mirror of
https://github.com/freebsd/freebsd-src
synced 2024-11-05 18:22:52 +00:00
8194a57215
ethernet driver. The BUGS section is still impressive, but the driver seems to work for me now. Disclaimer: i haven't been able to test this under -current so far (but it compiles, and the notebook it's intended for can now be updated to -current more easy than before). Don't be afraid of the many #ifdefs on __FreeBSD_version in the imported file; i want them in the repository on the vendor-branch so other people can also manually integrate it into older systems. I'll clean it up on the -current branch in a followup commit. The vendor-banch version right now supports systems back to 2.2R. This driver should be layered upon ppc(4), but i currently have no idea how to do this. Eventually i'll further develop the driver to also support the more modern RTL 8012 success, which seems to be present in a number of cheap pocket ethernet adapters these days. Right now, i doubt it will run with the 8012 without any changes. Finally a big Thanks! to RealTek for promptly providing me with documentation and with the source code for the 8012 pocket driver upon request. I wish all vendors were that cooperative!.
187 lines
7.5 KiB
C
187 lines
7.5 KiB
C
#ifndef IF_RDPREG_H
|
|
#define IF_RDPREG_H 1
|
|
/*
|
|
* Copyright (c) 1998 Joerg Wunsch
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: if_rdpreg.h,v 1.1.1.1 1998/12/21 12:43:35 j Exp $
|
|
*/
|
|
|
|
/*
|
|
* Part of the definitions here has been copied over from the REDP
|
|
* packet driver's REDPPD.INC file. This provides us with the same
|
|
* set of acronyms as the packet driver is using.
|
|
*
|
|
* The packet driver had no copyright, and is believed to be in the
|
|
* public domain. The author seems to be someone who calls himself
|
|
* "Chiu", so that's the only acknowledgment i can give here.
|
|
* Supposedly the author was someone from RealTek.
|
|
*/
|
|
|
|
/*
|
|
* We're hanging upon an LPT port, thus suck in the lpt defs as well.
|
|
*/
|
|
#include <i386/isa/lptreg.h>
|
|
|
|
struct rdphdr {
|
|
/* RTL8002 header that is prepended to the actual packet */
|
|
u_char unused2[2];
|
|
u_short pktlen;
|
|
u_char status; /* copy of RSR for this packet */
|
|
u_char unused3[3];
|
|
};
|
|
|
|
/*
|
|
*
|
|
* 8 Data Modes are provided:
|
|
*
|
|
* +--------+---------------+-------------+
|
|
* | Mode | Read | Write |
|
|
* +--------+---------------+-------------+
|
|
* | 0 | LptCtrl | LptData |
|
|
* +--------+---------------+-------------+
|
|
* | 1 | LptCtrl | LptCtrl |
|
|
* +--------+---------------+-------------+
|
|
* | 2 | LptCtrl*2 | LptData |
|
|
* +--------+---------------+-------------+
|
|
* | 3 | LptCtrl*2 | LptCtrl |
|
|
* +--------+---------------+-------------+
|
|
* | 4 | LptData | LptData |
|
|
* +--------+---------------+-------------+
|
|
* | 5 | LptData | LptCtrl |
|
|
* +--------+---------------+-------------+
|
|
* | 6 | LptData*2 | LptData |
|
|
* +--------+---------------+-------------+
|
|
* | 7 | LptData*2 | LptCtrl |
|
|
* +--------+---------------+-------------+
|
|
*
|
|
* Right now, this driver only implements mode 0 (which ought to work
|
|
* on any standard parallel interface).
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Page 0 of EPLC registers
|
|
*/
|
|
#define IDR0 0x00 /* Ethernet ID register (R/W) */
|
|
#define IDR1 0x01
|
|
#define IDR2 0x02
|
|
#define IDR3 0x03
|
|
#define IDR4 0x04
|
|
#define IDR5 0x05
|
|
#define TBCR0 0x06 /* transmit byte count (W), 11 bits valid */
|
|
#define TBCR1 0x07
|
|
#define TSR 0x08 /* transmit status (R), cleared upon next tx */
|
|
# define TSR_TOK 1 /* transmit OK */
|
|
# define TSR_TABT 2 /* transmit aborted (excessive collisions) */
|
|
# define TSR_COL 4 /* collision detected */
|
|
# define TSR_CDH 8 /* CD heartbeat detected */
|
|
#define RSR 0x09 /*
|
|
* receiver status (R), cleared upon next
|
|
* received packet (but stored in rx buffer
|
|
* header anyway)
