mirror of
https://github.com/freebsd/freebsd-src
synced 2024-10-17 22:04:40 +00:00
![Søren Schmidt](/assets/img/avatar_default.png)
If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in. However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries: atacore: ATA core functionality, always needed for any ATA setup atacard: CARDBUS support atacbus: PC98 cbus support ataisa: ISA bus support atapci: PCI bus support only generic chipset support. ataahci: AHCI support, also pulled in by some vendor modules. ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets atadisk: ATA disk driver ataraid: ATA softraid driver atapicd: ATAPI cd/dvd driver atapifd: ATAPI floppy/flashdisk driver atapist: ATAPI tape driver atausb: ATA<>USB bridge atapicam: ATA<>CAM bridge This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file: device atacore device atapci device atavia And then you need the atadisk, atapicd etc lines in there just as usual. If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual. However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
680 lines
29 KiB
C
680 lines
29 KiB
C
/*-
|
|
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* ATA register defines */
|
|
#define ATA_DATA 0 /* (RW) data */
|
|
|
|
#define ATA_FEATURE 1 /* (W) feature */
|
|
#define ATA_F_DMA 0x01 /* enable DMA */
|
|
#define ATA_F_OVL 0x02 /* enable overlap */
|
|
|
|
#define ATA_COUNT 2 /* (W) sector count */
|
|
|
|
#define ATA_SECTOR 3 /* (RW) sector # */
|
|
#define ATA_CYL_LSB 4 /* (RW) cylinder# LSB */
|
|
#define ATA_CYL_MSB 5 /* (RW) cylinder# MSB */
|
|
#define ATA_DRIVE 6 /* (W) Sector/Drive/Head */
|
|
#define ATA_D_LBA 0x40 /* use LBA addressing */
|
|
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
|
|
|
|
#define ATA_COMMAND 7 /* (W) command */
|
|
|
|
#define ATA_ERROR 8 /* (R) error */
|
|
#define ATA_E_ILI 0x01 /* illegal length */
|
|
#define ATA_E_NM 0x02 /* no media */
|
|
#define ATA_E_ABORT 0x04 /* command aborted */
|
|
#define ATA_E_MCR 0x08 /* media change request */
|
|
#define ATA_E_IDNF 0x10 /* ID not found */
|
|
#define ATA_E_MC 0x20 /* media changed */
|
|
#define ATA_E_UNC 0x40 /* uncorrectable data */
|
|
#define ATA_E_ICRC 0x80 /* UDMA crc error */
|
|
#define ATA_E_ATAPI_SENSE_MASK 0xf0 /* ATAPI sense key mask */
|
|
|
|
#define ATA_IREASON 9 /* (R) interrupt reason */
|
|
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
|
|
#define ATA_I_IN 0x02 /* read (1) | write (0) */
|
|
#define ATA_I_RELEASE 0x04 /* released bus (1) */
|
|
#define ATA_I_TAGMASK 0xf8 /* tag mask */
|
|
|
|
#define ATA_STATUS 10 /* (R) status */
|
|
#define ATA_ALTSTAT 11 /* (R) alternate status */
|
|
#define ATA_S_ERROR 0x01 /* error */
|
|
#define ATA_S_INDEX 0x02 /* index */
|
|
#define ATA_S_CORR 0x04 /* data corrected */
|
|
#define ATA_S_DRQ 0x08 /* data request */
|
|
#define ATA_S_DSC 0x10 /* drive seek completed */
|
|
#define ATA_S_SERVICE 0x10 /* drive needs service */
|
|
#define ATA_S_DWF 0x20 /* drive write fault */
|
|
#define ATA_S_DMA 0x20 /* DMA ready */
|
|
#define ATA_S_READY 0x40 /* drive ready */
