linux/arch/mips/kernel/mips-r2-to-r6-emul.c

2364 lines
54 KiB
C
Raw Permalink Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2014 Imagination Technologies Ltd.
* Author: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
* Author: Markos Chandras <markos.chandras@imgtec.com>
*
* MIPS R2 user space instruction emulator for MIPS R6
*
*/
#include <linux/bug.h>
#include <linux/compiler.h>
#include <linux/debugfs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/seq_file.h>
#include <asm/asm.h>
#include <asm/branch.h>
#include <asm/break.h>
#include <asm/debug.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/inst.h>
#include <asm/mips-r2-to-r6-emul.h>
#include <asm/local.h>
#include <asm/mipsregs.h>
#include <asm/ptrace.h>
#include <linux/uaccess.h>
#ifdef CONFIG_64BIT
#define ADDIU "daddiu "
#define INS "dins "
#define EXT "dext "
#else
#define ADDIU "addiu "
#define INS "ins "
#define EXT "ext "
#endif /* CONFIG_64BIT */
#define SB "sb "
#define LB "lb "
#define LL "ll "
#define SC "sc "
#ifdef CONFIG_DEBUG_FS
static DEFINE_PER_CPU(struct mips_r2_emulator_stats, mipsr2emustats);
static DEFINE_PER_CPU(struct mips_r2_emulator_stats, mipsr2bdemustats);
static DEFINE_PER_CPU(struct mips_r2br_emulator_stats, mipsr2bremustats);
#endif
extern const unsigned int fpucondbit[8];
#define MIPS_R2_EMUL_TOTAL_PASS 10
int mipsr2_emulation = 0;
static int __init mipsr2emu_enable(char *s)
{
mipsr2_emulation = 1;
pr_info("MIPS R2-to-R6 Emulator Enabled!");
return 1;
}
__setup("mipsr2emu", mipsr2emu_enable);
/**
* mipsr6_emul - Emulate some frequent R2/R5/R6 instructions in delay slot
* for performance instead of the traditional way of using a stack trampoline
* which is rather slow.
* @regs: Process register set
* @ir: Instruction
*/
static inline int mipsr6_emul(struct pt_regs *regs, u32 ir)
{
switch (MIPSInst_OPCODE(ir)) {
case addiu_op:
if (MIPSInst_RT(ir))
regs->regs[MIPSInst_RT(ir)] =
(s32)regs->regs[MIPSInst_RS(ir)] +
(s32)MIPSInst_SIMM(ir);
return 0;
case daddiu_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
break;
if (MIPSInst_RT(ir))
regs->regs[MIPSInst_RT(ir)] =
(s64)regs->regs[MIPSInst_RS(ir)] +
(s64)MIPSInst_SIMM(ir);
return 0;
case lwc1_op:
case swc1_op:
case cop1_op:
case cop1x_op:
/* FPU instructions in delay slot */
return -SIGFPE;
case spec_op:
switch (MIPSInst_FUNC(ir)) {
case or_op:
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
regs->regs[MIPSInst_RS(ir)] |
regs->regs[MIPSInst_RT(ir)];
return 0;
case sll_op:
if (MIPSInst_RS(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s32)(((u32)regs->regs[MIPSInst_RT(ir)]) <<
MIPSInst_FD(ir));
return 0;
case srl_op:
if (MIPSInst_RS(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s32)(((u32)regs->regs[MIPSInst_RT(ir)]) >>
MIPSInst_FD(ir));
return 0;
case addu_op:
if (MIPSInst_FD(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s32)((u32)regs->regs[MIPSInst_RS(ir)] +
(u32)regs->regs[MIPSInst_RT(ir)]);
return 0;
case subu_op:
if (MIPSInst_FD(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s32)((u32)regs->regs[MIPSInst_RS(ir)] -
(u32)regs->regs[MIPSInst_RT(ir)]);
return 0;
case dsll_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_RS(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s64)(((u64)regs->regs[MIPSInst_RT(ir)]) <<
MIPSInst_FD(ir));
return 0;
case dsrl_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_RS(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s64)(((u64)regs->regs[MIPSInst_RT(ir)]) >>
MIPSInst_FD(ir));
return 0;
case daddu_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_FD(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(u64)regs->regs[MIPSInst_RS(ir)] +
(u64)regs->regs[MIPSInst_RT(ir)];
return 0;
case dsubu_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_FD(ir))
break;
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] =
(s64)((u64)regs->regs[MIPSInst_RS(ir)] -
(u64)regs->regs[MIPSInst_RT(ir)]);
return 0;
}
break;
default:
pr_debug("No fastpath BD emulation for instruction 0x%08x (op: %02x)\n",
ir, MIPSInst_OPCODE(ir));
}
return SIGILL;
}
/**
* movf_func - Emulate a MOVF instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int movf_func(struct pt_regs *regs, u32 ir)
{
u32 csr;
u32 cond;
csr = current->thread.fpu.fcr31;
cond = fpucondbit[MIPSInst_RT(ir) >> 2];
if (((csr & cond) == 0) && MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
MIPS_R2_STATS(movs);
return 0;
}
/**
* movt_func - Emulate a MOVT instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int movt_func(struct pt_regs *regs, u32 ir)
{
u32 csr;
u32 cond;
csr = current->thread.fpu.fcr31;
cond = fpucondbit[MIPSInst_RT(ir) >> 2];
if (((csr & cond) != 0) && MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
MIPS_R2_STATS(movs);
return 0;
}
/**
* jr_func - Emulate a JR instruction.
* @pt_regs: Process register set
* @ir: Instruction
*
* Returns SIGILL if JR was in delay slot, SIGEMT if we
* can't compute the EPC, SIGSEGV if we can't access the
* userland instruction or 0 on success.
