linux/kernel/cpu.c

2706 lines
65 KiB
C
Raw Normal View History

/* CPU control.
* (C) 2001, 2002, 2003, 2004 Rusty Russell
*
* This code is licenced under the GPL.
*/
sched/core: Fix illegal RCU from offline CPUs In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
2020-04-01 21:40:33 +00:00
#include <linux/sched/mm.h>
#include <linux/proc_fs.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/notifier.h>
#include <linux/sched/signal.h>
#include <linux/sched/hotplug.h>
#include <linux/sched/isolation.h>
#include <linux/sched/task.h>
x86/speculation: Rework SMT state change arch_smt_update() is only called when the sysfs SMT control knob is changed. This means that when SMT is enabled in the sysfs control knob the system is considered to have SMT active even if all siblings are offline. To allow finegrained control of the speculation mitigations, the actual SMT state is more interesting than the fact that siblings could be enabled. Rework the code, so arch_smt_update() is invoked from each individual CPU hotplug function, and simplify the update function while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
2018-11-25 18:33:39 +00:00
#include <linux/sched/smt.h>
#include <linux/unistd.h>
#include <linux/cpu.h>
cpu: introduce clear_tasks_mm_cpumask() helper Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:22 +00:00
#include <linux/oom.h>
#include <linux/rcupdate.h>
#include <linux/export.h>
#include <linux/bug.h>
#include <linux/kthread.h>
#include <linux/stop_machine.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/suspend.h>
#include <linux/lockdep.h>
clockevents: Fix cpu_down() race for hrtimer based broadcasting It was found when doing a hotplug stress test on POWER, that the machine either hit softlockups or rcu_sched stall warnings. The issue was traced to commit: 7cba160ad789 ("powernv/cpuidle: Redesign idle states management") which exposed the cpu_down() race with hrtimer based broadcast mode: 5d1638acb9f6 ("tick: Introduce hrtimer based broadcast") The race is the following: Assume CPU1 is the CPU which holds the hrtimer broadcasting duty before it is taken down. CPU0 CPU1 cpu_down() take_cpu_down() disable_interrupts() cpu_die() while (CPU1 != CPU_DEAD) { msleep(100); switch_to_idle(); stop_cpu_timer(); schedule_broadcast(); } tick_cleanup_cpu_dead() take_over_broadcast() So after CPU1 disabled interrupts it cannot handle the broadcast hrtimer anymore, so CPU0 will be stuck forever. Fix this by explicitly taking over broadcast duty before cpu_die(). This is a temporary workaround. What we really want is a callback in the clockevent device which allows us to do that from the dying CPU by pushing the hrtimer onto a different cpu. That might involve an IPI and is definitely more complex than this immediate fix. Changelog was picked up from: https://lkml.org/lkml/2015/2/16/213 Suggested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: mpe@ellerman.id.au Cc: nicolas.pitre@linaro.org Cc: peterz@infradead.org Cc: rjw@rjwysocki.net Fixes: http://linuxppc.10917.n7.nabble.com/offlining-cpus-breakage-td88619.html Link: http://lkml.kernel.org/r/20150330092410.24979.59887.stgit@preeti.in.ibm.com [ Merged it to the latest timer tree, renamed the callback, tidied up the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-30 09:29:19 +00:00
#include <linux/tick.h>
hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-05 17:12:30 +00:00
#include <linux/irq.h>
watchdog/hardlockup/perf: Prevent CPU hotplug deadlock The following deadlock is possible in the watchdog hotplug code: cpus_write_lock() ... takedown_cpu() smpboot_park_threads() smpboot_park_thread() kthread_park() ->park() := watchdog_disable() watchdog_nmi_disable() perf_event_release_kernel(); put_event() _free_event() ->destroy() := hw_perf_event_destroy() x86_release_hardware() release_ds_buffers() get_online_cpus() when a per cpu watchdog perf event is destroyed which drops the last reference to the PMU hardware. The cleanup code there invokes get_online_cpus() which instantly deadlocks because the hotplug percpu rwsem is write locked. To solve this add a deferring mechanism: cpus_write_lock() kthread_park() watchdog_nmi_disable(deferred) perf_event_disable(event); move_event_to_deferred(event); .... cpus_write_unlock() cleaup_deferred_events() perf_event_release_kernel() This is still properly serialized against concurrent hotplug via the cpu_add_remove_lock, which is held by the task which initiated the hotplug event. This is also used to handle event destruction when the watchdog threads are parked via other mechanisms than CPU hotplug. Analyzed-by: Peter Zijlstra <peterz@infradead.org> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Don Zickus <dzickus@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Ulrich Obergfell <uobergfe@redhat.com> Link: http://lkml.kernel.org/r/20170912194146.884469246@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-12 19:37:04 +00:00
#include <linux/nmi.h>
#include <linux/smpboot.h>
#include <linux/relay.h>
#include <linux/slab.h>
#include <linux/percpu-rwsem.h>
cpu/hotplug: Cure the cpusets trainwreck Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered. cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order. As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed. The same is true for CPU unplug, but that does not create user observable failure (yet). It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable. Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that. So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever. Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock. Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway. This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story. Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it. Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened. Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") Reported-by: Alexey Klimov <aklimov@redhat.com> Reported-by: Joshua Baker <jobaker@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <aklimov@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
2021-03-27 21:01:36 +00:00
#include <linux/cpuset.h>
#include <trace/events/power.h>
#define CREATE_TRACE_POINTS
#include <trace/events/cpuhp.h>
#include "smpboot.h"
/**
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* struct cpuhp_cpu_state - Per cpu hotplug state storage
* @state: The current cpu state
* @target: The target state
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* @fail: Current CPU hotplug callback state
* @thread: Pointer to the hotplug thread
* @should_run: Thread should execute
cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-08 12:40:15 +00:00
* @rollback: Perform a rollback
* @single: Single callback invocation
* @bringup: Single callback bringup or teardown selector
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* @cpu: CPU number
* @node: Remote CPU node; for multi-instance, do a
* single entry callback for install/remove
* @last: For multi-instance rollback, remember how far we got
* @cb_state: The state for a single callback (install/uninstall)
* @result: Result of the operation
* @done_up: Signal completion to the issuer of the task for cpu-up
* @done_down: Signal completion to the issuer of the task for cpu-down
*/
struct cpuhp_cpu_state {
enum cpuhp_state state;
enum cpuhp_state target;
enum cpuhp_state fail;
#ifdef CONFIG_SMP
struct task_struct *thread;
bool should_run;
cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-08 12:40:15 +00:00
bool rollback;
bool single;
bool bringup;
int cpu;
struct hlist_node *node;
struct hlist_node *last;
enum cpuhp_state cb_state;
int result;
struct completion done_up;
struct completion done_down;
#endif
};
static DEFINE_PER_CPU(struct cpuhp_cpu_state, cpuhp_state) = {
.fail = CPUHP_INVALID,
};
#ifdef CONFIG_SMP
cpumask_t cpus_booted_once_mask;
#endif
#if defined(CONFIG_LOCKDEP) && defined(CONFIG_SMP)
static struct lockdep_map cpuhp_state_up_map =
STATIC_LOCKDEP_MAP_INIT("cpuhp_state-up", &cpuhp_state_up_map);
static struct lockdep_map cpuhp_state_down_map =
STATIC_LOCKDEP_MAP_INIT("cpuhp_state-down", &cpuhp_state_down_map);
static inline void cpuhp_lock_acquire(bool bringup)
{
lock_map_acquire(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map);
}
static inline void cpuhp_lock_release(bool bringup)
{
lock_map_release(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map);
}
#else
static inline void cpuhp_lock_acquire(bool bringup) { }
static inline void cpuhp_lock_release(bool bringup) { }
#endif
/**
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* struct cpuhp_step - Hotplug state machine step
* @name: Name of the step
* @startup: Startup function of the step
* @teardown: Teardown function of the step
* @cant_stop: Bringup/teardown can't be stopped at this step
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* @multi_instance: State has multiple instances which get added afterwards
*/
struct cpuhp_step {
const char *name;
union {
int (*single)(unsigned int cpu);
int (*multi)(unsigned int cpu,
struct hlist_node *node);
} startup;
union {
int (*single)(unsigned int cpu);
int (*multi)(unsigned int cpu,
struct hlist_node *node);
} teardown;
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
/* private: */
struct hlist_head list;
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
/* public: */
bool cant_stop;
bool multi_instance;
};
static DEFINE_MUTEX(cpuhp_state_mutex);
static struct cpuhp_step cpuhp_hp_states[];
static struct cpuhp_step *cpuhp_get_step(enum cpuhp_state state)
{
return cpuhp_hp_states + state;
}
static bool cpuhp_step_empty(bool bringup, struct cpuhp_step *step)
{
return bringup ? !step->startup.single : !step->teardown.single;
}
/**
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* cpuhp_invoke_callback - Invoke the callbacks for a given state
* @cpu: The cpu for which the callback should be invoked
* @state: The state to do callbacks for
* @bringup: True if the bringup callback should be invoked
* @node: For multi-instance, do a single entry callback for install/remove
* @lastp: For multi-instance rollback, remember how far we got
*
* Called from cpu hotplug and from the state register machinery.
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
*
* Return: %0 on success or a negative errno code
*/
static int cpuhp_invoke_callback(unsigned int cpu, enum cpuhp_state state,
bool bringup, struct hlist_node *node,
struct hlist_node **lastp)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
struct cpuhp_step *step = cpuhp_get_step(state);
int (*cbm)(unsigned int cpu, struct hlist_node *node);
int (*cb)(unsigned int cpu);
int ret, cnt;
if (st->fail == state) {
st->fail = CPUHP_INVALID;
return -EAGAIN;
}
if (cpuhp_step_empty(bringup, step)) {
WARN_ON_ONCE(1);
return 0;
}
if (!step->multi_instance) {
WARN_ON_ONCE(lastp && *lastp);
cb = bringup ? step->startup.single : step->teardown.single;
trace_cpuhp_enter(cpu, st->target, state, cb);
ret = cb(cpu);
trace_cpuhp_exit(cpu, st->state, state, ret);
return ret;
}
cbm = bringup ? step->startup.multi : step->teardown.multi;
/* Single invocation for instance add/remove */
if (node) {
WARN_ON_ONCE(lastp && *lastp);
trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
ret = cbm(cpu, node);
trace_cpuhp_exit(cpu, st->state, state, ret);
return ret;
}
/* State transition. Invoke on all instances */
cnt = 0;
hlist_for_each(node, &step->list) {
if (lastp && node == *lastp)
break;
trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
ret = cbm(cpu, node);
trace_cpuhp_exit(cpu, st->state, state, ret);
if (ret) {
if (!lastp)
goto err;
*lastp = node;
return ret;
}
cnt++;
}
if (lastp)
*lastp = NULL;
return 0;
err:
/* Rollback the instances if one failed */
cbm = !bringup ? step->startup.multi : step->teardown.multi;
if (!cbm)
return ret;
hlist_for_each(node, &step->list) {
if (!cnt--)
break;
trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
ret = cbm(cpu, node);
trace_cpuhp_exit(cpu, st->state, state, ret);
/*
* Rollback must not fail,
*/
WARN_ON_ONCE(ret);
}
return ret;
}
#ifdef CONFIG_SMP
static bool cpuhp_is_ap_state(enum cpuhp_state state)
{
/*
* The extra check for CPUHP_TEARDOWN_CPU is only for documentation
* purposes as that state is handled explicitly in cpu_down.
*/
return state > CPUHP_BRINGUP_CPU && state != CPUHP_TEARDOWN_CPU;
}
static inline void wait_for_ap_thread(struct cpuhp_cpu_state *st, bool bringup)
{
struct completion *done = bringup ? &st->done_up : &st->done_down;
wait_for_completion(done);
}
static inline void complete_ap_thread(struct cpuhp_cpu_state *st, bool bringup)
{
struct completion *done = bringup ? &st->done_up : &st->done_down;
complete(done);
}
/*
* The former STARTING/DYING states, ran with IRQs disabled and must not fail.
*/
static bool cpuhp_is_atomic_state(enum cpuhp_state state)
{
return CPUHP_AP_IDLE_DEAD <= state && state < CPUHP_AP_ONLINE;
}
/* Serializes the updates to cpu_online_mask, cpu_present_mask */
static DEFINE_MUTEX(cpu_add_remove_lock);
bool cpuhp_tasks_frozen;
EXPORT_SYMBOL_GPL(cpuhp_tasks_frozen);
/*
CPU hotplug: Provide lockless versions of callback registration functions The following method of CPU hotplug callback registration is not safe due to the possibility of an ABBA deadlock involving the cpu_add_remove_lock and the cpu_hotplug.lock. get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); The deadlock is shown below: CPU 0 CPU 1 ----- ----- Acquire cpu_hotplug.lock [via get_online_cpus()] CPU online/offline operation takes cpu_add_remove_lock [via cpu_maps_update_begin()] Try to acquire cpu_add_remove_lock [via register_cpu_notifier()] CPU online/offline operation tries to acquire cpu_hotplug.lock [via cpu_hotplug_begin()] *** DEADLOCK! *** The problem here is that callback registration takes the locks in one order whereas the CPU hotplug operations take the same locks in the opposite order. To avoid this issue and to provide a race-free method to register CPU hotplug callbacks (along with initialization of already online CPUs), introduce new variants of the callback registration APIs that simply register the callbacks without holding the cpu_add_remove_lock during the registration. That way, we can avoid the ABBA scenario. However, we will need to hold the cpu_add_remove_lock throughout the entire critical section, to protect updates to the callback/notifier chain. This can be achieved by writing the callback registration code as follows: cpu_maps_update_begin(); [ or cpu_notifier_register_begin(); see below ] for_each_online_cpu(cpu) init_cpu(cpu); /* This doesn't take the cpu_add_remove_lock */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_maps_update_done(); [ or cpu_notifier_register_done(); see below ] Note that we can't use get_online_cpus() here instead of cpu_maps_update_begin() because the cpu_hotplug.lock is dropped during the invocation of CPU_POST_DEAD notifiers, and hence get_online_cpus() cannot provide the necessary synchronization to protect the callback/notifier chains against concurrent reads and writes. On the other hand, since the cpu_add_remove_lock protects the entire hotplug operation (including CPU_POST_DEAD), we can use cpu_maps_update_begin/done() to guarantee proper synchronization. Also, since cpu_maps_update_begin/done() is like a super-set of get/put_online_cpus(), the former naturally protects the critical sections from concurrent hotplug operations. Since the names cpu_maps_update_begin/done() don't make much sense in CPU hotplug callback registration scenarios, we'll introduce new APIs named cpu_notifier_register_begin/done() and map them to cpu_maps_update_begin/done(). In summary, introduce the lockless variants of un/register_cpu_notifier() and also export the cpu_notifier_register_begin/done() APIs for use by modules. This way, we provide a race-free way to register hotplug callbacks as well as perform initialization for the CPUs that are already online. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-10 20:34:14 +00:00
* The following two APIs (cpu_maps_update_begin/done) must be used when
* attempting to serialize the updates to cpu_online_mask & cpu_present_mask.