|
|
*/
|
|
# define RSR_ROK 1 /* receive OK */
|
|
# define RSR_CRC 2 /* CRC error */
|
|
# define RSR_FA 4 /* frame alignment error (not multiple of 8) */
|
|
# define RSR_BUFO 0x10 /* rx buffer overflow, packet discarded */
|
|
# define RSR_PUN 0x20 /* packet count underflow (jump command issued
|
|
* but rx buffer was empty) */
|
|
# define RSR_POV 0x40 /* packet count overflow (more than 254 (?)
|
|
* packets still in buffer) */
|
|
#define ISR 0x0A /* interrupt status register (R), writing
|
|
* clears the written bits */
|
|
# define ISR_TOK 1 /* transmission OK (~ TSR_TOK) */
|
|
# define ISR_TER 2 /* transmitter error (~ TSR_TABT) */
|
|
# define ISR_ROK 4 /* receive OK (~ RSR_ROK) */
|
|
# define ISR_RER 8 /* receiver error (~ RSR_CRC|RSR_FA) */
|
|
# define ISR_RBER 0x10 /* rx buffer overflow (POV|PUN|BUFO) */
|
|
#define IMR 0x0B /* interrupt mask register (R/W), bit as ISR */
|
|
#define CMR1 0x0C /* command register 1 (R/W) */
|
|
# define CMR1_BUFE 1 /* (R) rx buffer empty */
|
|
# define CMR1_IRQ 2 /* (R) interrupt request */
|
|
# define CMR1_TRA 4 /* (R) transmission in progress */
|
|
/* (W) transmit start */
|
|
# define CMR1_TE 0x10 /* (R/W) transmitter enable */
|
|
# define CMR1_RE 0x20 /* (R/W) receiver enable */
|
|
# define CMR1_RST 0x40 /* (R/W) reset; sticks until reset completed */
|
|
# define CMR1_RDPAC 1 /* (W) `rx jump packet', prepare for reading
|
|
* next packet from ring buffer */
|
|
# define CMR1_WRPAC 2 /* (W) `tx jump packet', packet in tx buffer
|
|
* is complete and can be sent */
|
|
# define CMR1_RETX 8 /* (W) retransmit (must be accomp'ed by TRA) */
|
|
# define CMR1_MUX 0x80 /* (W) RTL8012: tell the printer MUX to
|
|
* connect the output pins to the host */
|
|
#define CMR2 0x0D /* command register 2 (R/W) */
|
|
# define CMR2_IRQOUT 1 /* interrupt signal output enabled */
|
|
# define CMR2_RAMTST 2 /* enable RAM test */
|
|
# define CMR2_PAGE 4 /* select register page #1 */
|
|
# define CMR2_IRQINV 8 /* make active IRQ `low' */
|
|
# define CMR2_AMbits 0x30 /* address mode bits: */
|
|
# define CMR2_AM_NONE 0x00 /* 0: accept nothing */
|
|
# define CMR2_AM_PHYS 0x10 /* 1: only physical addr */
|
|
# define CMR2_AM_PB 0x20 /* 2: phys + broadcast */
|
|
# define CMR2_AM_ALL 0x30 /* 3: promiscuous */
|
|
# define CMR2_LBK 0x40 /* enable loopback */
|
|
# define CMR2_SER 0x80 /* save error packet */
|
|
#define MAR 0x0E /* memory access register (?), used for
|
|
* remote DMA to the 8002's buffer */
|
|
#define PNR TBCR0 /* received packet number (R) */
|
|
#define COLR TBCR1 /* collision count (R) (4 bit valid) */
|
|
|
|
/*
|
|
* Page 1 of EPLC registers -- EEPROM control
|
|
*/
|
|
#define PCMR TBCR0 /* port command register */
|
|
/* bits for 93C46 control -- add HNib */
|
|
#define PCMR_SK 0x04 /* serial clock for EEPROM */
|
|
#define PCMR_CS 0x02 /* chip select for EEPROM */
|
|
#define PCMR_DO 0x01 /* DI to EEPROM */
|
|
|
|
/* EEPROM data, nibbles for 74S288, bits for 93C46 */
|
|
#define PDR TBCR1 /* DO from EEPROM, only bit 0 valid for
|
|
* serial EEPROM */
|
|
|
|
/*
|
|
* The following definitionss define remote DMA command through LptCtrl
|
|
*/
|
|
#define ATFD 3 /* ATFD bit in Lpt's Control register */
|
|
/* -> ATFD bit is added for Xircom's MUX */
|
|
#define Ctrl_LNibRead (0x08+ATFD) /* specify low nibble */
|
|
#define Ctrl_HNibRead (0+ATFD) /* specify high nibble */
|
|
#define Ctrl_SelData (0x04+ATFD) /* not through LptCtrl but through */
|
|
/* LptData */
|
|
#define Ctrl_IRQEN 0x10 /* set IRQEN of lpt control register */
|
|
|
|
/* Here define constants to construct the required read/write commands */
|
|
#define WrAddr 0x40 /* set address of EPLC write register */
|
|
#define RdAddr 0x0C0 /* set address of EPLC read register */
|
|
#define EOR 0x20 /* ORed to make 'end of read',set CSB=1 */
|
|
#define EOW 0x0E0 /* end of write, R/WB=A/DB=CSB=1 */
|
|
#define EOC 0x0E0 /* End Of r/w Command, R/WB=A/DB=CSB=1 */
|
|
#define HNib 0x10
|
|
|
|
#define MkHi(value) (((value) >> 4) | HNib)
|
|
|
|
#endif /* IF_RDPREG_H */
|