*/
static int jr_func(struct pt_regs *regs, u32 ir)
{
int err;
unsigned long cepc, epc, nepc;
u32 nir;
if (delay_slot(regs))
return SIGILL;
/* EPC after the RI/JR instruction */
nepc = regs->cp0_epc;
/* Roll back to the reserved R2 JR instruction */
regs->cp0_epc -= 4;
epc = regs->cp0_epc;
err = __compute_return_epc(regs);
if (err < 0)
return SIGEMT;
/* Computed EPC */
cepc = regs->cp0_epc;
/* Get DS instruction */
err = __get_user(nir, (u32 __user *)nepc);
if (err)
return SIGSEGV;
MIPS_R2BR_STATS(jrs);
/* If nir == 0(NOP), then nothing else to do */
if (nir) {
/*
* Negative err means FPU instruction in BD-slot,
* Zero err means 'BD-slot emulation done'
* For anything else we go back to trampoline emulation.
*/
err = mipsr6_emul(regs, nir);
if (err > 0) {
regs->cp0_epc = nepc;
MIPS: Use per-mm page to execute branch delay slot instructions In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-08 10:06:19 +00:00
err = mips_dsemul(regs, nir, epc, cepc);
if (err == SIGILL)
err = SIGEMT;
MIPS_R2_STATS(dsemul);
}
}
return err;
}
/**
* movz_func - Emulate a MOVZ instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int movz_func(struct pt_regs *regs, u32 ir)
{
if (((regs->regs[MIPSInst_RT(ir)]) == 0) && MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
MIPS_R2_STATS(movs);
return 0;
}
/**
* movn_func - Emulate a MOVZ instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int movn_func(struct pt_regs *regs, u32 ir)
{
if (((regs->regs[MIPSInst_RT(ir)]) != 0) && MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)];
MIPS_R2_STATS(movs);
return 0;
}
/**
* mfhi_func - Emulate a MFHI instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int mfhi_func(struct pt_regs *regs, u32 ir)
{
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] = regs->hi;
MIPS_R2_STATS(hilo);
return 0;
}
/**
* mthi_func - Emulate a MTHI instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int mthi_func(struct pt_regs *regs, u32 ir)
{
regs->hi = regs->regs[MIPSInst_RS(ir)];
MIPS_R2_STATS(hilo);
return 0;
}
/**
* mflo_func - Emulate a MFLO instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int mflo_func(struct pt_regs *regs, u32 ir)
{
if (MIPSInst_RD(ir))
regs->regs[MIPSInst_RD(ir)] = regs->lo;
MIPS_R2_STATS(hilo);
return 0;
}
/**
* mtlo_func - Emulate a MTLO instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int mtlo_func(struct pt_regs *regs, u32 ir)
{
regs->lo = regs->regs[MIPSInst_RS(ir)];
MIPS_R2_STATS(hilo);
return 0;
}
/**
* mult_func - Emulate a MULT instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int mult_func(struct pt_regs *regs, u32 ir)
{
s64 res;
s32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (s64)rt * (s64)rs;
rs = res;
regs->lo = (s64)rs;
rt = res >> 32;
res = (s64)rt;
regs->hi = res;
MIPS_R2_STATS(muls);
return 0;
}
/**
* multu_func - Emulate a MULTU instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int multu_func(struct pt_regs *regs, u32 ir)
{
u64 res;
u32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (u64)rt * (u64)rs;
rt = res;
regs->lo = (s64)(s32)rt;
regs->hi = (s64)(s32)(res >> 32);
MIPS_R2_STATS(muls);
return 0;
}
/**
* div_func - Emulate a DIV instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int div_func(struct pt_regs *regs, u32 ir)
{
s32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
regs->lo = (s64)(rs / rt);
regs->hi = (s64)(rs % rt);
MIPS_R2_STATS(divs);
return 0;
}
/**
* divu_func - Emulate a DIVU instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int divu_func(struct pt_regs *regs, u32 ir)
{
u32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
regs->lo = (s64)(rs / rt);
regs->hi = (s64)(rs % rt);
MIPS_R2_STATS(divs);
return 0;
}
/**
* dmult_func - Emulate a DMULT instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 on success or SIGILL for 32-bit kernels.
*/
static int dmult_func(struct pt_regs *regs, u32 ir)
{
s64 res;
s64 rt, rs;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
return SIGILL;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = rt * rs;
regs->lo = res;
__asm__ __volatile__(
"dmuh %0, %1, %2\t\n"
: "=r"(res)
: "r"(rt), "r"(rs));
regs->hi = res;
MIPS_R2_STATS(muls);
return 0;
}
/**
* dmultu_func - Emulate a DMULTU instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 on success or SIGILL for 32-bit kernels.
*/
static int dmultu_func(struct pt_regs *regs, u32 ir)
{
u64 res;
u64 rt, rs;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
return SIGILL;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = rt * rs;
regs->lo = res;
__asm__ __volatile__(
"dmuhu %0, %1, %2\t\n"
: "=r"(res)
: "r"(rt), "r"(rs));
regs->hi = res;
MIPS_R2_STATS(muls);
return 0;
}
/**
* ddiv_func - Emulate a DDIV instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 on success or SIGILL for 32-bit kernels.
*/
static int ddiv_func(struct pt_regs *regs, u32 ir)
{
s64 rt, rs;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
return SIGILL;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
regs->lo = rs / rt;
regs->hi = rs % rt;
MIPS_R2_STATS(divs);
return 0;
}
/**
* ddivu_func - Emulate a DDIVU instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 on success or SIGILL for 32-bit kernels.
