linux/drivers/dma-buf/dma-resv.c

684 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012-2014 Canonical Ltd (Maarten Lankhorst)
*
* Based on bo.c which bears the following copyright notice,
* but is dual licensed:
*
* Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
**************************************************************************/
/*
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
#include <linux/dma-resv.h>
#include <linux/export.h>
#include <linux/mm.h>
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
#include <linux/sched/mm.h>
/**
* DOC: Reservation Object Overview
*
* The reservation object provides a mechanism to manage shared and
* exclusive fences associated with a buffer. A reservation object
* can have attached one exclusive fence (normally associated with
* write operations) or N shared fences (read operations). The RCU
* mechanism is used to protect read access to fences from locked
* write-side updates.
*/
locking: Implement an algorithm choice for Wound-Wait mutexes The current Wound-Wait mutex algorithm is actually not Wound-Wait but Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait is, contrary to Wait-Die a preemptive algorithm and is known to generate fewer backoffs. Testing reveals that this is true if the number of simultaneous contending transactions is small. As the number of simultaneous contending threads increases, Wait-Wound becomes inferior to Wait-Die in terms of elapsed time. Possibly due to the larger number of held locks of sleeping transactions. Update documentation and callers. Timings using git://people.freedesktop.org/~thomash/ww_mutex_test tag patch-18-06-15 Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly chosen out of 100000. Four core Intel x86_64: Algorithm #threads Rollbacks time Wound-Wait 4 ~100 ~17s. Wait-Die 4 ~150000 ~19s. Wound-Wait 16 ~360000 ~109s. Wait-Die 16 ~450000 ~82s. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-06-15 08:17:38 +00:00
DEFINE_WD_CLASS(reservation_ww_class);
EXPORT_SYMBOL(reservation_ww_class);
struct lock_class_key reservation_seqcount_class;
EXPORT_SYMBOL(reservation_seqcount_class);
const char reservation_seqcount_string[] = "reservation_seqcount";
EXPORT_SYMBOL(reservation_seqcount_string);
/**
* dma_resv_list_alloc - allocate fence list
* @shared_max: number of fences we need space for
*
* Allocate a new dma_resv_list and make sure to correctly initialize
* shared_max.
*/
static struct dma_resv_list *dma_resv_list_alloc(unsigned int shared_max)
{
struct dma_resv_list *list;
list = kmalloc(offsetof(typeof(*list), shared[shared_max]), GFP_KERNEL);
if (!list)
return NULL;
list->shared_max = (ksize(list) - offsetof(typeof(*list), shared)) /
sizeof(*list->shared);
return list;
}
/**
* dma_resv_list_free - free fence list
* @list: list to free
*
* Free a dma_resv_list and make sure to drop all references.
*/
static void dma_resv_list_free(struct dma_resv_list *list)
{
unsigned int i;
if (!list)
return;
for (i = 0; i < list->shared_count; ++i)
dma_fence_put(rcu_dereference_protected(list->shared[i], true));
kfree_rcu(list, rcu);
}
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
#if IS_ENABLED(CONFIG_LOCKDEP)
static int __init dma_resv_lockdep(void)
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
{
struct mm_struct *mm = mm_alloc();
dma-resv: Also prime acquire ctx for lockdep Semnatically it really doesn't matter where we grab the ticket. But since the ticket is a fake lockdep lock, it matters for lockdep validation purposes. This means stuff like grabbing a ticket and then doing copy_from/to_user isn't allowed anymore. This is a changed compared to the current ttm fault handler, which doesn't bother with having a full reservation. Since I'm looking into fixing the TODO entry in ttm_mem_evict_wait_busy() I think that'll have to change sooner or later anyway, better get started. A bit more context on why I'm looking into this: For backwards compat with existing i915 gem code I think we'll have to do full slowpath locking in the i915 equivalent of the eviction code. And with dynamic dma-buf that will leak across drivers, so another thing we need to standardize and make sure it's done the same way everyway. Unfortunately this means another full audit of all drivers: - gem helpers: acquire_init is done right before taking locks, so no problem. Same for acquire_fini and unlocking, which means nothing that's not already covered by the dma_resv_lock rules will be caught with this extension here to the acquire_ctx. - etnaviv: An absolute massive amount of code is run between the acquire_init and the first lock acquisition in submit_lock_objects. But nothing that