freebsd-src/sys/arm/qualcomm/ipq4018_machdep.c

/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2021 Adrian Chadd <adrian@FreeBSD.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include "opt_platform.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/reboot.h>
#include <sys/devmap.h>
#include <sys/physmem.h>
#include <sys/lock.h>

#include <vm/vm.h>

#include <machine/bus.h>
#include <machine/fdt.h>
#include <machine/intr.h>
#include <machine/machdep.h>
#include <machine/platformvar.h>

#include <dev/fdt/fdt_common.h>
#include <dev/ofw/openfirm.h>

#include <arm/qualcomm/ipq4018_machdep.h>
#include <arm/qualcomm/ipq4018_reg.h>

#include "platform_if.h"

static int
ipq4018_attach(platform_t plat)
{
	return (0);
}

static void
ipq4018_late_init(platform_t plat)
{
	/*
	 * XXX FIXME This is needed because we're not parsing
	 * the fdt reserved memory regions in a consistent way
	 * between arm/arm64.  Once the reserved region parsing
	 * is fixed up this will become unneccessary.
	 *
	 * These cover the SRAM/TZ regions that are not fully
	 * accessible from the OS.  They're in the ipq4018.dtsi
	 * tree.
	 *
	 * Without these, the system fails to boot because we
	 * aren't parsing the regions correctly.
	 *
	 * These will be unnecessary once the parser and setup
	 * code is fixed.
	 */
	physmem_exclude_region(IPQ4018_MEM_SMEM_START,
	    IPQ4018_MEM_SMEM_SIZE,
	    EXFLAG_NODUMP | EXFLAG_NOALLOC);
	physmem_exclude_region(IPQ4018_MEM_TZ_START,
	    IPQ4018_MEM_TZ_SIZE,
	    EXFLAG_NODUMP | EXFLAG_NOALLOC);
}

static int
ipq4018_devmap_init(platform_t plat)
{
	/*
	 * This covers the boot UART.  Without it we can't boot successfully:
	 * there's a mutex uninit panic in subr_vmem.c that occurs when doing
	 * a call to pmap_mapdev() when the bus space code is doing its thing.
	 */
	devmap_add_entry(IPQ4018_MEM_UART1_START, IPQ4018_MEM_UART1_SIZE);

	/*
	 * This covers a bunch of the reset block, which includes the PS-HOLD
	 * register for dropping power.
	 */
	devmap_add_entry(IPQ4018_MEM_PSHOLD_START, IPQ4018_MEM_PSHOLD_SIZE);

	return (0);
}

/*
 * This toggles the PS-HOLD register which on most IPQ devices will toggle
 * the power control block and reset the SoC.
 *
 * However, there are apparently some units out there where this is not
 * appropriate and instead the watchdog needs to be used.
 *
 * For now since there's only going to be one or two initial supported boards
 * this will be fine.  But if this doesn't reboot cleanly, now you know.
 */
static void
ipq4018_cpu_reset_pshold(void)
{
	bus_space_handle_t pshold;

	printf("%s: called\n", __func__);

	bus_space_map(fdtbus_bs_tag, IPQ4018_MEM_PSHOLD_START,
	    IPQ4018_MEM_PSHOLD_SIZE, 0, &pshold);
	bus_space_write_4(fdtbus_bs_tag, pshold, 0, 0);
	bus_space_barrier(fdtbus_bs_tag, pshold, 0, 0x4,
	    BUS_SPACE_BARRIER_WRITE);
}

static void
ipq4018_cpu_reset(platform_t plat)
{
	spinlock_enter();
	dsb();

	ipq4018_cpu_reset_pshold();

	/* Spin */
	printf("%s: spinning\n", __func__);
	while(1)
		;
}

/*
 * Early putc routine for EARLY_PRINTF support.  To use, add to kernel config:
 *   option SOCDEV_PA=0x07800000
 *   option SOCDEV_VA=0x07800000
 *   option EARLY_PRINTF
 * Resist the temptation to change the #if 0 to #ifdef EARLY_PRINTF here. It
 * makes sense now, but if multiple SOCs do that it will make early_putc another
 * duplicate symbol to be eliminated on the path to a generic kernel.
 */
#if 0
void
qca_msm_early_putc(int c)
{
	static int is_init = 0;

	int limit;
/*
 * This must match what's put into SOCDEV_VA.  You have to change them
 * both together.
 *
 * XXX TODO I should really go and just make UART_BASE here depend upon
 * SOCDEV_VA so they move together.
 */
#define UART_BASE IPQ4018_MEM_UART1_START
	volatile uint32_t * UART_DM_TF0 = (uint32_t *)(UART_BASE + 0x70);
	volatile uint32_t * UART_DM_SR = (uint32_t *)(UART_BASE + 0x08);
#define UART_DM_SR_TXEMT (1 << 3)
#define UART_DM_SR_TXRDY (1 << 2)
	volatile uint32_t * UART_DM_ISR = (uint32_t *)(UART_BASE + 0x14);
	volatile uint32_t * UART_DM_CR = (uint32_t *)(UART_BASE + 0x10);
#define UART_DM_TX_READY (1 << 7)
#define UART_DM_CLEAR_TX_READY 0x300
	volatile uint32_t * UART_DM_NO_CHARS_FOR_TX = (uint32_t *)(UART_BASE + 0x40);
	volatile uint32_t * UART_DM_TFWR = (uint32_t *)(UART_BASE + 0x1c);
#define UART_DM_TFW_VALUE 0
	volatile uint32_t * UART_DM_IPR = (uint32_t *)(UART_BASE + 0x18);
#define  UART_DM_STALE_TIMEOUT_LSB 0xf

	if (is_init == 0) {
		is_init = 1;
		*UART_DM_TFWR = UART_DM_TFW_VALUE;
		wmb();
		*UART_DM_IPR = UART_DM_STALE_TIMEOUT_LSB;
		wmb();
	}

	/* Wait until TXFIFO is empty via ISR */
	limit = 100000;
	if ((*UART_DM_SR & UART_DM_SR_TXEMT) == 0) {
		while (((*UART_DM_ISR & UART_DM_TX_READY) == 0) && --limit) {
			/* Note - can't use DELAY here yet, too early */
			rmb();
		}
		*UART_DM_CR = UART_DM_CLEAR_TX_READY;
		wmb();
	}

	/* FIFO is ready.  Say we're going to write one byte */
	*UART_DM_NO_CHARS_FOR_TX = 1;
	wmb();

	limit = 100000;
	while (((*UART_DM_SR & UART_DM_SR_TXRDY) == 0) && --limit) {
		/* Note - can't use DELAY here yet, too early */
		rmb();
	}

	/* Put character in first fifo slot */
	*UART_DM_TF0 = c;
	wmb();
}
early_putc_t *early_putc = qca_msm_early_putc;
#endif

static platform_method_t ipq4018_methods[] = {
	PLATFORMMETHOD(platform_attach,         ipq4018_attach),
	PLATFORMMETHOD(platform_devmap_init,    ipq4018_devmap_init),
	PLATFORMMETHOD(platform_late_init,      ipq4018_late_init),
	PLATFORMMETHOD(platform_cpu_reset,      ipq4018_cpu_reset),

#ifdef SMP
	PLATFORMMETHOD(platform_mp_start_ap,    ipq4018_mp_start_ap),
	PLATFORMMETHOD(platform_mp_setmaxid,    ipq4018_mp_setmaxid),
#endif

	PLATFORMMETHOD_END,
};

FDT_PLATFORM_DEF2(ipq4018, ipq4018_ac58u, "ASUS RT-AC58U", 0,
    "asus,rt-ac58u", 80);