freebsd-src/lib/libc/gmon/mcount.c
Warner Losh dc36d6f9bb lib: Remove ancient SCCS tags.
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.

Sponsored by:		Netflix
2023-11-26 22:23:28 -07:00

317 lines
9 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1983, 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/gmon.h>
#ifdef _KERNEL
#include <sys/systm.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
void bintr(void);
void btrap(void);
void eintr(void);
void user(void);
#endif
#include <machine/atomic.h>
/*
* mcount is called on entry to each function compiled with the profiling
* switch set. _mcount(), which is declared in a machine-dependent way
* with _MCOUNT_DECL, does the actual work and is either inlined into a
* C routine or called by an assembly stub. In any case, this magic is
* taken care of by the MCOUNT definition in <machine/profile.h>.
*
* _mcount updates data structures that represent traversals of the
* program's call graph edges. frompc and selfpc are the return
* address and function address that represents the given call graph edge.
*
* Note: the original BSD code used the same variable (frompcindex) for
* both frompcindex and frompc. Any reasonable, modern compiler will
* perform this optimization.
*/
/* _mcount; may be static, inline, etc */
_MCOUNT_DECL(uintfptr_t frompc, uintfptr_t selfpc)
{
#ifdef GUPROF
u_int delta;
#endif
fptrdiff_t frompci;
u_short *frompcindex;
struct tostruct *top, *prevtop;
struct gmonparam *p;
long toindex;
#ifdef _KERNEL
MCOUNT_DECL(s)
#endif
p = &_gmonparam;
#ifndef GUPROF /* XXX */
/*
* check that we are profiling
* and that we aren't recursively invoked.
*/
if (p->state != GMON_PROF_ON)
return;
#endif
#ifdef _KERNEL
MCOUNT_ENTER(s);
#else
if (!atomic_cmpset_acq_int(&p->state, GMON_PROF_ON, GMON_PROF_BUSY))
return;
#endif
frompci = frompc - p->lowpc;
#ifdef _KERNEL
/*
* When we are called from an exception handler, frompci may be
* for a user address. Convert such frompci's to the index of
* user() to merge all user counts.
*/
if (frompci >= p->textsize) {
if (frompci + p->lowpc
>= (uintfptr_t)(VM_MAXUSER_ADDRESS + UPAGES * PAGE_SIZE))
goto done;
frompci = (uintfptr_t)user - p->lowpc;
if (frompci >= p->textsize)
goto done;
}
#endif
#ifdef GUPROF
if (p->state != GMON_PROF_HIRES)
goto skip_guprof_stuff;
/*
* Look at the clock and add the count of clock cycles since the
* clock was last looked at to a counter for frompc. This
* solidifies the count for the function containing frompc and
* effectively starts another clock for the current function.
* The count for the new clock will be solidified when another
* function call is made or the function returns.
*
* We use the usual sampling counters since they can be located
* efficiently. 4-byte counters are usually necessary.
*
* There are many complications for subtracting the profiling
* overheads from the counts for normal functions and adding
* them to the counts for mcount(), mexitcount() and cputime().
* We attempt to handle fractional cycles, but the overheads
* are usually underestimated because they are calibrated for
* a simpler than usual setup.
*/
delta = cputime() - p->mcount_overhead;
p->cputime_overhead_resid += p->cputime_overhead_frac;
p->mcount_overhead_resid += p->mcount_overhead_frac;
if ((int)delta < 0)
*p->mcount_count += delta + p->mcount_overhead
- p->cputime_overhead;
else if (delta != 0) {
if (p->cputime_overhead_resid >= CALIB_SCALE) {
p->cputime_overhead_resid -= CALIB_SCALE;
++*p->cputime_count;
--delta;
}
if (delta != 0) {
if (p->mcount_overhead_resid >= CALIB_SCALE) {
p->mcount_overhead_resid -= CALIB_SCALE;
++*p->mcount_count;
--delta;
}
KCOUNT(p, frompci) += delta;
}
*p->mcount_count += p->mcount_overhead_sub;
}
*p->cputime_count += p->cputime_overhead;
skip_guprof_stuff:
#endif /* GUPROF */
#ifdef _KERNEL
/*
* When we are called from an exception handler, frompc is faked
* to be for where the exception occurred. We've just solidified
* the count for there. Now convert frompci to the index of btrap()
* for trap handlers and bintr() for interrupt handlers to make
* exceptions appear in the call graph as calls from btrap() and
* bintr() instead of calls from all over.