*/
static int ddivu_func(struct pt_regs *regs, u32 ir)
{
u64 rt, rs;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
return SIGILL;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
regs->lo = rs / rt;
regs->hi = rs % rt;
MIPS_R2_STATS(divs);
return 0;
}
/* R6 removed instructions for the SPECIAL opcode */
static const struct r2_decoder_table spec_op_table[] = {
{ 0xfc1ff83f, 0x00000008, jr_func },
{ 0xfc00ffff, 0x00000018, mult_func },
{ 0xfc00ffff, 0x00000019, multu_func },
{ 0xfc00ffff, 0x0000001c, dmult_func },
{ 0xfc00ffff, 0x0000001d, dmultu_func },
{ 0xffff07ff, 0x00000010, mfhi_func },
{ 0xfc1fffff, 0x00000011, mthi_func },
{ 0xffff07ff, 0x00000012, mflo_func },
{ 0xfc1fffff, 0x00000013, mtlo_func },
{ 0xfc0307ff, 0x00000001, movf_func },
{ 0xfc0307ff, 0x00010001, movt_func },
{ 0xfc0007ff, 0x0000000a, movz_func },
{ 0xfc0007ff, 0x0000000b, movn_func },
{ 0xfc00ffff, 0x0000001a, div_func },
{ 0xfc00ffff, 0x0000001b, divu_func },
{ 0xfc00ffff, 0x0000001e, ddiv_func },
{ 0xfc00ffff, 0x0000001f, ddivu_func },
{}
};
/**
* madd_func - Emulate a MADD instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int madd_func(struct pt_regs *regs, u32 ir)
{
s64 res;
s32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (s64)rt * (s64)rs;
rt = regs->hi;
rs = regs->lo;
res += ((((s64)rt) << 32) | (u32)rs);
rt = res;
regs->lo = (s64)rt;
rs = res >> 32;
regs->hi = (s64)rs;
MIPS_R2_STATS(dsps);
return 0;
}
/**
* maddu_func - Emulate a MADDU instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int maddu_func(struct pt_regs *regs, u32 ir)
{
u64 res;
u32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (u64)rt * (u64)rs;
rt = regs->hi;
rs = regs->lo;
res += ((((s64)rt) << 32) | (u32)rs);
rt = res;
regs->lo = (s64)(s32)rt;
rs = res >> 32;
regs->hi = (s64)(s32)rs;
MIPS_R2_STATS(dsps);
return 0;
}
/**
* msub_func - Emulate a MSUB instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int msub_func(struct pt_regs *regs, u32 ir)
{
s64 res;
s32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (s64)rt * (s64)rs;
rt = regs->hi;
rs = regs->lo;
res = ((((s64)rt) << 32) | (u32)rs) - res;
rt = res;
regs->lo = (s64)rt;
rs = res >> 32;
regs->hi = (s64)rs;
MIPS_R2_STATS(dsps);
return 0;
}
/**
* msubu_func - Emulate a MSUBU instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int msubu_func(struct pt_regs *regs, u32 ir)
{
u64 res;
u32 rt, rs;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (u64)rt * (u64)rs;
rt = regs->hi;
rs = regs->lo;
res = ((((s64)rt) << 32) | (u32)rs) - res;
rt = res;
regs->lo = (s64)(s32)rt;
rs = res >> 32;
regs->hi = (s64)(s32)rs;
MIPS_R2_STATS(dsps);
return 0;
}
/**
* mul_func - Emulate a MUL instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int mul_func(struct pt_regs *regs, u32 ir)
{
s64 res;
s32 rt, rs;
if (!MIPSInst_RD(ir))
return 0;
rt = regs->regs[MIPSInst_RT(ir)];
rs = regs->regs[MIPSInst_RS(ir)];
res = (s64)rt * (s64)rs;
rs = res;
regs->regs[MIPSInst_RD(ir)] = (s64)rs;
MIPS_R2_STATS(muls);
return 0;
}
/**
* clz_func - Emulate a CLZ instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int clz_func(struct pt_regs *regs, u32 ir)
{
u32 res;
u32 rs;
if (!MIPSInst_RD(ir))
return 0;
rs = regs->regs[MIPSInst_RS(ir)];
__asm__ __volatile__("clz %0, %1" : "=r"(res) : "r"(rs));
regs->regs[MIPSInst_RD(ir)] = res;
MIPS_R2_STATS(bops);
return 0;
}
/**
* clo_func - Emulate a CLO instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int clo_func(struct pt_regs *regs, u32 ir)
{
u32 res;
u32 rs;
if (!MIPSInst_RD(ir))
return 0;
rs = regs->regs[MIPSInst_RS(ir)];
__asm__ __volatile__("clo %0, %1" : "=r"(res) : "r"(rs));
regs->regs[MIPSInst_RD(ir)] = res;
MIPS_R2_STATS(bops);
return 0;
}
/**
* dclz_func - Emulate a DCLZ instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int dclz_func(struct pt_regs *regs, u32 ir)
{
u64 res;
u64 rs;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
return SIGILL;
if (!MIPSInst_RD(ir))
return 0;
rs = regs->regs[MIPSInst_RS(ir)];
__asm__ __volatile__("dclz %0, %1" : "=r"(res) : "r"(rs));
regs->regs[MIPSInst_RD(ir)] = res;
MIPS_R2_STATS(bops);
return 0;
}
/**
* dclo_func - Emulate a DCLO instruction
* @regs: Process register set
* @ir: Instruction
*
* Returns 0 since it always succeeds.
