linux/drivers/net/wireless/ath/wil6210/wil6210.h

698 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __WIL6210_H__
#define __WIL6210_H__
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/cfg80211.h>
#include <linux/timex.h>
#include "wil_platform.h"
extern bool no_fw_recovery;
extern unsigned int mtu_max;
extern int agg_wsize;
#define WIL_NAME "wil6210"
#define WIL_FW_NAME "wil6210.fw"
#define WIL_MAX_BUS_REQUEST_KBPS 800000 /* ~6.1Gbps */
/**
* extract bits [@b0:@b1] (inclusive) from the value @x
* it should be @b0 <= @b1, or result is incorrect
*/
static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
{
return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1);
}
#define WIL6210_MEM_SIZE (2*1024*1024UL)
#define WIL_RX_RING_SIZE_ORDER_DEFAULT (9)
#define WIL_TX_RING_SIZE_ORDER_DEFAULT (9)
/* limit ring size in range [32..32k] */
#define WIL_RING_SIZE_ORDER_MIN (5)
#define WIL_RING_SIZE_ORDER_MAX (15)
#define WIL6210_MAX_TX_RINGS (24) /* HW limit */
#define WIL6210_MAX_CID (8) /* HW limit */
#define WIL6210_NAPI_BUDGET (16) /* arbitrary */
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
#define WIL_MAX_AMPDU_SIZE (64 * 1024) /* FW/HW limit */
#define WIL_MAX_AGG_WSIZE (32) /* FW/HW limit */
/* Hardware offload block adds the following:
* 26 bytes - 3-address QoS data header
* 8 bytes - IV + EIV (for GCMP)
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
* 8 bytes - SNAP
* 16 bytes - MIC (for GCMP)
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
* 4 bytes - CRC
*/
#define WIL_MAX_MPDU_OVERHEAD (62)
/* Calculate MAC buffer size for the firmware. It includes all overhead,
* as it will go over the air, and need to be 8 byte aligned
*/
static inline u32 wil_mtu2macbuf(u32 mtu)
{
return ALIGN(mtu + WIL_MAX_MPDU_OVERHEAD, 8);
}
/* MTU for Ethernet need to take into account 8-byte SNAP header
* to be added when encapsulating Ethernet frame into 802.11
*/
#define WIL_MAX_ETH_MTU (IEEE80211_MAX_DATA_LEN_DMG - 8)
/* Max supported by wil6210 value for interrupt threshold is 5sec. */
#define WIL6210_ITR_TRSH_MAX (5000000)
#define WIL6210_ITR_TRSH_DEFAULT (300) /* usec */
#define WIL6210_FW_RECOVERY_RETRIES (5) /* try to recover this many times */
#define WIL6210_FW_RECOVERY_TO msecs_to_jiffies(5000)
#define WIL6210_SCAN_TO msecs_to_jiffies(10000)
/* Hardware definitions begin */
/*
* Mapping
* RGF File | Host addr | FW addr
* | |
* user_rgf | 0x000000 | 0x880000
* dma_rgf | 0x001000 | 0x881000
* pcie_rgf | 0x002000 | 0x882000
* | |
*/
/* Where various structures placed in host address space */
#define WIL6210_FW_HOST_OFF (0x880000UL)
#define HOSTADDR(fwaddr) (fwaddr - WIL6210_FW_HOST_OFF)
/*
* Interrupt control registers block
*
* each interrupt controlled by the same bit in all registers
*/
struct RGF_ICR {
u32 ICC; /* Cause Control, RW: 0 - W1C, 1 - COR */
u32 ICR; /* Cause, W1C/COR depending on ICC */
u32 ICM; /* Cause masked (ICR & ~IMV), W1C/COR depending on ICC */
u32 ICS; /* Cause Set, WO */
u32 IMV; /* Mask, RW+S/C */
u32 IMS; /* Mask Set, write 1 to set */
u32 IMC; /* Mask Clear, write 1 to clear */
} __packed;
/* registers - FW addresses */
#define RGF_USER_USAGE_1 (0x880004)
#define RGF_USER_USAGE_6 (0x880018)
#define RGF_USER_HW_MACHINE_STATE (0x8801dc)
#define HW_MACHINE_BOOT_DONE (0x3fffffd)
#define RGF_USER_USER_CPU_0 (0x8801e0)