|
|
#define ATA_S_BUSY 0x80 /* busy */
|
|
|
|
#define ATA_CONTROL 12 /* (W) control */
|
|
|
|
#define ATA_CTLOFFSET 0x206 /* control register offset */
|
|
#define ATA_PCCARD_CTLOFFSET 0x0e /* do for PCCARD devices */
|
|
#define ATA_PC98_CTLOFFSET 0x10c /* do for PC98 devices */
|
|
#define ATA_A_IDS 0x02 /* disable interrupts */
|
|
#define ATA_A_RESET 0x04 /* RESET controller */
|
|
#define ATA_A_4BIT 0x08 /* 4 head bits */
|
|
#define ATA_A_HOB 0x80 /* High Order Byte enable */
|
|
|
|
/* SATA register defines */
|
|
#define ATA_SSTATUS 13
|
|
#define ATA_SS_DET_MASK 0x0000000f
|
|
#define ATA_SS_DET_NO_DEVICE 0x00000000
|
|
#define ATA_SS_DET_DEV_PRESENT 0x00000001
|
|
#define ATA_SS_DET_PHY_ONLINE 0x00000003
|
|
#define ATA_SS_DET_PHY_OFFLINE 0x00000004
|
|
|
|
#define ATA_SS_SPD_MASK 0x000000f0
|
|
#define ATA_SS_SPD_NO_SPEED 0x00000000
|
|
#define ATA_SS_SPD_GEN1 0x00000010
|
|
#define ATA_SS_SPD_GEN2 0x00000020
|
|
|
|
#define ATA_SS_IPM_MASK 0x00000f00
|
|
#define ATA_SS_IPM_NO_DEVICE 0x00000000
|
|
#define ATA_SS_IPM_ACTIVE 0x00000100
|
|
#define ATA_SS_IPM_PARTIAL 0x00000200
|
|
#define ATA_SS_IPM_SLUMBER 0x00000600
|
|
|
|
#define ATA_SS_CONWELL_MASK \
|
|
(ATA_SS_DET_MASK|ATA_SS_SPD_MASK|ATA_SS_IPM_MASK)
|
|
#define ATA_SS_CONWELL_GEN1 \
|
|
(ATA_SS_DET_PHY_ONLINE|ATA_SS_SPD_GEN1|ATA_SS_IPM_ACTIVE)
|
|
#define ATA_SS_CONWELL_GEN2 \
|
|
(ATA_SS_DET_PHY_ONLINE|ATA_SS_SPD_GEN2|ATA_SS_IPM_ACTIVE)
|
|
|
|
#define ATA_SERROR 14
|
|
#define ATA_SE_DATA_CORRECTED 0x00000001
|
|
#define ATA_SE_COMM_CORRECTED 0x00000002
|
|
#define ATA_SE_DATA_ERR 0x00000100
|
|
#define ATA_SE_COMM_ERR 0x00000200
|
|
#define ATA_SE_PROT_ERR 0x00000400
|
|
#define ATA_SE_HOST_ERR 0x00000800
|
|
#define ATA_SE_PHY_CHANGED 0x00010000
|
|
#define ATA_SE_PHY_IERROR 0x00020000
|
|
#define ATA_SE_COMM_WAKE 0x00040000
|
|
#define ATA_SE_DECODE_ERR 0x00080000
|
|
#define ATA_SE_PARITY_ERR 0x00100000
|
|
#define ATA_SE_CRC_ERR 0x00200000
|
|
#define ATA_SE_HANDSHAKE_ERR 0x00400000
|
|
#define ATA_SE_LINKSEQ_ERR 0x00800000
|
|
#define ATA_SE_TRANSPORT_ERR 0x01000000
|
|
#define ATA_SE_UNKNOWN_FIS 0x02000000
|
|
|
|
#define ATA_SCONTROL 15
|
|
#define ATA_SC_DET_MASK 0x0000000f
|
|
#define ATA_SC_DET_IDLE 0x00000000
|
|
#define ATA_SC_DET_RESET 0x00000001
|
|
#define ATA_SC_DET_DISABLE 0x00000004
|
|
|
|
#define ATA_SC_SPD_MASK 0x000000f0
|
|
#define ATA_SC_SPD_NO_SPEED 0x00000000
|
|
#define ATA_SC_SPD_SPEED_GEN1 0x00000010
|
|
#define ATA_SC_SPD_SPEED_GEN2 0x00000020
|
|
|
|
#define ATA_SC_IPM_MASK 0x00000f00
|
|
#define ATA_SC_IPM_NONE 0x00000000
|
|
#define ATA_SC_IPM_DIS_PARTIAL 0x00000100
|
|
#define ATA_SC_IPM_DIS_SLUMBER 0x00000200
|
|
|
|
#define ATA_SACTIVE 16
|
|
|
|
/* SATA AHCI v1.0 register defines */
|
|
#define ATA_AHCI_CAP 0x00
|
|
#define ATA_AHCI_NPMASK 0x1f
|
|
#define ATA_AHCI_CAP_SPM 0x00020000
|
|
#define ATA_AHCI_CAP_CLO 0x01000000
|
|
#define ATA_AHCI_CAP_64BIT 0x80000000
|
|
|
|
#define ATA_AHCI_GHC 0x04
|
|
#define ATA_AHCI_GHC_AE 0x80000000
|
|
#define ATA_AHCI_GHC_IE 0x00000002
|
|
#define ATA_AHCI_GHC_HR 0x00000001