*/
static int dclo_func(struct pt_regs *regs, u32 ir)
{
u64 res;
u64 rs;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT))
return SIGILL;
if (!MIPSInst_RD(ir))
return 0;
rs = regs->regs[MIPSInst_RS(ir)];
__asm__ __volatile__("dclo %0, %1" : "=r"(res) : "r"(rs));
regs->regs[MIPSInst_RD(ir)] = res;
MIPS_R2_STATS(bops);
return 0;
}
/* R6 removed instructions for the SPECIAL2 opcode */
static const struct r2_decoder_table spec2_op_table[] = {
{ 0xfc00ffff, 0x70000000, madd_func },
{ 0xfc00ffff, 0x70000001, maddu_func },
{ 0xfc0007ff, 0x70000002, mul_func },
{ 0xfc00ffff, 0x70000004, msub_func },
{ 0xfc00ffff, 0x70000005, msubu_func },
{ 0xfc0007ff, 0x70000020, clz_func },
{ 0xfc0007ff, 0x70000021, clo_func },
{ 0xfc0007ff, 0x70000024, dclz_func },
{ 0xfc0007ff, 0x70000025, dclo_func },
{ }
};
static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
const struct r2_decoder_table *table)
{
const struct r2_decoder_table *p;
int err;
for (p = table; p->func; p++) {
if ((inst & p->mask) == p->code) {
err = (p->func)(regs, inst);
return err;
}
}
return SIGILL;
}
/**
* mipsr2_decoder: Decode and emulate a MIPS R2 instruction
* @regs: Process register set
* @inst: Instruction to decode and emulate
2016-10-28 07:21:03 +00:00
* @fcr31: Floating Point Control and Status Register Cause bits returned
*/
int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
{
int err = 0;
unsigned long vaddr;
u32 nir;
unsigned long cpc, epc, nepc, r31, res, rs, rt;
void __user *fault_addr = NULL;
int pass = 0;
repeat:
r31 = regs->regs[31];
epc = regs->cp0_epc;
err = compute_return_epc(regs);
if (err < 0) {
BUG();
return SIGEMT;
}
pr_debug("Emulating the 0x%08x R2 instruction @ 0x%08lx (pass=%d))\n",
inst, epc, pass);
switch (MIPSInst_OPCODE(inst)) {
case spec_op:
err = mipsr2_find_op_func(regs, inst, spec_op_table);
if (err < 0) {
/* FPU instruction under JR */
regs->cp0_cause |= CAUSEF_BD;
goto fpu_emul;
}
break;
case spec2_op:
err = mipsr2_find_op_func(regs, inst, spec2_op_table);
break;
case bcond_op:
rt = MIPSInst_RT(inst);
rs = MIPSInst_RS(inst);
switch (rt) {
case tgei_op:
if ((long)regs->regs[rs] >= MIPSInst_SIMM(inst))
do_trap_or_bp(regs, 0, 0, "TGEI");
MIPS_R2_STATS(traps);
break;
case tgeiu_op:
if (regs->regs[rs] >= MIPSInst_UIMM(inst))
do_trap_or_bp(regs, 0, 0, "TGEIU");
MIPS_R2_STATS(traps);
break;
case tlti_op:
if ((long)regs->regs[rs] < MIPSInst_SIMM(inst))
do_trap_or_bp(regs, 0, 0, "TLTI");
MIPS_R2_STATS(traps);
break;
case tltiu_op:
if (regs->regs[rs] < MIPSInst_UIMM(inst))
do_trap_or_bp(regs, 0, 0, "TLTIU");
MIPS_R2_STATS(traps);
break;
case teqi_op:
if (regs->regs[rs] == MIPSInst_SIMM(inst))
do_trap_or_bp(regs, 0, 0, "TEQI");
MIPS_R2_STATS(traps);
break;
case tnei_op:
if (regs->regs[rs] != MIPSInst_SIMM(inst))
do_trap_or_bp(regs, 0, 0, "TNEI");
MIPS_R2_STATS(traps);
break;
case bltzl_op:
case bgezl_op:
case bltzall_op:
case bgezall_op:
if (delay_slot(regs)) {
err = SIGILL;
break;
}
regs->regs[31] = r31;
regs->cp0_epc = epc;
err = __compute_return_epc(regs);
if (err < 0)
return SIGEMT;
if (err != BRANCH_LIKELY_TAKEN)
break;
cpc = regs->cp0_epc;
nepc = epc + 4;
err = __get_user(nir, (u32 __user *)nepc);
if (err) {
err = SIGSEGV;
break;
}
/*
* This will probably be optimized away when
* CONFIG_DEBUG_FS is not enabled
*/
switch (rt) {
case bltzl_op:
MIPS_R2BR_STATS(bltzl);
break;
case bgezl_op:
MIPS_R2BR_STATS(bgezl);
break;
case bltzall_op:
MIPS_R2BR_STATS(bltzall);
break;
case bgezall_op:
MIPS_R2BR_STATS(bgezall);
break;
}
switch (MIPSInst_OPCODE(nir)) {
case cop1_op:
case cop1x_op:
case lwc1_op:
case swc1_op:
regs->cp0_cause |= CAUSEF_BD;
goto fpu_emul;
}
if (nir) {
err = mipsr6_emul(regs, nir);
if (err > 0) {
MIPS: Use per-mm page to execute branch delay slot instructions In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-08 10:06:19 +00:00
err = mips_dsemul(regs, nir, epc, cpc);
if (err == SIGILL)
err = SIGEMT;
MIPS_R2_STATS(dsemul);
}
}
break;
case bltzal_op:
case bgezal_op:
if (delay_slot(regs)) {
err = SIGILL;
break;
}
regs->regs[31] = r31;
regs->cp0_epc = epc;
err = __compute_return_epc(regs);
if (err < 0)
return SIGEMT;
cpc = regs->cp0_epc;
nepc = epc + 4;
err = __get_user(nir, (u32 __user *)nepc);
if (err) {
err = SIGSEGV;
break;
}
/*
* This will probably be optimized away when
* CONFIG_DEBUG_FS is not enabled
*/
switch (rt) {
case bltzal_op:
MIPS_R2BR_STATS(bltzal);
break;
case bgezal_op:
MIPS_R2BR_STATS(bgezal);
break;
}
switch (MIPSInst_OPCODE(nir)) {
case cop1_op:
case cop1x_op:
case lwc1_op:
case swc1_op:
regs->cp0_cause |= CAUSEF_BD;
goto fpu_emul;
}
if (nir) {
err = mipsr6_emul(regs, nir);
if (err > 0) {
MIPS: Use per-mm page to execute branch delay slot instructions In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-08 10:06:19 +00:00
err = mips_dsemul(regs, nir, epc, cpc);
if (err == SIGILL)
err = SIGEMT;
MIPS_R2_STATS(dsemul);
}
}
break;
default:
regs->regs[31] = r31;
regs->cp0_epc = epc;
err = SIGILL;
break;
}
break;
case blezl_op:
case bgtzl_op:
2017-03-13 15:36:35 +00:00
/*
* For BLEZL and BGTZL, rt field must be set to 0. If this
* is not the case, this may be an encoding of a MIPS R6
* instruction, so return to CPU execution if this occurs
*/
if (MIPSInst_RT(inst)) {
err = SIGILL;
break;
}
fallthrough;
2017-03-13 15:36:35 +00:00
case beql_op:
case bnel_op:
if (delay_slot(regs)) {
err = SIGILL;
break;
}
regs->regs[31] = r31;
regs->cp0_epc = epc;
err = __compute_return_epc(regs);
if (err < 0)
return SIGEMT;
if (err != BRANCH_LIKELY_TAKEN)
break;
cpc = regs->cp0_epc;
nepc = epc + 4;
err = __get_user(nir, (u32 __user *)nepc);
if (err) {
err = SIGSEGV;
break;
}
/*
* This will probably be optimized away when
* CONFIG_DEBUG_FS is not enabled
*/
switch (MIPSInst_OPCODE(inst)) {
case beql_op:
MIPS_R2BR_STATS(beql);
break;
case bnel_op:
MIPS_R2BR_STATS(bnel);
break;
case blezl_op:
MIPS_R2BR_STATS(blezl);
break;
case bgtzl_op:
MIPS_R2BR_STATS(bgtzl);
break;
}
switch (MIPSInst_OPCODE(nir)) {
case cop1_op:
case cop1x_op:
case lwc1_op:
case swc1_op:
regs->cp0_cause |= CAUSEF_BD;
goto fpu_emul;
}
if (nir) {
err = mipsr6_emul(regs, nir);
if (err > 0) {
MIPS: Use per-mm page to execute branch delay slot instructions In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-08 10:06:19 +00:00