#define BIT_USER_USER_CPU_MAN_RST BIT(1) /* user_cpu_man_rst */
#define RGF_USER_MAC_CPU_0 (0x8801fc)
#define BIT_USER_MAC_CPU_MAN_RST BIT(1) /* mac_cpu_man_rst */
#define RGF_USER_USER_SCRATCH_PAD (0x8802bc)
#define RGF_USER_FW_REV_ID (0x880a8c) /* chip revision */
#define RGF_USER_CLKS_CTL_0 (0x880abc)
#define BIT_USER_CLKS_CAR_AHB_SW_SEL BIT(1) /* ref clk/PLL */
#define BIT_USER_CLKS_RST_PWGD BIT(11) /* reset on "power good" */
#define RGF_USER_CLKS_CTL_SW_RST_VEC_0 (0x880b04)
#define RGF_USER_CLKS_CTL_SW_RST_VEC_1 (0x880b08)
#define RGF_USER_CLKS_CTL_SW_RST_VEC_2 (0x880b0c)
#define RGF_USER_CLKS_CTL_SW_RST_VEC_3 (0x880b10)
#define RGF_USER_CLKS_CTL_SW_RST_MASK_0 (0x880b14)
#define BIT_HPAL_PERST_FROM_PAD BIT(6)
#define BIT_CAR_PERST_RST BIT(7)
#define RGF_USER_USER_ICR (0x880b4c) /* struct RGF_ICR */
#define BIT_USER_USER_ICR_SW_INT_2 BIT(18)
#define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0 (0x880c18)
#define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1 (0x880c2c)
#define RGF_USER_SPARROW_M_4 (0x880c50) /* Sparrow */
#define BIT_SPARROW_M_4_SEL_SLEEP_OR_REF BIT(2)
#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */
#define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0)
#define BIT_DMA_EP_TX_ICR_TX_DONE_N(n) BIT(n+1) /* n = [0..23] */
#define RGF_DMA_EP_RX_ICR (0x881bd0) /* struct RGF_ICR */
#define BIT_DMA_EP_RX_ICR_RX_DONE BIT(0)
#define BIT_DMA_EP_RX_ICR_RX_HTRSH BIT(1)
#define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */
#define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0)
#define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1)
#define BIT_DMA_EP_MISC_ICR_FW_INT(n) BIT(28+n) /* n = [0..3] */
/* Interrupt moderation control */
#define RGF_DMA_ITR_CNT_TRSH (0x881c5c)
#define RGF_DMA_ITR_CNT_DATA (0x881c60)
#define RGF_DMA_ITR_CNT_CRL (0x881c64)
#define BIT_DMA_ITR_CNT_CRL_EN BIT(0)
#define BIT_DMA_ITR_CNT_CRL_EXT_TICK BIT(1)
#define BIT_DMA_ITR_CNT_CRL_FOREVER BIT(2)
#define BIT_DMA_ITR_CNT_CRL_CLR BIT(3)
#define BIT_DMA_ITR_CNT_CRL_REACH_TRSH BIT(4)
#define RGF_DMA_PSEUDO_CAUSE (0x881c68)
#define RGF_DMA_PSEUDO_CAUSE_MASK_SW (0x881c6c)
#define RGF_DMA_PSEUDO_CAUSE_MASK_FW (0x881c70)
#define BIT_DMA_PSEUDO_CAUSE_RX BIT(0)
#define BIT_DMA_PSEUDO_CAUSE_TX BIT(1)
#define BIT_DMA_PSEUDO_CAUSE_MISC BIT(2)
#define RGF_HP_CTRL (0x88265c)
#define RGF_PCIE_LOS_COUNTER_CTL (0x882dc4)
/* MAC timer, usec, for packet lifetime */
#define RGF_MAC_MTRL_COUNTER_0 (0x886aa8)
#define RGF_CAF_ICR (0x88946c) /* struct RGF_ICR */
#define RGF_CAF_OSC_CONTROL (0x88afa4)
#define BIT_CAF_OSC_XTAL_EN BIT(0)
#define RGF_CAF_PLL_LOCK_STATUS (0x88afec)
#define BIT_CAF_OSC_DIG_XTAL_STABLE BIT(0)
#define RGF_USER_JTAG_DEV_ID (0x880b34) /* device ID */
#define JTAG_DEV_ID_MARLON_B0 (0x0612072f)
#define JTAG_DEV_ID_SPARROW_A0 (0x0632072f)
#define JTAG_DEV_ID_SPARROW_A1 (0x1632072f)
#define JTAG_DEV_ID_SPARROW_B0 (0x2632072f)
enum {
HW_VER_UNKNOWN,
HW_VER_MARLON_B0, /* JTAG_DEV_ID_MARLON_B0 */
HW_VER_SPARROW_A0, /* JTAG_DEV_ID_SPARROW_A0 */
HW_VER_SPARROW_A1, /* JTAG_DEV_ID_SPARROW_A1 */
HW_VER_SPARROW_B0, /* JTAG_DEV_ID_SPARROW_B0 */
};
/* popular locations */
#define HOST_MBOX HOSTADDR(RGF_USER_USER_SCRATCH_PAD)
#define HOST_SW_INT (HOSTADDR(RGF_USER_USER_ICR) + \
offsetof(struct RGF_ICR, ICS))
#define SW_INT_MBOX BIT_USER_USER_ICR_SW_INT_2
/* ISR register bits */