|
|
|
|
#define ATA_AHCI_IS 0x08
|
|
#define ATA_AHCI_PI 0x0c
|
|
#define ATA_AHCI_VS 0x10
|
|
|
|
#define ATA_AHCI_OFFSET 0x80
|
|
|
|
#define ATA_AHCI_P_CLB 0x100
|
|
#define ATA_AHCI_P_CLBU 0x104
|
|
#define ATA_AHCI_P_FB 0x108
|
|
#define ATA_AHCI_P_FBU 0x10c
|
|
#define ATA_AHCI_P_IS 0x110
|
|
#define ATA_AHCI_P_IE 0x114
|
|
#define ATA_AHCI_P_IX_DHR 0x00000001
|
|
#define ATA_AHCI_P_IX_PS 0x00000002
|
|
#define ATA_AHCI_P_IX_DS 0x00000004
|
|
#define ATA_AHCI_P_IX_SDB 0x00000008
|
|
#define ATA_AHCI_P_IX_UF 0x00000010
|
|
#define ATA_AHCI_P_IX_DP 0x00000020
|
|
#define ATA_AHCI_P_IX_PC 0x00000040
|
|
#define ATA_AHCI_P_IX_DI 0x00000080
|
|
|
|
#define ATA_AHCI_P_IX_PRC 0x00400000
|
|
#define ATA_AHCI_P_IX_IPM 0x00800000
|
|
#define ATA_AHCI_P_IX_OF 0x01000000
|
|
#define ATA_AHCI_P_IX_INF 0x04000000
|
|
#define ATA_AHCI_P_IX_IF 0x08000000
|
|
#define ATA_AHCI_P_IX_HBD 0x10000000
|
|
#define ATA_AHCI_P_IX_HBF 0x20000000
|
|
#define ATA_AHCI_P_IX_TFE 0x40000000
|
|
#define ATA_AHCI_P_IX_CPD 0x80000000
|
|
|
|
#define ATA_AHCI_P_CMD 0x118
|
|
#define ATA_AHCI_P_CMD_ST 0x00000001
|
|
#define ATA_AHCI_P_CMD_SUD 0x00000002
|
|
#define ATA_AHCI_P_CMD_POD 0x00000004
|
|
#define ATA_AHCI_P_CMD_CLO 0x00000008
|
|
#define ATA_AHCI_P_CMD_FRE 0x00000010
|
|
#define ATA_AHCI_P_CMD_CCS_MASK 0x00001f00
|
|
#define ATA_AHCI_P_CMD_ISS 0x00002000
|
|
#define ATA_AHCI_P_CMD_FR 0x00004000
|
|
#define ATA_AHCI_P_CMD_CR 0x00008000
|
|
#define ATA_AHCI_P_CMD_CPS 0x00010000
|
|
#define ATA_AHCI_P_CMD_PMA 0x00020000
|
|
#define ATA_AHCI_P_CMD_HPCP 0x00040000
|
|
#define ATA_AHCI_P_CMD_ISP 0x00080000
|
|
#define ATA_AHCI_P_CMD_CPD 0x00100000
|
|
#define ATA_AHCI_P_CMD_ATAPI 0x01000000
|
|
#define ATA_AHCI_P_CMD_DLAE 0x02000000
|
|
#define ATA_AHCI_P_CMD_ALPE 0x04000000
|
|
#define ATA_AHCI_P_CMD_ASP 0x08000000
|
|
#define ATA_AHCI_P_CMD_ICC_MASK 0xf0000000
|
|
#define ATA_AHCI_P_CMD_NOOP 0x00000000
|
|
#define ATA_AHCI_P_CMD_ACTIVE 0x10000000
|
|
#define ATA_AHCI_P_CMD_PARTIAL 0x20000000
|
|
#define ATA_AHCI_P_CMD_SLUMPER 0x60000000
|
|
|
|
#define ATA_AHCI_P_TFD 0x120
|
|
#define ATA_AHCI_P_SIG 0x124
|
|
#define ATA_AHCI_P_SSTS 0x128
|
|
#define ATA_AHCI_P_SCTL 0x12c
|
|
#define ATA_AHCI_P_SERR 0x130
|
|
#define ATA_AHCI_P_SACT 0x134
|
|
#define ATA_AHCI_P_CI 0x138
|
|
#define ATA_AHCI_P_SNTF 0x13C
|
|
#define ATA_AHCI_P_FBS 0x140
|
|
|
|
#define ATA_AHCI_CL_SIZE 32
|
|
#define ATA_AHCI_CL_OFFSET 0
|
|
#define ATA_AHCI_FB_OFFSET (ATA_AHCI_CL_SIZE * 32)
|
|
#define ATA_AHCI_CT_OFFSET (ATA_AHCI_FB_OFFSET + 4096)
|
|
#define ATA_AHCI_CT_SIZE (1024 + 128)
|
|
|
|
struct ata_ahci_dma_prd {
|
|
u_int64_t dba;
|
|
u_int32_t reserved;
|
|
u_int32_t dbc; /* 0 based */
|
|
#define ATA_AHCI_PRD_MASK 0x003fffff /* max 4MB */
|
|
#define ATA_AHCI_PRD_IPC (1<<31)
|
|
} __packed;
|
|
|
|
struct ata_ahci_cmd_tab {
|
|
u_int8_t cfis[64];
|
|
u_int8_t acmd[32];
|
|
u_int8_t reserved[32];
|
|
#define ATA_AHCI_DMA_ENTRIES 64
|
|
struct ata_ahci_dma_prd prd_tab[ATA_AHCI_DMA_ENTRIES];
|
|
} __packed;
|
|
|
|
struct ata_ahci_cmd_list {
|
|
u_int16_t cmd_flags;
