mirror of
https://github.com/freebsd/freebsd-src
synced 2024-10-20 15:24:25 +00:00
4c10dd65ca
USB-EL1201A or even USB-EL1202A. Wonder what drugs I was on when I made this mistake, and then propagated it to 6 different files. *sigh*
656 lines
21 KiB
Plaintext
656 lines
21 KiB
Plaintext
Table of Contents
|
|
-----------------
|
|
0. Document Conventions
|
|
1. Default Configuration (GENERIC kernel)
|
|
2. LINT - other possible configurations
|
|
3. Supported Hardware
|
|
|
|
See TROUBLE.TXT for Q&A on known hardware problems.
|
|
|
|
=========================================================================
|
|
|
|
0. Document Conventions
|
|
-- --------------------
|
|
|
|
We have `underlined' text which represents user input with `-' symbols
|
|
throughout this document to differentiate it from the machine output.
|
|
|
|
1. Default (GENERIC) Configuration
|
|
-- -------------------------------
|
|
|
|
The following table contains a list of all of the devices that are
|
|
present in the GENERIC kernel. This is the essential part of the
|
|
operating system that is placed in your root partition during the
|
|
installation process. A compressed version of the GENERIC kernel is
|
|
also used on the installation floppy diskette and DOS boot image.
|
|
|
|
The table describes the various parameters used by the driver to
|
|
communicate with the hardware in your system. There are four
|
|
parameters in the table, though not all are used by each and every
|
|
device:
|
|
|
|
Port The starting I/O port used by the device, shown in hexadecimal.
|
|
|
|
IOMem The lowest (or starting) memory address used by the device,
|
|
also shown in hexadecimal.
|
|
|
|
IRQ The interrupt the device uses to alert the driver to an event,
|
|
given in decimal.
|
|
|
|
DRQ The DMA (direct memory access) channel the device uses to move
|
|
data to and from main memory, also given in decimal.
|
|
|
|
If an entry in the table has `n/a' for a value then it means that the
|
|
parameter in question does not apply to that device. A value of `dyn'
|
|
means that the correct value should be determined automatically by the
|
|
kernel when the system boots and that you don't need to worry about
|
|
it.
|
|
|
|
If an entry is marked with an *, it means that support is currently
|
|
not available for it but should be back as soon as someone converts
|
|
the driver to work within the new 3.0 framework.
|
|
|
|
FreeBSD GENERIC kernel:
|
|
|
|
Port IRQ DRQ IOMem Description
|
|
---- --- --- ----- ---------------------------------
|
|
fdc0 3f0 6 2 n/a Floppy disk controller
|
|
wdc0 1f0 14 n/a n/a IDE/MFM/RLL disk controller
|
|
wdc1 170 15 n/a n/a IDE/MFM/RLL disk controller
|
|
|
|
adv0 n/a n/a n/a n/a AdvanSys Narrow SCSI controllers
|
|
adw0 n/a n/a n/a n/a AdvanSys Wide SCSI controllers
|
|
ncr0 n/a n/a n/a n/a NCR PCI SCSI controller
|
|
bt0 330 dyn dyn dyn Buslogic SCSI controller
|
|
uha0* 330 dyn 6 dyn Ultrastore 14f
|
|
aha0 330 dyn 5 dyn Adaptec 154x/1535 SCSI controller
|
|
ahb0 dyn dyn dyn dyn Adaptec 174x SCSI controller
|
|
ahc0 dyn dyn dyn dyn Adaptec 274x/284x/294x SCSI controller
|
|
aic0 340 11 dyn dyn Adaptec 152x/AIC-6360/AIC-6260 SCSI
|
|
controller
|
|
isp0 dyn dyn dyn dyn QLogic 10X0, 2100 SCSI/FC controllers
|
|
dpt n/a n/a n/a n/a DPT RAID SCSI controllers.
