Adrian Chadd a91ab3c099 Some TX dmamap cleanups. ... * Don't use BUS_DMA_ALLOCNOW for descriptor DMA maps; we never use bounce buffers for the descriptors themselves. * Add some XXX's to mark where the ath_buf has its mbuf ripped from underneath it without actually cleaning up the dmamap. I haven't audited those particular code paths to see if the DMA map is guaranteed to be setup there; I'll do that later. * Print out a warning if the descdma tidyup code is given some descriptors w/ maps to free. Ideally the owner will free the mbufs and unmap the descriptors before freeing the descriptor/ath_buf pairs, but right now that's not guaranteed to be done. Reviewed by: scottl (BUS_DMA_ALLOCNOW tag)		2013-04-02 06:24:22 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Add new regulatory domain.	2013-03-24 04:42:56 +00:00
ath_rate	I give up - just throw the EWMA update into the normal update_stats()	2013-02-27 04:33:06 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath.c	Some TX dmamap cleanups.	2013-04-02 06:24:22 +00:00
if_ath_ahb.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_alq.c	Extend the timestamp to be a timeval, rather than ticks.	2013-02-11 02:48:49 +00:00
if_ath_alq.h	Fix an incorrect sizeof()	2013-02-18 18:39:15 +00:00
if_ath_beacon.c	Implement the replacement EDMA FIFO code.	2013-03-26 20:04:45 +00:00
if_ath_beacon.h	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Ensure that we only call the busdma unmap/flush routines once, when	2013-04-01 20:57:13 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx.c	Add a missing unmap; if we're freeing this mbuf then we must	2013-04-02 06:21:37 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_rx_edma.c	Only unmap the RX mbuf DMA map if there's a buffer here.	2013-04-01 20:11:19 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx.c	Ensure that we only call the busdma unmap/flush routines once, when	2013-04-01 20:57:13 +00:00
if_ath_tx.h	Add a new option to limit the maximum size of aggregates.	2013-02-21 06:18:40 +00:00
if_ath_tx_edma.c	* Stop processing after HAL_EIO; this is what the reference driver does.	2013-03-27 00:35:45 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Oops - fix an incorrect test.	2013-02-28 23:39:22 +00:00
if_ath_tx_ht.h
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Add a few new fields to the RX vendor radiotap header:	2013-03-11 06:54:58 +00:00
if_athrate.h	Add missing flags.	2013-02-28 23:39:38 +00:00
if_athvar.h	Add per-TXQ EDMA FIFO staging queue support.	2013-03-26 19:46:51 +00:00