|
|
#define ATA_AHCI_CMD_ATAPI 0x0020
|
|
#define ATA_AHCI_CMD_WRITE 0x0040
|
|
#define ATA_AHCI_CMD_PREFETCH 0x0080
|
|
#define ATA_AHCI_CMD_RESET 0x0100
|
|
#define ATA_AHCI_CMD_BIST 0x0200
|
|
#define ATA_AHCI_CMD_CLR_BUSY 0x0400
|
|
|
|
u_int16_t prd_length; /* PRD entries */
|
|
u_int32_t bytecount;
|
|
u_int64_t cmd_table_phys; /* 128byte aligned */
|
|
} __packed;
|
|
|
|
|
|
/* DMA register defines */
|
|
#define ATA_DMA_ENTRIES 256
|
|
#define ATA_DMA_EOT 0x80000000
|
|
|
|
#define ATA_BMCMD_PORT 17
|
|
#define ATA_BMCMD_START_STOP 0x01
|
|
#define ATA_BMCMD_WRITE_READ 0x08
|
|
|
|
#define ATA_BMDEVSPEC_0 18
|
|
#define ATA_BMSTAT_PORT 19
|
|
#define ATA_BMSTAT_ACTIVE 0x01
|
|
#define ATA_BMSTAT_ERROR 0x02
|
|
#define ATA_BMSTAT_INTERRUPT 0x04
|
|
#define ATA_BMSTAT_MASK 0x07
|
|
#define ATA_BMSTAT_DMA_MASTER 0x20
|
|
#define ATA_BMSTAT_DMA_SLAVE 0x40
|
|
#define ATA_BMSTAT_DMA_SIMPLEX 0x80
|
|
|
|
#define ATA_BMDEVSPEC_1 20
|
|
#define ATA_BMDTP_PORT 21
|
|
|
|
#define ATA_IDX_ADDR 22
|
|
#define ATA_IDX_DATA 23
|
|
#define ATA_MAX_RES 24
|
|
|
|
/* misc defines */
|
|
#define ATA_PRIMARY 0x1f0
|
|
#define ATA_SECONDARY 0x170
|
|
#define ATA_PC98_BANK 0x432
|
|
#define ATA_IOSIZE 0x08
|
|
#define ATA_PC98_IOSIZE 0x10
|
|
#define ATA_CTLIOSIZE 0x01
|
|
#define ATA_BMIOSIZE 0x08
|
|
#define ATA_PC98_BANKIOSIZE 0x01
|
|
#define ATA_IOADDR_RID 0
|
|
#define ATA_CTLADDR_RID 1
|
|
#define ATA_BMADDR_RID 0x20
|
|
#define ATA_PC98_CTLADDR_RID 8
|
|
#define ATA_PC98_BANKADDR_RID 9
|
|
#define ATA_IRQ_RID 0
|
|
#define ATA_DEV(unit) ((unit > 0) ? 0x10 : 0)
|
|
#define ATA_CFA_MAGIC1 0x844A
|
|
#define ATA_CFA_MAGIC2 0x848A
|
|
#define ATA_CFA_MAGIC3 0x8400
|
|
#define ATAPI_MAGIC_LSB 0x14
|
|
#define ATAPI_MAGIC_MSB 0xeb
|
|
#define ATAPI_P_READ (ATA_S_DRQ | ATA_I_IN)
|
|
#define ATAPI_P_WRITE (ATA_S_DRQ)
|
|
#define ATAPI_P_CMDOUT (ATA_S_DRQ | ATA_I_CMD)
|
|
#define ATAPI_P_DONEDRQ (ATA_S_DRQ | ATA_I_CMD | ATA_I_IN)
|
|
#define ATAPI_P_DONE (ATA_I_CMD | ATA_I_IN)
|
|
#define ATAPI_P_ABORT 0
|
|
#define ATA_INTR_FLAGS (INTR_MPSAFE|INTR_TYPE_BIO|INTR_ENTROPY)
|
|
#define ATA_OP_CONTINUES 0
|
|
#define ATA_OP_FINISHED 1
|
|
#define ATA_MAX_28BIT_LBA 268435455UL
|
|
|
|
/* structure used for composite atomic operations */
|
|
#define MAX_COMPOSITES 32 /* u_int32_t bits */
|
|
struct ata_composite {
|
|
struct mtx lock; /* control lock */
|
|
u_int32_t rd_needed; /* needed read subdisks */
|
|
u_int32_t rd_done; /* done read subdisks */
|
|
u_int32_t wr_needed; /* needed write subdisks */
|
|
u_int32_t wr_depend; /* write depends on subdisks */
|
|
u_int32_t wr_done; /* done write subdisks */
|
|
struct ata_request *request[MAX_COMPOSITES];
|
|
u_int32_t residual; /* bytes still to transfer */
|
|
caddr_t data_1;
|
|
caddr_t data_2;
|
|
};
|
|
|
|
/* structure used to queue an ATA/ATAPI request */
|
|
struct ata_request {
|
|
device_t dev; /* device handle */
|
|
device_t parent; /* channel handle */
|
|
union {
|
|
struct {
|
|
u_int8_t command; /* command reg */
|
|
u_int16_t feature; /* feature reg */
|
|