|
|
|
|
wt0 300 5 1 dyn Wangtek and Archive QIC-02/QIC-36
|
|
|
|
psm0 60 12 n/a n/a PS/2 Mouse
|
|
|
|
mcd0 300 10 n/a n/a Mitsumi CD-ROM
|
|
matcd0 230 n/a n/a n/a Matsushita/Panasonic CD-ROM
|
|
scd0 230 n/a n/a n/a Sony CD-ROM
|
|
|
|
sio0 3f8 4 n/a n/a Serial Port 0 (COM1)
|
|
sio1 2f8 3 n/a n/a Serial Port 1 (COM2)
|
|
|
|
lpt0 dyn 7 n/a n/a Printer Port 0
|
|
lpt1 dyn dyn n/a n/a Printer Port 1
|
|
|
|
dc0 n/a n/a n/a n/a DEC/Intel 21143 and workalikes
|
|
de0 n/a n/a n/a n/a DEC DC21x40 PCI based cards
|
|
(including 21140 100bT cards)
|
|
ed0 280 10 dyn d8000 WD & SMC 80xx; Novell NE1000 &
|
|
NE2000; 3Com 3C503; HP PC Lan+
|
|
eg0 310 5 dyn dyn 3Com 3C505
|
|
ep0 300 10 dyn dyn 3Com 3C509
|
|
ex0 dyn dyn dyn n/a Intel EtherExpress Pro/10 cards
|
|
fe0 300 dyn n/a n/a Allied-Telesyn AT1700, RE2000 and
|
|
Fujitsu FMV-180 series cards.
|
|
fxp0 dyn dyn n/a dyn Intel EtherExpress Pro/100B
|
|
ie0 300 10 dyn d0000 AT&T StarLAN 10 and EN100;
|
|
3Com 3C507; NI5210;
|
|
Intel EtherExpress (8/16,16[TP]) cards
|
|
le0 300 5 dyn d0000 Digital Equipment EtherWorks
|
|
2 and EtherWorks 3
|
|
lnc0 280 10 n/a dyn Lance/PCnet cards
|
|
(Isolan, Novell NE2100, NE32-VL,
|
|
some PCnet-PCI cards)
|
|
rl0 dyn dyn n/a dyn RealTek 8129/8139 fast ethernet
|
|
sf0 dyn dyn n/a dyn Adaptec AIC-6915 fast ethernet
|
|
sis0 dyn dyn n/a dyn SiS 900/SiS 7016 fast ethernet
|
|
ste0 dyn dyn n/a dyn Sundance ST201 fast ethernet
|
|
tl0 dyn dyn n/a dyn TI TNET100 'ThunderLAN' cards.
|
|
wb0 dyn dyn n/a dyn Winbond W89C840F PCI based cards.
|
|
vr0 dyn dyn n/a dyn VIA VT3043/VT86C100A PCI based cards.
|
|
vx0 dyn dyn n/a dyn 3Com 3c59x ((Fast) Etherlink III)
|
|
xl0 dyn dyn n/a dyn 3Com 3c900, 3c905, 3c905B, 3c905C,
|
|
3c980, 3cSOHO100 ((Fast) Etherlink XL)
|
|
cs0 0x300 dyn n/a n/a Crystal Semiconductor CS89x0-based
|
|
cards.
|
|
--- End of table ---
|
|
|
|
|
|
If the hardware in your computer is not set to the same settings as
|
|
those shown in the table and the item in conflict is not marked 'dyn',
|
|
you will have to either reconfigure your hardware or use UserConfig
|
|
to reconfigure the kernel to match the way your hardware is currently set
|
|
(see the next section).
|
|
|
|
If the settings do not match, the kernel may be unable to locate
|
|
or reliably access the devices in your system.
|
|
|
|
|
|
2. LINT - other possible configurations
|
|
-- ------------------------------------
|
|
|
|
The following drivers are not in the GENERIC kernel but remain
|
|
available to those who do not mind compiling a custom kernel (see
|
|
section 6 of FreeBSD.FAQ). The LINT configuration file
|
|
(/sys/i386/conf/LINT) also contains prototype entries for just about
|
|
every device supported by FreeBSD and is a good general reference.