#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT(0)
#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT(1)
#define ISR_MISC_FW_ERROR BIT_DMA_EP_MISC_ICR_FW_INT(3)
/* Hardware definitions end */
struct fw_map {
u32 from; /* linker address - from, inclusive */
u32 to; /* linker address - to, exclusive */
u32 host; /* PCI/Host address - BAR0 + 0x880000 */
const char *name; /* for debugfs */
};
/* array size should be in sync with actual definition in the wmi.c */
extern const struct fw_map fw_mapping[7];
/**
* mk_cidxtid - construct @cidxtid field
* @cid: CID value
* @tid: TID value
*
* @cidxtid field encoded as bits 0..3 - CID; 4..7 - TID
*/
static inline u8 mk_cidxtid(u8 cid, u8 tid)
{
return ((tid & 0xf) << 4) | (cid & 0xf);
}
/**
* parse_cidxtid - parse @cidxtid field
* @cid: store CID value here
* @tid: store TID value here
*
* @cidxtid field encoded as bits 0..3 - CID; 4..7 - TID
*/
static inline void parse_cidxtid(u8 cidxtid, u8 *cid, u8 *tid)
{
*cid = cidxtid & 0xf;
*tid = (cidxtid >> 4) & 0xf;
}
struct wil6210_mbox_ring {
u32 base;
u16 entry_size; /* max. size of mbox entry, incl. all headers */
u16 size;
u32 tail;
u32 head;
} __packed;
struct wil6210_mbox_ring_desc {
__le32 sync;
__le32 addr;
} __packed;
/* at HOST_OFF_WIL6210_MBOX_CTL */
struct wil6210_mbox_ctl {
struct wil6210_mbox_ring tx;
struct wil6210_mbox_ring rx;
} __packed;
struct wil6210_mbox_hdr {
__le16 seq;
__le16 len; /* payload, bytes after this header */
__le16 type;
u8 flags;
u8 reserved;
} __packed;
#define WIL_MBOX_HDR_TYPE_WMI (0)
/* max. value for wil6210_mbox_hdr.len */
#define MAX_MBOXITEM_SIZE (240)
/**
* struct wil6210_mbox_hdr_wmi - WMI header
*
* @mid: MAC ID
* 00 - default, created by FW
* 01..0f - WiFi ports, driver to create
* 10..fe - debug
* ff - broadcast
* @id: command/event ID
* @timestamp: FW fills for events, free-running msec timer
*/
struct wil6210_mbox_hdr_wmi {
u8 mid;
u8 reserved;
__le16 id;
__le32 timestamp;
} __packed;
struct pending_wmi_event {
struct list_head list;
struct {
struct wil6210_mbox_hdr hdr;
struct wil6210_mbox_hdr_wmi wmi;
u8 data[0];
} __packed event;
};
enum { /* for wil_ctx.mapped_as */
wil_mapped_as_none = 0,
wil_mapped_as_single = 1,
wil_mapped_as_page = 2,
};
/**
* struct wil_ctx - software context for Vring descriptor
*/
struct wil_ctx {
struct sk_buff *skb;
u8 nr_frags;
u8 mapped_as;
};
union vring_desc;
struct vring {
dma_addr_t pa;
volatile union vring_desc *va; /* vring_desc[size], WriteBack by DMA */
u16 size; /* number of vring_desc elements */
u32 swtail;
u32 swhead;
u32 hwtail; /* write here to inform hw */
struct wil_ctx *ctx; /* ctx[size] - software context */
};
/**
* Additional data for Tx Vring
*/
struct vring_tx_data {
int enabled;
cycles_t idle, last_idle, begin;
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
u8 agg_wsize; /* agreed aggregation window, 0 - no agg */
u16 agg_timeout;
u8 agg_amsdu;
bool addba_in_progress; /* if set, agg_xxx is for request in progress */
};
enum { /* for wil6210_priv.status */
wil_status_fwready = 0,
wil_status_fwconnecting,
wil_status_fwconnected,
wil_status_dontscan,
wil_status_reset_done,
wil_status_irqen, /* FIXME: interrupts enabled - for debug */
wil_status_napi_en, /* NAPI enabled protected by wil->mutex */
wil_status_last /* keep last */
};
struct pci_dev;
/**
* struct tid_ampdu_rx - TID aggregation information (Rx).