would touch user memory and could cause a fault. Furthermore nothing that uses the ticket, so even if I missed something, it would be easy to fix by pushing the acquire_init right before the first use. Similar on the unlock/acquire_fini side. - i915: Right now (and this will likely change a lot rsn) the acquire ctx and actual locks are right next to each another. No problem. - msm has a problem: submit_create calls acquire_init, but then submit_lookup_objects() has a bunch of copy_from_user to do the object lookups. That's the only thing before submit_lock_objects call dma_resv_lock(). Despite all the copypasta to etnaviv, etnaviv does not have this issue since it copies all the userspace structs earlier. submit_cleanup does not have any such issues. With the prep patch to pull out the acquire_ctx and reorder it msm is going to be safe too. - nouveau: acquire_init is right next to ttm_bo_reserve, so all good. Similar on the acquire_fini/ttm_bo_unreserve side. - ttm execbuf utils: acquire context and locking are even in the same functions here (one function to reserve everything, the other to unreserve), so all good. - vc4: Another case where acquire context and locking are handled in the same functions (one function to lock everything, the other to unlock). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Huang Rui <ray.huang@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-3-daniel.vetter@ffwll.ch
2019-11-19 21:08:43 +00:00
struct ww_acquire_ctx ctx;
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
struct dma_resv obj;
dma-resv: Also prime acquire ctx for lockdep Semnatically it really doesn't matter where we grab the ticket. But since the ticket is a fake lockdep lock, it matters for lockdep validation purposes. This means stuff like grabbing a ticket and then doing copy_from/to_user isn't allowed anymore. This is a changed compared to the current ttm fault handler, which doesn't bother with having a full reservation. Since I'm looking into fixing the TODO entry in ttm_mem_evict_wait_busy() I think that'll have to change sooner or later anyway, better get started. A bit more context on why I'm looking into this: For backwards compat with existing i915 gem code I think we'll have to do full slowpath locking in the i915 equivalent of the eviction code. And with dynamic dma-buf that will leak across drivers, so another thing we need to standardize and make sure it's done the same way everyway. Unfortunately this means another full audit of all drivers: - gem helpers: acquire_init is done right before taking locks, so no problem. Same for acquire_fini and unlocking, which means nothing that's not already covered by the dma_resv_lock rules will be caught with this extension here to the acquire_ctx. - etnaviv: An absolute massive amount of code is run between the acquire_init and the first lock acquisition in submit_lock_objects. But nothing that would touch user memory and could cause a fault. Furthermore nothing that uses the ticket, so even if I missed something, it would be easy to fix by pushing the acquire_init right before the first use. Similar on the unlock/acquire_fini side. - i915: Right now (and this will likely change a lot rsn) the acquire ctx and actual locks are right next to each another. No problem. - msm has a problem: submit_create calls acquire_init, but then submit_lookup_objects() has a bunch of copy_from_user to do the object lookups. That's the only thing before submit_lock_objects call dma_resv_lock(). Despite all the copypasta to etnaviv, etnaviv does not have this issue since it copies all the userspace structs earlier. submit_cleanup does not have any such issues. With the prep patch to pull out the acquire_ctx and reorder it msm is going to be safe too. - nouveau: acquire_init is right next to ttm_bo_reserve, so all good. Similar on the acquire_fini/ttm_bo_unreserve side. - ttm execbuf utils: acquire context and locking are even in the same functions here (one function to reserve everything, the other to unreserve), so all good. - vc4: Another case where acquire context and locking are handled in the same functions (one function to lock everything, the other to unlock). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Huang Rui <ray.huang@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-3-daniel.vetter@ffwll.ch
2019-11-19 21:08:43 +00:00
int ret;
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
if (!mm)
return -ENOMEM;
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
dma_resv_init(&obj);
mmap_read_lock(mm);