*/
void cpu_maps_update_begin(void)
{
mutex_lock(&cpu_add_remove_lock);
}
void cpu_maps_update_done(void)
{
mutex_unlock(&cpu_add_remove_lock);
}
/*
* If set, cpu_up and cpu_down will return -EBUSY and do nothing.
* Should always be manipulated under cpu_add_remove_lock
*/
static int cpu_hotplug_disabled;
#ifdef CONFIG_HOTPLUG_CPU
DEFINE_STATIC_PERCPU_RWSEM(cpu_hotplug_lock);
void cpus_read_lock(void)
{
percpu_down_read(&cpu_hotplug_lock);
}
EXPORT_SYMBOL_GPL(cpus_read_lock);
int cpus_read_trylock(void)
{
return percpu_down_read_trylock(&cpu_hotplug_lock);
}
EXPORT_SYMBOL_GPL(cpus_read_trylock);
void cpus_read_unlock(void)
{
percpu_up_read(&cpu_hotplug_lock);
}
EXPORT_SYMBOL_GPL(cpus_read_unlock);
void cpus_write_lock(void)
{
percpu_down_write(&cpu_hotplug_lock);
}
void cpus_write_unlock(void)
{
percpu_up_write(&cpu_hotplug_lock);
}
void lockdep_assert_cpus_held(void)
{
cpu/hotplug: Mute hotplug lockdep during init Since we've had: commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") we've been getting some lockdep warnings during init, such as on HiKey960: [ 0.820495] WARNING: CPU: 4 PID: 0 at kernel/cpu.c:316 lockdep_assert_cpus_held+0x3c/0x48 [ 0.820498] Modules linked in: [ 0.820509] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G S 4.20.0-rc5-00051-g4cae42a #34 [ 0.820511] Hardware name: HiKey960 (DT) [ 0.820516] pstate: 600001c5 (nZCv dAIF -PAN -UAO) [ 0.820520] pc : lockdep_assert_cpus_held+0x3c/0x48 [ 0.820523] lr : lockdep_assert_cpus_held+0x38/0x48 [ 0.820526] sp : ffff00000a9cbe50 [ 0.820528] x29: ffff00000a9cbe50 x28: 0000000000000000 [ 0.820533] x27: 00008000b69e5000 x26: ffff8000bff4cfe0 [ 0.820537] x25: ffff000008ba69e0 x24: 0000000000000001 [ 0.820541] x23: ffff000008fce000 x22: ffff000008ba70c8 [ 0.820545] x21: 0000000000000001 x20: 0000000000000003 [ 0.820548] x19: ffff00000a35d628 x18: ffffffffffffffff [ 0.820552] x17: 0000000000000000 x16: 0000000000000000 [ 0.820556] x15: ffff00000958f848 x14: 455f3052464d4d34 [ 0.820559] x13: 00000000769dde98 x12: ffff8000bf3f65a8 [ 0.820564] x11: 0000000000000000 x10: ffff00000958f848 [ 0.820567] x9 : ffff000009592000 x8 : ffff00000958f848 [ 0.820571] x7 : ffff00000818ffa0 x6 : 0000000000000000 [ 0.820574] x5 : 0000000000000000 x4 : 0000000000000001 [ 0.820578] x3 : 0000000000000000 x2 : 0000000000000001 [ 0.820582] x1 : 00000000ffffffff x0 : 0000000000000000 [ 0.820587] Call trace: [ 0.820591] lockdep_assert_cpus_held+0x3c/0x48 [ 0.820598] static_key_enable_cpuslocked+0x28/0xd0 [ 0.820606] arch_timer_check_ool_workaround+0xe8/0x228 [ 0.820610] arch_timer_starting_cpu+0xe4/0x2d8 [ 0.820615] cpuhp_invoke_callback+0xe8/0xd08 [ 0.820619] notify_cpu_starting+0x80/0xb8 [ 0.820625] secondary_start_kernel+0x118/0x1d0 We've also had a similar warning in sched_init_smp() for every asymmetric system that would enable the sched_asym_cpucapacity static key, although that was singled out in: commit 40fa3780bac2 ("sched/core: Take the hotplug lock in sched_init_smp()") Those warnings are actually harmless, since we cannot have hotplug operations at the time they appear. Instead of starting to sprinkle useless hotplug lock operations in the init codepaths, mute the warnings until they start warning about real problems. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: cai@gmx.us Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: longman@redhat.com Cc: marc.zyngier@arm.com Cc: mark.rutland@arm.com Link: https://lkml.kernel.org/r/1545243796-23224-2-git-send-email-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-19 18:23:15 +00:00
/*
* We can't have hotplug operations before userspace starts running,
* and some init codepaths will knowingly not take the hotplug lock.
* This is all valid, so mute lockdep until it makes sense to report
* unheld locks.
*/
if (system_state < SYSTEM_RUNNING)
return;
percpu_rwsem_assert_held(&cpu_hotplug_lock);
}
#ifdef CONFIG_LOCKDEP
int lockdep_is_cpus_held(void)
{
return percpu_rwsem_is_held(&cpu_hotplug_lock);
}
#endif
static void lockdep_acquire_cpus_lock(void)
{
rwsem_acquire(&cpu_hotplug_lock.dep_map, 0, 0, _THIS_IP_);
}
static void lockdep_release_cpus_lock(void)
{
rwsem_release(&cpu_hotplug_lock.dep_map, _THIS_IP_);
}
/*
* Wait for currently running CPU hotplug operations to complete (if any) and
* disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects
* the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the
* hotplug path before performing hotplug operations. So acquiring that lock
* guarantees mutual exclusion from any currently running hotplug operations.
*/
void cpu_hotplug_disable(void)
{
cpu_maps_update_begin();
cpu_hotplug_disabled++;
cpu_maps_update_done();
}
EXPORT_SYMBOL_GPL(cpu_hotplug_disable);
static void __cpu_hotplug_enable(void)
{
if (WARN_ONCE(!cpu_hotplug_disabled, "Unbalanced cpu hotplug enable\n"))
return;
cpu_hotplug_disabled--;
}
void cpu_hotplug_enable(void)
{
cpu_maps_update_begin();
__cpu_hotplug_enable();
cpu_maps_update_done();
}
EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
#else
static void lockdep_acquire_cpus_lock(void)
{
}
static void lockdep_release_cpus_lock(void)
{
}
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 15:45:53 +00:00
#endif /* CONFIG_HOTPLUG_CPU */
x86/speculation: Rework SMT state change arch_smt_update() is only called when the sysfs SMT control knob is changed. This means that when SMT is enabled in the sysfs control knob the system is considered to have SMT active even if all siblings are offline. To allow finegrained control of the speculation mitigations, the actual SMT state is more interesting than the fact that siblings could be enabled. Rework the code, so arch_smt_update() is invoked from each individual CPU hotplug function, and simplify the update function while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
2018-11-25 18:33:39 +00:00
/*
* Architectures that need SMT-specific errata handling during SMT hotplug
* should override this.
*/
void __weak arch_smt_update(void) { }
#ifdef CONFIG_HOTPLUG_SMT
enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
void __init cpu_smt_disable(bool force)
{
if (!cpu_smt_possible())
return;
if (force) {
pr_info("SMT: Force disabled\n");
cpu_smt_control = CPU_SMT_FORCE_DISABLED;
} else {
pr_info("SMT: disabled\n");
cpu_smt_control = CPU_SMT_DISABLED;
}
}
/*
* The decision whether SMT is supported can only be done after the full
cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
2019-01-30 13:13:58 +00:00
* CPU identification. Called from architecture code.
*/
void __init cpu_smt_check_topology(void)
{
cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
2019-01-30 13:13:58 +00:00
if (!topology_smt_supported())
cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
}
static int __init smt_cmdline_disable(char *str)
{
cpu_smt_disable(str && !strcmp(str, "force"));
return 0;
}
early_param("nosmt", smt_cmdline_disable);
static inline bool cpu_smt_allowed(unsigned int cpu)
{
cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
2019-01-30 13:13:58 +00:00
if (cpu_smt_control == CPU_SMT_ENABLED)
return true;
cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Mario <jmario@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
2019-01-30 13:13:58 +00:00
if (topology_is_primary_thread(cpu))
return true;
/*
* On x86 it's required to boot all logical CPUs at least once so
* that the init code can get a chance to set CR4.MCE on each
* CPU. Otherwise, a broadcasted MCE observing CR4.MCE=0b on any
* core will shutdown the machine.
*/
return !cpumask_test_cpu(cpu, &cpus_booted_once_mask);
}
/* Returns true if SMT is not supported of forcefully (irreversibly) disabled */
bool cpu_smt_possible(void)
{
return cpu_smt_control != CPU_SMT_FORCE_DISABLED &&
cpu_smt_control != CPU_SMT_NOT_SUPPORTED;
}
EXPORT_SYMBOL_GPL(cpu_smt_possible);
#else
static inline bool cpu_smt_allowed(unsigned int cpu) { return true; }
#endif
static inline enum cpuhp_state
cpuhp_set_state(struct cpuhp_cpu_state *st, enum cpuhp_state target)
{
enum cpuhp_state prev_state = st->state;
bool bringup = st->state < target;
st->rollback = false;
st->last = NULL;
st->target = target;
st->single = false;
st->bringup = bringup;
if (cpu_dying(st->cpu) != !bringup)
set_cpu_dying(st->cpu, !bringup);
return prev_state;
}
static inline void
cpuhp_reset_state(struct cpuhp_cpu_state *st, enum cpuhp_state prev_state)
{
bool bringup = !st->bringup;
st->target = prev_state;
/*
* Already rolling back. No need invert the bringup value or to change
* the current state.
*/
if (st->rollback)
return;
st->rollback = true;
/*
* If we have st->last we need to undo partial multi_instance of this
* state first. Otherwise start undo at the previous state.
*/
if (!st->last) {
if (st->bringup)
st->state--;
else
st->state++;
}
st->bringup = bringup;
if (cpu_dying(st->cpu) != !bringup)
set_cpu_dying(st->cpu, !bringup);
}
/* Regular hotplug invocation of the AP hotplug thread */
static void __cpuhp_kick_ap(struct cpuhp_cpu_state *st)
{
if (!st->single && st->state == st->target)
return;
st->result = 0;
/*
* Make sure the above stores are visible before should_run becomes
* true. Paired with the mb() above in cpuhp_thread_fun()
*/
smp_mb();
st->should_run = true;
wake_up_process(st->thread);
wait_for_ap_thread(st, st->bringup);
}
static int cpuhp_kick_ap(struct cpuhp_cpu_state *st, enum cpuhp_state target)
{
enum cpuhp_state prev_state;
int ret;
prev_state = cpuhp_set_state(st, target);
__cpuhp_kick_ap(st);
if ((ret = st->result)) {
cpuhp_reset_state(st, prev_state);
__cpuhp_kick_ap(st);
}
return ret;
}
smp/hotplug: Move unparking of percpu threads to the control CPU Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-04 20:20:23 +00:00
static int bringup_wait_for_ap(unsigned int cpu)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
smp/hotplug: Move unparking of percpu threads to the control CPU Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-04 20:20:23 +00:00
/* Wait for the CPU to reach CPUHP_AP_ONLINE_IDLE */
wait_for_ap_thread(st, true);
if (WARN_ON_ONCE((!cpu_online(cpu))))
return -ECANCELED;
smp/hotplug: Move unparking of percpu threads to the control CPU Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-04 20:20:23 +00:00
/* Unpark the hotplug thread of the target cpu */
smp/hotplug: Move unparking of percpu threads to the control CPU Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-04 20:20:23 +00:00
kthread_unpark(st->thread);
/*
* SMT soft disabling on X86 requires to bring the CPU out of the
* BIOS 'wait for SIPI' state in order to set the CR4.MCE bit. The
* CPU marked itself as booted_once in notify_cpu_starting() so the
* cpu_smt_allowed() check will now return false if this is not the
* primary sibling.
*/
if (!cpu_smt_allowed(cpu))
return -ECANCELED;
if (st->target <= CPUHP_AP_ONLINE_IDLE)
return 0;
return cpuhp_kick_ap(st, st->target);
}
static int bringup_cpu(unsigned int cpu)
{
struct task_struct *idle = idle_thread_get(cpu);
int ret;
/*
* Some architectures have to walk the irq descriptors to
* setup the vector space for the cpu which comes online.
* Prevent irq alloc/free across the bringup.