err = mips_dsemul(regs, nir, epc, cpc);
if (err == SIGILL)
err = SIGEMT;
MIPS_R2_STATS(dsemul);
}
}
break;
case lwc1_op:
case swc1_op:
case cop1_op:
case cop1x_op:
fpu_emul:
regs->regs[31] = r31;
regs->cp0_epc = epc;
MIPS: Simplify FP context initialization MIPS has up until now had 3 different ways for a task's floating point context to be initialized: - If the task's first use of FP involves it gaining ownership of an FPU then _init_fpu() is used to initialize the FPU's registers such that they all contain ~0, and the FPU registers will be stored to struct thread_info later (eg. when context switching). - If the task first uses FP on a CPU without an associated FPU then fpu_emulator_init_fpu() initializes the task's floating point register state in struct thread_info such that all floating point register contain the bit pattern 0x7ff800007ff80000, different to the _init_fpu() behaviour. - If a task's floating point context is first accessed via ptrace then init_fp_ctx() initializes the floating point register state in struct thread_info to ~0, giving equivalent state to _init_fpu(). The _init_fpu() path has 2 separate implementations - one for r2k/r3k style systems & one for r4k style systems. The _init_fpu() path also requires that we be careful to clear & restore the value of the Config5.FRE bit on modern systems in order to avoid inadvertently triggering floating point exceptions. None of this code is in a performance critical hot path - it runs only the first time a task uses floating point. As such it doesn't seem to warrant the complications of maintaining the _init_fpu() path. Remove _init_fpu() & fpu_emulator_init_fpu(), instead using init_fp_ctx() consistently to initialize floating point register state in struct thread_info. Upon a task's first use of floating point this will typically mean that we initialize state in memory & then load it into FPU registers using _restore_fp() just as we would on a context switch. For other paths such as __compute_return_epc_for_insn() or mipsr2_decoder() this results in a significant simplification of the work to be done. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21002/ Cc: linux-mips@linux-mips.org
2018-11-07 23:13:59 +00:00
err = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
&fault_addr);
/*
2016-10-28 07:21:03 +00:00
* We can't allow the emulated instruction to leave any
* enabled Cause bits set in $fcr31.
*/
2016-10-28 07:21:03 +00:00
*fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~res;
/*
* this is a tricky issue - lose_fpu() uses LL/SC atomics
* if FPU is owned and effectively cancels user level LL/SC.
* So, it could be logical to don't restore FPU ownership here.
* But the sequence of multiple FPU instructions is much much
* more often than LL-FPU-SC and I prefer loop here until
* next scheduler cycle cancels FPU ownership
*/
own_fpu(1); /* Restore FPU state. */
if (err)
current->thread.cp0_baduaddr = (unsigned long)fault_addr;
MIPS_R2_STATS(fpus);
break;
case lwl_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
"1:" LB "%1, 0(%2)\n"
INS "%0, %1, 24, 8\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
"2:" LB "%1, 0(%2)\n"
INS "%0, %1, 16, 8\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
"3:" LB "%1, 0(%2)\n"
INS "%0, %1, 8, 8\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
"4:" LB "%1, 0(%2)\n"
INS "%0, %1, 0, 8\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
"1:" LB "%1, 0(%2)\n"
INS "%0, %1, 24, 8\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
"2:" LB "%1, 0(%2)\n"
INS "%0, %1, 16, 8\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
"3:" LB "%1, 0(%2)\n"
INS "%0, %1, 8, 8\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
"4:" LB "%1, 0(%2)\n"
INS "%0, %1, 0, 8\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9: sll %0, %0, 0\n"
"10:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 10b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV));
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = rt;
MIPS_R2_STATS(loads);
break;
case lwr_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
"1:" LB "%1, 0(%2)\n"
INS "%0, %1, 0, 8\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
"2:" LB "%1, 0(%2)\n"
INS "%0, %1, 8, 8\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
"3:" LB "%1, 0(%2)\n"
INS "%0, %1, 16, 8\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
"4:" LB "%1, 0(%2)\n"
INS "%0, %1, 24, 8\n"
" sll %0, %0, 0\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
"1:" LB "%1, 0(%2)\n"
INS "%0, %1, 0, 8\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
"2:" LB "%1, 0(%2)\n"
INS "%0, %1, 8, 8\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
"3:" LB "%1, 0(%2)\n"
INS "%0, %1, 16, 8\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
"4:" LB "%1, 0(%2)\n"
INS "%0, %1, 24, 8\n"
" sll %0, %0, 0\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
"10:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 10b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV));
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = rt;
MIPS_R2_STATS(loads);
break;
case swl_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
EXT "%1, %0, 24, 8\n"
"1:" SB "%1, 0(%2)\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
EXT "%1, %0, 16, 8\n"
"2:" SB "%1, 0(%2)\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
EXT "%1, %0, 8, 8\n"
"3:" SB "%1, 0(%2)\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
EXT "%1, %0, 0, 8\n"
"4:" SB "%1, 0(%2)\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
EXT "%1, %0, 24, 8\n"
"1:" SB "%1, 0(%2)\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
EXT "%1, %0, 16, 8\n"
"2:" SB "%1, 0(%2)\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
EXT "%1, %0, 8, 8\n"
"3:" SB "%1, 0(%2)\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
EXT "%1, %0, 0, 8\n"
"4:" SB "%1, 0(%2)\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV)
: "memory");
MIPS_R2_STATS(stores);
break;
case swr_op:
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
EXT "%1, %0, 0, 8\n"
"1:" SB "%1, 0(%2)\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
EXT "%1, %0, 8, 8\n"
"2:" SB "%1, 0(%2)\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
EXT "%1, %0, 16, 8\n"