dma-resv: Also prime acquire ctx for lockdep Semnatically it really doesn't matter where we grab the ticket. But since the ticket is a fake lockdep lock, it matters for lockdep validation purposes. This means stuff like grabbing a ticket and then doing copy_from/to_user isn't allowed anymore. This is a changed compared to the current ttm fault handler, which doesn't bother with having a full reservation. Since I'm looking into fixing the TODO entry in ttm_mem_evict_wait_busy() I think that'll have to change sooner or later anyway, better get started. A bit more context on why I'm looking into this: For backwards compat with existing i915 gem code I think we'll have to do full slowpath locking in the i915 equivalent of the eviction code. And with dynamic dma-buf that will leak across drivers, so another thing we need to standardize and make sure it's done the same way everyway. Unfortunately this means another full audit of all drivers: - gem helpers: acquire_init is done right before taking locks, so no problem. Same for acquire_fini and unlocking, which means nothing that's not already covered by the dma_resv_lock rules will be caught with this extension here to the acquire_ctx. - etnaviv: An absolute massive amount of code is run between the acquire_init and the first lock acquisition in submit_lock_objects. But nothing that would touch user memory and could cause a fault. Furthermore nothing that uses the ticket, so even if I missed something, it would be easy to fix by pushing the acquire_init right before the first use. Similar on the unlock/acquire_fini side. - i915: Right now (and this will likely change a lot rsn) the acquire ctx and actual locks are right next to each another. No problem. - msm has a problem: submit_create calls acquire_init, but then submit_lookup_objects() has a bunch of copy_from_user to do the object lookups. That's the only thing before submit_lock_objects call dma_resv_lock(). Despite all the copypasta to etnaviv, etnaviv does not have this issue since it copies all the userspace structs earlier. submit_cleanup does not have any such issues. With the prep patch to pull out the acquire_ctx and reorder it msm is going to be safe too. - nouveau: acquire_init is right next to ttm_bo_reserve, so all good. Similar on the acquire_fini/ttm_bo_unreserve side. - ttm execbuf utils: acquire context and locking are even in the same functions here (one function to reserve everything, the other to unreserve), so all good. - vc4: Another case where acquire context and locking are handled in the same functions (one function to lock everything, the other to unlock). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Huang Rui <ray.huang@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-3-daniel.vetter@ffwll.ch
2019-11-19 21:08:43 +00:00
ww_acquire_init(&ctx, &reservation_ww_class);
ret = dma_resv_lock(&obj, &ctx);
if (ret == -EDEADLK)
dma_resv_lock_slow(&obj, &ctx);
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
fs_reclaim_acquire(GFP_KERNEL);
fs_reclaim_release(GFP_KERNEL);
ww_mutex_unlock(&obj.lock);
dma-resv: Also prime acquire ctx for lockdep Semnatically it really doesn't matter where we grab the ticket. But since the ticket is a fake lockdep lock, it matters for lockdep validation purposes. This means stuff like grabbing a ticket and then doing copy_from/to_user isn't allowed anymore. This is a changed compared to the current ttm fault handler, which doesn't bother with having a full reservation. Since I'm looking into fixing the TODO entry in ttm_mem_evict_wait_busy() I think that'll have to change sooner or later anyway, better get started. A bit more context on why I'm looking into this: For backwards compat with existing i915 gem code I think we'll have to do full slowpath locking in the i915 equivalent of the eviction code. And with dynamic dma-buf that will leak across drivers, so another thing we need to standardize and make sure it's done the same way everyway. Unfortunately this means another full audit of all drivers: - gem helpers: acquire_init is done right before taking locks, so no problem. Same for acquire_fini and unlocking, which means nothing that's not already covered by the dma_resv_lock rules will be caught with this extension here to the acquire_ctx. - etnaviv: An absolute massive amount of code is run between the acquire_init and the first lock acquisition in submit_lock_objects. But nothing that would touch user memory and could cause a fault. Furthermore nothing that uses the ticket, so even if I missed something, it would be easy to fix by pushing the acquire_init right before the first use. Similar on the unlock/acquire_fini side. - i915: Right now (and this will likely change a lot rsn) the acquire ctx and actual locks are right next to each another. No