u_int16_t count; /* count reg */
|
|
u_int64_t lba; /* lba reg */
|
|
} ata;
|
|
struct {
|
|
u_int8_t ccb[16]; /* ATAPI command block */
|
|
struct atapi_sense sense; /* ATAPI request sense data */
|
|
u_int8_t saved_cmd; /* ATAPI saved command */
|
|
} atapi;
|
|
} u;
|
|
u_int32_t bytecount; /* bytes to transfer */
|
|
u_int32_t transfersize; /* bytes pr transfer */
|
|
caddr_t data; /* pointer to data buf */
|
|
u_int32_t tag; /* HW tag of this request */
|
|
int flags;
|
|
#define ATA_R_CONTROL 0x00000001
|
|
#define ATA_R_READ 0x00000002
|
|
#define ATA_R_WRITE 0x00000004
|
|
#define ATA_R_ATAPI 0x00000008
|
|
#define ATA_R_DMA 0x00000010
|
|
#define ATA_R_QUIET 0x00000020
|
|
#define ATA_R_TIMEOUT 0x00000040
|
|
|
|
#define ATA_R_ORDERED 0x00000100
|
|
#define ATA_R_AT_HEAD 0x00000200
|
|
#define ATA_R_REQUEUE 0x00000400
|
|
#define ATA_R_THREAD 0x00000800
|
|
#define ATA_R_DIRECT 0x00001000
|
|
|
|
#define ATA_R_DEBUG 0x10000000
|
|
#define ATA_R_DANGER1 0x20000000
|
|
#define ATA_R_DANGER2 0x40000000
|
|
|
|
struct ata_dmaslot *dma; /* DMA slot of this request */
|
|
u_int8_t status; /* ATA status */
|
|
u_int8_t error; /* ATA error */
|
|
u_int32_t donecount; /* bytes transferred */
|
|
int result; /* result error code */
|
|
void (*callback)(struct ata_request *request);
|
|
struct sema done; /* request done sema */
|
|
int retries; /* retry count */
|
|
int timeout; /* timeout for this cmd */
|
|
struct callout callout; /* callout management */
|
|
struct task task; /* task management */
|
|
struct bio *bio; /* bio for this request */
|
|
int this; /* this request ID */
|
|
struct ata_composite *composite; /* for composite atomic ops */
|
|
void *driver; /* driver specific */
|
|
TAILQ_ENTRY(ata_request) chain; /* list management */
|
|
};
|
|
|
|
/* define this for debugging request processing */
|
|
#if 0
|
|
#define ATA_DEBUG_RQ(request, string) \
|
|
{ \
|
|
if (request->flags & ATA_R_DEBUG) \
|
|
device_printf(request->dev, "req=%p %s " string "\n", \
|
|
request, ata_cmd2str(request)); \
|
|
}
|
|
#else
|
|
#define ATA_DEBUG_RQ(request, string)
|
|
#endif
|
|
|
|
|
|
/* structure describing an ATA/ATAPI device */
|
|
struct ata_device {
|
|
device_t dev; /* device handle */
|
|
int unit; /* physical unit */
|
|
#define ATA_MASTER 0x00
|
|
#define ATA_SLAVE 0x01
|
|
#define ATA_PM 0x0f
|
|
|
|
struct ata_params param; /* ata param structure */
|
|
int mode; /* current transfermode */
|
|
u_int32_t max_iosize; /* max IO size */
|
|
int spindown; /* idle spindown timeout */
|
|
struct callout spindown_timer;
|
|
int spindown_state;
|
|
int flags;
|
|
#define ATA_D_USE_CHS 0x0001
|
|
#define ATA_D_MEDIA_CHANGED 0x0002
|
|
#define ATA_D_ENC_PRESENT 0x0004
|
|
#define ATA_D_48BIT_ACTIVE 0x0008
|
|
};
|
|
|
|
/* structure for holding DMA Physical Region Descriptors (PRD) entries */
|
|
struct ata_dma_prdentry {
|
|
u_int32_t addr;
|
|
u_int32_t count;
|
|
};
|
|
|
|
/* structure used by the setprd function */
|
|
struct ata_dmasetprd_args {
|
|
void *dmatab;
|
|
int nsegs;
|
|
int error;
|
|
};
|
|
|
|
struct ata_dmaslot {
