freebsd-src/usr.sbin/setkey/sample.cf
Hajimu UMEMOTO cf43a05493 - do hexdump on send. set length field properly
- check for encryption/authentication key together with algorithm.
- warned if a deprecated encryption algorithm (that includes "simple")
  is specified.
- changed the syntax how to define a policy of a ICMPv6 type and/or a
  code, like spdadd ::/0 ::/0 icmp6 134,0 -P out none;
- random cleanup in parser.
- use yyfatal, or return -1 after yyerror.
- deal with strdup() failure.
- permit scope notation in policy string (-P
  esp/tunnel/foo%scope-bar%scope/use)
- simplify /prefix and [port].
- g/c some unused symbols.

Obtained from:	KAME
2003-11-05 09:47:54 +00:00

220 lines
8.8 KiB
CFEngine3

# Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. Neither the name of the project nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
# There are sample scripts for IPsec configuration by manual keying.
# A security association is uniquely identified by a triple consisting
# of a Security Parameter Index (SPI), an IP Destination Address, and a
# security protocol (AH or ESP) identifier. You must take care of these
# parameters when you configure by manual keying.
# ESP transport mode is recommended for TCP port number 110 between
# Host-A and Host-B. Encryption algorithm is blowfish-cbc whose key
# is "kamekame", and authentication algorithm is hmac-sha1 whose key
# is "this is the test key".
#
# ============ ESP ============
# | |
# Host-A Host-B
# fec0::10 -------------------- fec0::11
#
# At Host-A and Host-B,
spdadd fec0::10[any] fec0::11[110] tcp -P out ipsec
esp/transport//use ;
spdadd fec0::11[110] fec0::10[any] tcp -P in ipsec
esp/transport//use ;
add fec0::10 fec0::11 esp 0x10001
-m transport
-E blowfish-cbc "kamekame"
-A hmac-sha1 "this is the test key" ;
add fec0::11 fec0::10 esp 0x10002
-m transport
-E blowfish-cbc "kamekame"
-A hmac-sha1 "this is the test key" ;
# "[any]" is wildcard of port number. Note that "[0]" is the number of
# zero in port number.
# Security protocol is old AH tunnel mode, i.e. RFC1826, with keyed-md5
# whose key is "this is the test" as authentication algorithm.
# That protocol takes place between Gateway-A and Gateway-B.
#
# ======= AH =======
# | |
# Network-A Gateway-A Gateway-B Network-B
# 10.0.1.0/24 ---- 172.16.0.1 ----- 172.16.0.2 ---- 10.0.2.0/24
#
# At Gateway-A:
spdadd 10.0.1.0/24 10.0.2.0/24 any -P out ipsec
ah/tunnel/172.16.0.1-172.16.0.2/require ;
spdadd 10.0.2.0/24 10.0.1.0/24 any -P in ipsec
ah/tunnel/172.16.0.2-172.16.0.1/require ;
add 172.16.0.1 172.16.0.2 ah-old 0x10003
-m any
-A keyed-md5 "this is the test" ;
add 172.16.0.2 172.16.0.1 ah-old 0x10004
-m any
-A keyed-md5 "this is the test" ;
# If port number field is omitted such above then "[any]" is employed.
# -m specifies the mode of SA to be used. "-m any" means wildcard of
# mode of security protocol. You can use this SAs for both tunnel and
# transport mode.
# At Gateway-B. Attention to the selector and peer's IP address for tunnel.
spdadd 10.0.2.0/24 10.0.1.0/24 any -P out ipsec
ah/tunnel/172.16.0.2-172.16.0.1/require ;
spdadd 10.0.1.0/24 10.0.2.0/24 any -P in ipsec
ah/tunnel/172.16.0.1-172.16.0.2/require ;
add 172.16.0.1 172.16.0.2 ah-old 0x10003
-m tunnel
-A keyed-md5 "this is the test" ;
add 172.16.0.2 172.16.0.1 ah-old 0x10004
-m tunnel
-A keyed-md5 "this is the test" ;
# AH transport mode followed by ESP tunnel mode is required between
# Gateway-A and Gateway-B.
# Encryption algorithm is 3des-cbc, and authentication algorithm for ESP
# is hmac-sha1. Authentication algorithm for AH is hmac-md5.
#
# ========== AH =========
# | ======= ESP ===== |
# | | | |
# Network-A Gateway-A Gateway-B Network-B
# fec0:0:0:1::/64 --- fec0:0:0:1::1 ---- fec0:0:0:2::1 --- fec0:0:0:2::/64
#
# At Gateway-A:
spdadd fec0:0:0:1::/64 fec0:0:0:2::/64 any -P out ipsec
esp/tunnel/fec0:0:0:1::1-fec0:0:0:2::1/require
ah/transport//require ;