problem. - msm has a problem: submit_create calls acquire_init, but then submit_lookup_objects() has a bunch of copy_from_user to do the object lookups. That's the only thing before submit_lock_objects call dma_resv_lock(). Despite all the copypasta to etnaviv, etnaviv does not have this issue since it copies all the userspace structs earlier. submit_cleanup does not have any such issues. With the prep patch to pull out the acquire_ctx and reorder it msm is going to be safe too. - nouveau: acquire_init is right next to ttm_bo_reserve, so all good. Similar on the acquire_fini/ttm_bo_unreserve side. - ttm execbuf utils: acquire context and locking are even in the same functions here (one function to reserve everything, the other to unreserve), so all good. - vc4: Another case where acquire context and locking are handled in the same functions (one function to lock everything, the other to unlock). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Huang Rui <ray.huang@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rob Herring <robh@kernel.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-3-daniel.vetter@ffwll.ch
2019-11-19 21:08:43 +00:00
ww_acquire_fini(&ctx);
mmap_read_unlock(mm);
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
mmput(mm);
return 0;
dma_resv: prime lockdep annotations Full audit of everyone: - i915, radeon, amdgpu should be clean per their maintainers. - vram helpers should be fine, they don't do command submission, so really no business holding struct_mutex while doing copy_*_user. But I haven't checked them all. - panfrost seems to dma_resv_lock only in panfrost_job_push, which looks clean. - v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(), copying from/to userspace happens all in v3d_lookup_bos which is outside of the critical section. - vmwgfx has a bunch of ioctls that do their own copy_*_user: - vmw_execbuf_process: First this does some copies in vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself. Then comes the usual ttm reserve/validate sequence, then actual submission/fencing, then unreserving, and finally some more copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of details, but looks all safe. - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be seen, seems to only create a fence and copy it out. - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be found there. Summary: vmwgfx seems to be fine too. - virtio: There's virtio_gpu_execbuffer_ioctl, which does all the copying from userspace before even looking up objects through their handles, so safe. Plus the getparam/getcaps ioctl, also both safe. - qxl only has qxl_execbuffer_ioctl, which calls into qxl_process_single_command. There's a lovely comment before the __copy_from_user_inatomic that the slowpath should be copied from i915, but I guess that never happened. Try not to be unlucky and get your CS data evicted between when it's written and the kernel tries to read it. The only other copy_from_user is for relocs, but those are done before qxl_release_reserve_list(), which seems to be the only thing reserving buffers (in the ttm/dma_resv sense) in that code. So looks safe. - A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this everywhere and needs to be fixed up. v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a dma_resv lock of a different object already. Christian mentioned that ttm core does this too for ghost objects. intel-gfx-ci highlighted that i915 has similar issues. Unfortunately we can't do this in the usual module init functions, because kernel threads don't have an ->mm - we have to wait around for some user thread to do this. Solution is to spawn a worker (but only once). It's horrible, but it works. v3: We can allocate mm! (Chris). Horrible worker hack out, clean initcall solution in. v4: Annotate with __init (Rob Herring) Cc: Rob Herring <robh@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
2019-11-04 17:37:59 +00:00
}
subsys_initcall(dma_resv_lockdep);
#endif
/**
* dma_resv_init - initialize a reservation object
* @obj: the reservation object
*/
void dma_resv_init(struct dma_resv *obj)
{
ww_mutex_init(&obj->lock, &reservation_ww_class);
__seqcount_init(&obj->seq, reservation_seqcount_string,
&reservation_seqcount_class);
RCU_INIT_POINTER(obj->fence, NULL);
RCU_INIT_POINTER(obj->fence_excl, NULL);
}
EXPORT_SYMBOL(dma_resv_init);
/**
* dma_resv_fini - destroys a reservation object
* @obj: the reservation object
*/
void dma_resv_fini(struct dma_resv *obj)
{
struct dma_resv_list *fobj;
struct dma_fence *excl;
/*
* This object should be dead and all references must have
* been released to it, so no need to be protected with rcu.
