linux/drivers/gpu/drm/nouveau/nv04_dfp.c

695 lines
23 KiB
C
Raw Normal View History

/*
* Copyright 2003 NVIDIA, Corporation
* Copyright 2006 Dave Airlie
* Copyright 2007 Maarten Maathuis
* Copyright 2007-2009 Stuart Bennett
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include "drmP.h"
#include "drm_crtc_helper.h"
#include "nouveau_drv.h"
#include "nouveau_encoder.h"
#include "nouveau_connector.h"
#include "nouveau_crtc.h"
#include "nouveau_hw.h"
#include "nvreg.h"
#include "i2c/sil164.h"
#define FP_TG_CONTROL_ON (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS | \
NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS | \
NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
#define FP_TG_CONTROL_OFF (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_DISABLE | \
NV_PRAMDAC_FP_TG_CONTROL_HSYNC_DISABLE | \
NV_PRAMDAC_FP_TG_CONTROL_VSYNC_DISABLE)
static inline bool is_fpc_off(uint32_t fpc)
{
return ((fpc & (FP_TG_CONTROL_ON | FP_TG_CONTROL_OFF)) ==
FP_TG_CONTROL_OFF);
}
int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_entry *dcbent)
{
/* special case of nv_read_tmds to find crtc associated with an output.
* this does not give a correct answer for off-chip dvi, but there's no
* use for such an answer anyway
*/
int ramdac = (dcbent->or & OUTPUT_C) >> 2;
NVWriteRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_CONTROL,
NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE | 0x4);
return ((NVReadRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_DATA) & 0x8) >> 3) ^ ramdac;
}
void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_entry *dcbent,
int head, bool dl)
{
/* The BIOS scripts don't do this for us, sadly
* Luckily we do know the values ;-)
*
* head < 0 indicates we wish to force a setting with the overrideval
* (for VT restore etc.)
*/
int ramdac = (dcbent->or & OUTPUT_C) >> 2;
uint8_t tmds04 = 0x80;
if (head != ramdac)
tmds04 = 0x88;
if (dcbent->type == OUTPUT_LVDS)
tmds04 |= 0x01;
nv_write_tmds(dev, dcbent->or, 0, 0x04, tmds04);
if (dl) /* dual link */
nv_write_tmds(dev, dcbent->or, 1, 0x04, tmds04 ^ 0x08);
}
void nv04_dfp_disable(struct drm_device *dev, int head)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
if (NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL) &
FP_TG_CONTROL_ON) {
/* digital remnants must be cleaned before new crtc
* values programmed. delay is time for the vga stuff
* to realise it's in control again
*/
NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
FP_TG_CONTROL_OFF);
msleep(50);
}
/* don't inadvertently turn it on when state written later */
crtcstate[head].fp_control = FP_TG_CONTROL_OFF;
}
void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
struct nouveau_crtc *nv_crtc;
uint32_t *fpc;
if (mode == DRM_MODE_DPMS_ON) {
nv_crtc = nouveau_crtc(encoder->crtc);
fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
if (is_fpc_off(*fpc)) {
/* using saved value is ok, as (is_digital && dpms_on &&
* fp_control==OFF) is (at present) *only* true when
* fpc's most recent change was by below "off" code
*/
*fpc = nv_crtc->dpms_saved_fp_control;
}
nv_crtc->fp_users |= 1 << nouveau_encoder(encoder)->dcb->index;
NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_FP_TG_CONTROL, *fpc);
} else {
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
nv_crtc = nouveau_crtc(crtc);
fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
nv_crtc->fp_users &= ~(1 << nouveau_encoder(encoder)->dcb->index);
if (!is_fpc_off(*fpc) && !nv_crtc->fp_users) {
nv_crtc->dpms_saved_fp_control = *fpc;
/* cut the FP output */
*fpc &= ~FP_TG_CONTROL_ON;
*fpc |= FP_TG_CONTROL_OFF;
NVWriteRAMDAC(dev, nv_crtc->index,
NV_PRAMDAC_FP_TG_CONTROL, *fpc);
}
}
}
}
static struct drm_encoder *get_tmds_slave(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
struct drm_encoder *slave;
if (dcb->type != OUTPUT_TMDS || dcb->location == DCB_LOC_ON_CHIP)
return NULL;
/* Some BIOSes (e.g. the one in a Quadro FX1000) report several
* TMDS transmitters at the same I2C address, in the same I2C
* bus. This can still work because in that case one of them is
* always hard-wired to a reasonable configuration using straps,
* and the other one needs to be programmed.
