freebsd-src/contrib/serf/serf_bucket_util.h
2013-08-02 19:21:46 +00:00

295 lines
8.2 KiB
C

/* Copyright 2002-2004 Justin Erenkrantz and Greg Stein
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SERF_BUCKET_UTIL_H
#define SERF_BUCKET_UTIL_H
/**
* @file serf_bucket_util.h
* @brief This header defines a set of functions and other utilities
* for implementing buckets. It is not needed by users of the bucket
* system.
*/
#include "serf.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Basic bucket creation function.
*
* This function will create a bucket of @a type, allocating the necessary
* memory from @a allocator. The @a data bucket-private information will
* be stored into the bucket.
*/
serf_bucket_t *serf_bucket_create(
const serf_bucket_type_t *type,
serf_bucket_alloc_t *allocator,
void *data);
/**
* Default implementation of the @see read_iovec functionality.
*
* This function will use the @see read function to get a block of memory,
* then return it in the iovec.
*/
apr_status_t serf_default_read_iovec(
serf_bucket_t *bucket,
apr_size_t requested,
int vecs_size,
struct iovec *vecs,
int *vecs_used);
/**
* Default implementation of the @see read_for_sendfile functionality.
*
* This function will use the @see read function to get a block of memory,
* then return it as a header. No file will be returned.
*/
apr_status_t serf_default_read_for_sendfile(
serf_bucket_t *bucket,
apr_size_t requested,
apr_hdtr_t *hdtr,
apr_file_t **file,
apr_off_t *offset,
apr_size_t *len);
/**
* Default implementation of the @see read_bucket functionality.
*
* This function will always return NULL, indicating that the @a type
* of bucket cannot be found within @a bucket.
*/
serf_bucket_t *serf_default_read_bucket(
serf_bucket_t *bucket,
const serf_bucket_type_t *type);
/**
* Default implementation of the @see destroy functionality.
*
* This function will return the @a bucket to its allcoator.
*/
void serf_default_destroy(
serf_bucket_t *bucket);
/**
* Default implementation of the @see destroy functionality.
*
* This function will return the @a bucket, and the data member to its
* allocator.
*/
void serf_default_destroy_and_data(
serf_bucket_t *bucket);
/**
* Allocate @a size bytes of memory using @a allocator.
*
* Returns NULL of the requested memory size could not be allocated.
*/
void *serf_bucket_mem_alloc(
serf_bucket_alloc_t *allocator,
apr_size_t size);
/**
* Allocate @a size bytes of memory using @a allocator and set all of the
* memory to 0.
*
* Returns NULL of the requested memory size could not be allocated.
*/
void *serf_bucket_mem_calloc(
serf_bucket_alloc_t *allocator,
apr_size_t size);
/**
* Free the memory at @a block, returning it to @a allocator.
*/
void serf_bucket_mem_free(
serf_bucket_alloc_t *allocator,
void *block);
/**
* Analogous to apr_pstrmemdup, using a bucket allocator instead.
*/
char *serf_bstrmemdup(
serf_bucket_alloc_t *allocator,
const char *str,
apr_size_t size);
/**
* Analogous to apr_pmemdup, using a bucket allocator instead.
*/
void * serf_bmemdup(
serf_bucket_alloc_t *allocator,
const void *mem,
apr_size_t size);
/**
* Analogous to apr_pstrdup, using a bucket allocator instead.
*/
char * serf_bstrdup(
serf_bucket_alloc_t *allocator,
const char *str);
/**
* Analogous to apr_pstrcatv, using a bucket allocator instead.
*/
char * serf_bstrcatv(
serf_bucket_alloc_t *allocator,
struct iovec *vec,
int vecs,
apr_size_t *bytes_written);
/**
* Read data up to a newline.
*
* @a acceptable contains the allowed forms of a newline, and @a found
* will return the particular newline type that was found. If a newline
* is not found, then SERF_NEWLINE_NONE will be placed in @a found.
