freebsd-src/release/netinst.sh
Jordan K. Hubbard ea13c2c9b5 1. Remove ppp options. There's no room in the generic kernel.
2. Fix some extra `:'s in some of the ftp site names.
1994-12-05 00:40:25 +00:00

209 lines
5.9 KiB
Bash

#!/stand/sh
#
# netinst.sh - configure the user's network.
#
# Written: November 11th, 1994
# Copyright (C) 1994 by Jordan K. Hubbard
#
# Permission to copy or use this software for any purpose is granted
# provided that this message stay intact, and at this location (e.g. no
# putting your name on top after doing something trivial like reindenting
# it, just to make it look like you wrote it!).
#
# $Id: netinst.sh,v 1.16 1994/12/05 00:13:11 ache Exp $
if [ "${_NETINST_SH_LOADED_}" = "yes" ]; then
return 0
else
_NETINST_SH_LOADED_=yes
fi
# Grab the miscellaneous functions.
. /stand/miscfuncs.sh
network_set_defaults()
{
HOSTNAME=""
DOMAIN=""
NETMASK="0xffffff00"
IPADDR="127.0.0.1"
IFCONFIG_FLAGS=""
REMOTE_HOSTIP=""
REMOTE_IPADDR=""
INTERFACE=""
SERIAL_INTERFACE="/dev/cuaa0"
SERIAL_SPEED="38400"
}
network_basic_setup()
{
HOSTNAME=""
while [ "${HOSTNAME}" = "" ]; do
DEFAULT_VALUE=""
if ! network_dialog "What is the fully qualified name of this host?"; then return 1; fi
if [ "${ANSWER}" = "" ]; then
error "You must select a host name!"
continue
else
HOSTNAME=${ANSWER}
fi
done
echo ${HOSTNAME} > ${ETC}/myname
${HOSTNAME_CMD} ${HOSTNAME}
DEFAULT_VALUE=`echo ${HOSTNAME} | sed -e 's/[^.]*\.//' | grep \.`
if network_dialog "What is the domain name of this host (Internet, not YP/NIS)?"; then
DOMAIN=${ANSWER}
fi
DEFAULT_VALUE=${IPADDR}
if ! network_dialog "What is the IP address of this host?"; then return 1; fi
IPADDR=${ANSWER}
echo "${IPADDR} ${HOSTNAME} `echo ${HOSTNAME} | sed -e 's/\.${DOMAIN}//'`" >> ${ETC}/hosts
}
network_setup_ether()
{
dialog --title "Ethernet Interface Name" --menu \
"Please select the type of ethernet interface you have:\n" -1 -1 8 \
"ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280" \
"ed1" "Same as above, but at address 0x300 and IRQ 5" \
"ep0" "3COM 3C509 at address 0x300 and IRQ 10" \
"de0" "DEC PCI ethernet adapter (or compatible)" \
"ie0" "AT&T StarLan and EN100 family at 0x360 and IRQ 7" \
"is0" "Isolan 4141-0 or Isolink 4110 at 0x280 and IRQ 7" \
"le0" "DEC Etherworks ethernet adapter" \
"ze0" "PCMCIA IBM or National card at 0x300 and IRQ 5" \
2> ${TMP}/menu.tmp.$$
RETVAL=$?
INTERFACE=`cat ${TMP}/menu.tmp.$$`
rm -f ${TMP}/menu.tmp.$$
if ! handle_rval ${RETVAL}; then return 1; fi
}
network_setup_remote()
{
DEFAULT_VALUE="${REMOTE_IPADDR}"
if ! network_dialog "What is the IP number for the remote host?"; then
return 1
fi
REMOTE_IPADDR=${ANSWER}
}
network_setup_serial()
{
network_setup_remote
INTERFACE=$1
DEFAULT_VALUE=${SERIAL_INTERFACE}
if ! network_dialog "What serial port do you wish to use?"; then
return 1
fi
SERIAL_INTERFACE=${ANSWER}
DEFAULT_VALUE=${SERIAL_SPEED}
if ! network_dialog "What speed is the serial connection?"; then
return 1
fi
SERIAL_SPEED=${ANSWER}
if dialog --title "Dial" --yesno \
"Do you need to dial the phone or otherwise talk to the modem?" \
-1 -1; then
mkdir -p /var/log
touch -f /var/log/aculog > /dev/null 2>&1
chmod 666 /var/log/aculog > /dev/null 2>&1
confirm \
"You may now dialog with your modem and set up the connection.