|
|
|
|
The device names and a short description of each are listed below. The port
|
|
numbers, etc, are not meaningful here since you will need to compile a
|
|
custom kernel to gain access to these devices anyway and can thus
|
|
adjust the addresses to match the hardware in your computer in the process.
|
|
The LINT file contains prototype entries for all of the below which you
|
|
can easily cut-and-paste into your own file (or simply copy LINT and edit
|
|
it to taste):
|
|
|
|
ctx: Cortex-I frame grabber
|
|
cx: Cronyx/Sigma multiport sync/async
|
|
cy: Cyclades high-speed serial driver
|
|
el: 3Com 3C501
|
|
fea: DEC DEFEA EISA FDDI adapter
|
|
fpa: DEC DEFPA PCI FDDI adapter
|
|
gp: National Instruments AT-GPIB and AT-GPIB/TNT board
|
|
gsc: Genius GS-4500 hand scanner
|
|
gus: Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX
|
|
gusxvi: Gravis Ultrasound 16-bit PCM
|
|
hea: Efficient ENI-155p ATM PCI adapter
|
|
hfa: FORE PCA-200E ATM PCI adapter
|
|
isic: isdn4bsd Siemens ISDN Chipset driver
|
|
joy: Joystick
|
|
labpc: National Instrument's Lab-PC and Lab-PC+
|
|
meteor: Matrox Meteor frame-grabber card
|
|
bktr: Brooktree Bt848 / Bt 878 based frame-grabber cards.
|
|
mpu: Roland MPU-401 stand-alone card
|
|
mse: Microsoft, Logitech, ATI bus mouse ports
|
|
mss: Microsoft Sound System
|
|
opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
|
|
pas: ProAudioSpectrum PCM and MIDI
|
|
pca: PCM audio ("/dev/audio") through your PC speaker
|
|
pcm: PCM audio on most modern PCI/ISA audio codecs
|
|
psm: PS/2 mouse port
|
|
rc: RISCom/8 multiport card
|
|
sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
|
|
sbmidi: SoundBlaster 16 MIDI interface
|
|
sbxvi: SoundBlaster 16
|
|
si: Specialix SI/XIO/SX (old and enhanced ISA, PCI, EISA) serial
|
|
spigot: Creative Labs Video Spigot video-acquisition board
|
|
uart: Stand-alone 6850 UART for MIDI
|
|
wds: Western Digital WD7000 IDE
|
|
|
|
--- end of list ---
|
|
|
|
|
|
3. Supported Hardware
|
|
-- ------------------
|
|
|
|
FreeBSD currently runs on a wide variety of ISA and PCI bus based
|
|
Alphas's. Support for generic IDE or ESDI drive configurations is
|
|
somewhat marginal and a SCSI controller is therefore recommended.
|
|
|
|
What follows is a list of all peripherals currently known to work with
|
|
FreeBSD. Other configurations may also work, we have simply not as yet
|
|
received confirmation of this.
|
|
|
|
|
|
4.1. Disk Controllers
|
|
---- ----------------
|
|
|
|
WD1003 (any generic MFM/RLL)
|
|
WD1007 (any generic IDE/ESDI)
|
|
IDE
|
|
ATA
|
|
|
|
Adaptec 1535 ISA SCSI controllers
|
|
Adaptec 154x series ISA SCSI controllers
|
|
Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
|
|
Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
|
|
EISA/VLB/PCI SCSI controllers.
|
|
Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
|
|
Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
|
|
Adaptec 152x series ISA SCSI controllers
|
|
Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
|
|
and SoundBlaster SCSI cards.
|
|
|
|
AdvanSys SCSI controllers (all models).
|
|
|
|
BusLogic MultiMaster controllers:
|
|
|
|
[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
|
|
|
|
BusLogic MultiMaster "W" Series Host Adapters:
|
|
BT-948, BT-958, BT-958D
|
|
BusLogic MultiMaster "C" Series Host Adapters:
|
|
BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
|
|
BT-540CF
|
|
BusLogic MultiMaster "S" Series Host Adapters:
|
|
BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
|
|
BT-542B
|
|
BusLogic MultiMaster "A" Series Host Adapters:
|
|
BT-742A, BT-542B
|
|
|
|
AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
|
|
supported.