*/
irq_lock_sparse();
/* Arch-specific enabling code. */
ret = __cpu_up(cpu, idle);
irq_unlock_sparse();
if (ret)
return ret;
smp/hotplug: Move unparking of percpu threads to the control CPU Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-04 20:20:23 +00:00
return bringup_wait_for_ap(cpu);
}
sched/core: Fix illegal RCU from offline CPUs In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
2020-04-01 21:40:33 +00:00
static int finish_cpu(unsigned int cpu)
{
struct task_struct *idle = idle_thread_get(cpu);
struct mm_struct *mm = idle->active_mm;
/*
* idle_task_exit() will have switched to &init_mm, now
* clean up any remaining active_mm state.
*/
if (mm != &init_mm)
idle->active_mm = &init_mm;
mmdrop(mm);
return 0;
}
/*
* Hotplug state machine related functions
*/
/*
* Get the next state to run. Empty ones will be skipped. Returns true if a
* state must be run.
*
* st->state will be modified ahead of time, to match state_to_run, as if it
* has already ran.
*/
static bool cpuhp_next_state(bool bringup,
enum cpuhp_state *state_to_run,
struct cpuhp_cpu_state *st,
enum cpuhp_state target)
{
do {
if (bringup) {
if (st->state >= target)
return false;
*state_to_run = ++st->state;
} else {
if (st->state <= target)
return false;
*state_to_run = st->state--;
}
if (!cpuhp_step_empty(bringup, cpuhp_get_step(*state_to_run)))
break;
} while (true);
return true;
}
static int cpuhp_invoke_callback_range(bool bringup,
unsigned int cpu,
struct cpuhp_cpu_state *st,
enum cpuhp_state target)
{
enum cpuhp_state state;
int err = 0;
while (cpuhp_next_state(bringup, &state, st, target)) {
err = cpuhp_invoke_callback(cpu, state, bringup, NULL, NULL);
if (err)
break;
}
return err;
}
cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n Tianyu reported a crash in a CPU hotplug teardown callback when booting a kernel which has CONFIG_HOTPLUG_CPU disabled with the 'nosmt' boot parameter. It turns out that the SMP=y CONFIG_HOTPLUG_CPU=n case has been broken forever in case that a bringup callback fails. Unfortunately this issue was not recognized when the CPU hotplug code was reworked, so the shortcoming just stayed in place. When a bringup callback fails, the CPU hotplug code rolls back the operation and takes the CPU offline. The 'nosmt' command line argument uses a bringup failure to abort the bringup of SMT sibling CPUs. This partial bringup is required due to the MCE misdesign on Intel CPUs. With CONFIG_HOTPLUG_CPU=y the rollback works perfectly fine, but CONFIG_HOTPLUG_CPU=n lacks essential mechanisms to exercise the low level teardown of a CPU including the synchronizations in various facilities like RCU, NOHZ and others. As a consequence the teardown callbacks which must be executed on the outgoing CPU within stop machine with interrupts disabled are executed on the control CPU in interrupt enabled and preemptible context causing the kernel to crash and burn. The pre state machine code has a different failure mode which is more subtle and resulting in a less obvious use after free crash because the control side frees resources which are still in use by the undead CPU. But this is not a x86 only problem. Any architecture which supports the SMP=y HOTPLUG_CPU=n combination suffers from the same issue. It's just less likely to be triggered because in 99.99999% of the cases all bringup callbacks succeed. The easy solution of making HOTPLUG_CPU mandatory for SMP is not working on all architectures as the following architectures have either no hotplug support at all or not all subarchitectures support it: alpha, arc, hexagon, openrisc, riscv, sparc (32bit), mips (partial). Crashing the kernel in such a situation is not an acceptable state either. Implement a minimal rollback variant by limiting the teardown to the point where all regular teardown callbacks have been invoked and leave the CPU in the 'dead' idle state. This has the following consequences: - the CPU is brought down to the point where the stop_machine takedown would happen. - the CPU stays there forever and is idle - The CPU is cleared in the CPU active mask, but not in the CPU online mask which is a legit state. - Interrupts are not forced away from the CPU - All facilities which only look at online mask would still see it, but that is the case during normal hotplug/unplug operations as well. It's just a (way) longer time frame. This will expose issues, which haven't been exposed before or only seldom, because now the normally transient state of being non active but online is a permanent state. In testing this exposed already an issue vs. work queues where the vmstat code schedules work on the almost dead CPU which ends up in an unbound workqueue and triggers 'preemtible context' warnings. This is not a problem of this change, it merily exposes an already existing issue. Still this is better than crashing fully without a chance to debug it. This is mainly thought as workaround for those architectures which do not support HOTPLUG_CPU. All others should enforce HOTPLUG_CPU for SMP. Fixes: 2e1a3483ce74 ("cpu/hotplug: Split out the state walk into functions") Reported-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Micheal Kelley <michael.h.kelley@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190326163811.503390616@linutronix.de
2019-03-26 16:36:05 +00:00
static inline bool can_rollback_cpu(struct cpuhp_cpu_state *st)
{
if (IS_ENABLED(CONFIG_HOTPLUG_CPU))
return true;
/*
* When CPU hotplug is disabled, then taking the CPU down is not
* possible because takedown_cpu() and the architecture and
* subsystem specific mechanisms are not available. So the CPU
* which would be completely unplugged again needs to stay around
* in the current state.
*/
return st->state <= CPUHP_BRINGUP_CPU;
}
static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
enum cpuhp_state target)
{
enum cpuhp_state prev_state = st->state;
int ret = 0;
ret = cpuhp_invoke_callback_range(true, cpu, st, target);
if (ret) {
pr_debug("CPU UP failed (%d) CPU %u state %s (%d)\n",
ret, cpu, cpuhp_get_step(st->state)->name,
st->state);
cpuhp_reset_state(st, prev_state);
if (can_rollback_cpu(st))
WARN_ON(cpuhp_invoke_callback_range(false, cpu, st,
prev_state));
}
return ret;
}
/*
* The cpu hotplug threads manage the bringup and teardown of the cpus
*/
static void cpuhp_create(unsigned int cpu)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
init_completion(&st->done_up);
init_completion(&st->done_down);
st->cpu = cpu;
}
static int cpuhp_should_run(unsigned int cpu)
{
struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
return st->should_run;
}
/*
* Execute teardown/startup callbacks on the plugged cpu. Also used to invoke
* callbacks when a state gets [un]installed at runtime.
*
* Each invocation of this function by the smpboot thread does a single AP
* state callback.
*
* It has 3 modes of operation:
* - single: runs st->cb_state
* - up: runs ++st->state, while st->state < st->target
* - down: runs st->state--, while st->state > st->target
*
* When complete or on error, should_run is cleared and the completion is fired.
*/
static void cpuhp_thread_fun(unsigned int cpu)
{
struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
bool bringup = st->bringup;
enum cpuhp_state state;
if (WARN_ON_ONCE(!st->should_run))
return;
/*
* ACQUIRE for the cpuhp_should_run() load of ->should_run. Ensures
* that if we see ->should_run we also see the rest of the state.
*/
smp_mb();
/*
* The BP holds the hotplug lock, but we're now running on the AP,
* ensure that anybody asserting the lock is held, will actually find
* it so.
*/
lockdep_acquire_cpus_lock();
cpuhp_lock_acquire(bringup);
if (st->single) {
state = st->cb_state;
st->should_run = false;
} else {
st->should_run = cpuhp_next_state(bringup, &state, st, st->target);
if (!st->should_run)
goto end;
}
WARN_ON_ONCE(!cpuhp_is_ap_state(state));
if (cpuhp_is_atomic_state(state)) {
local_irq_disable();
st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
local_irq_enable();
cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-08 12:40:15 +00:00
/*
* STARTING/DYING must not fail!
*/
WARN_ON_ONCE(st->result);
} else {
st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
}
if (st->result) {
/*
* If we fail on a rollback, we're up a creek without no
* paddle, no way forward, no way back. We loose, thanks for
* playing.
*/
WARN_ON_ONCE(st->rollback);
st->should_run = false;
}
end:
cpuhp_lock_release(bringup);
lockdep_release_cpus_lock();
if (!st->should_run)
complete_ap_thread(st, bringup);
}
/* Invoke a single callback on a remote cpu */
static int
cpuhp_invoke_ap_callback(int cpu, enum cpuhp_state state, bool bringup,
struct hlist_node *node)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int ret;
if (!cpu_online(cpu))
return 0;
cpuhp_lock_acquire(false);
cpuhp_lock_release(false);
cpuhp_lock_acquire(true);
cpuhp_lock_release(true);
/*
* If we are up and running, use the hotplug thread. For early calls
* we invoke the thread function directly.
*/
if (!st->thread)
return cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
st->rollback = false;
st->last = NULL;
st->node = node;
st->bringup = bringup;
st->cb_state = state;
st->single = true;
__cpuhp_kick_ap(st);
/*
* If we failed and did a partial, do a rollback.
*/
if ((ret = st->result) && st->last) {
st->rollback = true;
st->bringup = !bringup;
__cpuhp_kick_ap(st);
}
/*
* Clean up the leftovers so the next hotplug operation wont use stale
* data.
*/
st->node = st->last = NULL;
return ret;
}
static int cpuhp_kick_ap_work(unsigned int cpu)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
enum cpuhp_state prev_state = st->state;
int ret;
cpuhp_lock_acquire(false);
cpuhp_lock_release(false);
cpuhp_lock_acquire(true);
cpuhp_lock_release(true);
trace_cpuhp_enter(cpu, st->target, prev_state, cpuhp_kick_ap_work);
ret = cpuhp_kick_ap(st, st->target);
trace_cpuhp_exit(cpu, st->state, prev_state, ret);
return ret;
}
static struct smp_hotplug_thread cpuhp_threads = {
.store = &cpuhp_state.thread,
.create = &cpuhp_create,
.thread_should_run = cpuhp_should_run,
.thread_fn = cpuhp_thread_fun,
.thread_comm = "cpuhp/%u",
.selfparking = true,
};
void __init cpuhp_threads_init(void)
{
BUG_ON(smpboot_register_percpu_thread(&cpuhp_threads));
kthread_unpark(this_cpu_read(cpuhp_state.thread));
}
cpu/hotplug: Cure the cpusets trainwreck Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered. cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order. As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed. The same is true for CPU unplug, but that does not create user observable failure (yet). It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable. Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that. So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever. Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock. Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway. This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story. Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it. Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened. Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") Reported-by: Alexey Klimov <aklimov@redhat.com> Reported-by: Joshua Baker <jobaker@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <aklimov@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
2021-03-27 21:01:36 +00:00
/*
*
* Serialize hotplug trainwrecks outside of the cpu_hotplug_lock
* protected region.
*
* The operation is still serialized against concurrent CPU hotplug via
* cpu_add_remove_lock, i.e. CPU map protection. But it is _not_
* serialized against other hotplug related activity like adding or
* removing of state callbacks and state instances, which invoke either the
* startup or the teardown callback of the affected state.
*
* This is required for subsystems which are unfixable vs. CPU hotplug and
* evade lock inversion problems by scheduling work which has to be
* completed _before_ cpu_up()/_cpu_down() returns.
*
* Don't even think about adding anything to this for any new code or even
* drivers. It's only purpose is to keep existing lock order trainwrecks
* working.
*
* For cpu_down() there might be valid reasons to finish cleanups which are
* not required to be done under cpu_hotplug_lock, but that's a different
* story and would be not invoked via this.
*/
static void cpu_up_down_serialize_trainwrecks(bool tasks_frozen)
{
/*
* cpusets delegate hotplug operations to a worker to "solve" the
* lock order problems. Wait for the worker, but only if tasks are
* _not_ frozen (suspend, hibernate) as that would wait forever.
*
* The wait is required because otherwise the hotplug operation
* returns with inconsistent state, which could even be observed in
* user space when a new CPU is brought up. The CPU plug uevent
* would be delivered and user space reacting on it would fail to
* move tasks to the newly plugged CPU up to the point where the
* work has finished because up to that point the newly plugged CPU
* is not assignable in cpusets/cgroups. On unplug that's not
* necessarily a visible issue, but it is still inconsistent state,
* which is the real problem which needs to be "fixed". This can't
* prevent the transient state between scheduling the work and
* returning from waiting for it.
*/
if (!tasks_frozen)
cpuset_wait_for_hotplug();
}
hotplug: Make register and unregister notifier API symmetric Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40 <snipped> [ 145.122628] Call Trace: [ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20 [ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400 [ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300 [ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30 [ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0 [ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0 [ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30 [ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70 [ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180 [ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40 [ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0 [ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0 [ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Streetman <ddstreet@ieee.org> Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-07 13:54:38 +00:00
#ifdef CONFIG_HOTPLUG_CPU
#ifndef arch_clear_mm_cpumask_cpu
#define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
#endif
/**
* clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
* @cpu: a CPU id
*
* This function walks all processes, finds a valid mm struct for each one and
* then clears a corresponding bit in mm's cpumask. While this all sounds
* trivial, there are various non-obvious corner cases, which this function
* tries to solve in a safe manner.
*
* Also note that the function uses a somewhat relaxed locking scheme, so it may
* be called only for an already offlined CPU.
*/
cpu: introduce clear_tasks_mm_cpumask() helper Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:22 +00:00
void clear_tasks_mm_cpumask(int cpu)
{
struct task_struct *p;
/*
* This function is called after the cpu is taken down and marked
* offline, so its not like new tasks will ever get this cpu set in
* their mm mask. -- Peter Zijlstra
* Thus, we may use rcu_read_lock() here, instead of grabbing
* full-fledged tasklist_lock.
*/
WARN_ON(cpu_online(cpu));
cpu: introduce clear_tasks_mm_cpumask() helper Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:22 +00:00
rcu_read_lock();
for_each_process(p) {
struct task_struct *t;
/*
* Main thread might exit, but other threads may still have
* a valid mm. Find one.