*
* @reorder_buf: buffer to reorder incoming aggregated MPDUs
* @reorder_time: jiffies when skb was added
* @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
* @reorder_timer: releases expired frames from the reorder buffer.
* @last_rx: jiffies of last rx activity
* @head_seq_num: head sequence number in reordering buffer.
* @stored_mpdu_num: number of MPDUs in reordering buffer
* @ssn: Starting Sequence Number expected to be aggregated.
* @buf_size: buffer size for incoming A-MPDUs
* @timeout: reset timer value (in TUs).
* @dialog_token: dialog token for aggregation session
* @rcu_head: RCU head used for freeing this struct
*
* This structure's lifetime is managed by RCU, assignments to
* the array holding it must hold the aggregation mutex.
*
*/
struct wil_tid_ampdu_rx {
struct sk_buff **reorder_buf;
unsigned long *reorder_time;
struct timer_list session_timer;
struct timer_list reorder_timer;
unsigned long last_rx;
u16 head_seq_num;
u16 stored_mpdu_num;
u16 ssn;
u16 buf_size;
u16 timeout;
u16 ssn_last_drop;
u8 dialog_token;
bool first_time; /* is it 1-st time this buffer used? */
};
enum wil_sta_status {
wil_sta_unused = 0,
wil_sta_conn_pending = 1,
wil_sta_connected = 2,
};
#define WIL_STA_TID_NUM (16)
struct wil_net_stats {
unsigned long rx_packets;
unsigned long tx_packets;
unsigned long rx_bytes;
unsigned long tx_bytes;
unsigned long tx_errors;
unsigned long rx_dropped;
u16 last_mcs_rx;
};
/**
* struct wil_sta_info - data for peer
*
* Peer identified by its CID (connection ID)
* NIC performs beam forming for each peer;
* if no beam forming done, frame exchange is not
* possible.
*/
struct wil_sta_info {
u8 addr[ETH_ALEN];
enum wil_sta_status status;
struct wil_net_stats stats;
bool data_port_open; /* can send any data, not only EAPOL */
/* Rx BACK */
struct wil_tid_ampdu_rx *tid_rx[WIL_STA_TID_NUM];
spinlock_t tid_rx_lock; /* guarding tid_rx array */
unsigned long tid_rx_timer_expired[BITS_TO_LONGS(WIL_STA_TID_NUM)];
unsigned long tid_rx_stop_requested[BITS_TO_LONGS(WIL_STA_TID_NUM)];
};
enum {
fw_recovery_idle = 0,
fw_recovery_pending = 1,
fw_recovery_running = 2,
};
enum {
hw_capability_reset_v2 = 0,
hw_capability_last
};
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
struct wil_back_rx {
struct list_head list;
/* request params, converted to CPU byte order - what we asked for */
u8 cidxtid;
u8 dialog_token;
u16 ba_param_set;
u16 ba_timeout;
u16 ba_seq_ctrl;
};
struct wil_back_tx {
struct list_head list;
/* request params, converted to CPU byte order - what we asked for */
u8 ringid;
u8 agg_wsize;
u16 agg_timeout;
};
struct wil6210_priv {
struct pci_dev *pdev;
int n_msi;
struct wireless_dev *wdev;
void __iomem *csr;
DECLARE_BITMAP(status, wil_status_last);
u32 fw_version;
u32 hw_version;
const char *hw_name;
DECLARE_BITMAP(hw_capabilities, hw_capability_last);
u8 n_mids; /* number of additional MIDs as reported by FW */
u32 recovery_count; /* num of FW recovery attempts in a short time */
u32 recovery_state; /* FW recovery state machine */
unsigned long last_fw_recovery; /* jiffies of last fw recovery */
wait_queue_head_t wq; /* for all wait_event() use */
/* profile */
u32 monitor_flags;
u32 secure_pcp; /* create secure PCP? */
int sinfo_gen;
u32 itr_trsh;
/* cached ISR registers */
u32 isr_misc;
/* mailbox related */
struct mutex wmi_mutex;
struct wil6210_mbox_ctl mbox_ctl;
struct completion wmi_ready;
struct completion wmi_call;
u16 wmi_seq;
u16 reply_id; /**< wait for this WMI event */
void *reply_buf;
u16 reply_size;
struct workqueue_struct *wmi_wq; /* for deferred calls */
struct work_struct wmi_event_worker;
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
struct workqueue_struct *wq_service;
struct work_struct connect_worker;
struct work_struct disconnect_worker;
struct work_struct fw_error_worker; /* for FW error recovery */
struct timer_list connect_timer;
struct timer_list scan_timer; /* detect scan timeout */
int pending_connect_cid;
struct list_head pending_wmi_ev;
/*
* protect pending_wmi_ev
* - fill in IRQ from wil6210_irq_misc,
* - consumed in thread by wmi_event_worker