*/
if ((uintfptr_t)selfpc >= (uintfptr_t)btrap
&& (uintfptr_t)selfpc < (uintfptr_t)eintr) {
if ((uintfptr_t)selfpc >= (uintfptr_t)bintr)
frompci = (uintfptr_t)bintr - p->lowpc;
else
frompci = (uintfptr_t)btrap - p->lowpc;
}
#endif
/*
* check that frompc is a reasonable pc value.
* for example: signal catchers get called from the stack,
* not from text space. too bad.
*/
if (frompci >= p->textsize)
goto done;
frompcindex = &p->froms[frompci / (p->hashfraction * sizeof(*p->froms))];
toindex = *frompcindex;
if (toindex == 0) {
/*
* first time traversing this arc
*/
toindex = ++p->tos[0].link;
if (toindex >= p->tolimit)
/* halt further profiling */
goto overflow;
*frompcindex = toindex;
top = &p->tos[toindex];
top->selfpc = selfpc;
top->count = 1;
top->link = 0;
goto done;
}
top = &p->tos[toindex];
if (top->selfpc == selfpc) {
/*
* arc at front of chain; usual case.
*/
top->count++;
goto done;
}
/*
* have to go looking down chain for it.
* top points to what we are looking at,
* prevtop points to previous top.
* we know it is not at the head of the chain.
*/
for (; /* goto done */; ) {
if (top->link == 0) {
/*
* top is end of the chain and none of the chain
* had top->selfpc == selfpc.
* so we allocate a new tostruct
* and link it to the head of the chain.
*/
toindex = ++p->tos[0].link;
if (toindex >= p->tolimit)
goto overflow;
top = &p->tos[toindex];
top->selfpc = selfpc;
top->count = 1;
top->link = *frompcindex;
*frompcindex = toindex;
goto done;
}
/*
* otherwise, check the next arc on the chain.
*/
prevtop = top;
top = &p->tos[top->link];
if (top->selfpc == selfpc) {
/*
* there it is.
* increment its count
* move it to the head of the chain.
*/
top->count++;
toindex = prevtop->link;
prevtop->link = top->link;
top->link = *frompcindex;
*frompcindex = toindex;
goto done;
}
}
done:
#ifdef _KERNEL
MCOUNT_EXIT(s);
#else
atomic_store_rel_int(&p->state, GMON_PROF_ON);
#endif
return;
overflow:
atomic_store_rel_int(&p->state, GMON_PROF_ERROR);
#ifdef _KERNEL
MCOUNT_EXIT(s);
#endif
return;
}
/*
* Actual definition of mcount function. Defined in <machine/profile.h>,
* which is included by <sys/gmon.h>.
*/
MCOUNT
#ifdef GUPROF
void
mexitcount(uintfptr_t selfpc)
{
struct gmonparam *p;
uintfptr_t selfpcdiff;
p = &_gmonparam;
selfpcdiff = selfpc - (uintfptr_t)p->lowpc;
if (selfpcdiff < p->textsize) {
u_int delta;
/*
* Solidify the count for the current function.
*/
delta = cputime() - p->mexitcount_overhead;
p->cputime_overhead_resid += p->cputime_overhead_frac;
p->mexitcount_overhead_resid += p->mexitcount_overhead_frac;
if ((int)delta < 0)
*p->mexitcount_count += delta + p->mexitcount_overhead
- p->cputime_overhead;
else if (delta != 0) {
if (p->cputime_overhead_resid >= CALIB_SCALE) {
p->cputime_overhead_resid -= CALIB_SCALE;
++*p->cputime_count;
--delta;
}
if (delta != 0) {
if (p->mexitcount_overhead_resid
>= CALIB_SCALE) {
p->mexitcount_overhead_resid
-= CALIB_SCALE;
++*p->mexitcount_count;
--delta;
}
KCOUNT(p, selfpcdiff) += delta;
}
*p->mexitcount_count += p->mexitcount_overhead_sub;
}
*p->cputime_count += p->cputime_overhead;
}
}
#endif /* GUPROF */