*/
cpu: introduce clear_tasks_mm_cpumask() helper Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:22 +00:00
t = find_lock_task_mm(p);
if (!t)
continue;
arch_clear_mm_cpumask_cpu(cpu, t->mm);
cpu: introduce clear_tasks_mm_cpumask() helper Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 23:26:22 +00:00
task_unlock(t);
}
rcu_read_unlock();
}
/* Take this CPU down. */
static int take_cpu_down(void *_param)
{
struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
enum cpuhp_state target = max((int)st->target, CPUHP_AP_OFFLINE);
int err, cpu = smp_processor_id();
int ret;
/* Ensure this CPU doesn't handle any more interrupts. */
err = __cpu_disable();
if (err < 0)
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:50 +00:00
return err;
/*
* Must be called from CPUHP_TEARDOWN_CPU, which means, as we are going
* down, that the current state is CPUHP_TEARDOWN_CPU - 1.
*/
WARN_ON(st->state != (CPUHP_TEARDOWN_CPU - 1));
/* Invoke the former CPU_DYING callbacks */
ret = cpuhp_invoke_callback_range(false, cpu, st, target);
/*
* DYING must not fail!
*/
WARN_ON_ONCE(ret);
/* Give up timekeeping duties */
tick_handover_do_timer();
/* Remove CPU from timer broadcasting */
tick_offline_cpu(cpu);
/* Park the stopper thread */
stop_machine_park(cpu);
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:50 +00:00
return 0;
}
static int takedown_cpu(unsigned int cpu)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int err;
/* Park the smpboot threads */
kthread_park(st->thread);
sched: Remove get_online_cpus() usage Remove get_online_cpus() usage from the scheduler; there's 4 sites that use it: - sched_init_smp(); where its completely superfluous since we're in 'early' boot and there simply cannot be any hotplugging. - sched_getaffinity(); we already take a raw spinlock to protect the task cpus_allowed mask, this disables preemption and therefore also stabilizes cpu_online_mask as that's modified using stop_machine. However switch to active mask for symmetry with sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active mask stability by inserting sync_rcu/sched() into _cpu_down. - sched_setaffinity(); we don't appear to need get_online_cpus() either, there's two sites where hotplug appears relevant: * cpuset_cpus_allowed(); for the !cpuset case we use possible_mask, for the cpuset case we hold task_lock, which is a spinlock and thus for mainline disables preemption (might cause pain on RT). * set_cpus_allowed_ptr(); Holds all scheduler locks and thus has preemption properly disabled; also it already deals with hotplug races explicitly where it releases them. - migrate_swap(); we can make stop_two_cpus() do the heavy lifting for us with a little trickery. By adding a sync_sched/rcu() after the CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for cpu_active_mask. Use these to validate that both our cpus are active when queueing the stop work before we queue the stop_machine works for take_cpu_down(). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-11 12:38:20 +00:00
/*
hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-05 17:12:30 +00:00
* Prevent irq alloc/free while the dying cpu reorganizes the
* interrupt affinities.
sched: Remove get_online_cpus() usage Remove get_online_cpus() usage from the scheduler; there's 4 sites that use it: - sched_init_smp(); where its completely superfluous since we're in 'early' boot and there simply cannot be any hotplugging. - sched_getaffinity(); we already take a raw spinlock to protect the task cpus_allowed mask, this disables preemption and therefore also stabilizes cpu_online_mask as that's modified using stop_machine. However switch to active mask for symmetry with sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active mask stability by inserting sync_rcu/sched() into _cpu_down. - sched_setaffinity(); we don't appear to need get_online_cpus() either, there's two sites where hotplug appears relevant: * cpuset_cpus_allowed(); for the !cpuset case we use possible_mask, for the cpuset case we hold task_lock, which is a spinlock and thus for mainline disables preemption (might cause pain on RT). * set_cpus_allowed_ptr(); Holds all scheduler locks and thus has preemption properly disabled; also it already deals with hotplug races explicitly where it releases them. - migrate_swap(); we can make stop_two_cpus() do the heavy lifting for us with a little trickery. By adding a sync_sched/rcu() after the CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for cpu_active_mask. Use these to validate that both our cpus are active when queueing the stop work before we queue the stop_machine works for take_cpu_down(). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-11 12:38:20 +00:00
*/
hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-05 17:12:30 +00:00
irq_lock_sparse();
sched: Remove get_online_cpus() usage Remove get_online_cpus() usage from the scheduler; there's 4 sites that use it: - sched_init_smp(); where its completely superfluous since we're in 'early' boot and there simply cannot be any hotplugging. - sched_getaffinity(); we already take a raw spinlock to protect the task cpus_allowed mask, this disables preemption and therefore also stabilizes cpu_online_mask as that's modified using stop_machine. However switch to active mask for symmetry with sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active mask stability by inserting sync_rcu/sched() into _cpu_down. - sched_setaffinity(); we don't appear to need get_online_cpus() either, there's two sites where hotplug appears relevant: * cpuset_cpus_allowed(); for the !cpuset case we use possible_mask, for the cpuset case we hold task_lock, which is a spinlock and thus for mainline disables preemption (might cause pain on RT). * set_cpus_allowed_ptr(); Holds all scheduler locks and thus has preemption properly disabled; also it already deals with hotplug races explicitly where it releases them. - migrate_swap(); we can make stop_two_cpus() do the heavy lifting for us with a little trickery. By adding a sync_sched/rcu() after the CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for cpu_active_mask. Use these to validate that both our cpus are active when queueing the stop work before we queue the stop_machine works for take_cpu_down(). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-11 12:38:20 +00:00
hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-05 17:12:30 +00:00
/*
* So now all preempt/rcu users must observe !cpu_active().
*/
err = stop_machine_cpuslocked(take_cpu_down, NULL, cpumask_of(cpu));
if (err) {
cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-08 12:40:15 +00:00
/* CPU refused to die */
hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-05 17:12:30 +00:00
irq_unlock_sparse();
cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-08 12:40:15 +00:00
/* Unpark the hotplug thread so we can rollback there */
kthread_unpark(st->thread);
return err;
}
BUG_ON(cpu_online(cpu));
/*
* The teardown callback for CPUHP_AP_SCHED_STARTING will have removed
* all runnable tasks from the CPU, there's only the idle task left now
* that the migration thread is done doing the stop_machine thing.
*
* Wait for the stop thread to go away.
*/
wait_for_ap_thread(st, false);
BUG_ON(st->state != CPUHP_AP_IDLE_DEAD);
hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-05 17:12:30 +00:00
/* Interrupts are moved away from the dying cpu, reenable alloc/free */
irq_unlock_sparse();
clockevents: Fix cpu_down() race for hrtimer based broadcasting It was found when doing a hotplug stress test on POWER, that the machine either hit softlockups or rcu_sched stall warnings. The issue was traced to commit: 7cba160ad789 ("powernv/cpuidle: Redesign idle states management") which exposed the cpu_down() race with hrtimer based broadcast mode: 5d1638acb9f6 ("tick: Introduce hrtimer based broadcast") The race is the following: Assume CPU1 is the CPU which holds the hrtimer broadcasting duty before it is taken down. CPU0 CPU1 cpu_down() take_cpu_down() disable_interrupts() cpu_die() while (CPU1 != CPU_DEAD) { msleep(100); switch_to_idle(); stop_cpu_timer(); schedule_broadcast(); } tick_cleanup_cpu_dead() take_over_broadcast() So after CPU1 disabled interrupts it cannot handle the broadcast hrtimer anymore, so CPU0 will be stuck forever. Fix this by explicitly taking over broadcast duty before cpu_die(). This is a temporary workaround. What we really want is a callback in the clockevent device which allows us to do that from the dying CPU by pushing the hrtimer onto a different cpu. That might involve an IPI and is definitely more complex than this immediate fix. Changelog was picked up from: https://lkml.org/lkml/2015/2/16/213 Suggested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: mpe@ellerman.id.au Cc: nicolas.pitre@linaro.org Cc: peterz@infradead.org Cc: rjw@rjwysocki.net Fixes: http://linuxppc.10917.n7.nabble.com/offlining-cpus-breakage-td88619.html Link: http://lkml.kernel.org/r/20150330092410.24979.59887.stgit@preeti.in.ibm.com [ Merged it to the latest timer tree, renamed the callback, tidied up the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-30 09:29:19 +00:00
hotplug_cpu__broadcast_tick_pull(cpu);
/* This actually kills the CPU. */
__cpu_die(cpu);
tick_cleanup_dead_cpu(cpu);
rcu: Migrate callbacks earlier in the CPU-offline timeline RCU callbacks must be migrated away from an outgoing CPU, and this is done near the end of the CPU-hotplug operation, after the outgoing CPU is long gone. Unfortunately, this means that other CPU-hotplug callbacks can execute while the outgoing CPU's callbacks are still immobilized on the long-gone CPU's callback lists. If any of these CPU-hotplug callbacks must wait, either directly or indirectly, for the invocation of any of the immobilized RCU callbacks, the system will hang. This commit avoids such hangs by migrating the callbacks away from the outgoing CPU immediately upon its departure, shortly after the return from __cpu_die() in takedown_cpu(). Thus, RCU is able to advance these callbacks and invoke them, which allows all the after-the-fact CPU-hotplug callbacks to wait on these RCU callbacks without risk of a hang. While in the neighborhood, this commit also moves rcu_send_cbs_to_orphanage() and rcu_adopt_orphan_cbs() under a pre-existing #ifdef to avoid including dead code on the one hand and to avoid define-without-use warnings on the other hand. Reported-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: http://lkml.kernel.org/r/db9c91f6-1b17-6136-84f0-03c3c2581ab4@codeaurora.org Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Richard Weinberger <richard@nod.at>
2017-06-20 19:11:34 +00:00
rcutree_migrate_callbacks(cpu);
return 0;
}
static void cpuhp_complete_idle_dead(void *arg)
{
struct cpuhp_cpu_state *st = arg;
complete_ap_thread(st, false);
}
void cpuhp_report_idle_dead(void)
{
struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
BUG_ON(st->state != CPUHP_AP_OFFLINE);
rcu_report_dead(smp_processor_id());
st->state = CPUHP_AP_IDLE_DEAD;
/*
* We cannot call complete after rcu_report_dead() so we delegate it
* to an online cpu.
*/
smp_call_function_single(cpumask_first(cpu_online_mask),
cpuhp_complete_idle_dead, st, 0);
}
static int cpuhp_down_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
enum cpuhp_state target)
{
enum cpuhp_state prev_state = st->state;
int ret = 0;
ret = cpuhp_invoke_callback_range(false, cpu, st, target);
if (ret) {
pr_debug("CPU DOWN failed (%d) CPU %u state %s (%d)\n",
ret, cpu, cpuhp_get_step(st->state)->name,
st->state);
cpuhp_reset_state(st, prev_state);
if (st->state < prev_state)
WARN_ON(cpuhp_invoke_callback_range(true, cpu, st,
prev_state));
}
return ret;
}
/* Requires cpu_add_remove_lock to be held */
static int __ref _cpu_down(unsigned int cpu, int tasks_frozen,
enum cpuhp_state target)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int prev_state, ret = 0;
if (num_online_cpus() == 1)
return -EBUSY;
if (!cpu_present(cpu))
return -EINVAL;
cpus_write_lock();
cpuhp_tasks_frozen = tasks_frozen;
prev_state = cpuhp_set_state(st, target);
/*
* If the current CPU state is in the range of the AP hotplug thread,
* then we need to kick the thread.
*/
if (st->state > CPUHP_TEARDOWN_CPU) {
st->target = max((int)target, CPUHP_TEARDOWN_CPU);
ret = cpuhp_kick_ap_work(cpu);
/*
* The AP side has done the error rollback already. Just
* return the error code..
*/
if (ret)
goto out;
/*
* We might have stopped still in the range of the AP hotplug
* thread. Nothing to do anymore.
*/
if (st->state > CPUHP_TEARDOWN_CPU)
goto out;
st->target = target;
}
/*
* The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need
* to do the further cleanups.
*/
ret = cpuhp_down_callbacks(cpu, st, target);
if (ret && st->state < prev_state) {
if (st->state == CPUHP_TEARDOWN_CPU) {
cpuhp_reset_state(st, prev_state);
__cpuhp_kick_ap(st);
} else {
WARN(1, "DEAD callback error for CPU%d", cpu);
}
cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-08 12:40:15 +00:00
}
out:
cpus_write_unlock();
watchdog/hardlockup/perf: Prevent CPU hotplug deadlock The following deadlock is possible in the watchdog hotplug code: cpus_write_lock() ... takedown_cpu() smpboot_park_threads() smpboot_park_thread() kthread_park() ->park() := watchdog_disable() watchdog_nmi_disable() perf_event_release_kernel(); put_event() _free_event() ->destroy() := hw_perf_event_destroy() x86_release_hardware() release_ds_buffers() get_online_cpus() when a per cpu watchdog perf event is destroyed which drops the last reference to the PMU hardware. The cleanup code there invokes get_online_cpus() which instantly deadlocks because the hotplug percpu rwsem is write locked. To solve this add a deferring mechanism: cpus_write_lock() kthread_park() watchdog_nmi_disable(deferred) perf_event_disable(event); move_event_to_deferred(event); .... cpus_write_unlock() cleaup_deferred_events() perf_event_release_kernel() This is still properly serialized against concurrent hotplug via the cpu_add_remove_lock, which is held by the task which initiated the hotplug event. This is also used to handle event destruction when the watchdog threads are parked via other mechanisms than CPU hotplug. Analyzed-by: Peter Zijlstra <peterz@infradead.org> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Don Zickus <dzickus@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Ulrich Obergfell <uobergfe@redhat.com> Link: http://lkml.kernel.org/r/20170912194146.884469246@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-12 19:37:04 +00:00
/*
* Do post unplug cleanup. This is still protected against
* concurrent CPU hotplug via cpu_add_remove_lock.
