freebsd-src/sys/dev/iicbus/iiconf.h
Nicolas Souchu c3e2dc6b48 Submitted by: nsouch
Philips I2C bus generic support other new bus architecture.
1998-09-03 20:51:50 +00:00

116 lines
3.7 KiB
C

/*-
* Copyright (c) 1998 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: iiconf.h,v 1.1.1.10 1998/08/13 17:10:43 son Exp $
*/
#ifndef __IICONF_H
#define __IICONF_H
#include <sys/queue.h>
#define IICPRI PZERO+8 /* XXX sleep/wakeup queue priority */
#define n(flags) (~(flags) & (flags))
#define LSB 0x1
/*
* How tsleep() is called in iic_request_bus().
*/
#define IIC_DONTWAIT 0
#define IIC_NOINTR 0
#define IIC_WAIT 0x1
#define IIC_INTR 0x2
/*
* i2c modes
*/
#define IIC_MASTER 0x1
#define IIC_SLAVE 0x2
#define IIC_POLLED 0x4
/*
* i2c speed
*/
#define IIC_UNKNOWN 0x0
#define IIC_SLOW 0x1
#define IIC_FAST 0x2
#define IIC_FASTEST 0x3
/*
* interrupt events
*/
#define INTR_GENERAL 0x1 /* general call received */
#define INTR_START 0x2 /* the I2C interface is addressed */
#define INTR_STOP 0x3 /* stop condition received */
#define INTR_RECEIVE 0x4 /* character received */
#define INTR_TRANSMIT 0x5 /* character to transmit */
#define INTR_ERROR 0x6 /* error */
#define INTR_NOACK 0x7 /* no ack from master receiver */
/*
* adapter layer errors
*/
#define IIC_NOERR 0x0 /* no error occured */
#define IIC_EBUSERR 0x1 /* bus error */
#define IIC_ENOACK 0x2 /* ack not received until timeout */
#define IIC_ETIMEOUT 0x3 /* timeout */
#define IIC_EBUSBSY 0x4 /* bus busy */
#define IIC_ESTATUS 0x5 /* status error */
#define IIC_EUNDERFLOW 0x6 /* slave ready for more data */
#define IIC_EOVERFLOW 0x7 /* too much data */
/*
* ivars codes
*/
#define IICBUS_IVAR_ADDR 0x1 /* I2C address of the device */
extern int iicbus_request_bus(device_t, device_t, int);
extern int iicbus_release_bus(device_t, device_t);
extern device_t iicbus_alloc_bus(device_t);
extern void iicbus_intr(device_t, int, char *);
#define iicbus_repeated_start(bus,slave) \
(IICBUS_REPEATED_START(device_get_parent(bus), slave))
#define iicbus_start(bus,slave) \
(IICBUS_START(device_get_parent(bus), slave))
#define iicbus_stop(bus) \
(IICBUS_STOP(device_get_parent(bus)))
#define iicbus_reset(bus,speed) \
(IICBUS_RESET(device_get_parent(bus), speed))
#define iicbus_write(bus,buf,len,sent) \
(IICBUS_WRITE(device_get_parent(bus), buf, len, sent))
#define iicbus_read(bus,buf,len,sent) \
(IICBUS_READ(device_get_parent(bus), buf, len, sent))
extern int iicbus_block_write(device_t, u_char, char *, int, int *);
extern int iicbus_block_read(device_t, u_char, char *, int, int *);
extern u_char iicbus_get_addr(device_t);
extern u_char iicbus_get_own_address(device_t);
#endif