*/
excl = rcu_dereference_protected(obj->fence_excl, 1);
if (excl)
dma_fence_put(excl);
fobj = rcu_dereference_protected(obj->fence, 1);
dma_resv_list_free(fobj);
ww_mutex_destroy(&obj->lock);
}
EXPORT_SYMBOL(dma_resv_fini);
/**
* dma_resv_reserve_shared - Reserve space to add shared fences to
* a dma_resv.
* @obj: reservation object
* @num_fences: number of fences we want to add
*
* Should be called before dma_resv_add_shared_fence(). Must
* be called with obj->lock held.
*
* RETURNS
* Zero for success, or -errno
*/
int dma_resv_reserve_shared(struct dma_resv *obj, unsigned int num_fences)
{
struct dma_resv_list *old, *new;
unsigned int i, j, k, max;
dma_resv_assert_held(obj);
old = dma_resv_get_list(obj);
if (old && old->shared_max) {
if ((old->shared_count + num_fences) <= old->shared_max)
return 0;
else
max = max(old->shared_count + num_fences,
old->shared_max * 2);
} else {
max = 4;
}
new = dma_resv_list_alloc(max);
if (!new)
return -ENOMEM;
/*
* no need to bump fence refcounts, rcu_read access
* requires the use of kref_get_unless_zero, and the
* references from the old struct are carried over to
* the new.
*/
for (i = 0, j = 0, k = max; i < (old ? old->shared_count : 0); ++i) {
struct dma_fence *fence;
fence = rcu_dereference_protected(old->shared[i],
dma_resv_held(obj));
if (dma_fence_is_signaled(fence))
RCU_INIT_POINTER(new->shared[--k], fence);
else
RCU_INIT_POINTER(new->shared[j++], fence);
}
new->shared_count = j;
/*
* We are not changing the effective set of fences here so can
* merely update the pointer to the new array; both existing
* readers and new readers will see exactly the same set of
* active (unsignaled) shared fences. Individual fences and the
* old array are protected by RCU and so will not vanish under
* the gaze of the rcu_read_lock() readers.
*/
rcu_assign_pointer(obj->fence, new);
if (!old)
return 0;
/* Drop the references to the signaled fences */
for (i = k; i < max; ++i) {
struct dma_fence *fence;
fence = rcu_dereference_protected(new->shared[i],
dma_resv_held(obj));
dma_fence_put(fence);
}
kfree_rcu(old, rcu);
return 0;
}
EXPORT_SYMBOL(dma_resv_reserve_shared);
/**
* dma_resv_add_shared_fence - Add a fence to a shared slot
* @obj: the reservation object
* @fence: the shared fence to add
*
* Add a fence to a shared slot, obj->lock must be held, and
* dma_resv_reserve_shared() has been called.