*/
spinlock_t wmi_ev_lock;
struct napi_struct napi_rx;
struct napi_struct napi_tx;
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
/* BACK */
struct list_head back_rx_pending;
struct mutex back_rx_mutex; /* protect @back_rx_pending */
struct work_struct back_rx_worker;
struct list_head back_tx_pending;
struct mutex back_tx_mutex; /* protect @back_tx_pending */
struct work_struct back_tx_worker;
/* DMA related */
struct vring vring_rx;
struct vring vring_tx[WIL6210_MAX_TX_RINGS];
struct vring_tx_data vring_tx_data[WIL6210_MAX_TX_RINGS];
u8 vring2cid_tid[WIL6210_MAX_TX_RINGS][2]; /* [0] - CID, [1] - TID */
struct wil_sta_info sta[WIL6210_MAX_CID];
/* scan */
struct cfg80211_scan_request *scan_request;
struct mutex mutex; /* for wil6210_priv access in wil_{up|down} */
/* statistics */
atomic_t isr_count_rx, isr_count_tx;
/* debugfs */
struct dentry *debug;
struct debugfs_blob_wrapper blobs[ARRAY_SIZE(fw_mapping)];
void *platform_handle;
struct wil_platform_ops platform_ops;
};
#define wil_to_wiphy(i) (i->wdev->wiphy)
#define wil_to_dev(i) (wiphy_dev(wil_to_wiphy(i)))
#define wiphy_to_wil(w) (struct wil6210_priv *)(wiphy_priv(w))
#define wil_to_wdev(i) (i->wdev)
#define wdev_to_wil(w) (struct wil6210_priv *)(wdev_priv(w))
#define wil_to_ndev(i) (wil_to_wdev(i)->netdev)
#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr))
__printf(2, 3)
Merge tag 'master-2014-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 19:19:05 +00:00
void wil_dbg_trace(struct wil6210_priv *wil, const char *fmt, ...);
__printf(2, 3)
Merge tag 'master-2014-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 19:19:05 +00:00
void wil_err(struct wil6210_priv *wil, const char *fmt, ...);
__printf(2, 3)
void wil_err_ratelimited(struct wil6210_priv *wil, const char *fmt, ...);
__printf(2, 3)
Merge tag 'master-2014-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 19:19:05 +00:00
void wil_info(struct wil6210_priv *wil, const char *fmt, ...);
#define wil_dbg(wil, fmt, arg...) do { \
netdev_dbg(wil_to_ndev(wil), fmt, ##arg); \
wil_dbg_trace(wil, fmt, ##arg); \
} while (0)
#define wil_dbg_irq(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg)
#define wil_dbg_txrx(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg)
#define wil_dbg_wmi(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg)
#define wil_dbg_misc(wil, fmt, arg...) wil_dbg(wil, "DBG[MISC]" fmt, ##arg)
#if defined(CONFIG_DYNAMIC_DEBUG)
#define wil_hex_dump_txrx(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
print_hex_dump_debug("DBG[TXRX]" prefix_str,\
prefix_type, rowsize, \
groupsize, buf, len, ascii)
#define wil_hex_dump_wmi(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
print_hex_dump_debug("DBG[ WMI]" prefix_str,\
prefix_type, rowsize, \
groupsize, buf, len, ascii)
fixup! wil6210: fix usage of print_hex_dump_debug Use empty inline functions instead of empty #define. Fix for "unused variable" as reported below: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 167bf96dd87d2a8360cb9e9783006876dac4f579 commit: 871d8c4bbb0f23c29a21b63b1801071766f69b51 [45/62] wil6210: fix usage of print_hex_dump_debug config: i386-allyesconfig reproduce: git checkout 871d8c4bbb0f23c29a21b63b1801071766f69b51 make ARCH=i386 allyesconfig make ARCH=i386 All warnings: drivers/net/wireless/ath/wil6210/wmi.c: In function 'wmi_evt_rx_mgmt': >> drivers/net/wireless/ath/wil6210/wmi.c:341:10: warning: unused variable 'ie_len' [-Wunused-variable] size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, ^ >> drivers/net/wireless/ath/wil6210/wmi.c:340:13: warning: unused variable 'ie_buf' [-Wunused-variable] const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; ^ vim +/ie_len +341 drivers/net/wireless/ath/wil6210/wmi.c 2be7d22f Vladimir Kondratiev 2012-12-20 334 2be7d22f Vladimir Kondratiev 2012-12-20 335 if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { 2be7d22f Vladimir Kondratiev 2012-12-20 336 struct cfg80211_bss *bss; 8eea944a Vladimir Kondratiev 2014-06-16 337 u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); 8eea944a Vladimir Kondratiev 