*
* @a data should contain a pointer to the data to be scanned. @a len
* should specify the length of that data buffer. On exit, @a data will
* be advanced past the newline, and @a len will specify the remaining
* amount of data in the buffer.
*
* Given this pattern of behavior, the caller should store the initial
* value of @a data as the line start. The difference between the
* returned value of @a data and the saved start is the length of the
* line.
*
* Note that the newline character(s) will remain within the buffer.
* This function scans at a byte level for the newline characters. Thus,
* the data buffer may contain NUL characters. As a corollary, this
* function only works on 8-bit character encodings.
*
* If the data is fully consumed (@a len gets set to zero) and a CR
* character is found at the end and the CRLF sequence is allowed, then
* this function may store SERF_NEWLINE_CRLF_SPLIT into @a found. The
* caller should take particular consideration for the CRLF sequence
* that may be split across data buffer boundaries.
*/
void serf_util_readline(
const char **data,
apr_size_t *len,
int acceptable,
int *found);
/** The buffer size used within @see serf_databuf_t. */
#define SERF_DATABUF_BUFSIZE 8000
/** Callback function which is used to refill the data buffer.
*
* The function takes @a baton, which is the @see read_baton value
* from the serf_databuf_t structure. Data should be placed into
* a buffer specified by @a buf, which is @a bufsize bytes long.
* The amount of data read should be returned in @a len.
*
* APR_EOF should be returned if no more data is available. APR_EAGAIN
* should be returned, rather than blocking. In both cases, @a buf
* should be filled in and @a len set, as appropriate.
*/
typedef apr_status_t (*serf_databuf_reader_t)(
void *baton,
apr_size_t bufsize,
char *buf,
apr_size_t *len);
/**
* This structure is used as an intermediate data buffer for some "external"
* source of data. It works as a scratch pad area for incoming data to be
* stored, and then returned as a ptr/len pair by the bucket read functions.
*
* This structure should be initialized by calling @see serf_databuf_init.
* Users should not bother to zero the structure beforehand.
*/
typedef struct {
/** The current data position within the buffer. */
const char *current;
/** Amount of data remaining in the buffer. */
apr_size_t remaining;
/** Callback function. */
serf_databuf_reader_t read;
/** A baton to hold context-specific data. */
void *read_baton;
/** Records the status from the last @see read operation. */
apr_status_t status;
/** Holds the data until it can be returned. */
char buf[SERF_DATABUF_BUFSIZE];
} serf_databuf_t;
/**
* Initialize the @see serf_databuf_t structure specified by @a databuf.
*/
void serf_databuf_init(
serf_databuf_t *databuf);
/**
* Implement a bucket-style read function from the @see serf_databuf_t
* structure given by @a databuf.
*
* The @a requested, @a data, and @a len fields are interpreted and used
* as in the read function of @see serf_bucket_t.
*/
apr_status_t serf_databuf_read(
serf_databuf_t *databuf,
apr_size_t requested,
const char **data,
apr_size_t *len);
/**
* Implement a bucket-style readline function from the @see serf_databuf_t
* structure given by @a databuf.
*
* The @a acceptable, @a found, @a data, and @a len fields are interpreted
* and used as in the read function of @see serf_bucket_t.
*/
apr_status_t serf_databuf_readline(
serf_databuf_t *databuf,
int acceptable,
int *found,
const char **data,
apr_size_t *len);
/**
* Implement a bucket-style peek function from the @see serf_databuf_t
* structure given by @a databuf.
*
* The @a data, and @a len fields are interpreted and used as in the
* peek function of @see serf_bucket_t.
*/
apr_status_t serf_databuf_peek(
serf_databuf_t *databuf,
const char **data,
apr_size_t *len);
#ifdef __cplusplus
}
#endif
#endif /* !SERF_BUCKET_UTIL_H */