*/
void dma_resv_add_shared_fence(struct dma_resv *obj, struct dma_fence *fence)
{
struct dma_resv_list *fobj;
struct dma_fence *old;
dma-buf: Update reservation shared_count after adding the new fence We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b641c1b ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
2018-10-26 08:03:02 +00:00
unsigned int i, count;
dma_fence_get(fence);
dma_resv_assert_held(obj);
fobj = dma_resv_get_list(obj);
dma-buf: Update reservation shared_count after adding the new fence We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b641c1b ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
2018-10-26 08:03:02 +00:00
count = fobj->shared_count;
preempt_disable();
write_seqcount_begin(&obj->seq);
dma-buf: Update reservation shared_count after adding the new fence We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b641c1b ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
2018-10-26 08:03:02 +00:00
for (i = 0; i < count; ++i) {
old = rcu_dereference_protected(fobj->shared[i],
dma_resv_held(obj));
if (old->context == fence->context ||
dma_fence_is_signaled(old))
goto replace;
}
BUG_ON(fobj->shared_count >= fobj->shared_max);
old = NULL;
dma-buf: Update reservation shared_count after adding the new fence We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b641c1b ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
2018-10-26 08:03:02 +00:00
count++;
replace:
RCU_INIT_POINTER(fobj->shared[i], fence);
dma-buf: Update reservation shared_count after adding the new fence We need to serialise the addition of a new fence into the shared list such that the fence is visible before we claim it is there. Otherwise a concurrent reader of the shared fence list will see an uninitialised fence slot before it is set. <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G U 4.19.0-rc8-CI-CI_DRM_5035+ #1 <4> [109.613189] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915] <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00 0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00 <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246 <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001 <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0 <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001 <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8 <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b <4> [109.613341] FS: 00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000 <4> [109.613352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0 Fixes: 27836b641c1b ("dma-buf: remove shared fence staging in reservation object") Testcase: igt/gem_busy/close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk
2018-10-26 08:03:02 +00:00
/* pointer update must be visible before we extend the shared_count */
smp_store_mb(fobj->shared_count, count);
write_seqcount_end(&obj->seq);
preempt_enable();
dma_fence_put(old);
}
EXPORT_SYMBOL(dma_resv_add_shared_fence);
/**
* dma_resv_add_excl_fence - Add an exclusive fence.
* @obj: the reservation object
* @fence: the shared fence to add
*
* Add a fence to the exclusive slot. The obj->lock must be held.
*/
void dma_resv_add_excl_fence(struct dma_resv *obj, struct dma_fence *fence)
{
struct dma_fence *old_fence = dma_resv_get_excl(obj);
struct dma_resv_list *old;
u32 i = 0;
dma_resv_assert_held(obj);
old = dma_resv_get_list(obj);
if (old)
i = old->shared_count;
if (fence)
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
dma_fence_get(fence);
preempt_disable();
write_seqcount_begin(&obj->seq);
/* write_seqcount_begin provides the necessary memory barrier */
RCU_INIT_POINTER(obj->fence_excl, fence);
if (old)
old->shared_count = 0;
write_seqcount_end(&obj->seq);
preempt_enable();
/* inplace update, no shared fences */
while (i--)
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
dma_fence_put(rcu_dereference_protected(old->shared[i],
dma_resv_held(obj)));
dma_fence_put(old_fence);
}
EXPORT_SYMBOL(dma_resv_add_excl_fence);
/**
* dma_resv_copy_fences - Copy all fences from src to dst.
* @dst: the destination reservation object
* @src: the source reservation object
*
* Copy all fences from src to dst. dst-lock must be held.
