freebsd-src/sys/dev/ata/ata-cbus.c
Søren Schmidt bb5bdd386e First round off updates/fixes to the ATA driver.
This moves all chipset specific code to a new file 'ata-chipset.c'.
Extensive use of tables and pointers to avoid having the same switch
on chipset type in several places, and to allow substituting various
functions for different HW arch needs.
Added PIO mode setup and all DMA modes.
Support for all known SiS chipsets. Thanks to Christoph Kukulies for
sponsoring a nice ASUS P4S8X SiS648 based board for this work!

Tested on:	i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00

309 lines
8.7 KiB
C

/*-
* Copyright (c) 2002, 2003 Søren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_ata.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/ata.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <isa/isavar.h>
#include <dev/ata/ata-all.h>
/* local vars */
static bus_addr_t ata_pc98_ports[] = {
0x0, 0x2, 0x4, 0x6, 0x8, 0xa, 0xc, 0xe
};
struct ata_cbus_controller {
struct resource *io;
struct resource *altio;
struct resource *bankio;
struct resource *irq;
void *ih;
void (*setmode)(struct ata_device *, int);
void (*locking)(struct ata_channel *, int);
int current_bank;
struct {
void (*function)(void *);
void *argument;
} interrupt[2];
};
/* local prototypes */
static void ata_cbus_intr(void *);
static void ata_cbus_banking(struct ata_channel *, int);
static void ata_cbus_setmode(struct ata_device *, int);
static int
ata_cbus_probe(device_t dev)
{
struct resource *io;
int rid;
u_long tmp;
/* dont probe PnP devices */
if (isa_get_vendorid(dev))
return (ENXIO);
/* allocate the ioport range */
rid = ATA_IOADDR_RID;
io = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, ata_pc98_ports,
ATA_IOSIZE, RF_ACTIVE);
if (!io)
return ENOMEM;
isa_load_resourcev(io, ata_pc98_ports, ATA_IOSIZE);
/* calculate & set the altport range */
rid = ATA_PC98_ALTADDR_RID;
if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) {
bus_set_resource(dev, SYS_RES_IOPORT, rid,
rman_get_start(io)+ATA_PC98_ALTOFFSET, ATA_ALTIOSIZE);
}
/* calculate & set the bank range */
rid = ATA_PC98_BANKADDR_RID;
if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) {
bus_set_resource(dev, SYS_RES_IOPORT, rid,
ATA_PC98_BANK, ATA_PC98_BANKIOSIZE);
}
bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io);
return 0;
}
static int
ata_cbus_attach(device_t dev)
{
struct ata_cbus_controller *ctlr = device_get_softc(dev);
int rid;
/* allocate resources */
rid = ATA_IOADDR_RID;
ctlr->io = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, ata_pc98_ports,
ATA_IOSIZE, RF_ACTIVE);
if (!ctlr->io)
return ENOMEM;
isa_load_resourcev(ctlr->io, ata_pc98_ports, ATA_IOSIZE);
rid = ATA_PC98_ALTADDR_RID;
ctlr->altio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
rman_get_start(ctlr->io)+ATA_PC98_ALTOFFSET,
~0, ATA_ALTIOSIZE, RF_ACTIVE);
if (!ctlr->altio)
return ENOMEM;
rid = ATA_PC98_BANKADDR_RID;
ctlr->bankio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
ATA_PC98_BANK, ~0,
ATA_PC98_BANKIOSIZE, RF_ACTIVE);
if (!ctlr->bankio)
return ENOMEM;
rid = 0;
if (!(ctlr->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
0, ~0, 1, RF_ACTIVE | RF_SHAREABLE))) {
device_printf(dev, "unable to alloc interrupt\n");
return ENXIO;
}
if ((bus_setup_intr(dev, ctlr->irq, INTR_TYPE_BIO | INTR_ENTROPY,
ata_cbus_intr, ctlr, &ctlr->ih))) {
device_printf(dev, "unable to setup interrupt\n");
return ENXIO;
}
ctlr->locking = ata_cbus_banking;
ctlr->current_bank = -1;
ctlr->setmode = ata_cbus_setmode;;
if (!device_add_child(dev, "ata", 0))
return ENOMEM;
if (!device_add_child(dev, "ata", 1))