|
|
u_int8_t status; /* DMA status */
|
|
bus_dma_tag_t sg_tag; /* SG list DMA tag */
|
|
bus_dmamap_t sg_map; /* SG list DMA map */
|
|
void *sg; /* DMA transfer table */
|
|
bus_addr_t sg_bus; /* bus address of dmatab */
|
|
bus_dma_tag_t data_tag; /* data DMA tag */
|
|
bus_dmamap_t data_map; /* data DMA map */
|
|
};
|
|
|
|
/* structure holding DMA related information */
|
|
struct ata_dma {
|
|
bus_dma_tag_t dmatag; /* parent DMA tag */
|
|
bus_dma_tag_t work_tag; /* workspace DMA tag */
|
|
bus_dmamap_t work_map; /* workspace DMA map */
|
|
u_int8_t *work; /* workspace */
|
|
bus_addr_t work_bus; /* bus address of dmatab */
|
|
|
|
#define ATA_DMA_SLOTS 32
|
|
int dma_slots; /* DMA slots allocated */
|
|
struct ata_dmaslot slot[ATA_DMA_SLOTS];
|
|
u_int32_t alignment; /* DMA SG list alignment */
|
|
u_int32_t boundary; /* DMA SG list boundary */
|
|
u_int32_t segsize; /* DMA SG list segment size */
|
|
u_int32_t max_iosize; /* DMA data max IO size */
|
|
u_int64_t max_address; /* highest DMA'able address */
|
|
int flags;
|
|
#define ATA_DMA_ACTIVE 0x01 /* DMA transfer in progress */
|
|
|
|
void (*alloc)(device_t dev);
|
|
void (*free)(device_t dev);
|
|
void (*setprd)(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
|
|
int (*load)(struct ata_request *request, void *addr, int *nsegs);
|
|
int (*unload)(struct ata_request *request);
|
|
int (*start)(struct ata_request *request);
|
|
int (*stop)(struct ata_request *request);
|
|
void (*reset)(device_t dev);
|
|
};
|
|
|
|
/* structure holding lowlevel functions */
|
|
struct ata_lowlevel {
|
|
u_int32_t (*softreset)(device_t dev, int pmport);
|
|
int (*pm_read)(device_t dev, int port, int reg, u_int32_t *result);
|
|
int (*pm_write)(device_t dev, int port, int reg, u_int32_t value);
|
|
int (*status)(device_t dev);
|
|
int (*begin_transaction)(struct ata_request *request);
|
|
int (*end_transaction)(struct ata_request *request);
|
|
int (*command)(struct ata_request *request);
|
|
void (*tf_read)(struct ata_request *request);
|
|
void (*tf_write)(struct ata_request *request);
|
|
};
|
|
|
|
/* structure holding resources for an ATA channel */
|
|
struct ata_resource {
|
|
struct resource *res;
|
|
int offset;
|
|
};
|
|
|
|
/* structure describing an ATA channel */
|
|
struct ata_channel {
|
|
device_t dev; /* device handle */
|
|
int unit; /* physical channel */
|
|
struct ata_resource r_io[ATA_MAX_RES];/* I/O resources */
|
|
struct resource *r_irq; /* interrupt of this channel */
|
|
void *ih; /* interrupt handle */
|
|
struct ata_lowlevel hw; /* lowlevel HW functions */
|
|
struct ata_dma dma; /* DMA data / functions */
|
|
int flags; /* channel flags */
|
|
#define ATA_NO_SLAVE 0x01
|
|
#define ATA_USE_16BIT 0x02
|
|
#define ATA_ATAPI_DMA_RO 0x04
|
|
#define ATA_NO_48BIT_DMA 0x08
|
|
#define ATA_ALWAYS_DMASTAT 0x10
|
|
|
|
int devices; /* what is present */
|
|
#define ATA_ATA_MASTER 0x00000001
|
|
#define ATA_ATA_SLAVE 0x00000002
|
|
#define ATA_PORTMULTIPLIER 0x00008000
|
|
#define ATA_ATAPI_MASTER 0x00010000
|
|
#define ATA_ATAPI_SLAVE 0x00020000
|