*/
int dma_resv_copy_fences(struct dma_resv *dst, struct dma_resv *src)
{
struct dma_resv_list *src_list, *dst_list;
struct dma_fence *old, *new;
unsigned i;
dma_resv_assert_held(dst);
rcu_read_lock();
src_list = rcu_dereference(src->fence);
retry:
if (src_list) {
unsigned shared_count = src_list->shared_count;
rcu_read_unlock();
dst_list = dma_resv_list_alloc(shared_count);
if (!dst_list)
return -ENOMEM;
rcu_read_lock();
src_list = rcu_dereference(src->fence);
if (!src_list || src_list->shared_count > shared_count) {
kfree(dst_list);
goto retry;
}
dst_list->shared_count = 0;
for (i = 0; i < src_list->shared_count; ++i) {
struct dma_fence *fence;
fence = rcu_dereference(src_list->shared[i]);
if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT,
&fence->flags))
continue;
if (!dma_fence_get_rcu(fence)) {
dma_resv_list_free(dst_list);
src_list = rcu_dereference(src->fence);
goto retry;
}
if (dma_fence_is_signaled(fence)) {
dma_fence_put(fence);
continue;
}
rcu_assign_pointer(dst_list->shared[dst_list->shared_count++], fence);
}
} else {
dst_list = NULL;
}
new = dma_fence_get_rcu_safe(&src->fence_excl);
rcu_read_unlock();
src_list = dma_resv_get_list(dst);
old = dma_resv_get_excl(dst);
preempt_disable();
write_seqcount_begin(&dst->seq);
/* write_seqcount_begin provides the necessary memory barrier */
RCU_INIT_POINTER(dst->fence_excl, new);
RCU_INIT_POINTER(dst->fence, dst_list);
write_seqcount_end(&dst->seq);
preempt_enable();
dma_resv_list_free(src_list);
dma_fence_put(old);
return 0;
}
EXPORT_SYMBOL(dma_resv_copy_fences);
/**
* dma_resv_get_fences_rcu - Get an object's shared and exclusive
* fences without update side lock held
* @obj: the reservation object
* @pfence_excl: the returned exclusive fence (or NULL)
* @pshared_count: the number of shared fences returned
* @pshared: the array of shared fence ptrs returned (array is krealloc'd to
* the required size, and must be freed by caller)
*
* Retrieve all fences from the reservation object. If the pointer for the
* exclusive fence is not specified the fence is put into the array of the
* shared fences as well. Returns either zero or -ENOMEM.
*/
int dma_resv_get_fences_rcu(struct dma_resv *obj,
struct dma_fence **pfence_excl,
unsigned *pshared_count,
struct dma_fence ***pshared)
{
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
struct dma_fence **shared = NULL;
struct dma_fence *fence_excl;
unsigned int shared_count;
int ret = 1;
do {
struct dma_resv_list *fobj;
unsigned int i, seq;
size_t sz = 0;
shared_count = i = 0;
rcu_read_lock();
seq = read_seqcount_begin(&obj->seq);
fence_excl = rcu_dereference(obj->fence_excl);
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
if (fence_excl && !dma_fence_get_rcu(fence_excl))
goto unlock;
fobj = rcu_dereference(obj->fence);
if (fobj)
sz += sizeof(*shared) * fobj->shared_max;
if (!pfence_excl && fence_excl)
sz += sizeof(*shared);
if (sz) {
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
struct dma_fence **nshared;
nshared = krealloc(shared, sz,
GFP_NOWAIT | __GFP_NOWARN);
if (!nshared) {
rcu_read_unlock();
dma_fence_put(fence_excl);
fence_excl = NULL;
nshared = krealloc(shared, sz, GFP_KERNEL);
if (nshared) {
shared = nshared;
continue;
}
ret = -ENOMEM;
break;
}
shared = nshared;
shared_count = fobj ? fobj->shared_count : 0;
for (i = 0; i < shared_count; ++i) {
shared[i] = rcu_dereference(fobj->shared[i]);
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
if (!dma_fence_get_rcu(shared[i]))
break;
}
}
if (i != shared_count || read_seqcount_retry(&obj->seq, seq)) {
while (i--)
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
dma_fence_put(shared[i]);
dma_fence_put(fence_excl);
goto unlock;
}
ret = 0;
unlock:
rcu_read_unlock();
} while (ret);
if (pfence_excl)
*pfence_excl = fence_excl;
else if (fence_excl)
shared[shared_count++] = fence_excl;
if (!shared_count) {
kfree(shared);
shared = NULL;
}
*pshared_count = shared_count;
*pshared = shared;
return ret;
}
EXPORT_SYMBOL_GPL(dma_resv_get_fences_rcu);
/**
* dma_resv_wait_timeout_rcu - Wait on reservation's objects
* shared and/or exclusive fences.