2014-06-16 338 u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); 8eea944a Vladimir Kondratiev 2014-06-16 339 u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); 8eea944a Vladimir Kondratiev 2014-06-16 340 const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; 8eea944a Vladimir Kondratiev 2014-06-16 341 size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, 8eea944a Vladimir Kondratiev 2014-06-16 342 u.beacon.variable); 8eea944a Vladimir Kondratiev 2014-06-16 343 wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); 8eea944a Vladimir Kondratiev 2014-06-16 344 wil_dbg_wmi(wil, "TSF : 0x%016llx\n", tsf); :::::: The code at line 341 was first introduced by commit :::::: 8eea944af0efcdba09dac1ad220c9bfa68293279 wil6210: print more info about BSS found Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-14 08:14:10 +00:00
#else /* defined(CONFIG_DYNAMIC_DEBUG) */
static inline
void wil_hex_dump_txrx(const char *prefix_str, int prefix_type, int rowsize,
int groupsize, const void *buf, size_t len, bool ascii)
{
}
static inline
void wil_hex_dump_wmi(const char *prefix_str, int prefix_type, int rowsize,
int groupsize, const void *buf, size_t len, bool ascii)
{
}
#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
size_t count);
void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
size_t count);
void *wil_if_alloc(struct device *dev, void __iomem *csr);
void wil_if_free(struct wil6210_priv *wil);
int wil_if_add(struct wil6210_priv *wil);
void wil_if_remove(struct wil6210_priv *wil);
int wil_priv_init(struct wil6210_priv *wil);
void wil_priv_deinit(struct wil6210_priv *wil);
int wil_reset(struct wil6210_priv *wil);
void wil_set_itr_trsh(struct wil6210_priv *wil);
void wil_fw_error_recovery(struct wil6210_priv *wil);
void wil_set_recovery_state(struct wil6210_priv *wil, int state);
void wil_link_on(struct wil6210_priv *wil);
void wil_link_off(struct wil6210_priv *wil);
int wil_up(struct wil6210_priv *wil);
wil6210: fix for oops while stopping interface When interface stopped while running intensive Rx traffic, the following oops observed: [89846.734683] Call trace: [89846.737117] [<ffffffc00083aa64>] dev_gro_receive+0xac/0x358 [89846.742674] [<ffffffc00083ae94>] napi_gro_receive+0x24/0xa4 [89846.748251] [<ffffffbffc1c2f88>] $x+0xec/0x1f8 [wil6210] wil_netif_rx_any [89846.753547] [<ffffffbffc1c4830>] $x+0x34/0x54 [wil6210] wil_release_reorder_frame [89846.758755] [<ffffffbffc1c48ac>] wil_release_reorder_frames+0x5c/0x78 [wil6210] [89846.766044] [<ffffffbffc1c4bf8>] wil_tid_ampdu_rx_free+0x20/0x48 [wil6210] [89846.772901] [<ffffffbffc1bedc8>] $x+0x190/0x1e8 [wil6210] [89846.778285] [<ffffffbffc1c0ed4>] wmi_event_worker+0x230/0x2f8 [wil6210] [89846.784865] [<ffffffc0000b0bc8>] process_one_work+0x278/0x3fc [89846.790591] [<ffffffc0000b1218>] worker_thread+0x200/0x330 [89846.796060] [<ffffffc0000b6664>] kthread+0xac/0xb8 [89846.800836] Code: b940c661 f9406a62 8b010041 f9400026 (f8636882) [89846.807008] ---[ end trace d6fdc17cd27d18f6 ]--- Reason is the following: when removing Rx vring (wil_netdev_ops.ndo_stop -> wil_stop -> wil_down -> __wil_down -> wil_rx_fini), Rx interrupt occurs. It trigger Rx NAPI, calling wil_rx_handle() that reaps (already cleaned) buffer, causing skb referring to garbage memory being set into reorder buffer. Then, network stack trying to access this buffer and fails. Prevent Rx NAPI from being scheduled if device going to stop. Bit wil_status_napi_en reflects NAPI enablement state, check it when triggering Rx NAPI. Testing shows that check for wil_status_napi_en sometimes gets negative, and new error message get printed - in this case kernel oops would be observed. Original oops is no more reproducible. This change requires also changes in the AP flows. Properly enable/disable NAPI for the AP. Make sure Rx VRING is disabled when resetting target. For this, promote __wil_up() and __wil_down() to the module scope, and use it in the relevant flows. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-10 13:34:50 +00:00
int __wil_up(struct wil6210_priv *wil);
