings
* to provide better diagnostics.
*/
#ifndef __WARN_TAINT
extern __printf(3, 4)
void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...);
extern __printf(4, 5)
void warn_slowpath_fmt_taint(const char *file, const int line, unsigned taint,
const char *fmt, ...);
extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#define __WARN_printf_taint(taint, arg...) \
warn_slowpath_fmt_taint(__FILE__, __LINE__, taint, arg)
#else
#define __WARN() __WARN_TAINT(TAINT_WARN)
#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0)
#define __WARN_printf_taint(taint, arg...) \
do { printk(arg); __WARN_TAINT(taint); } while (0)
#endif
#ifndef WARN_ON
#define WARN_ON(condition) ({ \
int __ret_warn_on = !!(condition); \
if (unlikely(__ret_warn_on)) \
__WARN(); \
unlikely(__ret_warn_on); \
})
#endif
#ifndef WARN
#define WARN(condition, format...) ({ \
int __ret_warn_on = !!(condition); \
if (unlikely(__ret_warn_on)) \
__WARN_printf(format); \
unlikely(__ret_warn_on); \
})
#endif
#define WARN_TAINT(condition, taint, format...) ({ \
int __ret_warn_on = !!(condition); \
if (unlikely(__ret_warn_on)) \
__WARN_printf_taint(taint, format); \
unlikely(__ret_warn_on); \
})
#define WARN_ON_ONCE(condition) ({ \
static bool __section(.data.unlikely) __warned; \
int __ret_warn_once = !!(condition); \
\
if (unlikely(__ret_warn_once)) \
if (WARN_ON(!__warned)) \
__warned = true; \
unlikely(__ret_warn_once); \
})
#define WARN_ONCE(condition, format...) ({ \
static bool __section(.data.unlikely) __warned; \
int __ret_warn_once = !!(condition); \
\
if (unlikely(__ret_warn_once)) \
if (WARN(!__warned, format)) \
__warned = true; \
unlikely(__ret_warn_once); \
})
#define WARN_TAINT_ONCE(condition, taint, format...) ({ \
static bool __section(.data.unlikely) __warned; \
int __ret_warn_once = !!(condition); \
\
if (unlikely(__ret_warn_once)) \
if (WARN_TAINT(!__warned, taint, format)) \
__warned = true; \
unlikely(__ret_warn_once); \
})
#else /* !CONFIG_BUG */
#ifndef HAVE_ARCH_BUG
bug: Make BUG() always stop the machine When !CONFIG_BUG and !HAVE_ARCH_BUG, define the generic BUG() as an infinite loop rather than a no-op. This avoids undefined behavior if execution ever actually reaches BUG(), and avoids warnings about code after BUG() (such as on non-void functions calling BUG() and then not returning). bloat-o-meter results: add/remove: 0/0 grow/shrink: 43/10 up/down: 235/-98 (137) function old new delta umount_collect 119 138 +19 notify_change 306 324 +18 xstate_enable_boot_cpu 252 269 +17 kunmap 54 70 +16 balloon_page_dequeue 112 126 +14 mm_take_all_locks 223 233 +10 list_lru_walk_node 143 152 +9 vma_adjust 1059 1067 +8 pcpu_setup_first_chunk 1130 1138 +8 mm_drop_all_locks 143 151 +8 ns_capable 55 62 +7 anon_transport_class_unregister 8 15 +7 srcu_init_notifier_head 35 41 +6 shrink_dcache_for_umount 174 180 +6 kunmap_high 99 105 +6 end_page_writeback 43 49 +6 do_exit 1339 1345 +6 __kfifo_dma_out_prepare_r 86 92 +6 __kfifo_dma_in_prepare_r 90 96 +6 fixup_user_fault 120 125 +5 repair_env_string 73 77 +4 read_cache_pages_invalidate_page 56 60 +4 isolate_lru_pages.isra 142 146 +4 do_notify_parent_cldstop 255 259 +4 cpu_init 370 374 +4 utimes_common 270 272 +2 tasklet_hi_action 91 93 +2 tasklet_action 91 93 +2 set_pte_vaddr 46 48 +2 find_get_pages_tag 202 204 +2 early_iounmap 185 187 +2 __native_set_fixmap 36 38 +2 __get_user_pages 822 824 +2 __early_ioremap 299 301 +2 yield_task_stop 1 2 +1 tick_resume 37 38 +1 switched_to_stop 1 2 +1 switched_to_idle 1 2 +1 prio_changed_stop 1 2 +1 prio_changed_idle 1 2 +1 pm_qos_power_read 111 112 +1 arch_cpu_idle_dead 1 2 +1 __insert_vmap_area 140 141 +1 sys_renameat 614 612 -2 mm_fault_error 297 295 -2 SyS_renameat 614 612 -2 sys_linkat 416 413 -3 SyS_linkat 416 413 -3 chmod_common 129 122 -7 proc_cap_handler 240 225 -15 __schedule 849 831 -18 sys_madvise 1077 1054 -23 SyS_madvise 1077 1054 -23 Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 22:39:13 +00:00
#define BUG() do {} while (1)
#endif
#ifndef HAVE_ARCH_BUG_ON
#define BUG_ON(condition) do { if (condition) ; } while (0)
#endif
#ifndef HAVE_ARCH_WARN_ON
#define WARN_ON(condition) ({ \
int __ret_warn_on = !!(condition); \
unlikely(__ret_warn_on); \
})
#endif
#ifndef WARN
#define WARN(condition, format...) ({ \
int __ret_warn_on = !!(condition); \
no_printk(format); \
unlikely(__ret_warn_on); \
})
#endif
#define WARN_ON_ONCE(condition) WARN_ON(condition)
#define WARN_ONCE(condition, format...) WARN(condition, format)
#define WARN_TAINT(condition, taint, format...) WARN(condition, format)
#define WARN_TAINT_ONCE(condition, taint, format...) WARN(condition, format)
#endif
/*
* WARN_ON_SMP() is for cases that the warning is either
* meaningless for !SMP or may even cause failures.
* This is usually used for cases that we have
* WARN_ON(!spin_is_locked(&lock)) checks, as spin_is_locked()
* returns 0 for uniprocessor settings.
* It can also be used with values that are only defined
* on SMP:
*
* struct foo {
* [...]
* #ifdef CONFIG_SMP
* int bar;
* #endif
* };
*
* void func(struct foo *zoot)
* {
* WARN_ON_SMP(!zoot->bar);
*
* For CONFIG_SMP, WARN_ON_SMP() should act the same as WARN_ON(),
* and should be a nop and return false for uniprocessor.
*
* if (WARN_ON_SMP(x)) returns true only when CONFIG_SMP is set
* and x is true.
*/
#ifdef CONFIG_SMP
# define WARN_ON_SMP(x) WARN_ON(x)
#else
/*
* Use of ({0;}) because WARN_ON_SMP(x) may be used either as
* a stand alone line statement or as a condition in an if ()
* statement.
* A simple "0" would cause gcc to give a "statement has no effect"
* warning.
*/
# define WARN_ON_SMP(x) ({0;})
#endif
#endif /* __ASSEMBLY__ */
#endif