*
* I don't think there's a way to know which is which, even the
* blob programs the one exposed via I2C for *both* heads, so
* let's do the same.
*/
list_for_each_entry(slave, &dev->mode_config.encoder_list, head) {
struct dcb_entry *slave_dcb = nouveau_encoder(slave)->dcb;
if (slave_dcb->type == OUTPUT_TMDS && get_slave_funcs(slave) &&
slave_dcb->tmdsconf.slave_addr == dcb->tmdsconf.slave_addr)
return slave;
}
return NULL;
}
static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
/* For internal panels and gpu scaling on DVI we need the native mode */
if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
if (!nv_connector->native_mode)
return false;
nv_encoder->mode = *nv_connector->native_mode;
adjusted_mode->clock = nv_connector->native_mode->clock;
} else {
nv_encoder->mode = *adjusted_mode;
}
return true;
}
static void nv04_dfp_prepare_sel_clk(struct drm_device *dev,
struct nouveau_encoder *nv_encoder, int head)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv04_mode_state *state = &dev_priv->mode_reg;
uint32_t bits1618 = nv_encoder->dcb->or & OUTPUT_A ? 0x10000 : 0x40000;
if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP)
return;
/* SEL_CLK is only used on the primary ramdac
* It toggles spread spectrum PLL output and sets the bindings of PLLs
* to heads on digital outputs
*/
if (head)
state->sel_clk |= bits1618;
else
state->sel_clk &= ~bits1618;
/* nv30:
* bit 0 NVClk spread spectrum on/off
* bit 2 MemClk spread spectrum on/off
* bit 4 PixClk1 spread spectrum on/off toggle
* bit 6 PixClk2 spread spectrum on/off toggle
*
* nv40 (observations from bios behaviour and mmio traces):
* bits 4&6 as for nv30
* bits 5&7 head dependent as for bits 4&6, but do not appear with 4&6;
* maybe a different spread mode
* bits 8&10 seen on dual-link dvi outputs, purpose unknown (set by POST scripts)
* The logic behind turning spread spectrum on/off in the first place,
* and which bit-pair to use, is unclear on nv40 (for earlier cards, the fp table
* entry has the necessary info)
*/
if (nv_encoder->dcb->type == OUTPUT_LVDS && dev_priv->saved_reg.sel_clk & 0xf0) {
int shift = (dev_priv->saved_reg.sel_clk & 0x50) ? 0 : 1;
state->sel_clk &= ~0xf0;
state->sel_clk |= (head ? 0x40 : 0x10) << shift;
}
}
static void nv04_dfp_prepare(struct drm_encoder *encoder)
{
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct drm_encoder_helper_funcs *helper = encoder->helper_private;
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
int head = nouveau_crtc(encoder->crtc)->index;
struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
uint8_t *cr_lcd = &crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX];
uint8_t *cr_lcd_oth = &crtcstate[head ^ 1].CRTC[NV_CIO_CRE_LCD__INDEX];
helper->dpms(encoder, DRM_MODE_DPMS_OFF);
nv04_dfp_prepare_sel_clk(dev, nv_encoder, head);
/* Some NV4x have unknown values (0x3f, 0x50, 0x54, 0x6b, 0x79, 0x7f)
* at LCD__INDEX which we don't alter
*/
if (!(*cr_lcd & 0x44)) {
*cr_lcd = 0x3;
if (nv_two_heads(dev)) {
if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
*cr_lcd |= head ? 0x0 : 0x8;
else {
*cr_lcd |= (nv_encoder->dcb->or << 4) & 0x30;
if (nv_encoder->dcb->type == OUTPUT_LVDS)
*cr_lcd |= 0x30;
if ((*cr_lcd & 0x30) == (*cr_lcd_oth & 0x30)) {
/* avoid being connected to both crtcs */
*cr_lcd_oth &= ~0x30;
NVWriteVgaCrtc(dev, head ^ 1,
NV_CIO_CRE_LCD__INDEX,
*cr_lcd_oth);
}
}
}
}
}
static void nv04_dfp_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index];
struct nv04_crtc_reg *savep = &dev_priv->saved_reg.crtc_reg[nv_crtc->index];
struct nouveau_connector *nv_connector = nouveau_crtc_connector_get(nv_crtc);
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct drm_display_mode *output_mode = &nv_encoder->mode;
uint32_t mode_ratio, panel_ratio;
NV_DEBUG_KMS(dev, "Output mode on CRTC %d:\n", nv_crtc->index);
drm_mode_debug_printmodeline(output_mode);
/* Initialize the FP registers in this CRTC. */