* @obj: the reservation object
* @wait_all: if true, wait on all fences, else wait on just exclusive fence
* @intr: if true, do interruptible wait
* @timeout: timeout value in jiffies or zero to return immediately
*
* RETURNS
* Returns -ERESTARTSYS if interrupted, 0 if the wait timed out, or
* greater than zer on success.
*/
long dma_resv_wait_timeout_rcu(struct dma_resv *obj,
bool wait_all, bool intr,
unsigned long timeout)
{
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
struct dma_fence *fence;
unsigned seq, shared_count;
long ret = timeout ? timeout : 1;
int i;
retry:
shared_count = 0;
seq = read_seqcount_begin(&obj->seq);
rcu_read_lock();
i = -1;
fence = rcu_dereference(obj->fence_excl);
if (fence && !test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) {
if (!dma_fence_get_rcu(fence))
goto unlock_retry;
if (dma_fence_is_signaled(fence)) {
dma_fence_put(fence);
fence = NULL;
}
} else {
fence = NULL;
}
if (wait_all) {
struct dma_resv_list *fobj = rcu_dereference(obj->fence);
if (fobj)
shared_count = fobj->shared_count;
for (i = 0; !fence && i < shared_count; ++i) {
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
struct dma_fence *lfence = rcu_dereference(fobj->shared[i]);
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT,
&lfence->flags))
continue;
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
if (!dma_fence_get_rcu(lfence))
goto unlock_retry;
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
if (dma_fence_is_signaled(lfence)) {
dma_fence_put(lfence);
continue;
}
fence = lfence;
break;
}
}
rcu_read_unlock();
if (fence) {
if (read_seqcount_retry(&obj->seq, seq)) {
dma_fence_put(fence);
goto retry;
}
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
ret = dma_fence_wait_timeout(fence, intr, ret);
dma_fence_put(fence);
if (ret > 0 && wait_all && (i + 1 < shared_count))
goto retry;
}
return ret;
unlock_retry:
rcu_read_unlock();
goto retry;
}
EXPORT_SYMBOL_GPL(dma_resv_wait_timeout_rcu);
static inline int dma_resv_test_signaled_single(struct dma_fence *passed_fence)
{
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
struct dma_fence *fence, *lfence = passed_fence;
int ret = 1;
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
if (!test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &lfence->flags)) {
fence = dma_fence_get_rcu(lfence);
if (!fence)
return -1;
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
ret = !!dma_fence_is_signaled(fence);
dma_fence_put(fence);
}
return ret;
}
/**
* dma_resv_test_signaled_rcu - Test if a reservation object's
* fences have been signaled.
* @obj: the reservation object
* @test_all: if true, test all fences, otherwise only test the exclusive
* fence
*
* RETURNS
* true if all fences signaled, else false
*/
bool dma_resv_test_signaled_rcu(struct dma_resv *obj, bool test_all)
{
unsigned seq, shared_count;
int ret;
rcu_read_lock();
retry:
ret = true;
shared_count = 0;
seq = read_seqcount_begin(&obj->seq);
if (test_all) {
unsigned i;
struct dma_resv_list *fobj = rcu_dereference(obj->fence);
if (fobj)
shared_count = fobj->shared_count;
for (i = 0; i < shared_count; ++i) {
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 12:00:45 +00:00
struct dma_fence *fence = rcu_dereference(fobj->shared[i]);
ret = dma_resv_test_signaled_single(fence);
if (ret < 0)
goto retry;
else if (!ret)
break;
}
if (read_seqcount_retry(&obj->seq, seq))
goto retry;
}
if (!shared_count) {
struct dma_fence *fence_excl = rcu_dereference(obj->fence_excl);
if (fence_excl) {
ret = dma_resv_test_signaled_single(fence_excl);
if (ret < 0)
goto retry;
if (read_seqcount_retry(&obj->seq, seq))
goto retry;
}
}
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(dma_resv_test_signaled_rcu);