spdadd fec0:0:0:2::/64 fec0:0:0:1::/64 any -P in ipsec
esp/tunnel/fec0:0:0:2::1-fec0:0:0:1::1/require
ah/transport//require ;
add fec0:0:0:1::1 fec0:0:0:2::1 esp 0x10001
-m tunnel
-E 3des-cbc "kamekame12341234kame1234"
-A hmac-sha1 "this is the test key" ;
add fec0:0:0:1::1 fec0:0:0:2::1 ah 0x10001
-m transport
-A hmac-md5 "this is the test" ;
add fec0:0:0:2::1 fec0:0:0:1::1 esp 0x10001
-m tunnel
-E 3des-cbc "kamekame12341234kame1234"
-A hmac-sha1 "this is the test key" ;
add fec0:0:0:2::1 fec0:0:0:1::1 ah 0x10001
-m transport
-A hmac-md5 "this is the test" ;
# ESP tunnel mode is required between Host-A and Gateway-A.
# Encryption algorithm is cast128-cbc, and authentication algorithm
# for ESP is hmac-sha1.
# ESP transport mode is recommended between Host-A and Host-B.
# Encryption algorithm is rc5-cbc, and authentication algorithm
# for ESP is hmac-md5.
#
# ================== ESP =================
# | ======= ESP ======= |
# | | | |
# Host-A Gateway-A Host-B
# fec0:0:0:1::1 ---- fec0:0:0:2::1 ---- fec0:0:0:2::2
#
# At Host-A:
spdadd fec0:0:0:1::1[any] fec0:0:0:2::2[80] tcp -P out ipsec
esp/transport//use
esp/tunnel/fec0:0:0:1::1-fec0:0:0:2::1/require ;
spdadd fec0:0:0:2::1[80] fec0:0:0:1::1[any] tcp -P in ipsec
esp/transport//use
esp/tunnel/fec0:0:0:2::1-fec0:0:0:1::1/require ;
add fec0:0:0:1::1 fec0:0:0:2::2 esp 0x10001
-m transport
-E cast128-cbc "12341234"
-A hmac-sha1 "this is the test key" ;
add fec0:0:0:1::1 fec0:0:0:2::1 esp 0x10002
-E rc5-cbc "kamekame"
-A hmac-md5 "this is the test" ;
add fec0:0:0:2::2 fec0:0:0:1::1 esp 0x10003
-m transport
-E cast128-cbc "12341234"
-A hmac-sha1 "this is the test key" ;
add fec0:0:0:2::1 fec0:0:0:1::1 esp 0x10004
-E rc5-cbc "kamekame"
-A hmac-md5 "this is the test" ;
# By "get" command, you can get a entry of either SP or SA.
get fec0:0:0:1::1 fec0:0:0:2::2 ah 0x10004 ;
# Also delete command, you can delete a entry of either SP or SA.
spddelete fec0:0:0:1::/64 fec0:0:0:2::/64 any -P out;
delete fec0:0:0:1::1 fec0:0:0:2::2 ah 0x10004 ;
# By dump command, you can dump all entry of either SP or SA.
dump ;
spddump ;
dump esp ;
flush esp ;
# By flush command, you can flush all entry of either SP or SA.
flush ;
spdflush ;
# "flush" and "dump" commands can specify a security protocol.
dump esp ;
flush ah ;
# XXX
add ::1 ::1 esp 10001 -m transport -E null ;
add ::1 ::1 esp 10002 -m transport -E des-deriv "12341234" ;
add ::1 ::1 esp-old 10003 -m transport -E des-32iv "12341234" ;
add ::1 ::1 esp 10004 -m transport -E null -A null ;
add ::1 ::1 esp 10005 -m transport -E null -A hmac-md5 "1234123412341234" ;
add ::1 ::1 esp 10006 -m tunnel -E null -A hmac-sha1 "12341234123412341234" ;
add ::1 ::1 esp 10007 -m transport -E null -A keyed-md5 "1234123412341234" ;
add ::1 ::1 esp 10008 -m any -E null -A keyed-sha1 "12341234123412341234" ;
add ::1 ::1 esp 10009 -m transport -E des-cbc "testtest" ;
add ::1 ::1 esp 10010 -m transport -E 3des-cbc "testtest12341234testtest" ;
add ::1 ::1 esp 10011 -m tunnel -E cast128-cbc "testtest1234" ;
add ::1 ::1 esp 10012 -m tunnel -E blowfish-cbc "testtest1234" ;
add ::1 ::1 esp 10013 -m tunnel -E rc5-cbc "testtest1234" ;
add ::1 ::1 esp 10014 -m any -E rc5-cbc "testtest1234" ;
add ::1 ::1 esp 10015 -m transport -f zero-pad -E null ;
add ::1 ::1 esp 10016 -m tunnel -f random-pad -r 8 -lh 100 -ls 80 -E null ;
add ::1 ::1 esp 10017 -m transport -f seq-pad -f nocyclic-seq -E null ;
add ::1 ::1 esp 10018 -m transport -E null ;
#add ::1 ::1 ah 20000 -m transport -A null ;
add ::1 ::1 ah 20001 -m any -A hmac-md5 "1234123412341234";
add ::1 ::1 ah 20002 -m tunnel -A hmac-sha1 "12341234123412341234";
add ::1 ::1 ah 20003 -m transport -A keyed-md5 "1234123412341234";
add ::1 ::1 ah-old 20004 -m transport -A keyed-md5 "1234123412341234";
add ::1 ::1 ah 20005 -m transport -A keyed-sha1 "12341234123412341234";
#add ::1 ::1 ipcomp 30000 -C oui ;
add ::1 ::1 ipcomp 30001 -C deflate ;
#add ::1 ::1 ipcomp 30002 -C lzs ;
# enjoy.