regp->fp_horiz_regs[FP_DISPLAY_END] = output_mode->hdisplay - 1;
regp->fp_horiz_regs[FP_TOTAL] = output_mode->htotal - 1;
if (!nv_gf4_disp_arch(dev) ||
(output_mode->hsync_start - output_mode->hdisplay) >=
dev_priv->vbios.digital_min_front_porch)
regp->fp_horiz_regs[FP_CRTC] = output_mode->hdisplay;
else
regp->fp_horiz_regs[FP_CRTC] = output_mode->hsync_start - dev_priv->vbios.digital_min_front_porch - 1;
regp->fp_horiz_regs[FP_SYNC_START] = output_mode->hsync_start - 1;
regp->fp_horiz_regs[FP_SYNC_END] = output_mode->hsync_end - 1;
regp->fp_horiz_regs[FP_VALID_START] = output_mode->hskew;
regp->fp_horiz_regs[FP_VALID_END] = output_mode->hdisplay - 1;
regp->fp_vert_regs[FP_DISPLAY_END] = output_mode->vdisplay - 1;
regp->fp_vert_regs[FP_TOTAL] = output_mode->vtotal - 1;
regp->fp_vert_regs[FP_CRTC] = output_mode->vtotal - 5 - 1;
regp->fp_vert_regs[FP_SYNC_START] = output_mode->vsync_start - 1;
regp->fp_vert_regs[FP_SYNC_END] = output_mode->vsync_end - 1;
regp->fp_vert_regs[FP_VALID_START] = 0;
regp->fp_vert_regs[FP_VALID_END] = output_mode->vdisplay - 1;
/* bit26: a bit seen on some g7x, no as yet discernable purpose */
regp->fp_control = NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
(savep->fp_control & (1 << 26 | NV_PRAMDAC_FP_TG_CONTROL_READ_PROG));
/* Deal with vsync/hsync polarity */
/* LVDS screens do set this, but modes with +ve syncs are very rare */
if (output_mode->flags & DRM_MODE_FLAG_PVSYNC)
regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS;
if (output_mode->flags & DRM_MODE_FLAG_PHSYNC)
regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS;
/* panel scaling first, as native would get set otherwise */
if (nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
nv_connector->scaling_mode == DRM_MODE_SCALE_CENTER) /* panel handles it */
regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_CENTER;
else if (adjusted_mode->hdisplay == output_mode->hdisplay &&
adjusted_mode->vdisplay == output_mode->vdisplay) /* native mode */
regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_NATIVE;
else /* gpu needs to scale */
regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_SCALE;
if (nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) & NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT)
regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12;
if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP &&
output_mode->clock > 165000)
regp->fp_control |= (2 << 24);
if (nv_encoder->dcb->type == OUTPUT_LVDS) {
bool duallink, dummy;
nouveau_bios_parse_lvds_table(dev, nv_connector->native_mode->
clock, &duallink, &dummy);
if (duallink)
regp->fp_control |= (8 << 28);
} else
if (output_mode->clock > 165000)
regp->fp_control |= (8 << 28);
regp->fp_debug_0 = NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND |
NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND |
NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR |
NV_PRAMDAC_FP_DEBUG_0_XINTERP_BILINEAR |
NV_RAMDAC_FP_DEBUG_0_TMDS_ENABLED |
NV_PRAMDAC_FP_DEBUG_0_YSCALE_ENABLE |
NV_PRAMDAC_FP_DEBUG_0_XSCALE_ENABLE;
/* We want automatic scaling */
regp->fp_debug_1 = 0;
/* This can override HTOTAL and VTOTAL */
regp->fp_debug_2 = 0;
/* Use 20.12 fixed point format to avoid floats */
mode_ratio = (1 << 12) * adjusted_mode->hdisplay / adjusted_mode->vdisplay;
panel_ratio = (1 << 12) * output_mode->hdisplay / output_mode->vdisplay;
/* if ratios are equal, SCALE_ASPECT will automatically (and correctly)
* get treated the same as SCALE_FULLSCREEN */
if (nv_connector->scaling_mode == DRM_MODE_SCALE_ASPECT &&
mode_ratio != panel_ratio) {
uint32_t diff, scale;
bool divide_by_2 = nv_gf4_disp_arch(dev);
if (mode_ratio < panel_ratio) {
/* vertical needs to expand to glass size (automatic)
* horizontal needs to be scaled at vertical scale factor
* to maintain aspect */
scale = (1 << 12) * adjusted_mode->vdisplay / output_mode->vdisplay;
regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
/* restrict area of screen used, horizontally */
diff = output_mode->hdisplay -
output_mode->vdisplay * mode_ratio / (1 << 12);
regp->fp_horiz_regs[FP_VALID_START] += diff / 2;
regp->fp_horiz_regs[FP_VALID_END] -= diff / 2;
}
if (mode_ratio > panel_ratio) {
/* horizontal needs to expand to glass size (automatic)
* vertical needs to be scaled at horizontal scale factor
* to maintain aspect */
scale = (1 << 12) * adjusted_mode->hdisplay / output_mode->hdisplay;
regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
/* restrict area of screen used, vertically */
diff = output_mode->vdisplay -
(1 << 12) * output_mode->hdisplay / mode_ratio;
regp->fp_vert_regs[FP_VALID_START] += diff / 2;
regp->fp_vert_regs[FP_VALID_END] -= diff / 2;
}
}
/* Output property. */
if (nv_connector->use_dithering) {
if (dev_priv->chipset == 0x11)
regp->dither = savep->dither | 0x00010000;
else {
int i;
regp->dither = savep->dither | 0x00000001;
for (i = 0; i < 3; i++) {
regp->dither_regs[i] = 0xe4e4e4e4;
regp->dither_regs[i + 3] = 0x44444444;
}
}
} else {
if (dev_priv->chipset != 0x11) {
/* reset them */
int i;
for (i = 0; i < 3; i++) {
regp->dither_regs[i] = savep->dither_regs[i];
regp->dither_regs[i + 3] = savep->dither_regs[i + 3];
}
}
regp->dither = savep->dither;
}
regp->fp_margin_color = 0;
}
static void nv04_dfp_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct drm_encoder_helper_funcs *helper = encoder->helper_private;
struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct dcb_entry *dcbe = nv_encoder->dcb;
int head = nouveau_crtc(encoder->crtc)->index;
if (dcbe->type == OUTPUT_TMDS)
run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
else if (dcbe->type == OUTPUT_LVDS)
call_lvds_script(dev, dcbe, head, LVDS_RESET, nv_encoder->mode.clock);
/* update fp_control state for any changes made by scripts,
* so correct value is written at DPMS on */
dev_priv->mode_reg.crtc_reg[head].fp_control =
NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
/* This could use refinement for flatpanels, but it should work this way */
if (dev_priv->chipset < 0x44)
NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0xf0000000);
else
NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
/* Init external transmitters */
if (get_tmds_slave(encoder))
get_slave_funcs(get_tmds_slave(encoder))->mode_set(
encoder, &nv_encoder->mode, &nv_encoder->mode);
helper->dpms(encoder, DRM_MODE_DPMS_ON);
NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static inline bool is_powersaving_dpms(int mode)
{
return (mode != DRM_MODE_DPMS_ON);
}
static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct drm_crtc *crtc = encoder->crtc;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
bool was_powersaving = is_powersaving_dpms(nv_encoder->last_dpms);
if (nv_encoder->last_dpms == mode)
return;
nv_encoder->last_dpms = mode;
NV_INFO(dev, "Setting dpms mode %d on lvds encoder (output %d)\n",
mode, nv_encoder->dcb->index);
if (was_powersaving && is_powersaving_dpms(mode))
return;
if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
/* when removing an output, crtc may not be set, but PANEL_OFF
* must still be run
*/
int head = crtc ? nouveau_crtc(crtc)->index :
nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
if (mode == DRM_MODE_DPMS_ON) {
if (!nv_connector->native_mode) {
NV_ERROR(dev, "Not turning on LVDS without native mode\n");
return;
}
call_lvds_script(dev, nv_encoder->dcb, head,
LVDS_PANEL_ON, nv_connector->native_mode->clock);
} else
/* pxclk of 0 is fine for PANEL_OFF, and for a
* disconnected LVDS encoder there is no native_mode
*/
call_lvds_script(dev, nv_encoder->dcb, head,
LVDS_PANEL_OFF, 0);
}
nv04_dfp_update_fp_control(encoder, mode);
if (mode == DRM_MODE_DPMS_ON)
nv04_dfp_prepare_sel_clk(dev, nv_encoder, nouveau_crtc(crtc)->index);
else {
dev_priv->mode_reg.sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK);