|
|
|
|
DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
|
|
SmartRAID IV SCSI/RAID controllers are supported. The DPT SmartRAID/CACHE V
|
|
is not yet supported.
|
|
|
|
SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
|
|
53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
|
|
ASUS SC-200
|
|
Data Technology DTC3130 (all variants)
|
|
Diamond FirePort (all)
|
|
NCR cards (all)
|
|
Symbios cards (all)
|
|
Tekram DC390W, 390U and 390F
|
|
Tyan S1365
|
|
|
|
|
|
QLogic 1020, 1040, 1040B and 2100 SCSI and Fibre Channel Adapters
|
|
|
|
DTC 3290 EISA SCSI controller in 1542 emulation mode.
|
|
|
|
With all supported SCSI controllers, full support is provided for
|
|
SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
|
|
tape drives (including DAT and 8mm Exabyte), medium changers, processor
|
|
target devices and CDROM drives. WORM devices that support CDROM commands
|
|
are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW
|
|
writing support is provided by cdrecord, which is in the ports tree.
|
|
|
|
The following drivers were supported under the old SCSI subsystem, but are
|
|
NOT YET supported under the new CAM SCSI subsystem:
|
|
|
|
Tekram DC390 and DC390T controllers (maybe other cards based on the
|
|
AMD 53c974 as well).
|
|
|
|
NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller.
|
|
|
|
UltraStor 14F, 24F and 34F SCSI controllers.
|
|
|
|
Seagate ST01/02 SCSI controllers.
|
|
|
|
Future Domain 8xx/950 series SCSI controllers.
|
|
|
|
WD7000 SCSI controller.
|
|
|
|
[ Note: There is work-in-progress to port the UltraStor driver to
|
|
the new CAM SCSI framework, but no estimates on when or if it will
|
|
be completed. ]
|
|
|
|
4.2. Network cards
|
|
---- -------------
|
|
|
|
Adaptec Duralink PCI fast ethernet adapters based on the Adaptec
|
|
AIC-6915 fast ethernet controller chip, including the following:
|
|
ANA-62011 64-bit single port 10/100baseTX adapter
|
|
ANA-62022 64-bit dual port 10/100baseTX adapter
|
|
ANA-62044 64-bit quad port 10/100baseTX adapter
|
|
ANA-69011 32-bit single port 10/100baseTX adapter
|
|
ANA-62020 64-bit single port 100baseFX adapter
|
|
|
|
Allied-Telesyn AT1700 and RE2000 cards
|
|
|
|
Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2
|
|
chipsets, including the following:
|
|
Alteon AceNIC (Tigon 1 and 2)
|
|
3Com 3c985-SX (Tigon 1 and 2)
|
|
Netgear GA620 (Tigon 2)
|
|
Silicon Graphics Gigabit Ethernet
|
|
DEC/Compaq EtherWORKS 1000
|
|
NEC Gigabit Ethernet
|
|
|
|
AMD PCnet/PCI (79c970 & 53c974 or 79c974)
|
|
|
|
SMC Elite 16 WD8013 ethernet interface, and most other WD8003E,
|
|
WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
|
|
based clones. SMC Elite Ultra is also supported.
|
|
|
|
RealTek 8129/8139 fast ethernet NICs including the following:
|
|
Allied Telesyn AT2550
|
|
Allied Telesyn AT2500TX
|
|
Genius GF100TXR (RTL8139)
|
|
NDC Communications NE100TX-E
|
|
OvisLink LEF-8129TX
|
|
OvisLink LEF-8139TX
|
|
Netronix Inc. EA-1210 NetEther 10/100
|
|
KTX-9130TX 10/100 Fast Ethernet
|
|
Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?)