|
|
|
struct mtx state_mtx; /* state lock */
|
|
int state; /* ATA channel state */
|
|
#define ATA_IDLE 0x0000
|
|
#define ATA_ACTIVE 0x0001
|
|
#define ATA_STALL_QUEUE 0x0002
|
|
|
|
struct mtx queue_mtx; /* queue lock */
|
|
TAILQ_HEAD(, ata_request) ata_queue; /* head of ATA queue */
|
|
struct ata_request *freezepoint; /* composite freezepoint */
|
|
struct ata_request *running; /* currently running request */
|
|
};
|
|
|
|
/* disk bay/enclosure related */
|
|
#define ATA_LED_OFF 0x00
|
|
#define ATA_LED_RED 0x01
|
|
#define ATA_LED_GREEN 0x02
|
|
#define ATA_LED_ORANGE 0x03
|
|
#define ATA_LED_MASK 0x03
|
|
|
|
/* externs */
|
|
extern int (*ata_raid_ioctl_func)(u_long cmd, caddr_t data);
|
|
extern struct intr_config_hook *ata_delayed_attach;
|
|
extern devclass_t ata_devclass;
|
|
extern int ata_wc;
|
|
extern int ata_setmax;
|
|
extern int ata_dma_check_80pin;
|
|
|
|
/* public prototypes */
|
|
/* ata-all.c: */
|
|
int ata_probe(device_t dev);
|
|
int ata_attach(device_t dev);
|
|
int ata_detach(device_t dev);
|
|
int ata_reinit(device_t dev);
|
|
int ata_suspend(device_t dev);
|
|
int ata_resume(device_t dev);
|
|
int ata_interrupt(void *data);
|
|
int ata_device_ioctl(device_t dev, u_long cmd, caddr_t data);
|
|
int ata_getparam(struct ata_device *atadev, int init);
|
|
int ata_identify(device_t dev);
|
|
void ata_default_registers(device_t dev);
|
|
void ata_modify_if_48bit(struct ata_request *request);
|
|
void ata_udelay(int interval);
|
|
char *ata_unit2str(struct ata_device *atadev);
|
|
char *ata_mode2str(int mode);
|
|
int ata_atapi(device_t dev);
|
|
int ata_pmode(struct ata_params *ap);
|
|
int ata_wmode(struct ata_params *ap);
|
|
int ata_umode(struct ata_params *ap);
|
|
int ata_limit_mode(device_t dev, int mode, int maxmode);
|
|
|
|
/* ata-queue.c: */
|
|
int ata_controlcmd(device_t dev, u_int8_t command, u_int16_t feature, u_int64_t lba, u_int16_t count);
|
|
int ata_atapicmd(device_t dev, u_int8_t *ccb, caddr_t data, int count, int flags, int timeout);
|
|
void ata_queue_request(struct ata_request *request);
|
|
void ata_start(device_t dev);
|
|
void ata_finish(struct ata_request *request);
|
|
void ata_timeout(struct ata_request *);
|
|
void ata_catch_inflight(device_t dev);
|
|
void ata_fail_requests(device_t dev);
|
|
char *ata_cmd2str(struct ata_request *request);
|
|
|
|
/* ata-lowlevel.c: */
|
|
void ata_generic_hw(device_t dev);
|
|
int ata_begin_transaction(struct ata_request *);
|
|
int ata_end_transaction(struct ata_request *);
|
|
void ata_generic_reset(device_t dev);
|
|
int ata_generic_command(struct ata_request *request);
|
|
|
|
/* macros for alloc/free of struct ata_request */
|
|
extern uma_zone_t ata_request_zone;
|
|
#define ata_alloc_request() uma_zalloc(ata_request_zone, M_NOWAIT | M_ZERO)
|
|
#define ata_free_request(request) { \
|
|
if (!(request->flags & ATA_R_DANGER2)) \
|
|
uma_zfree(ata_request_zone, request); \
|
|
}
|
|
|
|
/* macros for alloc/free of struct ata_composite */
|
|
extern uma_zone_t ata_composite_zone;
|
|
#define ata_alloc_composite() uma_zalloc(ata_composite_zone, M_NOWAIT | M_ZERO)