"3:" SB "%1, 0(%2)\n"
ADDIU "%2, %2, 1\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
EXT "%1, %0, 24, 8\n"
"4:" SB "%1, 0(%2)\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
EXT "%1, %0, 0, 8\n"
"1:" SB "%1, 0(%2)\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
EXT "%1, %0, 8, 8\n"
"2:" SB "%1, 0(%2)\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
EXT "%1, %0, 16, 8\n"
"3:" SB "%1, 0(%2)\n"
" andi %1, %2, 0x3\n"
" beq $0, %1, 9f\n"
ADDIU "%2, %2, -1\n"
EXT "%1, %0, 24, 8\n"
"4:" SB "%1, 0(%2)\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV)
: "memory");
MIPS_R2_STATS(stores);
break;
case ldl_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT)) {
err = SIGILL;
break;
}
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
"1: lb %1, 0(%2)\n"
" dinsu %0, %1, 56, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"2: lb %1, 0(%2)\n"
" dinsu %0, %1, 48, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"3: lb %1, 0(%2)\n"
" dinsu %0, %1, 40, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"4: lb %1, 0(%2)\n"
" dinsu %0, %1, 32, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"5: lb %1, 0(%2)\n"
" dins %0, %1, 24, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"6: lb %1, 0(%2)\n"
" dins %0, %1, 16, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"7: lb %1, 0(%2)\n"
" dins %0, %1, 8, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"0: lb %1, 0(%2)\n"
" dins %0, %1, 0, 8\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
"1: lb %1, 0(%2)\n"
" dinsu %0, %1, 56, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"2: lb %1, 0(%2)\n"
" dinsu %0, %1, 48, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"3: lb %1, 0(%2)\n"
" dinsu %0, %1, 40, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"4: lb %1, 0(%2)\n"
" dinsu %0, %1, 32, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"5: lb %1, 0(%2)\n"
" dins %0, %1, 24, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"6: lb %1, 0(%2)\n"
" dins %0, %1, 16, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"7: lb %1, 0(%2)\n"
" dins %0, %1, 8, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"0: lb %1, 0(%2)\n"
" dins %0, %1, 0, 8\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
STR(PTR_WD) " 5b,8b\n"
STR(PTR_WD) " 6b,8b\n"
STR(PTR_WD) " 7b,8b\n"
STR(PTR_WD) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV));
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = rt;
MIPS_R2_STATS(loads);
break;
case ldr_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT)) {
err = SIGILL;
break;
}
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
"1: lb %1, 0(%2)\n"
" dins %0, %1, 0, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"2: lb %1, 0(%2)\n"
" dins %0, %1, 8, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"3: lb %1, 0(%2)\n"
" dins %0, %1, 16, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"4: lb %1, 0(%2)\n"
" dins %0, %1, 24, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"5: lb %1, 0(%2)\n"
" dinsu %0, %1, 32, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"6: lb %1, 0(%2)\n"
" dinsu %0, %1, 40, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"7: lb %1, 0(%2)\n"
" dinsu %0, %1, 48, 8\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
"0: lb %1, 0(%2)\n"
" dinsu %0, %1, 56, 8\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
"1: lb %1, 0(%2)\n"
" dins %0, %1, 0, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"2: lb %1, 0(%2)\n"
" dins %0, %1, 8, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"3: lb %1, 0(%2)\n"
" dins %0, %1, 16, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"4: lb %1, 0(%2)\n"
" dins %0, %1, 24, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"5: lb %1, 0(%2)\n"
" dinsu %0, %1, 32, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"6: lb %1, 0(%2)\n"
" dinsu %0, %1, 40, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"7: lb %1, 0(%2)\n"
" dinsu %0, %1, 48, 8\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
"0: lb %1, 0(%2)\n"
" dinsu %0, %1, 56, 8\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
STR(PTR_WD) " 5b,8b\n"
STR(PTR_WD) " 6b,8b\n"
STR(PTR_WD) " 7b,8b\n"
STR(PTR_WD) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV));
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = rt;
MIPS_R2_STATS(loads);
break;
case sdl_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT)) {
err = SIGILL;
break;
}
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
" dextu %1, %0, 56, 8\n"
"1: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 48, 8\n"
"2: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 40, 8\n"
"3: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 32, 8\n"
"4: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 24, 8\n"
"5: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 16, 8\n"
"6: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 8, 8\n"
"7: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 0, 8\n"
"0: sb %1, 0(%2)\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
" dextu %1, %0, 56, 8\n"
"1: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 48, 8\n"
"2: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 40, 8\n"
"3: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 32, 8\n"
"4: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 24, 8\n"
"5: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 16, 8\n"
"6: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 8, 8\n"
"7: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 0, 8\n"
"0: sb %1, 0(%2)\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
STR(PTR_WD) " 5b,8b\n"
STR(PTR_WD) " 6b,8b\n"
STR(PTR_WD) " 7b,8b\n"
STR(PTR_WD) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV)
: "memory");
MIPS_R2_STATS(stores);
break;
case sdr_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT)) {
err = SIGILL;
break;
}
rt = regs->regs[MIPSInst_RT(inst)];
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGSEGV;
break;
}
__asm__ __volatile__(
" .set push\n"
" .set reorder\n"
#ifdef CONFIG_CPU_LITTLE_ENDIAN
" dext %1, %0, 0, 8\n"
"1: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 8, 8\n"
"2: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 16, 8\n"
"3: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dext %1, %0, 24, 8\n"