*/
lockup_detector_cleanup();
x86/speculation: Rework SMT state change arch_smt_update() is only called when the sysfs SMT control knob is changed. This means that when SMT is enabled in the sysfs control knob the system is considered to have SMT active even if all siblings are offline. To allow finegrained control of the speculation mitigations, the actual SMT state is more interesting than the fact that siblings could be enabled. Rework the code, so arch_smt_update() is invoked from each individual CPU hotplug function, and simplify the update function while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
2018-11-25 18:33:39 +00:00
arch_smt_update();
cpu/hotplug: Cure the cpusets trainwreck Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered. cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order. As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed. The same is true for CPU unplug, but that does not create user observable failure (yet). It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable. Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that. So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever. Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock. Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway. This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story. Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it. Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened. Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") Reported-by: Alexey Klimov <aklimov@redhat.com> Reported-by: Joshua Baker <jobaker@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <aklimov@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
2021-03-27 21:01:36 +00:00
cpu_up_down_serialize_trainwrecks(tasks_frozen);
return ret;
}
static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target)
{
if (cpu_hotplug_disabled)
return -EBUSY;
return _cpu_down(cpu, 0, target);
}
static int cpu_down(unsigned int cpu, enum cpuhp_state target)
{
int err;
cpu_maps_update_begin();
err = cpu_down_maps_locked(cpu, target);
cpu_maps_update_done();
return err;
}
/**
* cpu_device_down - Bring down a cpu device
* @dev: Pointer to the cpu device to offline
*
* This function is meant to be used by device core cpu subsystem only.
*
* Other subsystems should use remove_cpu() instead.
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
*
* Return: %0 on success or a negative errno code
*/
int cpu_device_down(struct device *dev)
{
return cpu_down(dev->id, CPUHP_OFFLINE);
}
int remove_cpu(unsigned int cpu)
{
int ret;
lock_device_hotplug();
ret = device_offline(get_cpu_device(cpu));
unlock_device_hotplug();
return ret;
}
EXPORT_SYMBOL_GPL(remove_cpu);
void smp_shutdown_nonboot_cpus(unsigned int primary_cpu)
{
unsigned int cpu;
int error;
cpu_maps_update_begin();
/*
* Make certain the cpu I'm about to reboot on is online.
*
* This is inline to what migrate_to_reboot_cpu() already do.
*/
if (!cpu_online(primary_cpu))
primary_cpu = cpumask_first(cpu_online_mask);
for_each_online_cpu(cpu) {
if (cpu == primary_cpu)
continue;
error = cpu_down_maps_locked(cpu, CPUHP_OFFLINE);
if (error) {
pr_err("Failed to offline CPU%d - error=%d",
cpu, error);
break;
}
}
/*
* Ensure all but the reboot CPU are offline.
*/
BUG_ON(num_online_cpus() > 1);
/*
* Make sure the CPUs won't be enabled by someone else after this
* point. Kexec will reboot to a new kernel shortly resetting
* everything along the way.
*/
cpu_hotplug_disabled++;
cpu_maps_update_done();
}
#else
#define takedown_cpu NULL
#endif /*CONFIG_HOTPLUG_CPU*/
/**
* notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU
* @cpu: cpu that just started
*
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
void notify_cpu_starting(unsigned int cpu)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE);
int ret;
rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */
cpumask_set_cpu(cpu, &cpus_booted_once_mask);
ret = cpuhp_invoke_callback_range(true, cpu, st, target);
/*
* STARTING must not fail!
*/
WARN_ON_ONCE(ret);
}
/*
smp/hotplug: Move unparking of percpu threads to the control CPU Vikram reported the following backtrace: BUG: scheduling while atomic: swapper/7/0/0x00000002 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680 schedule schedule_hrtimeout_range_clock schedule_hrtimeout wait_task_inactive __kthread_bind_mask __kthread_bind __kthread_unpark kthread_unpark cpuhp_online_idle cpu_startup_entry secondary_start_kernel He analyzed correctly that a parked cpu hotplug thread of an offlined CPU was still on the runqueue when the CPU came back online and tried to unpark it. This causes the thread which invoked kthread_unpark() to call wait_task_inactive() and subsequently schedule() with preemption disabled. His proposed workaround was to "make sure" that a parked thread has scheduled out when the CPU goes offline, so the situation cannot happen. But that's still wrong because the root cause is not the fact that the percpu thread is still on the runqueue and neither that preemption is disabled, which could be simply solved by enabling preemption before calling kthread_unpark(). The real issue is that the calling thread is the idle task of the upcoming CPU, which is not supposed to call anything which might sleep. The moron, who wrote that code, missed completely that kthread_unpark() might end up in schedule(). The solution is simpler than expected. The thread which controls the hotplug operation is waiting for the CPU to call complete() on the hotplug state completion. So the idle task of the upcoming CPU can set its state to CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control task on a different CPU, which then can safely do the unpark and kick the now unparked hotplug thread of the upcoming CPU to complete the bringup to the final target state. Control CPU AP bringup_cpu(); __cpu_up() ------------> bringup_ap(); bringup_wait_for_ap() wait_for_completion(); cpuhp_online_idle(); <------------ complete(); unpark(AP->stopper); unpark(AP->hotplugthread); while(1) do_idle(); kick(AP->hotplugthread); wait_for_completion(); hotplug_thread() run_online_callbacks(); complete(); Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up") Reported-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-04 20:20:23 +00:00
* Called from the idle task. Wake up the controlling task which brings the
* hotplug thread of the upcoming CPU up and then delegates the rest of the
* online bringup to the hotplug thread.
*/
void cpuhp_online_idle(enum cpuhp_state state)
{
struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
/* Happens for the boot cpu */
if (state != CPUHP_AP_ONLINE_IDLE)
return;
/*
* Unpart the stopper thread before we start the idle loop (and start
* scheduling); this ensures the stopper task is always available.
*/
stop_machine_unpark(smp_processor_id());
st->state = CPUHP_AP_ONLINE_IDLE;
complete_ap_thread(st, true);
}
/* Requires cpu_add_remove_lock to be held */
static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
struct task_struct *idle;
int ret = 0;
cpus_write_lock();
if (!cpu_present(cpu)) {
ACPI / processor: prevent cpu from becoming online Even if acpi_processor_handle_eject() offlines cpu, there is a chance to online the cpu after that. So the patch closes the window by using get/put_online_cpus(). Why does the patch change _cpu_up() logic? The patch cares the race of hot-remove cpu and _cpu_up(). If the patch does not change it, there is the following race. hot-remove cpu | _cpu_up() ------------------------------------- ------------------------------------ call acpi_processor_handle_eject() | call cpu_down() | call get_online_cpus() | | call cpu_hotplug_begin() and stop here call arch_unregister_cpu() | call acpi_unmap_lsapic() | call put_online_cpus() | | start and continue _cpu_up() return acpi_processor_remove() | continue hot-remove the cpu | So _cpu_up() can continue to itself. And hot-remove cpu can also continue itself. If the patch changes _cpu_up() logic, the race disappears as below: hot-remove cpu | _cpu_up() ----------------------------------------------------------------------- call acpi_processor_handle_eject() | call cpu_down() | call get_online_cpus() | | call cpu_hotplug_begin() and stop here call arch_unregister_cpu() | call acpi_unmap_lsapic() | cpu's cpu_present is set | to false by set_cpu_present()| call put_online_cpus() | | start _cpu_up() | check cpu_present() and return -EINVAL return acpi_processor_remove() | continue hot-remove the cpu | Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-22 23:30:54 +00:00
ret = -EINVAL;
goto out;
}
/*
* The caller of cpu_up() might have raced with another
* caller. Nothing to do.
*/
if (st->state >= target)
goto out;
if (st->state == CPUHP_OFFLINE) {
/* Let it fail before we try to bring the cpu up */
idle = idle_thread_get(cpu);
if (IS_ERR(idle)) {
ret = PTR_ERR(idle);
goto out;
}
}
cpuhp_tasks_frozen = tasks_frozen;
cpuhp_set_state(st, target);
/*
* If the current CPU state is in the range of the AP hotplug thread,
* then we need to kick the thread once more.
*/
if (st->state > CPUHP_BRINGUP_CPU) {
ret = cpuhp_kick_ap_work(cpu);
/*
* The AP side has done the error rollback already. Just
* return the error code..
*/
if (ret)
goto out;
}
/*
* Try to reach the target state. We max out on the BP at
* CPUHP_BRINGUP_CPU. After that the AP hotplug thread is
* responsible for bringing it up to the target state.
*/
target = min((int)target, CPUHP_BRINGUP_CPU);
ret = cpuhp_up_callbacks(cpu, st, target);
out:
cpus_write_unlock();
x86/speculation: Rework SMT state change arch_smt_update() is only called when the sysfs SMT control knob is changed. This means that when SMT is enabled in the sysfs control knob the system is considered to have SMT active even if all siblings are offline. To allow finegrained control of the speculation mitigations, the actual SMT state is more interesting than the fact that siblings could be enabled. Rework the code, so arch_smt_update() is invoked from each individual CPU hotplug function, and simplify the update function while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
2018-11-25 18:33:39 +00:00
arch_smt_update();
cpu/hotplug: Cure the cpusets trainwreck Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered. cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order. As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed. The same is true for CPU unplug, but that does not create user observable failure (yet). It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable. Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that. So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever. Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock. Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway. This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story. Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it. Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened. Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") Reported-by: Alexey Klimov <aklimov@redhat.com> Reported-by: Joshua Baker <jobaker@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <aklimov@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
2021-03-27 21:01:36 +00:00
cpu_up_down_serialize_trainwrecks(tasks_frozen);
return ret;
}
static int cpu_up(unsigned int cpu, enum cpuhp_state target)
{
int err = 0;
if (!cpu_possible(cpu)) {
pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n",
cpu);
#if defined(CONFIG_IA64)
pr_err("please check additional_cpus= boot parameter\n");
#endif
return -EINVAL;
}
err = try_online_node(cpu_to_node(cpu));
if (err)
return err;
cpu_maps_update_begin();
cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) This is based on Linus' idea of creating cpu_active_map that prevents scheduler load balancer from migrating tasks to the cpu that is going down. It allows us to simplify domain management code and avoid unecessary domain rebuilds during cpu hotplug event handling. Please ignore the cpusets part for now. It needs some more work in order to avoid crazy lock nesting. Although I did simplfy and unify domain reinitialization logic. We now simply call partition_sched_domains() in all the cases. This means that we're using exact same code paths as in cpusets case and hence the test below cover cpusets too. Cpuset changes to make rebuild_sched_domains() callable from various contexts are in the separate patch (right next after this one). This not only boots but also easily handles while true; do make clean; make -j 8; done and while true; do on-off-cpu 1; done at the same time. (on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing). Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing this on right now in gnome-terminal and things are moving just fine. Also this is running with most of the debug features enabled (lockdep, mutex, etc) no BUG_ONs or lockdep complaints so far. I believe I addressed all of the Dmitry's comments for original Linus' version. I changed both fair and rt balancer to mask out non-active cpus. And replaced cpu_is_offline() with !cpu_active() in the main scheduler code where it made sense (to me). Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Gregory Haskins <ghaskins@novell.com> Cc: dmitry.adamushko@gmail.com Cc: pj@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 11:43:49 +00:00
if (cpu_hotplug_disabled) {
err = -EBUSY;
cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) This is based on Linus' idea of creating cpu_active_map that prevents scheduler load balancer from migrating tasks to the cpu that is going down. It allows us to simplify domain management code and avoid unecessary domain rebuilds during cpu hotplug event handling. Please ignore the cpusets part for now. It needs some more work in order to avoid crazy lock nesting. Although I did simplfy and unify domain reinitialization logic. We now simply call partition_sched_domains() in all the cases. This means that we're using exact same code paths as in cpusets case and hence the test below cover cpusets too. Cpuset changes to make rebuild_sched_domains() callable from various contexts are in the separate patch (right next after this one). This not only boots but also easily handles while true; do make clean; make -j 8; done and while true; do on-off-cpu 1; done at the same time. (on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing). Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing this on right now in gnome-terminal and things are moving just fine. Also this is running with most of the debug features enabled (lockdep, mutex, etc) no BUG_ONs or lockdep complaints so far. I believe I addressed all of the Dmitry's comments for original Linus' version. I changed both fair and rt balancer to mask out non-active cpus. And replaced cpu_is_offline() with !cpu_active() in the main scheduler code where it made sense (to me). Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Gregory Haskins <ghaskins@novell.com> Cc: dmitry.adamushko@gmail.com Cc: pj@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 11:43:49 +00:00
goto out;
}
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
if (!cpu_smt_allowed(cpu)) {
err = -EPERM;
goto out;
}
cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) This is based on Linus' idea of creating cpu_active_map that prevents scheduler load balancer from migrating tasks to the cpu that is going down. It allows us to simplify domain management code and avoid unecessary domain rebuilds during cpu hotplug event handling. Please ignore the cpusets part for now. It needs some more work in order to avoid crazy lock nesting. Although I did simplfy and unify domain reinitialization logic. We now simply call partition_sched_domains() in all the cases. This means that we're using exact same code paths as in cpusets case and hence the test below cover cpusets too. Cpuset changes to make rebuild_sched_domains() callable from various contexts are in the separate patch (right next after this one). This not only boots but also easily handles while true; do make clean; make -j 8; done and while true; do on-off-cpu 1; done at the same time. (on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing). Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing this on right now in gnome-terminal and things are moving just fine. Also this is running with most of the debug features enabled (lockdep, mutex, etc) no BUG_ONs or lockdep complaints so far. I believe I addressed all of the Dmitry's comments for original Linus' version. I changed both fair and rt balancer to mask out non-active cpus. And replaced cpu_is_offline() with !cpu_active() in the main scheduler code where it made sense (to me). Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Gregory Haskins <ghaskins@novell.com> Cc: dmitry.adamushko@gmail.com Cc: pj@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 11:43:49 +00:00
err = _cpu_up(cpu, 0, target);
cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) This is based on Linus' idea of creating cpu_active_map that prevents scheduler load balancer from migrating tasks to the cpu that is going down. It allows us to simplify domain management code and avoid unecessary domain rebuilds during cpu hotplug event handling. Please ignore the cpusets part for now. It needs some more work in order to avoid crazy lock nesting. Although I did simplfy and unify domain reinitialization logic. We now simply call partition_sched_domains() in all the cases. This means that we're using exact same code paths as in cpusets case and hence the test below cover cpusets too. Cpuset changes to make rebuild_sched_domains() callable from various contexts are in the separate patch (right next after this one). This not only boots but also easily handles while true; do make clean; make -j 8; done and while true; do on-off-cpu 1; done at the same time. (on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing). Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing this on right now in gnome-terminal and things are moving just fine. Also this is running with most of the debug features enabled (lockdep, mutex, etc) no BUG_ONs or lockdep complaints so far. I believe I addressed all of the Dmitry's comments for original Linus' version. I changed both fair and rt balancer to mask out non-active cpus. And replaced cpu_is_offline() with !cpu_active() in the main scheduler code where it made sense (to me). Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Gregory Haskins <ghaskins@novell.com> Cc: dmitry.adamushko@gmail.com Cc: pj@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 11:43:49 +00:00
out:
cpu_maps_update_done();
return err;
}
/**
* cpu_device_up - Bring up a cpu device
* @dev: Pointer to the cpu device to online
*
* This function is meant to be used by device core cpu subsystem only.
