freebsd-src/sys/netipx/spx.h
Robert Watson c28aedefd8 Rework SPX segment reassembly, which was originally based on our TCP
reassembly but failed to be modernized over time:

- Use queue(9).
- Specifically allocate queue entries of type M_SPXREASSQ to point at
  member mbufs, rather than casting mbuf data to 'spx_q'.
- Maintain the mbuf pointer as part of the queue entry so that we can
  later free the mbuf without using dtom().
2009-06-20 18:24:25 +00:00

211 lines
8.4 KiB
C

/*-
* Copyright (c) 1984, 1985, 1986, 1987, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Copyright (c) 1995, Mike Mitchell
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)spx.h
*
* $FreeBSD$
*/
#ifndef _NETIPX_SPX_H_
#define _NETIPX_SPX_H_
/*
* Definitions for IPX style Sequenced Packet Protocol
*/
struct spxhdr {
u_char spx_cc; /* connection control */
u_char spx_dt; /* datastream type */
#define SPX_SP 0x80 /* system packet */
#define SPX_SA 0x40 /* send acknowledgement */
#define SPX_OB 0x20 /* attention (out of band data) */
#define SPX_EM 0x10 /* end of message */
u_short spx_sid; /* source connection identifier */
u_short spx_did; /* destination connection identifier */
u_short spx_seq; /* sequence number */
u_short spx_ack; /* acknowledge number */
u_short spx_alo; /* allocation number */
} __packed;
/*
* Definitions for NS(tm) Internet Datagram Protocol
* containing a Sequenced Packet Protocol packet.
*/
struct spx {
struct ipx si_i;
struct spxhdr si_s;
} __packed;
struct spx_q {
struct mbuf *sq_msi;
struct spx *sq_si;
LIST_ENTRY(spx_q) sq_entry;
};
#define SI(x) ((struct spx *)x)
#define si_sum si_i.ipx_sum
#define si_len si_i.ipx_len
#define si_tc si_i.ipx_tc
#define si_pt si_i.ipx_pt
#define si_dna si_i.ipx_dna
#define si_sna si_i.ipx_sna
#define si_sport si_i.ipx_sna.x_port
#define si_cc si_s.spx_cc
#define si_dt si_s.spx_dt
#define si_sid si_s.spx_sid
#define si_did si_s.spx_did
#define si_seq si_s.spx_seq
#define si_ack si_s.spx_ack
#define si_alo si_s.spx_alo
/*
* SPX control block, one per connection
*/
struct spxpcb {
LIST_HEAD(, spx_q) s_q; /* queue for out-of-order receipt */
struct ipxpcb *s_ipxpcb; /* backpointer to internet pcb */
u_char s_state;
u_char s_flags;
#define SF_ACKNOW 0x01 /* Ack peer immediately */
#define SF_DELACK 0x02 /* Ack, but try to delay it */
#define SF_HI 0x04 /* Show headers on input */
#define SF_HO 0x08 /* Show headers on output */
#define SF_PI 0x10 /* Packet (datagram) interface */
#define SF_WIN 0x20 /* Window info changed */
#define SF_RXT 0x40 /* Rxt info changed */
#define SF_RVD 0x80 /* Calling from read usrreq routine */
u_short s_mtu; /* Max packet size for this stream */
/* use sequence fields in headers to store sequence numbers for this
connection */
struct ipx s_ipx;
struct spxhdr s_shdr; /* prototype header to transmit */
#define s_cc s_shdr.spx_cc /* connection control (for EM bit) */
#define s_dt s_shdr.spx_dt /* datastream type */
#define s_sid s_shdr.spx_sid /* source connection identifier */
#define s_did s_shdr.spx_did /* destination connection identifier */
#define s_seq s_shdr.spx_seq /* sequence number */
#define s_ack s_shdr.spx_ack /* acknowledge number */
#define s_alo s_shdr.spx_alo /* allocation number */
#define s_dport s_ipx.ipx_dna.x_port /* where we are sending */
struct spxhdr s_rhdr; /* last received header (in effect!)*/
u_short s_rack; /* their acknowledge number */
u_short s_ralo; /* their allocation number */
u_short s_smax; /* highest packet # we have sent */
u_short s_snxt; /* which packet to send next */
/* congestion control */
#define CUNIT 1024 /* scaling for ... */
int s_cwnd; /* Congestion-controlled window */
/* in packets * CUNIT */
short s_swnd; /* == tcp snd_wnd, in packets */
short s_smxw; /* == tcp max_sndwnd */
/* difference of two spx_seq's can be
no bigger than a short */
u_short s_swl1; /* == tcp snd_wl1 */
u_short s_swl2; /* == tcp snd_wl2 */
int s_cwmx; /* max allowable cwnd */
int s_ssthresh; /* s_cwnd size threshold for
* slow start exponential-to-
* linear switch */
/* transmit timing stuff
* srtt and rttvar are stored as fixed point, for convenience in smoothing.
* srtt has 3 bits to the right of the binary point, rttvar has 2.
*/
short s_idle; /* time idle */
#define SPXT_NTIMERS 4
short s_timer[SPXT_NTIMERS]; /* timers */
short s_rxtshift; /* log(2) of rexmt exp. backoff */
short s_rxtcur; /* current retransmit value */
u_short s_rtseq; /* packet being timed */
short s_rtt; /* timer for round trips */
short s_srtt; /* averaged timer */
short s_rttvar; /* variance in round trip time */
char s_force; /* which timer expired */
char s_dupacks; /* counter to intuit xmt loss */
/* out of band data */
char s_oobflags;
#define SF_SOOB 0x08 /* sending out of band data */
#define SF_IOOB 0x10 /* receiving out of band data */
char s_iobc; /* input characters */
/* debug stuff */
u_short s_want; /* Last candidate for sending */
char s_outx; /* exit taken from spx_output */
char s_inx; /* exit taken from spx_input */
u_short s_flags2; /* more flags for testing */
#define SF_NEWCALL 0x100 /* for new_recvmsg */
#define SO_NEWCALL 10 /* for new_recvmsg */
};
#define ipxtospxpcb(np) ((struct spxpcb *)(np)->ipxp_pcb)
#define sotospxpcb(so) (ipxtospxpcb(sotoipxpcb(so)))
#ifdef _KERNEL
extern struct pr_usrreqs spx_usrreqs;
extern struct pr_usrreqs spx_usrreq_sps;
void spx_ctlinput(int cmd, struct sockaddr *arg_as_sa, void *dummy);
int spx_ctloutput(struct socket *so, struct sockopt *sopt);
void spx_fasttimo(void);
void spx_init(void);
void spx_input(struct mbuf *m, struct ipxpcb *ipxp);
void spx_slowtimo(void);
#endif /* _KERNEL */
#endif /* !_NETIPX_SPX_H_ */