"4: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 32, 8\n"
"5: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 40, 8\n"
"6: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 48, 8\n"
"7: sb %1, 0(%2)\n"
" daddiu %2, %2, 1\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" dextu %1, %0, 56, 8\n"
"0: sb %1, 0(%2)\n"
#else /* !CONFIG_CPU_LITTLE_ENDIAN */
" dext %1, %0, 0, 8\n"
"1: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 8, 8\n"
"2: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 16, 8\n"
"3: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dext %1, %0, 24, 8\n"
"4: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 32, 8\n"
"5: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 40, 8\n"
"6: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 48, 8\n"
"7: sb %1, 0(%2)\n"
" andi %1, %2, 0x7\n"
" beq $0, %1, 9f\n"
" daddiu %2, %2, -1\n"
" dextu %1, %0, 56, 8\n"
"0: sb %1, 0(%2)\n"
#endif /* CONFIG_CPU_LITTLE_ENDIAN */
"9:\n"
" .insn\n"
" .section .fixup,\"ax\"\n"
"8: li %3,%4\n"
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,8b\n"
STR(PTR_WD) " 2b,8b\n"
STR(PTR_WD) " 3b,8b\n"
STR(PTR_WD) " 4b,8b\n"
STR(PTR_WD) " 5b,8b\n"
STR(PTR_WD) " 6b,8b\n"
STR(PTR_WD) " 7b,8b\n"
STR(PTR_WD) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
"+&r"(vaddr), "+&r"(err)
: "i"(SIGSEGV)
: "memory");
MIPS_R2_STATS(stores);
break;
case ll_op:
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (vaddr & 0x3) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
if (!cpu_has_rw_llb) {
/*
* An LL/SC block can't be safely emulated without
* a Config5/LLB availability. So it's probably time to
* kill our process before things get any worse. This is
* because Config5/LLB allows us to use ERETNC so that
* the LLAddr/LLB bit is not cleared when we return from
* an exception. MIPS R2 LL/SC instructions trap with an
* RI exception so once we emulate them here, we return
* back to userland with ERETNC. That preserves the
* LLAddr/LLB so the subsequent SC instruction will
* succeed preserving the atomic semantics of the LL/SC
* block. Without that, there is no safe way to emulate
* an LL/SC block in MIPSR2 userland.
*/
pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
err = SIGKILL;
break;
}
__asm__ __volatile__(
"1:\n"
"ll %0, 0(%2)\n"
"2:\n"
".insn\n"
".section .fixup,\"ax\"\n"
"3:\n"
"li %1, %3\n"
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,3b\n"
".previous\n"
: "=&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV)
: "memory");
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = res;
MIPS_R2_STATS(llsc);
break;
case sc_op:
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (vaddr & 0x3) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 4)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
if (!cpu_has_rw_llb) {
/*
* An LL/SC block can't be safely emulated without
* a Config5/LLB availability. So it's probably time to
* kill our process before things get any worse. This is
* because Config5/LLB allows us to use ERETNC so that
* the LLAddr/LLB bit is not cleared when we return from
* an exception. MIPS R2 LL/SC instructions trap with an
* RI exception so once we emulate them here, we return
* back to userland with ERETNC. That preserves the
* LLAddr/LLB so the subsequent SC instruction will
* succeed preserving the atomic semantics of the LL/SC
* block. Without that, there is no safe way to emulate
* an LL/SC block in MIPSR2 userland.
*/
pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
err = SIGKILL;
break;
}
res = regs->regs[MIPSInst_RT(inst)];
__asm__ __volatile__(
"1:\n"
"sc %0, 0(%2)\n"
"2:\n"
".insn\n"
".section .fixup,\"ax\"\n"
"3:\n"
"li %1, %3\n"
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,3b\n"
".previous\n"
: "+&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV));
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = res;
MIPS_R2_STATS(llsc);
break;
case lld_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT)) {
err = SIGILL;
break;
}
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (vaddr & 0x7) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
if (!cpu_has_rw_llb) {
/*
* An LL/SC block can't be safely emulated without
* a Config5/LLB availability. So it's probably time to
* kill our process before things get any worse. This is
* because Config5/LLB allows us to use ERETNC so that
* the LLAddr/LLB bit is not cleared when we return from
* an exception. MIPS R2 LL/SC instructions trap with an
* RI exception so once we emulate them here, we return
* back to userland with ERETNC. That preserves the
* LLAddr/LLB so the subsequent SC instruction will
* succeed preserving the atomic semantics of the LL/SC
* block. Without that, there is no safe way to emulate
* an LL/SC block in MIPSR2 userland.
*/
pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
err = SIGKILL;
break;
}
__asm__ __volatile__(
"1:\n"
"lld %0, 0(%2)\n"
"2:\n"
".insn\n"
".section .fixup,\"ax\"\n"
"3:\n"
"li %1, %3\n"
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,3b\n"
".previous\n"
: "=&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV)
: "memory");
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = res;
MIPS_R2_STATS(llsc);
break;
case scd_op:
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_32BIT)) {
err = SIGILL;
break;
}
vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst);
if (vaddr & 0x7) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 02:57:57 +00:00
if (!access_ok((void __user *)vaddr, 8)) {
current->thread.cp0_baduaddr = vaddr;
err = SIGBUS;
break;
}
if (!cpu_has_rw_llb) {
/*
* An LL/SC block can't be safely emulated without
* a Config5/LLB availability. So it's probably time to
* kill our process before things get any worse. This is
* because Config5/LLB allows us to use ERETNC so that
* the LLAddr/LLB bit is not cleared when we return from
* an exception. MIPS R2 LL/SC instructions trap with an
* RI exception so once we emulate them here, we return
* back to userland with ERETNC. That preserves the
* LLAddr/LLB so the subsequent SC instruction will
* succeed preserving the atomic semantics of the LL/SC
* block. Without that, there is no safe way to emulate
* an LL/SC block in MIPSR2 userland.