int wil_down(struct wil6210_priv *wil);
wil6210: fix for oops while stopping interface When interface stopped while running intensive Rx traffic, the following oops observed: [89846.734683] Call trace: [89846.737117] [<ffffffc00083aa64>] dev_gro_receive+0xac/0x358 [89846.742674] [<ffffffc00083ae94>] napi_gro_receive+0x24/0xa4 [89846.748251] [<ffffffbffc1c2f88>] $x+0xec/0x1f8 [wil6210] wil_netif_rx_any [89846.753547] [<ffffffbffc1c4830>] $x+0x34/0x54 [wil6210] wil_release_reorder_frame [89846.758755] [<ffffffbffc1c48ac>] wil_release_reorder_frames+0x5c/0x78 [wil6210] [89846.766044] [<ffffffbffc1c4bf8>] wil_tid_ampdu_rx_free+0x20/0x48 [wil6210] [89846.772901] [<ffffffbffc1bedc8>] $x+0x190/0x1e8 [wil6210] [89846.778285] [<ffffffbffc1c0ed4>] wmi_event_worker+0x230/0x2f8 [wil6210] [89846.784865] [<ffffffc0000b0bc8>] process_one_work+0x278/0x3fc [89846.790591] [<ffffffc0000b1218>] worker_thread+0x200/0x330 [89846.796060] [<ffffffc0000b6664>] kthread+0xac/0xb8 [89846.800836] Code: b940c661 f9406a62 8b010041 f9400026 (f8636882) [89846.807008] ---[ end trace d6fdc17cd27d18f6 ]--- Reason is the following: when removing Rx vring (wil_netdev_ops.ndo_stop -> wil_stop -> wil_down -> __wil_down -> wil_rx_fini), Rx interrupt occurs. It trigger Rx NAPI, calling wil_rx_handle() that reaps (already cleaned) buffer, causing skb referring to garbage memory being set into reorder buffer. Then, network stack trying to access this buffer and fails. Prevent Rx NAPI from being scheduled if device going to stop. Bit wil_status_napi_en reflects NAPI enablement state, check it when triggering Rx NAPI. Testing shows that check for wil_status_napi_en sometimes gets negative, and new error message get printed - in this case kernel oops would be observed. Original oops is no more reproducible. This change requires also changes in the AP flows. Properly enable/disable NAPI for the AP. Make sure Rx VRING is disabled when resetting target. For this, promote __wil_up() and __wil_down() to the module scope, and use it in the relevant flows. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-10 13:34:50 +00:00
int __wil_down(struct wil6210_priv *wil);
void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
int wil_find_cid(struct wil6210_priv *wil, const u8 *mac);
void wil_set_ethtoolops(struct net_device *ndev);
void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr);
void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr);
int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
struct wil6210_mbox_hdr *hdr);
int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len);
void wmi_recv_cmd(struct wil6210_priv *wil);
int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
u16 reply_id, void *reply, u8 reply_size, int to_msec);
void wmi_event_worker(struct work_struct *work);
void wmi_event_flush(struct wil6210_priv *wil);
int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid);
int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid);
int wmi_set_channel(struct wil6210_priv *wil, int channel);
int wmi_get_channel(struct wil6210_priv *wil, int *channel);
int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
const void *mac_addr);
int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
const void *mac_addr, int key_len, const void *key);
int wmi_echo(struct wil6210_priv *wil);
int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
int wmi_rxon(struct wil6210_priv *wil, bool on);
int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason);
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
int wmi_addba(struct wil6210_priv *wil, u8 ringid, u8 size, u16 timeout);
int wmi_delba_tx(struct wil6210_priv *wil, u8 ringid, u16 reason);
int wmi_delba_rx(struct wil6210_priv *wil, u8 cidxtid, u16 reason);
wil6210: ADDBA/DELBA flows Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-23 07:47:03 +00:00
int wmi_addba_rx_resp(struct wil6210_priv *wil, u8 cid, u8 tid, u8 token,
u16 status, bool amsdu, u16 agg_wsize, u16 timeout);
int wil_addba_rx_request(struct wil6210_priv *wil, u8 cidxtid,
u8 dialog_token, __le16 ba_param_set,