*
* Other subsystems should use add_cpu() instead.
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
*
* Return: %0 on success or a negative errno code
*/
int cpu_device_up(struct device *dev)
{
return cpu_up(dev->id, CPUHP_ONLINE);
}
int add_cpu(unsigned int cpu)
{
int ret;
lock_device_hotplug();
ret = device_online(get_cpu_device(cpu));
unlock_device_hotplug();
return ret;
}
EXPORT_SYMBOL_GPL(add_cpu);
/**
* bringup_hibernate_cpu - Bring up the CPU that we hibernated on
* @sleep_cpu: The cpu we hibernated on and should be brought up.
*
* On some architectures like arm64, we can hibernate on any CPU, but on
* wake up the CPU we hibernated on might be offline as a side effect of
* using maxcpus= for example.
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
*
* Return: %0 on success or a negative errno code
*/
int bringup_hibernate_cpu(unsigned int sleep_cpu)
{
int ret;
if (!cpu_online(sleep_cpu)) {
pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n");
ret = cpu_up(sleep_cpu, CPUHP_ONLINE);
if (ret) {
pr_err("Failed to bring hibernate-CPU up!\n");
return ret;
}
}
return 0;
}
void bringup_nonboot_cpus(unsigned int setup_max_cpus)
{
unsigned int cpu;
for_each_present_cpu(cpu) {
if (num_online_cpus() >= setup_max_cpus)
break;
if (!cpu_online(cpu))
cpu_up(cpu, CPUHP_ONLINE);
}
}
#ifdef CONFIG_PM_SLEEP_SMP
static cpumask_var_t frozen_cpus;
int freeze_secondary_cpus(int primary)
{
int cpu, error = 0;
cpu_maps_update_begin();
if (primary == -1) {
primary = cpumask_first(cpu_online_mask);
if (!housekeeping_cpu(primary, HK_FLAG_TIMER))
primary = housekeeping_any_cpu(HK_FLAG_TIMER);
} else {
if (!cpu_online(primary))
primary = cpumask_first(cpu_online_mask);
}
/*
* We take down all of the non-boot CPUs in one shot to avoid races
* with the userspace trying to use the CPU hotplug at the same time
*/
cpumask_clear(frozen_cpus);
pr_info("Disabling non-boot CPUs ...\n");
for_each_online_cpu(cpu) {
if (cpu == primary)
continue;
if (pm_wakeup_pending()) {
pr_info("Wakeup pending. Abort CPU freeze\n");
error = -EBUSY;
break;
}
trace_suspend_resume(TPS("CPU_OFF"), cpu, true);
error = _cpu_down(cpu, 1, CPUHP_OFFLINE);
trace_suspend_resume(TPS("CPU_OFF"), cpu, false);
if (!error)
cpumask_set_cpu(cpu, frozen_cpus);
else {
pr_err("Error taking CPU%d down: %d\n", cpu, error);
break;
}
}
if (!error)
BUG_ON(num_online_cpus() > 1);
else
pr_err("Non-boot CPUs are not disabled\n");
/*
* Make sure the CPUs won't be enabled by someone else. We need to do
* this even in case of failure as all freeze_secondary_cpus() users are
* supposed to do thaw_secondary_cpus() on the failure path.
*/
cpu_hotplug_disabled++;
cpu_maps_update_done();
return error;
}
void __weak arch_thaw_secondary_cpus_begin(void)
{
}
void __weak arch_thaw_secondary_cpus_end(void)
{
}
void thaw_secondary_cpus(void)
{
int cpu, error;
/* Allow everyone to use the CPU hotplug again */
cpu_maps_update_begin();
__cpu_hotplug_enable();
if (cpumask_empty(frozen_cpus))
goto out;
pr_info("Enabling non-boot CPUs ...\n");
arch_thaw_secondary_cpus_begin();
for_each_cpu(cpu, frozen_cpus) {
trace_suspend_resume(TPS("CPU_ON"), cpu, true);
error = _cpu_up(cpu, 1, CPUHP_ONLINE);
trace_suspend_resume(TPS("CPU_ON"), cpu, false);
if (!error) {
pr_info("CPU%d is up\n", cpu);
continue;
}
pr_warn("Error taking CPU%d up: %d\n", cpu, error);
}
arch_thaw_secondary_cpus_end();
cpumask_clear(frozen_cpus);
out:
cpu_maps_update_done();
}
static int __init alloc_frozen_cpus(void)
{
if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO))
return -ENOMEM;
return 0;
}
core_initcall(alloc_frozen_cpus);
/*
* When callbacks for CPU hotplug notifications are being executed, we must
* ensure that the state of the system with respect to the tasks being frozen
* or not, as reported by the notification, remains unchanged *throughout the
* duration* of the execution of the callbacks.
* Hence we need to prevent the freezer from racing with regular CPU hotplug.
*
* This synchronization is implemented by mutually excluding regular CPU
* hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
* Hibernate notifications.
*/
static int
cpu_hotplug_pm_callback(struct notifier_block *nb,
unsigned long action, void *ptr)
{
switch (action) {
case PM_SUSPEND_PREPARE:
case PM_HIBERNATION_PREPARE:
cpu_hotplug_disable();
break;
case PM_POST_SUSPEND:
case PM_POST_HIBERNATION:
cpu_hotplug_enable();
break;
default:
return NOTIFY_DONE;
}
return NOTIFY_OK;
}
static int __init cpu_hotplug_pm_sync_init(void)
{
/*
* cpu_hotplug_pm_callback has higher priority than x86
* bsp_pm_callback which depends on cpu_hotplug_pm_callback
* to disable cpu hotplug to avoid cpu hotplug race.
*/
pm_notifier(cpu_hotplug_pm_callback, 0);
return 0;
}
core_initcall(cpu_hotplug_pm_sync_init);
#endif /* CONFIG_PM_SLEEP_SMP */
int __boot_cpu_id;
#endif /* CONFIG_SMP */
/* Boot processor state steps */
static struct cpuhp_step cpuhp_hp_states[] = {
[CPUHP_OFFLINE] = {
.name = "offline",
.startup.single = NULL,
.teardown.single = NULL,
},
#ifdef CONFIG_SMP
[CPUHP_CREATE_THREADS]= {
.name = "threads:prepare",
.startup.single = smpboot_create_threads,
.teardown.single = NULL,
.cant_stop = true,
},
[CPUHP_PERF_PREPARE] = {
.name = "perf:prepare",
.startup.single = perf_event_init_cpu,
.teardown.single = perf_event_exit_cpu,
},
[CPUHP_WORKQUEUE_PREP] = {
.name = "workqueue:prepare",
.startup.single = workqueue_prepare_cpu,
.teardown.single = NULL,
},
[CPUHP_HRTIMERS_PREPARE] = {
.name = "hrtimers:prepare",
.startup.single = hrtimers_prepare_cpu,
.teardown.single = hrtimers_dead_cpu,
},
[CPUHP_SMPCFD_PREPARE] = {
.name = "smpcfd:prepare",
.startup.single = smpcfd_prepare_cpu,
.teardown.single = smpcfd_dead_cpu,
},
[CPUHP_RELAY_PREPARE] = {
.name = "relay:prepare",
.startup.single = relay_prepare_cpu,
.teardown.single = NULL,
},
[CPUHP_SLAB_PREPARE] = {
.name = "slab:prepare",
.startup.single = slab_prepare_cpu,
.teardown.single = slab_dead_cpu,
},
[CPUHP_RCUTREE_PREP] = {
.name = "RCU/tree:prepare",
.startup.single = rcutree_prepare_cpu,
.teardown.single = rcutree_dead_cpu,
},
/*
* On the tear-down path, timers_dead_cpu() must be invoked
* before blk_mq_queue_reinit_notify() from notify_dead(),
* otherwise a RCU stall occurs.
*/
[CPUHP_TIMERS_PREPARE] = {
.name = "timers:prepare",
.startup.single = timers_prepare_cpu,
.teardown.single = timers_dead_cpu,
},
/* Kicks the plugged cpu into life */
[CPUHP_BRINGUP_CPU] = {
.name = "cpu:bringup",
.startup.single = bringup_cpu,
sched/core: Fix illegal RCU from offline CPUs In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
2020-04-01 21:40:33 +00:00
.teardown.single = finish_cpu,
.cant_stop = true,
},
/* Final state before CPU kills itself */
[CPUHP_AP_IDLE_DEAD] = {
.name = "idle:dead",
},
/*
* Last state before CPU enters the idle loop to die. Transient state
* for synchronization.
*/
[CPUHP_AP_OFFLINE] = {
.name = "ap:offline",
.cant_stop = true,
},
/* First state is scheduler control. Interrupts are disabled */
[CPUHP_AP_SCHED_STARTING] = {
.name = "sched:starting",
.startup.single = sched_cpu_starting,
.teardown.single = sched_cpu_dying,
},
[CPUHP_AP_RCUTREE_DYING] = {
.name = "RCU/tree:dying",
.startup.single = NULL,
.teardown.single = rcutree_dying_cpu,
},
[CPUHP_AP_SMPCFD_DYING] = {
.name = "smpcfd:dying",
.startup.single = NULL,
.teardown.single = smpcfd_dying_cpu,
},
/* Entry state on starting. Interrupts enabled from here on. Transient
* state for synchronsization */
[CPUHP_AP_ONLINE] = {
.name = "ap:online",
},
/*
* Handled on control processor until the plugged processor manages
* this itself.
*/
[CPUHP_TEARDOWN_CPU] = {
.name = "cpu:teardown",
.startup.single = NULL,
.teardown.single = takedown_cpu,
.cant_stop = true,
},
[CPUHP_AP_SCHED_WAIT_EMPTY] = {
.name = "sched:waitempty",
.startup.single = NULL,
.teardown.single = sched_cpu_wait_empty,
},
/* Handle smpboot threads park/unpark */
[CPUHP_AP_SMPBOOT_THREADS] = {
.name = "smpboot/threads:online",
.startup.single = smpboot_unpark_threads,
.teardown.single = smpboot_park_threads,
},
genirq/cpuhotplug: Handle managed IRQs on CPU hotplug If a CPU goes offline, interrupts affine to the CPU are moved away. If the outgoing CPU is the last CPU in the affinity mask the migration code breaks the affinity and sets it it all online cpus. This is a problem for affinity managed interrupts as CPU hotplug is often used for power management purposes. If the affinity is broken, the interrupt is not longer affine to the CPUs to which it was allocated. The affinity spreading allows to lay out multi queue devices in a way that they are assigned to a single CPU or a group of CPUs. If the last CPU goes offline, then the queue is not longer used, so the interrupt can be shutdown gracefully and parked until one of the assigned CPUs comes online again. Add a graceful shutdown mechanism into the irq affinity breaking code path, mark the irq as MANAGED_SHUTDOWN and leave the affinity mask unmodified. In the online path, scan the active interrupts for managed interrupts and if the interrupt is functional and the newly online CPU is part of the affinity mask, restart the interrupt if it is marked MANAGED_SHUTDOWN or if the interrupts is started up, try to add the CPU back to the effective affinity mask. Originally-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619235447.273417334@linutronix.de
2017-06-19 23:37:51 +00:00
[CPUHP_AP_IRQ_AFFINITY_ONLINE] = {
.name = "irq/affinity:online",
.startup.single = irq_affinity_online_cpu,
.teardown.single = NULL,
},
[CPUHP_AP_PERF_ONLINE] = {
.name = "perf:online",
.startup.single = perf_event_init_cpu,
.teardown.single = perf_event_exit_cpu,
},
[CPUHP_AP_WATCHDOG_ONLINE] = {
.name = "lockup_detector:online",
.startup.single = lockup_detector_online_cpu,
.teardown.single = lockup_detector_offline_cpu,
},
[CPUHP_AP_WORKQUEUE_ONLINE] = {
.name = "workqueue:online",
.startup.single = workqueue_online_cpu,
.teardown.single = workqueue_offline_cpu,
},
[CPUHP_AP_RCUTREE_ONLINE] = {
.name = "RCU/tree:online",
.startup.single = rcutree_online_cpu,
.teardown.single = rcutree_offline_cpu,
},
#endif
/*
* The dynamically registered state space is here
*/
#ifdef CONFIG_SMP
/* Last state is scheduler control setting the cpu active */
[CPUHP_AP_ACTIVE] = {
.name = "sched:active",
.startup.single = sched_cpu_activate,
.teardown.single = sched_cpu_deactivate,
},
#endif
/* CPU is fully up and running. */
[CPUHP_ONLINE] = {
.name = "online",
.startup.single = NULL,
.teardown.single = NULL,
},
};
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
/* Sanity check for callbacks */
static int cpuhp_cb_check(enum cpuhp_state state)
{
if (state <= CPUHP_OFFLINE || state >= CPUHP_ONLINE)
return -EINVAL;
return 0;
}
/*
* Returns a free for dynamic slot assignment of the Online state. The states
* are protected by the cpuhp_slot_states mutex and an empty slot is identified
* by having no name assigned.