dev_priv->mode_reg.sel_clk &= ~0xf0;
}
NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, dev_priv->mode_reg.sel_clk);
}
static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
if (nv_encoder->last_dpms == mode)
return;
nv_encoder->last_dpms = mode;
NV_INFO(dev, "Setting dpms mode %d on tmds encoder (output %d)\n",
mode, nv_encoder->dcb->index);
nv04_dfp_update_fp_control(encoder, mode);
}
static void nv04_dfp_save(struct drm_encoder *encoder)
{
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct drm_device *dev = encoder->dev;
if (nv_two_heads(dev))
nv_encoder->restore.head =
nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
}
static void nv04_dfp_restore(struct drm_encoder *encoder)
{
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
struct drm_device *dev = encoder->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
int head = nv_encoder->restore.head;
if (nv_encoder->dcb->type == OUTPUT_LVDS) {
struct drm_display_mode *native_mode = nouveau_encoder_connector_get(nv_encoder)->native_mode;
if (native_mode)
call_lvds_script(dev, nv_encoder->dcb, head, LVDS_PANEL_ON,
native_mode->clock);
else
NV_ERROR(dev, "Not restoring LVDS without native mode\n");
} else if (nv_encoder->dcb->type == OUTPUT_TMDS) {
int clock = nouveau_hw_pllvals_to_clk
(&dev_priv->saved_reg.crtc_reg[head].pllvals);
run_tmds_table(dev, nv_encoder->dcb, head, clock);
}
nv_encoder->last_dpms = NV_DPMS_CLEARED;
}
static void nv04_dfp_destroy(struct drm_encoder *encoder)
{
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
NV_DEBUG_KMS(encoder->dev, "\n");
if (get_slave_funcs(encoder))
get_slave_funcs(encoder)->destroy(encoder);
drm_encoder_cleanup(encoder);
kfree(nv_encoder);
}
static void nv04_tmds_slave_init(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
struct nouveau_i2c_chan *i2c = nouveau_i2c_find(dev, 2);
struct i2c_board_info info[] = {
{
.type = "sil164",
.addr = (dcb->tmdsconf.slave_addr == 0x7 ? 0x3a : 0x38),
.platform_data = &(struct sil164_encoder_params) {
SIL164_INPUT_EDGE_RISING
}
},
{ }
};
int type;
if (!nv_gf4_disp_arch(dev) || !i2c ||
get_tmds_slave(encoder))
return;
type = nouveau_i2c_identify(dev, "TMDS transmitter", info, 2);
if (type < 0)
return;
drm_i2c_encoder_init(dev, to_encoder_slave(encoder),
&i2c->adapter, &info[type]);
}
static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
.dpms = nv04_lvds_dpms,
.save = nv04_dfp_save,
.restore = nv04_dfp_restore,
.mode_fixup = nv04_dfp_mode_fixup,
.prepare = nv04_dfp_prepare,
.commit = nv04_dfp_commit,
.mode_set = nv04_dfp_mode_set,
.detect = NULL,
};
static const struct drm_encoder_helper_funcs nv04_tmds_helper_funcs = {
.dpms = nv04_tmds_dpms,
.save = nv04_dfp_save,
.restore = nv04_dfp_restore,
.mode_fixup = nv04_dfp_mode_fixup,
.prepare = nv04_dfp_prepare,
.commit = nv04_dfp_commit,
.mode_set = nv04_dfp_mode_set,
.detect = NULL,
};
static const struct drm_encoder_funcs nv04_dfp_funcs = {
.destroy = nv04_dfp_destroy,
};
int
nv04_dfp_create(struct drm_connector *connector, struct dcb_entry *entry)
{
const struct drm_encoder_helper_funcs *helper;
struct nouveau_encoder *nv_encoder = NULL;
struct drm_encoder *encoder;
int type;
switch (entry->type) {
case OUTPUT_TMDS:
type = DRM_MODE_ENCODER_TMDS;
helper = &nv04_tmds_helper_funcs;
break;
case OUTPUT_LVDS:
type = DRM_MODE_ENCODER_LVDS;
helper = &nv04_lvds_helper_funcs;
break;
default:
return -EINVAL;
}
nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
if (!nv_encoder)
return -ENOMEM;
encoder = to_drm_encoder(nv_encoder);
nv_encoder->dcb = entry;
nv_encoder->or = ffs(entry->or) - 1;
drm_encoder_init(connector->dev, encoder, &nv04_dfp_funcs, type);
drm_encoder_helper_add(encoder, helper);
encoder->possible_crtcs = entry->heads;
encoder->possible_clones = 0;
if (entry->type == OUTPUT_TMDS &&
entry->location != DCB_LOC_ON_CHIP)
nv04_tmds_slave_init(encoder);
drm_mode_connector_attach_encoder(connector, encoder);
return 0;
}