__le16 ba_timeout, __le16 ba_seq_ctrl);
void wil_back_rx_worker(struct work_struct *work);
void wil_back_rx_flush(struct wil6210_priv *wil);
int wil_addba_tx_request(struct wil6210_priv *wil, u8 ringid, u16 wsize);
void wil_back_tx_worker(struct work_struct *work);
void wil_back_tx_flush(struct wil6210_priv *wil);
void wil6210_clear_irq(struct wil6210_priv *wil);
int wil6210_init_irq(struct wil6210_priv *wil, int irq);
void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
void wil_mask_irq(struct wil6210_priv *wil);
void wil_unmask_irq(struct wil6210_priv *wil);
wil6210: fix for oops while stopping interface When interface stopped while running intensive Rx traffic, the following oops observed: [89846.734683] Call trace: [89846.737117] [<ffffffc00083aa64>] dev_gro_receive+0xac/0x358 [89846.742674] [<ffffffc00083ae94>] napi_gro_receive+0x24/0xa4 [89846.748251] [<ffffffbffc1c2f88>] $x+0xec/0x1f8 [wil6210] wil_netif_rx_any [89846.753547] [<ffffffbffc1c4830>] $x+0x34/0x54 [wil6210] wil_release_reorder_frame [89846.758755] [<ffffffbffc1c48ac>] wil_release_reorder_frames+0x5c/0x78 [wil6210] [89846.766044] [<ffffffbffc1c4bf8>] wil_tid_ampdu_rx_free+0x20/0x48 [wil6210] [89846.772901] [<ffffffbffc1bedc8>] $x+0x190/0x1e8 [wil6210] [89846.778285] [<ffffffbffc1c0ed4>] wmi_event_worker+0x230/0x2f8 [wil6210] [89846.784865] [<ffffffc0000b0bc8>] process_one_work+0x278/0x3fc [89846.790591] [<ffffffc0000b1218>] worker_thread+0x200/0x330 [89846.796060] [<ffffffc0000b6664>] kthread+0xac/0xb8 [89846.800836] Code: b940c661 f9406a62 8b010041 f9400026 (f8636882) [89846.807008] ---[ end trace d6fdc17cd27d18f6 ]--- Reason is the following: when removing Rx vring (wil_netdev_ops.ndo_stop -> wil_stop -> wil_down -> __wil_down -> wil_rx_fini), Rx interrupt occurs. It trigger Rx NAPI, calling wil_rx_handle() that reaps (already cleaned) buffer, causing skb referring to garbage memory being set into reorder buffer. Then, network stack trying to access this buffer and fails. Prevent Rx NAPI from being scheduled if device going to stop. Bit wil_status_napi_en reflects NAPI enablement state, check it when triggering Rx NAPI. Testing shows that check for wil_status_napi_en sometimes gets negative, and new error message get printed - in this case kernel oops would be observed. Original oops is no more reproducible. This change requires also changes in the AP flows. Properly enable/disable NAPI for the AP. Make sure Rx VRING is disabled when resetting target. For this, promote __wil_up() and __wil_down() to the module scope, and use it in the relevant flows. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-10 13:34:50 +00:00
void wil_disable_irq(struct wil6210_priv *wil);
void wil_enable_irq(struct wil6210_priv *wil);
int wil_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
struct cfg80211_mgmt_tx_params *params,
u64 *cookie);
int wil6210_debugfs_init(struct wil6210_priv *wil);
void wil6210_debugfs_remove(struct wil6210_priv *wil);
int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
struct station_info *sinfo);
struct wireless_dev *wil_cfg80211_init(struct device *dev);
void wil_wdev_free(struct wil6210_priv *wil);
int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan);
int wmi_pcp_stop(struct wil6210_priv *wil);
void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
u16 reason_code, bool from_event);
int wil_rx_init(struct wil6210_priv *wil, u16 size);
void wil_rx_fini(struct wil6210_priv *wil);
/* TX API */
int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
int cid, int tid);
void wil_vring_fini_tx(struct wil6210_priv *wil, int id);
netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev);
int wil_tx_complete(struct wil6210_priv *wil, int ringid);
void wil6210_unmask_irq_tx(struct wil6210_priv *wil);
/* RX API */
void wil_rx_handle(struct wil6210_priv *wil, int *quota);
void wil6210_unmask_irq_rx(struct wil6210_priv *wil);
int wil_iftype_nl2wmi(enum nl80211_iftype type);
int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd);
int wil_request_firmware(struct wil6210_priv *wil, const char *name);
#endif /* __WIL6210_H__ */