*/
static int cpuhp_reserve_state(enum cpuhp_state state)
{
enum cpuhp_state i, end;
struct cpuhp_step *step;
switch (state) {
case CPUHP_AP_ONLINE_DYN:
step = cpuhp_hp_states + CPUHP_AP_ONLINE_DYN;
end = CPUHP_AP_ONLINE_DYN_END;
break;
case CPUHP_BP_PREPARE_DYN:
step = cpuhp_hp_states + CPUHP_BP_PREPARE_DYN;
end = CPUHP_BP_PREPARE_DYN_END;
break;
default:
return -EINVAL;
}
for (i = state; i <= end; i++, step++) {
if (!step->name)
return i;
}
WARN(1, "No more dynamic states available for CPU hotplug\n");
return -ENOSPC;
}
static int cpuhp_store_callbacks(enum cpuhp_state state, const char *name,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu),
bool multi_instance)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
{
/* (Un)Install the callbacks for further cpu hotplug operations */
struct cpuhp_step *sp;
int ret = 0;
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
/*
* If name is NULL, then the state gets removed.
*
* CPUHP_AP_ONLINE_DYN and CPUHP_BP_PREPARE_DYN are handed out on
* the first allocation from these dynamic ranges, so the removal
* would trigger a new allocation and clear the wrong (already
* empty) state, leaving the callbacks of the to be cleared state
* dangling, which causes wreckage on the next hotplug operation.
*/
if (name && (state == CPUHP_AP_ONLINE_DYN ||
state == CPUHP_BP_PREPARE_DYN)) {
ret = cpuhp_reserve_state(state);
if (ret < 0)
return ret;
state = ret;
}
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
sp = cpuhp_get_step(state);
if (name && sp->name)
return -EBUSY;
sp->startup.single = startup;
sp->teardown.single = teardown;
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
sp->name = name;
sp->multi_instance = multi_instance;
INIT_HLIST_HEAD(&sp->list);
return ret;
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
}
static void *cpuhp_get_teardown_cb(enum cpuhp_state state)
{
return cpuhp_get_step(state)->teardown.single;
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
}
/*
* Call the startup/teardown function for a step either on the AP or
* on the current CPU.
*/
static int cpuhp_issue_call(int cpu, enum cpuhp_state state, bool bringup,
struct hlist_node *node)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
{
struct cpuhp_step *sp = cpuhp_get_step(state);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
int ret;
/*
* If there's nothing to do, we done.
* Relies on the union for multi_instance.
*/
if (cpuhp_step_empty(bringup, sp))
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
return 0;
/*
* The non AP bound callbacks can fail on bringup. On teardown
* e.g. module removal we crash for now.
*/
#ifdef CONFIG_SMP
if (cpuhp_is_ap_state(state))
ret = cpuhp_invoke_ap_callback(cpu, state, bringup, node);
else
ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
#else
ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
#endif
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
BUG_ON(ret && !bringup);
return ret;
}
/*
* Called from __cpuhp_setup_state on a recoverable failure.
*
* Note: The teardown callbacks for rollback are not allowed to fail!
*/
static void cpuhp_rollback_install(int failedcpu, enum cpuhp_state state,
struct hlist_node *node)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
{
int cpu;
/* Roll back the already executed steps on the other cpus */
for_each_present_cpu(cpu) {
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int cpustate = st->state;
if (cpu >= failedcpu)
break;
/* Did we invoke the startup call on that cpu ? */
if (cpustate >= state)
cpuhp_issue_call(cpu, state, false, node);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
}
}
int __cpuhp_state_add_instance_cpuslocked(enum cpuhp_state state,
struct hlist_node *node,
bool invoke)
{
struct cpuhp_step *sp;
int cpu;
int ret;
lockdep_assert_cpus_held();
sp = cpuhp_get_step(state);
if (sp->multi_instance == false)
return -EINVAL;
mutex_lock(&cpuhp_state_mutex);
if (!invoke || !sp->startup.multi)
goto add_node;
/*
* Try to call the startup callback for each present cpu
* depending on the hotplug state of the cpu.
*/
for_each_present_cpu(cpu) {
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int cpustate = st->state;
if (cpustate < state)
continue;
ret = cpuhp_issue_call(cpu, state, true, node);
if (ret) {
if (sp->teardown.multi)
cpuhp_rollback_install(cpu, state, node);
goto unlock;
}
}
add_node:
ret = 0;
hlist_add_head(node, &sp->list);
unlock:
mutex_unlock(&cpuhp_state_mutex);
return ret;
}
int __cpuhp_state_add_instance(enum cpuhp_state state, struct hlist_node *node,
bool invoke)
{
int ret;
cpus_read_lock();
ret = __cpuhp_state_add_instance_cpuslocked(state, node, invoke);
cpus_read_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(__cpuhp_state_add_instance);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
/**
* __cpuhp_setup_state_cpuslocked - Setup the callbacks for an hotplug machine state
* @state: The state to setup
* @name: Name of the step
* @invoke: If true, the startup function is invoked for cpus where
* cpu state >= @state
* @startup: startup callback function
* @teardown: teardown callback function
* @multi_instance: State is set up for multiple instances which get
* added afterwards.
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
*
* The caller needs to hold cpus read locked while calling this function.
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* Return:
* On success:
cpu/hotplug: Eliminate all kernel-doc warnings kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-09 22:38:25 +00:00
* Positive state number if @state is CPUHP_AP_ONLINE_DYN;
* 0 for all other states
* On failure: proper (negative) error code
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
*/
int __cpuhp_setup_state_cpuslocked(enum cpuhp_state state,
const char *name, bool invoke,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu),
bool multi_instance)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
{
int cpu, ret = 0;
bool dynstate;
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
lockdep_assert_cpus_held();
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
if (cpuhp_cb_check(state) || !name)
return -EINVAL;
mutex_lock(&cpuhp_state_mutex);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
ret = cpuhp_store_callbacks(state, name, startup, teardown,
multi_instance);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
dynstate = state == CPUHP_AP_ONLINE_DYN;
if (ret > 0 && dynstate) {
state = ret;
ret = 0;
}
if (ret || !invoke || !startup)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
goto out;
/*
* Try to call the startup callback for each present cpu
* depending on the hotplug state of the cpu.
*/
for_each_present_cpu(cpu) {
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int cpustate = st->state;
if (cpustate < state)
continue;
ret = cpuhp_issue_call(cpu, state, true, NULL);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
if (ret) {
if (teardown)
cpuhp_rollback_install(cpu, state, NULL);
cpuhp_store_callbacks(state, NULL, NULL, NULL, false);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
goto out;
}
}
out:
mutex_unlock(&cpuhp_state_mutex);
/*
* If the requested state is CPUHP_AP_ONLINE_DYN, return the
* dynamically allocated state in case of success.
*/
if (!ret && dynstate)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
return state;
return ret;
}
EXPORT_SYMBOL(__cpuhp_setup_state_cpuslocked);
int __cpuhp_setup_state(enum cpuhp_state state,
const char *name, bool invoke,
int (*startup)(unsigned int cpu),
int (*teardown)(unsigned int cpu),
bool multi_instance)
{
int ret;
cpus_read_lock();
ret = __cpuhp_setup_state_cpuslocked(state, name, invoke, startup,
teardown, multi_instance);
cpus_read_unlock();
return ret;
}
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
EXPORT_SYMBOL(__cpuhp_setup_state);
int __cpuhp_state_remove_instance(enum cpuhp_state state,
struct hlist_node *node, bool invoke)
{
struct cpuhp_step *sp = cpuhp_get_step(state);
int cpu;
BUG_ON(cpuhp_cb_check(state));
if (!sp->multi_instance)
return -EINVAL;
cpus_read_lock();
mutex_lock(&cpuhp_state_mutex);
if (!invoke || !cpuhp_get_teardown_cb(state))
goto remove;
/*
* Call the teardown callback for each present cpu depending
* on the hotplug state of the cpu. This function is not
* allowed to fail currently!
*/
for_each_present_cpu(cpu) {
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int cpustate = st->state;
if (cpustate >= state)
cpuhp_issue_call(cpu, state, false, node);
}
remove:
hlist_del(node);
mutex_unlock(&cpuhp_state_mutex);
cpus_read_unlock();
return 0;
}
EXPORT_SYMBOL_GPL(__cpuhp_state_remove_instance);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
/**
* __cpuhp_remove_state_cpuslocked - Remove the callbacks for an hotplug machine state
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
* @state: The state to remove
* @invoke: If true, the teardown function is invoked for cpus where
* cpu state >= @state
*
* The caller needs to hold cpus read locked while calling this function.
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
* The teardown callback is currently not allowed to fail. Think
* about module removal!
*/
void __cpuhp_remove_state_cpuslocked(enum cpuhp_state state, bool invoke)
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
{
struct cpuhp_step *sp = cpuhp_get_step(state);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
int cpu;
BUG_ON(cpuhp_cb_check(state));
lockdep_assert_cpus_held();
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
mutex_lock(&cpuhp_state_mutex);
if (sp->multi_instance) {
WARN(!hlist_empty(&sp->list),
"Error: Removing state %d which has instances left.\n",
state);
goto remove;
}
if (!invoke || !cpuhp_get_teardown_cb(state))
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
goto remove;
/*
* Call the teardown callback for each present cpu depending
* on the hotplug state of the cpu. This function is not
* allowed to fail currently!
*/
for_each_present_cpu(cpu) {
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
int cpustate = st->state;
if (cpustate >= state)
cpuhp_issue_call(cpu, state, false, NULL);
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
}
remove:
cpuhp_store_callbacks(state, NULL, NULL, NULL, false);
mutex_unlock(&cpuhp_state_mutex);
}
EXPORT_SYMBOL(__cpuhp_remove_state_cpuslocked);
void __cpuhp_remove_state(enum cpuhp_state state, bool invoke)
{
cpus_read_lock();
__cpuhp_remove_state_cpuslocked(state, invoke);
cpus_read_unlock();
cpu/hotplug: Implement setup/removal interface Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-26 18:43:33 +00:00
}
EXPORT_SYMBOL(__cpuhp_remove_state);
#ifdef CONFIG_HOTPLUG_SMT
static void cpuhp_offline_cpu_device(unsigned int cpu)
{
struct device *dev = get_cpu_device(cpu);
dev->offline = true;
/* Tell user space about the state change */
kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
}
static void cpuhp_online_cpu_device(unsigned int cpu)
{
struct device *dev = get_cpu_device(cpu);
dev->offline = false;
/* Tell user space about the state change */
kobject_uevent(&dev->kobj, KOBJ_ONLINE);
}
int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
{
int cpu, ret = 0;
cpu_maps_update_begin();
for_each_online_cpu(cpu) {
if (topology_is_primary_thread(cpu))
continue;
ret = cpu_down_maps_locked(cpu, CPUHP_OFFLINE);
if (ret)
break;
/*
* As this needs to hold the cpu maps lock it's impossible
* to call device_offline() because that ends up calling
* cpu_down() which takes cpu maps lock. cpu maps lock
* needs to be held as this might race against in kernel
* abusers of the hotplug machinery (thermal management).
*
* So nothing would update device:offline state. That would
* leave the sysfs entry stale and prevent onlining after
* smt control has been changed to 'off' again. This is
* called under the sysfs hotplug lock, so it is properly
* serialized against the regular offline usage.
*/
cpuhp_offline_cpu_device(cpu);
}
if (!ret)
cpu_smt_control = ctrlval;
cpu_maps_update_done();
return ret;
}
int cpuhp_smt_enable(void)
{
int cpu, ret = 0;
cpu_maps_update_begin();
cpu_smt_control = CPU_SMT_ENABLED;
for_each_present_cpu(cpu) {
/* Skip online CPUs and CPUs on offline nodes */
if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))
continue;
ret = _cpu_up(cpu, 0, CPUHP_ONLINE);
if (ret)
break;
/* See comment in cpuhp_smt_disable() */
cpuhp_online_cpu_device(cpu);
}
cpu_maps_update_done();
return ret;
}
#endif
#if defined(CONFIG_SYSFS) && defined(CONFIG_HOTPLUG_CPU)
static ssize_t state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
return sprintf(buf, "%d\n", st->state);
}
static DEVICE_ATTR_RO(state);
static ssize_t target_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
struct cpuhp_step *sp;
int target, ret;
ret = kstrtoint(buf, 10, &target);
if (ret)
return ret;
#ifdef CONFIG_CPU_HOTPLUG_STATE_CONTROL
if (target < CPUHP_OFFLINE || target > CPUHP_ONLINE)
return -EINVAL;
#else
if (target != CPUHP_OFFLINE && target != CPUHP_ONLINE)
return -EINVAL;
#endif
ret = lock_device_hotplug_sysfs();
if (ret)
return ret;
mutex_lock(&cpuhp_state_mutex);
sp = cpuhp_get_step(target);
ret = !sp->name || sp->cant_stop ? -EINVAL : 0;
mutex_unlock(&cpuhp_state_mutex);
if (ret)
goto out;
if (st->state < target)
ret = cpu_up(dev->id, target);
else
ret = cpu_down(dev->id, target);
out:
unlock_device_hotplug();
return ret ? ret : count;
}
static ssize_t target_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
return sprintf(buf, "%d\n", st->target);
}
static DEVICE_ATTR_RW(target);
static ssize_t fail_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
struct cpuhp_step *sp;
int fail, ret;
ret = kstrtoint(buf, 10, &fail);
if (ret)
return ret;
if (fail == CPUHP_INVALID) {
st->fail = fail;
return count;
}
cpu/hotplug: Fix out-of-bounds read when setting fail state Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail can control `struct cpuhp_step *sp` address, results in the following global-out-of-bounds read. Reproducer: # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail KASAN report: BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0 Read of size 8 at addr ffffffff89734438 by task bash/1941 CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31 Call Trace: write_cpuhp_fail+0x2cd/0x2e0 dev_attr_store+0x58/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f05e4f4c970 The buggy address belongs to the variable: cpu_hotplug_lock+0x98/0xa0 Memory state around the buggy address: ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ^ ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Add a sanity check for the value written from user space. Fixes: 1db49484f21ed ("smp/hotplug: Hotplug state fail injection") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
2019-06-27 02:47:32 +00:00
if (fail < CPUHP_OFFLINE || fail > CPUHP_ONLINE)
return -EINVAL;
/*
* Cannot fail STARTING/DYING callbacks.