return ENOMEM;
return bus_generic_attach(dev);
}
static struct resource *
ata_cbus_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct ata_cbus_controller *ctlr = device_get_softc(dev);
if (type == SYS_RES_IOPORT) {
switch (*rid) {
case ATA_IOADDR_RID:
return ctlr->io;
case ATA_ALTADDR_RID:
return ctlr->altio;
}
}
if (type == SYS_RES_IRQ) {
return ctlr->irq;
}
return 0;
}
static int
ata_cbus_setup_intr(device_t dev, device_t child, struct resource *irq,
int flags, driver_intr_t *intr, void *arg,
void **cookiep)
{
struct ata_cbus_controller *controller = device_get_softc(dev);
int unit = ((struct ata_channel *)device_get_softc(child))->unit;
controller->interrupt[unit].function = intr;
controller->interrupt[unit].argument = arg;
*cookiep = controller;
return 0;
}
static int
ata_cbus_print_child(device_t dev, device_t child)
{
struct ata_channel *ch = device_get_softc(child);
int retval = 0;
retval += bus_print_child_header(dev, child);
retval += printf(" at bank %d", ch->unit);
retval += bus_print_child_footer(dev, child);
return retval;
}
static void
ata_cbus_intr(void *data)
{
struct ata_cbus_controller *ctlr = data;
if (ctlr->current_bank != -1 &&
ctlr->interrupt[ctlr->current_bank].argument)
ctlr->interrupt[ctlr->current_bank].
function(ctlr->interrupt[ctlr->current_bank].argument);
}
static void
ata_cbus_banking(struct ata_channel *ch, int flags)
{
struct ata_cbus_controller *ctlr =
device_get_softc(device_get_parent(ch->dev));
switch (flags) {
case ATA_LF_LOCK:
if (ctlr->current_bank == ch->unit)
break;
while (!atomic_cmpset_acq_int(&ctlr->current_bank, -1, ch->unit))
tsleep((caddr_t)ch->locking, PRIBIO, "atalck", 1);
bus_space_write_1(rman_get_bustag(ctlr->bankio),
rman_get_bushandle(ctlr->bankio), 0, ch->unit);
break;
case ATA_LF_UNLOCK:
if (ctlr->current_bank == -1 || ctlr->current_bank != ch->unit)
break;
atomic_store_rel_int(&ctlr->current_bank, -1);
break;
}
return;
}
static void
ata_cbus_setmode(struct ata_device *atadev, int mode)
{
atadev->mode = ata_limit_mode(atadev, mode, ATA_PIO_MAX);
}
static device_method_t ata_cbus_methods[] = {
/* device_interface */
DEVMETHOD(device_probe, ata_cbus_probe),
DEVMETHOD(device_attach, ata_cbus_attach),
/* bus methods */
DEVMETHOD(bus_alloc_resource, ata_cbus_alloc_resource),
DEVMETHOD(bus_setup_intr, ata_cbus_setup_intr),
DEVMETHOD(bus_print_child, ata_cbus_print_child),
{ 0, 0 }
};
static driver_t ata_cbus_driver = {
"atacbus",
ata_cbus_methods,
sizeof(struct ata_cbus_controller),
};
static devclass_t ata_cbus_devclass;
DRIVER_MODULE(atacbus, isa, ata_cbus_driver, ata_cbus_devclass, 0, 0);
static int
ata_cbussub_probe(device_t dev)
{
struct ata_cbus_controller *ctlr = device_get_softc(device_get_parent(dev));
struct ata_channel *ch = device_get_softc(dev);
device_t *children;
int count, i;
/* find channel number on this controller */
device_get_children(device_get_parent(dev), &children, &count);
for (i = 0; i < count; i++) {
if (children[i] == dev)
ch->unit = i;
}
free(children, M_TEMP);
ch->flags |= ATA_USE_16BIT | ATA_USE_PC98GEOM;
ch->device[MASTER].setmode = ctlr->setmode;
ch->device[SLAVE].setmode = ctlr->setmode;
ch->locking = ctlr->locking;
return ata_probe(dev);
}
static device_method_t ata_cbussub_methods[] = {
/* device interface */
DEVMETHOD(device_probe, ata_cbussub_probe),
DEVMETHOD(device_attach, ata_attach),
DEVMETHOD(device_detach, ata_detach),
DEVMETHOD(device_resume, ata_resume),
{ 0, 0 }
};
static driver_t ata_cbussub_driver = {
"ata",
ata_cbussub_methods,
sizeof(struct ata_channel),
};
DRIVER_MODULE(ata, atacbus, ata_cbussub_driver, ata_devclass, 0, 0);