|
|
#define ata_free_composite(composite) uma_zfree(ata_composite_zone, composite)
|
|
|
|
MALLOC_DECLARE(M_ATA);
|
|
|
|
/* misc newbus defines */
|
|
#define GRANDPARENT(dev) device_get_parent(device_get_parent(dev))
|
|
|
|
/* macros to hide busspace uglyness */
|
|
#define ATA_INB(res, offset) \
|
|
bus_read_1((res), (offset))
|
|
|
|
#define ATA_INW(res, offset) \
|
|
bus_read_2((res), (offset))
|
|
#define ATA_INL(res, offset) \
|
|
bus_read_4((res), (offset))
|
|
#define ATA_INSW(res, offset, addr, count) \
|
|
bus_read_multi_2((res), (offset), (addr), (count))
|
|
#define ATA_INSW_STRM(res, offset, addr, count) \
|
|
bus_read_multi_stream_2((res), (offset), (addr), (count))
|
|
#define ATA_INSL(res, offset, addr, count) \
|
|
bus_read_multi_4((res), (offset), (addr), (count))
|
|
#define ATA_INSL_STRM(res, offset, addr, count) \
|
|
bus_read_multi_stream_4((res), (offset), (addr), (count))
|
|
#define ATA_OUTB(res, offset, value) \
|
|
bus_write_1((res), (offset), (value))
|
|
#define ATA_OUTW(res, offset, value) \
|
|
bus_write_2((res), (offset), (value))
|
|
#define ATA_OUTL(res, offset, value) \
|
|
bus_write_4((res), (offset), (value))
|
|
#define ATA_OUTSW(res, offset, addr, count) \
|
|
bus_write_multi_2((res), (offset), (addr), (count))
|
|
#define ATA_OUTSW_STRM(res, offset, addr, count) \
|
|
bus_write_multi_stream_2((res), (offset), (addr), (count))
|
|
#define ATA_OUTSL(res, offset, addr, count) \
|
|
bus_write_multi_4((res), (offset), (addr), (count))
|
|
#define ATA_OUTSL_STRM(res, offset, addr, count) \
|
|
bus_write_multi_stream_4((res), (offset), (addr), (count))
|
|
|
|
#define ATA_IDX_INB(ch, idx) \
|
|
ATA_INB(ch->r_io[idx].res, ch->r_io[idx].offset)
|
|
|
|
#define ATA_IDX_INW(ch, idx) \
|
|
ATA_INW(ch->r_io[idx].res, ch->r_io[idx].offset)
|
|
|
|
#define ATA_IDX_INL(ch, idx) \
|
|
ATA_INL(ch->r_io[idx].res, ch->r_io[idx].offset)
|
|
|
|
#define ATA_IDX_INSW(ch, idx, addr, count) \
|
|
ATA_INSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_INSW_STRM(ch, idx, addr, count) \
|
|
ATA_INSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_INSL(ch, idx, addr, count) \
|
|
ATA_INSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_INSL_STRM(ch, idx, addr, count) \
|
|
ATA_INSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_OUTB(ch, idx, value) \
|
|
ATA_OUTB(ch->r_io[idx].res, ch->r_io[idx].offset, value)
|
|
|
|
#define ATA_IDX_OUTW(ch, idx, value) \
|
|
ATA_OUTW(ch->r_io[idx].res, ch->r_io[idx].offset, value)
|
|
|
|
#define ATA_IDX_OUTL(ch, idx, value) \
|
|
ATA_OUTL(ch->r_io[idx].res, ch->r_io[idx].offset, value)
|
|
|
|
#define ATA_IDX_OUTSW(ch, idx, addr, count) \
|
|
ATA_OUTSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_OUTSW_STRM(ch, idx, addr, count) \
|
|
ATA_OUTSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_OUTSL(ch, idx, addr, count) \
|
|
ATA_OUTSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|
|
|
|
#define ATA_IDX_OUTSL_STRM(ch, idx, addr, count) \
|
|
ATA_OUTSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
|