|
|
SMC EZ Card 10/100 PCI 1211-TX
|
|
|
|
Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following:
|
|
LinkSys EtherFast LNE100TX
|
|
NetGear FA310-TX Rev. D1
|
|
Matrox FastNIC 10/100
|
|
Kingston KNE110TX
|
|
|
|
Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
|
|
NDC Communications SFA100A (98713A)
|
|
CNet Pro120A (98713 or 98713A)
|
|
CNet Pro120B (98715)
|
|
SVEC PN102TX (98713)
|
|
|
|
Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following:
|
|
LinkSys EtherFast LNE100TX Version 2
|
|
|
|
Winbond W89C840F fast ethernet NICs including the following:
|
|
Trendware TE100-PCIE
|
|
|
|
VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet
|
|
NICs including the following:
|
|
Hawking Technologies PN102TX
|
|
D-Link DFE-530TX
|
|
AOpen/Acer ALN-320
|
|
|
|
Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet NICs
|
|
|
|
Sundance Technologies ST201 PCI fast ethernet NICs including
|
|
the following:
|
|
D-Link DFE-550TX
|
|
|
|
SysKonnect SK-984x PCI gigabit ethernet cards including the following:
|
|
SK-9841 1000baseLX single mode fiber, single port
|
|
SK-9842 1000baseSX multimode fiber, single port
|
|
SK-9843 1000baseLX single mode fiber, dual port
|
|
SK-9844 1000baseSX multimode fiber, dual port
|
|
|
|
Texas Instruments ThunderLAN PCI NICs, including the following:
|
|
Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
|
|
Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
|
|
Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
|
|
Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
|
|
Racore 8165 10/100baseTX
|
|
Racore 8148 10baseT/100baseTX/100baseFX multi-personality
|
|
|
|
ADMtek AL981-based PCI fast ethernet NICs
|
|
ADMtek AN985-based PCI fast ethernet NICs
|
|
ADMtek Inc. AN986-based USB ethernet NICs including the following:
|
|
LinkSys USB100TX
|
|
Billionton USB100
|
|
Melco Inc. LU-ATX
|
|
D-Link DSB-650TX
|
|
SMC 2202USB
|
|
|
|
CATC USB-EL1210A-based USB ethernet NICs including the following:
|
|
CATC Netmate
|
|
CATC Netmate II
|
|
Belkin F5U111
|
|
|
|
Kawasaki LSI KU5KUSB101B-based USB ethernet NICs including
|
|
the following:
|
|
LinkSys USB10T
|
|
Entrega NET-USB-E45
|
|
Peracom USB Ethernet Adapter
|
|
3Com 3c19250
|
|
ADS Technologies USB-10BT
|
|
ATen UC10T
|
|
Netgear EA101
|
|
D-Link DSB-650
|
|
SMC 2102USB
|
|
SMC 2104USB
|
|
Corega USB-T
|
|
|
|
ASIX Electronics AX88140A PCI NICs, including the following:
|
|
Alfa Inc. GFC2204
|
|
CNet Pro110B
|
|
|
|
DEC EtherWORKS III NICs (DE203, DE204, and DE205)
|
|
DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
|
|
DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
|
|
DEC FDDI (DEFPA/DEFEA) NICs
|
|
|
|
Davicom DM9100 and DM9102 PCI fast ethernet NICs, including the
|
|
following:
|
|
Jaton Corporation XPressNet
|
|
|
|
Efficient ENI-155p ATM PCI
|
|
|
|
FORE PCA-200E ATM PCI
|
|
|
|
Fujitsu MB86960A/MB86965A
|
|
|
|
HP PC Lan+ cards (model numbers: 27247B and 27252A).
|
|
|
|
Intel EtherExpress (not recommended due to driver instability)
|
|
Intel EtherExpress Pro/10
|
|
Intel EtherExpress Pro/100B PCI Fast Ethernet
|
|
|
|
Isolan AT 4141-0 (16 bit)
|
|
Isolink 4110 (8 bit)
|
|
|
|
Novell NE1000, NE2000, and NE2100 ethernet interface.