*/
if (cpuhp_is_atomic_state(fail))
return -EINVAL;
/*
* DEAD callbacks cannot fail...
* ... neither can CPUHP_BRINGUP_CPU during hotunplug. The latter
* triggering STARTING callbacks, a failure in this state would
* hinder rollback.
*/
if (fail <= CPUHP_BRINGUP_CPU && st->state > CPUHP_BRINGUP_CPU)
return -EINVAL;
/*
* Cannot fail anything that doesn't have callbacks.
*/
mutex_lock(&cpuhp_state_mutex);
sp = cpuhp_get_step(fail);
if (!sp->startup.single && !sp->teardown.single)
ret = -EINVAL;
mutex_unlock(&cpuhp_state_mutex);
if (ret)
return ret;
st->fail = fail;
return count;
}
static ssize_t fail_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
return sprintf(buf, "%d\n", st->fail);
}
static DEVICE_ATTR_RW(fail);
static struct attribute *cpuhp_cpu_attrs[] = {
&dev_attr_state.attr,
&dev_attr_target.attr,
&dev_attr_fail.attr,
NULL
};
static const struct attribute_group cpuhp_cpu_attr_group = {
.attrs = cpuhp_cpu_attrs,
.name = "hotplug",
NULL
};
static ssize_t states_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
ssize_t cur, res = 0;
int i;
mutex_lock(&cpuhp_state_mutex);
for (i = CPUHP_OFFLINE; i <= CPUHP_ONLINE; i++) {
struct cpuhp_step *sp = cpuhp_get_step(i);
if (sp->name) {
cur = sprintf(buf, "%3d: %s\n", i, sp->name);
buf += cur;
res += cur;
}
}
mutex_unlock(&cpuhp_state_mutex);
return res;
}
static DEVICE_ATTR_RO(states);
static struct attribute *cpuhp_cpu_root_attrs[] = {
&dev_attr_states.attr,
NULL
};
static const struct attribute_group cpuhp_cpu_root_attr_group = {
.attrs = cpuhp_cpu_root_attrs,
.name = "hotplug",
NULL
};
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
#ifdef CONFIG_HOTPLUG_SMT
static ssize_t
__store_smt_control(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
{
int ctrlval, ret;
if (sysfs_streq(buf, "on"))
ctrlval = CPU_SMT_ENABLED;
else if (sysfs_streq(buf, "off"))
ctrlval = CPU_SMT_DISABLED;
else if (sysfs_streq(buf, "forceoff"))
ctrlval = CPU_SMT_FORCE_DISABLED;
else
return -EINVAL;
if (cpu_smt_control == CPU_SMT_FORCE_DISABLED)
return -EPERM;
if (cpu_smt_control == CPU_SMT_NOT_SUPPORTED)
return -ENODEV;
ret = lock_device_hotplug_sysfs();
if (ret)
return ret;
if (ctrlval != cpu_smt_control) {
switch (ctrlval) {
case CPU_SMT_ENABLED:
ret = cpuhp_smt_enable();
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
break;
case CPU_SMT_DISABLED:
case CPU_SMT_FORCE_DISABLED:
ret = cpuhp_smt_disable(ctrlval);
break;
}
}
unlock_device_hotplug();
return ret ? ret : count;
}
#else /* !CONFIG_HOTPLUG_SMT */
static ssize_t
__store_smt_control(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
return -ENODEV;
}
#endif /* CONFIG_HOTPLUG_SMT */
static const char *smt_states[] = {
[CPU_SMT_ENABLED] = "on",
[CPU_SMT_DISABLED] = "off",
[CPU_SMT_FORCE_DISABLED] = "forceoff",
[CPU_SMT_NOT_SUPPORTED] = "notsupported",
[CPU_SMT_NOT_IMPLEMENTED] = "notimplemented",
};
static ssize_t control_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
const char *state = smt_states[cpu_smt_control];
return snprintf(buf, PAGE_SIZE - 2, "%s\n", state);
}
static ssize_t control_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
return __store_smt_control(dev, attr, buf, count);
}
static DEVICE_ATTR_RW(control);
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
static ssize_t active_show(struct device *dev,
struct device_attribute *attr, char *buf)
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
{
return snprintf(buf, PAGE_SIZE - 2, "%d\n", sched_smt_active());
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
}
static DEVICE_ATTR_RO(active);
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
static struct attribute *cpuhp_smt_attrs[] = {
&dev_attr_control.attr,
&dev_attr_active.attr,
NULL
};
static const struct attribute_group cpuhp_smt_attr_group = {
.attrs = cpuhp_smt_attrs,
.name = "smt",
NULL
};
static int __init cpu_smt_sysfs_init(void)
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
{
return sysfs_create_group(&cpu_subsys.dev_root->kobj,
&cpuhp_smt_attr_group);
}
static int __init cpuhp_sysfs_init(void)
{
int cpu, ret;
ret = cpu_smt_sysfs_init();
cpu/hotplug: Provide knobs to control SMT Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-05-29 15:48:27 +00:00
if (ret)
return ret;
ret = sysfs_create_group(&cpu_subsys.dev_root->kobj,
&cpuhp_cpu_root_attr_group);
if (ret)
return ret;
for_each_possible_cpu(cpu) {
struct device *dev = get_cpu_device(cpu);
if (!dev)
continue;
ret = sysfs_create_group(&dev->kobj, &cpuhp_cpu_attr_group);
if (ret)
return ret;
}
return 0;
}
device_initcall(cpuhp_sysfs_init);
#endif /* CONFIG_SYSFS && CONFIG_HOTPLUG_CPU */
cpu masks: optimize and clean up cpumask_of_cpu() Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 18:32:33 +00:00
/*
* cpu_bit_bitmap[] is a special, "compressed" data structure that
* represents all NR_CPUS bits binary values of 1<<nr.
*
* It is used by cpumask_of() to get a constant address to a CPU
cpu masks: optimize and clean up cpumask_of_cpu() Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 18:32:33 +00:00
* mask value that has a single bit set only.
*/
cpu masks: optimize and clean up cpumask_of_cpu() Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 18:32:33 +00:00
/* cpu_bit_bitmap[0] is empty - so we can back into it */
#define MASK_DECLARE_1(x) [x+1][0] = (1UL << (x))
cpu masks: optimize and clean up cpumask_of_cpu() Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 18:32:33 +00:00
#define MASK_DECLARE_2(x) MASK_DECLARE_1(x), MASK_DECLARE_1(x+1)
#define MASK_DECLARE_4(x) MASK_DECLARE_2(x), MASK_DECLARE_2(x+2)
#define MASK_DECLARE_8(x) MASK_DECLARE_4(x), MASK_DECLARE_4(x+4)
cpu masks: optimize and clean up cpumask_of_cpu() Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 18:32:33 +00:00
const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = {
MASK_DECLARE_8(0), MASK_DECLARE_8(8),
MASK_DECLARE_8(16), MASK_DECLARE_8(24),
#if BITS_PER_LONG > 32
MASK_DECLARE_8(32), MASK_DECLARE_8(40),
MASK_DECLARE_8(48), MASK_DECLARE_8(56),
#endif
};
cpu masks: optimize and clean up cpumask_of_cpu() Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 18:32:33 +00:00
EXPORT_SYMBOL_GPL(cpu_bit_bitmap);
const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL;
EXPORT_SYMBOL(cpu_all_bits);
#ifdef CONFIG_INIT_ALL_POSSIBLE
struct cpumask __cpu_possible_mask __read_mostly
= {CPU_BITS_ALL};
#else
struct cpumask __cpu_possible_mask __read_mostly;
#endif
EXPORT_SYMBOL(__cpu_possible_mask);
struct cpumask __cpu_online_mask __read_mostly;
EXPORT_SYMBOL(__cpu_online_mask);
struct cpumask __cpu_present_mask __read_mostly;
EXPORT_SYMBOL(__cpu_present_mask);
struct cpumask __cpu_active_mask __read_mostly;
EXPORT_SYMBOL(__cpu_active_mask);
struct cpumask __cpu_dying_mask __read_mostly;
EXPORT_SYMBOL(__cpu_dying_mask);
atomic_t __num_online_cpus __read_mostly;
EXPORT_SYMBOL(__num_online_cpus);
void init_cpu_present(const struct cpumask *src)
{
cpumask_copy(&__cpu_present_mask, src);
}
void init_cpu_possible(const struct cpumask *src)
{
cpumask_copy(&__cpu_possible_mask, src);
}
void init_cpu_online(const struct cpumask *src)
{
cpumask_copy(&__cpu_online_mask, src);
}
void set_cpu_online(unsigned int cpu, bool online)
{
/*
* atomic_inc/dec() is required to handle the horrid abuse of this
* function by the reboot and kexec code which invoke it from
* IPI/NMI broadcasts when shutting down CPUs. Invocation from
* regular CPU hotplug is properly serialized.
*
* Note, that the fact that __num_online_cpus is of type atomic_t
* does not protect readers which are not serialized against
* concurrent hotplug operations.
*/
if (online) {
if (!cpumask_test_and_set_cpu(cpu, &__cpu_online_mask))
atomic_inc(&__num_online_cpus);
} else {
if (cpumask_test_and_clear_cpu(cpu, &__cpu_online_mask))
atomic_dec(&__num_online_cpus);
}
}
/*
* Activate the first processor.
*/
void __init boot_cpu_init(void)
{
int cpu = smp_processor_id();
/* Mark the boot cpu "present", "online" etc for SMP and UP case */
set_cpu_online(cpu, true);
set_cpu_active(cpu, true);
set_cpu_present(cpu, true);
set_cpu_possible(cpu, true);
#ifdef CONFIG_SMP
__boot_cpu_id = cpu;
#endif
}
/*
* Must be called _AFTER_ setting up the per_cpu areas
*/
init: rename and re-order boot_cpu_state_init() This is purely a preparatory patch for upcoming changes during the 4.19 merge window. We have a function called "boot_cpu_state_init()" that isn't really about the bootup cpu state: that is done much earlier by the similarly named "boot_cpu_init()" (note lack of "state" in name). This function initializes some hotplug CPU state, and needs to run after the percpu data has been properly initialized. It even has a comment to that effect. Except it _doesn't_ actually run after the percpu data has been properly initialized. On x86 it happens to do that, but on at least arm and arm64, the percpu base pointers are initialized by the arch-specific 'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init(). This had some unexpected results, and in particular we have a patch pending for the merge window that did the obvious cleanup of using 'this_cpu_write()' in the cpu hotplug init code: - per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE; + this_cpu_write(cpuhp_state.state, CPUHP_ONLINE); which is obviously the right thing to do. Except because of the ordering issue, it actually failed miserably and unexpectedly on arm64. So this just fixes the ordering, and changes the name of the function to be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu hotplug state, because the core CPU state was supposed to have already been done earlier. Marked for stable, since the (not yet merged) patch that will show this problem is marked for stable. Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-12 19:19:42 +00:00
void __init boot_cpu_hotplug_init(void)
{
#ifdef CONFIG_SMP
cpumask_set_cpu(smp_processor_id(), &cpus_booted_once_mask);
#endif
this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);
}
cpu/speculation: Add 'mitigations=' cmdline option Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.com
2019-04-12 20:39:28 +00:00
/*
* These are used for a global "mitigations=" cmdline option for toggling
* optional CPU mitigations.
*/
enum cpu_mitigations {
CPU_MITIGATIONS_OFF,
CPU_MITIGATIONS_AUTO,
CPU_MITIGATIONS_AUTO_NOSMT,
};
static enum cpu_mitigations cpu_mitigations __ro_after_init =
CPU_MITIGATIONS_AUTO;
cpu/speculation: Add 'mitigations=' cmdline option Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.com
2019-04-12 20:39:28 +00:00
static int __init mitigations_parse_cmdline(char *arg)
{
if (!strcmp(arg, "off"))
cpu_mitigations = CPU_MITIGATIONS_OFF;
else if (!strcmp(arg, "auto"))
cpu_mitigations = CPU_MITIGATIONS_AUTO;
else if (!strcmp(arg, "auto,nosmt"))
cpu_mitigations = CPU_MITIGATIONS_AUTO_NOSMT;
else
pr_crit("Unsupported mitigations=%s, system may still be vulnerable\n",
arg);
cpu/speculation: Add 'mitigations=' cmdline option Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.com
2019-04-12 20:39:28 +00:00
return 0;
}
early_param("mitigations", mitigations_parse_cmdline);
/* mitigations=off */
bool cpu_mitigations_off(void)
{
return cpu_mitigations == CPU_MITIGATIONS_OFF;
}
EXPORT_SYMBOL_GPL(cpu_mitigations_off);
/* mitigations=auto,nosmt */
bool cpu_mitigations_auto_nosmt(void)
{
return cpu_mitigations == CPU_MITIGATIONS_AUTO_NOSMT;
}
EXPORT_SYMBOL_GPL(cpu_mitigations_auto_nosmt);