linux/drivers/media/dvb/mantis/hopper_vp3028.c

89 lines
2.2 KiB
C
Raw Normal View History

/*
Hopper VP-3028 driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "zl10353.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "hopper_vp3028.h"
struct zl10353_config hopper_vp3028_config = {
.demod_address = 0x0f,
};
#define MANTIS_MODEL_NAME "VP-3028"
#define MANTIS_DEV_TYPE "DVB-T"
static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
struct mantis_hwconfig *config = mantis->hwconfig;
int err = 0;
mantis_gpio_set_bits(mantis, config->reset, 0);
msleep(100);
err = mantis_frontend_power(mantis, POWER_ON);
msleep(100);
mantis_gpio_set_bits(mantis, config->reset, 1);
err = mantis_frontend_power(mantis, POWER_ON);
if (err == 0) {
msleep(250);
dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter);
if (!fe)
return -1;
} else {
dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
adapter->name,
err);
return -EIO;
}
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp3028_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_188,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp3028_frontend_init,
.power = GPIF_A00,
.reset = GPIF_A03,
};