*/
pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");
err = SIGKILL;
break;
}
res = regs->regs[MIPSInst_RT(inst)];
__asm__ __volatile__(
"1:\n"
"scd %0, 0(%2)\n"
"2:\n"
".insn\n"
".section .fixup,\"ax\"\n"
"3:\n"
"li %1, %3\n"
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
STR(PTR_WD) " 1b,3b\n"
".previous\n"
: "+&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV));
if (MIPSInst_RT(inst) && !err)
regs->regs[MIPSInst_RT(inst)] = res;
MIPS_R2_STATS(llsc);
break;
case pref_op:
/* skip it */
break;
default:
err = SIGILL;
}
/*
* Let's not return to userland just yet. It's costly and
* it's likely we have more R2 instructions to emulate
*/
if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) {
regs->cp0_cause &= ~CAUSEF_BD;
err = get_user(inst, (u32 __user *)regs->cp0_epc);
if (!err)
goto repeat;
if (err < 0)
err = SIGSEGV;
}
if (err && (err != SIGEMT)) {
regs->regs[31] = r31;
regs->cp0_epc = epc;
}
/* Likely a MIPS R6 compatible instruction */
if (pass && (err == SIGILL))
err = 0;
return err;
}
#ifdef CONFIG_DEBUG_FS
static int mipsr2_emul_show(struct seq_file *s, void *unused)
{
seq_printf(s, "Instruction\tTotal\tBDslot\n------------------------------\n");
seq_printf(s, "movs\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.movs),
(unsigned long)__this_cpu_read(mipsr2bdemustats.movs));
seq_printf(s, "hilo\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.hilo),
(unsigned long)__this_cpu_read(mipsr2bdemustats.hilo));
seq_printf(s, "muls\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.muls),
(unsigned long)__this_cpu_read(mipsr2bdemustats.muls));
seq_printf(s, "divs\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.divs),
(unsigned long)__this_cpu_read(mipsr2bdemustats.divs));
seq_printf(s, "dsps\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.dsps),
(unsigned long)__this_cpu_read(mipsr2bdemustats.dsps));
seq_printf(s, "bops\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.bops),
(unsigned long)__this_cpu_read(mipsr2bdemustats.bops));
seq_printf(s, "traps\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.traps),
(unsigned long)__this_cpu_read(mipsr2bdemustats.traps));
seq_printf(s, "fpus\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.fpus),
(unsigned long)__this_cpu_read(mipsr2bdemustats.fpus));
seq_printf(s, "loads\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.loads),
(unsigned long)__this_cpu_read(mipsr2bdemustats.loads));
seq_printf(s, "stores\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.stores),
(unsigned long)__this_cpu_read(mipsr2bdemustats.stores));
seq_printf(s, "llsc\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.llsc),
(unsigned long)__this_cpu_read(mipsr2bdemustats.llsc));
seq_printf(s, "dsemul\t\t%ld\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2emustats.dsemul),
(unsigned long)__this_cpu_read(mipsr2bdemustats.dsemul));
seq_printf(s, "jr\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.jrs));
seq_printf(s, "bltzl\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bltzl));
seq_printf(s, "bgezl\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bgezl));
seq_printf(s, "bltzll\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bltzll));
seq_printf(s, "bgezll\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bgezll));
seq_printf(s, "bltzal\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bltzal));
seq_printf(s, "bgezal\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bgezal));
seq_printf(s, "beql\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.beql));
seq_printf(s, "bnel\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bnel));
seq_printf(s, "blezl\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.blezl));
seq_printf(s, "bgtzl\t\t%ld\n",
(unsigned long)__this_cpu_read(mipsr2bremustats.bgtzl));
return 0;
}
static int mipsr2_clear_show(struct seq_file *s, void *unused)
{
mipsr2_emul_show(s, unused);
__this_cpu_write((mipsr2emustats).movs, 0);
__this_cpu_write((mipsr2bdemustats).movs, 0);
__this_cpu_write((mipsr2emustats).hilo, 0);
__this_cpu_write((mipsr2bdemustats).hilo, 0);
__this_cpu_write((mipsr2emustats).muls, 0);
__this_cpu_write((mipsr2bdemustats).muls, 0);
__this_cpu_write((mipsr2emustats).divs, 0);
__this_cpu_write((mipsr2bdemustats).divs, 0);
__this_cpu_write((mipsr2emustats).dsps, 0);
__this_cpu_write((mipsr2bdemustats).dsps, 0);
__this_cpu_write((mipsr2emustats).bops, 0);
__this_cpu_write((mipsr2bdemustats).bops, 0);
__this_cpu_write((mipsr2emustats).traps, 0);
__this_cpu_write((mipsr2bdemustats).traps, 0);
__this_cpu_write((mipsr2emustats).fpus, 0);
__this_cpu_write((mipsr2bdemustats).fpus, 0);
__this_cpu_write((mipsr2emustats).loads, 0);
__this_cpu_write((mipsr2bdemustats).loads, 0);
__this_cpu_write((mipsr2emustats).stores, 0);
__this_cpu_write((mipsr2bdemustats).stores, 0);
__this_cpu_write((mipsr2emustats).llsc, 0);
__this_cpu_write((mipsr2bdemustats).llsc, 0);
__this_cpu_write((mipsr2emustats).dsemul, 0);
__this_cpu_write((mipsr2bdemustats).dsemul, 0);
__this_cpu_write((mipsr2bremustats).jrs, 0);
__this_cpu_write((mipsr2bremustats).bltzl, 0);
__this_cpu_write((mipsr2bremustats).bgezl, 0);
__this_cpu_write((mipsr2bremustats).bltzll, 0);
__this_cpu_write((mipsr2bremustats).bgezll, 0);
__this_cpu_write((mipsr2bremustats).bltzall, 0);
__this_cpu_write((mipsr2bremustats).bgezall, 0);
__this_cpu_write((mipsr2bremustats).bltzal, 0);
__this_cpu_write((mipsr2bremustats).bgezal, 0);
__this_cpu_write((mipsr2bremustats).beql, 0);
__this_cpu_write((mipsr2bremustats).bnel, 0);
__this_cpu_write((mipsr2bremustats).blezl, 0);
__this_cpu_write((mipsr2bremustats).bgtzl, 0);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(mipsr2_emul);
DEFINE_SHOW_ATTRIBUTE(mipsr2_clear);
static int __init mipsr2_init_debugfs(void)
{
debugfs_create_file("r2_emul_stats", S_IRUGO, mips_debugfs_dir, NULL,
&mipsr2_emul_fops);
debugfs_create_file("r2_emul_stats_clear", S_IRUGO, mips_debugfs_dir,
NULL, &mipsr2_clear_fops);
return 0;
}
device_initcall(mipsr2_init_debugfs);
#endif /* CONFIG_DEBUG_FS */