Be sure to disable DTR sensitivity (usually with AT&D0) or the
modem may hang up when you exit 'cu'. Use ~. to exit cu and
continue."
dialog --clear
# Grottyness to deal with a weird crunch bug.
if [ ! -f /stand/cu ]; then ln /stand/tip /stand/cu; fi
/stand/cu -l ${SERIAL_INTERFACE} -s ${SERIAL_SPEED}
dialog --clear
fi
}
network_setup_plip()
{
network_setup_remote
INTERFACE=lp0
}
network_setup()
{
DONE=0
while [ "${INTERFACE}" = "" ]; do
dialog --title "Set up network interface" --menu \
"Please select the type of network connection you have:\n" \
-1 -1 3 \
"Ether" "A supported ethernet card" \
"SLIP" "A point-to-point SLIP (Serial Line IP) connection" \
"PLIP" "A Parallel-Line IP setup (with standard laplink cable)" \
2> ${TMP}/menu.tmp.$$
RETVAL=$?
CHOICE=`cat ${TMP}/menu.tmp.$$`
rm -f ${TMP}/menu.tmp.$$
if ! handle_rval ${RETVAL}; then return 1; fi
case ${CHOICE} in
Ether) if ! network_setup_ether; then continue; fi ;;
SLIP) if ! network_setup_serial sl0; then continue; fi ;;
PLIP) if ! network_setup_plip; then continue; fi ;;
esac
if [ "${INTERFACE}" = "" ]; then continue; fi
network_basic_setup
DEFAULT_VALUE="${NETMASK}"
if network_dialog "Please specify the netmask"; then
if [ "${ANSWER}" != "" ]; then
NETMASK=${ANSWER}
fi
fi
DEFAULT_VALUE=""
if network_dialog "Set extra flags to ${IFCONFIG_CMD}?"; then
IFCONFIG_FLAGS=${ANSWER}
fi
echo "Progress <${IFCONFIG_CMD} ${INTERFACE} ${IPADDR} ${REMOTE_IPADDR} netmask ${NETMASK} ${IFCONFIG_FLAGS}>" >/dev/ttyv1
if ! ${IFCONFIG_CMD} ${INTERFACE} ${IPADDR} ${REMOTE_IPADDR} netmask ${NETMASK} ${IFCONFIG_FLAGS} > /dev/ttyv1 2>&1 ; then
error "Unable to configure interface ${INTERFACE}"
IPADDR=""
INTERFACE=""
continue
fi
if [ "${INTERFACE}" = "sl0" ]; then
DEFAULT_VALUE=${SLATTACH_FLAGS}
if network_dialog "Set extra flags to ${SLATTACH_CMD}?"; then
SLATTACH_FLAGS=${ANSWER}
fi
${SLATTACH_CMD} ${SLATTACH_FLAGS} ${SERIAL_SPEED} ${SERIAL_INTERFACE}
progress ${SLATTACH_CMD} ${SLATTACH_FLAGS} ${SERIAL_SPEED} ${SERIAL_INTERFACE}
fi
echo "${IPADDR} ${REMOTE_IPADDR} netmask ${NETMASK} ${IFCONFIG_FLAGS}" > ${ETC}/hostname.${INTERFACE}
DEFAULT_VALUE=""
if network_dialog "If you have a default gateway, enter its IP address"; then
if [ "${ANSWER}" != "" ]; then
GATEWAY=${ANSWER}
${ROUTE_CMD} ${ROUTE_FLAGS} ${GATEWAY} > /dev/ttyv1 2>&1
progress ${ROUTE_CMD} ${ROUTE_FLAGS} ${GATEWAY}
echo ${GATEWAY} > ${ETC}/defaultrouter
fi
fi
DEFAULT_VALUE=""
if network_dialog "If you have a name server, enter its IP address"; then
if [ "${ANSWER}" != "" ]; then
NAMESERVER=${ANSWER}
echo "domain ${DOMAIN}" > ${ETC}/resolv.conf
echo "nameserver ${NAMESERVER}" >> ${ETC}/resolv.conf
fi
fi
done
return 0
}