|
|
PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
|
|
Winbond W89C940, Surecom NE-34, VIA VT86C926.
|
|
|
|
3Com 3C501 cards
|
|
|
|
3Com 3C503 Etherlink II
|
|
|
|
3Com 3c505 Etherlink/+
|
|
|
|
3Com 3C507 Etherlink 16/TP
|
|
|
|
3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI
|
|
and EISA (Fast) Etherlink III / (Fast) Etherlink XL
|
|
|
|
3Com 3c980/3c980B Fast Etherlink XL server adapter
|
|
|
|
3Com 3cSOHO100-TX OfficeConnect adapter
|
|
|
|
Toshiba ethernet cards
|
|
|
|
PCMCIA ethernet cards from IBM and National Semiconductor are also
|
|
supported.
|
|
|
|
Note that NO token ring cards are supported at this time as we're
|
|
still waiting for someone to donate a driver for one of them. Any
|
|
takers?
|
|
|
|
|
|
4.3. USB
|
|
---- ---
|
|
|
|
A range of USB peripherals are supported. Owing to the generic nature
|
|
of most USB devices, with some exceptions any device of a given class
|
|
will be supported even if not explicitly listed here.
|
|
|
|
USB keyboards.
|
|
|
|
USB mice.
|
|
|
|
USB printers and USB to parallel printer conversion cables.
|
|
|
|
USB hubs.
|
|
|
|
|
|
Motherboards chipsets:
|
|
|
|
ALi Aladdin-V.
|
|
|
|
Intel 82371SB (PIIX3).
|
|
Intel 82371AB and EB chipsets (PIIX4).
|
|
|
|
NEC uPD 9210 Host Controller.
|
|
|
|
VIA 83C572 USB Host Controller
|
|
|
|
and any other UHCI or OHCI compliant motherboard chipset (no exceptions
|
|
known).
|
|
|
|
|
|
PCI plug-in USB host controllers:
|
|
|
|
ADS Electronics PCI plug-in card (2 ports).
|
|
|
|
Entrega PCI plug-in card (4 ports).
|
|
|
|
|
|
Specific devices reported to be working:
|
|
|
|
Agiler Mouse 29UO.
|
|
|
|
Andromeda hub.
|
|
|
|
Apple iMac mouse.
|
|
Apple iMac keyboard.
|
|
|
|
ATen parallel printer adapter.
|
|
|
|
Belkin F5U002 parallel printer adapter.
|
|
Belkin Mouse.
|
|
|
|
BTC BTC7935 keyboard with mouse port.
|
|
|
|
Cherry G81-3504 keyboard.
|
|
|
|
Chic mouse.
|
|
|
|
Cypress mouse.
|
|
|
|
Entrega USB-to-parallel printer adapter.
|
|
|
|
Genius Niche mouse.
|
|
|
|
Iomega USB Zip 100Mb.
|
|
|
|
Kensington Mouse-in-a-Box.
|
|
|
|
Logitech M2452 keyboard.
|
|
Logitech wheel mouse (3 buttons).
|
|
Logitech PS/2 / USB mouse (3 buttons).
|
|
|
|
MacAlly mouse (3 buttons).
|
|
MacAlly self powered hub (4 ports).
|
|
|
|
Microsoft IntelliMouse (3 buttons).
|
|
Microsoft keyboard.
|
|
|
|
NEC hub.
|
|
|
|
Trust Ami Mouse (3 buttons).
|
|
|
|
|
|
4.4. ISDN (European DSS1 [Q.921/Q.931] protocol)
|
|
---- -------------------------------------------
|
|
|
|
Asuscom I-IN100-ST-DV (experimental, may work)
|
|
Asuscom ISDNlink 128K PnP
|
|
|
|
AVM A1
|
|
AVM Fritz!Card classic
|
|
AVM Fritz!Card PnP
|
|
AVM Fritz!Card PCI
|
|
AVM Fritz!Card PCMCIA
|
|
|
|
Creatix ISDN-S0/8
|
|
Creatix ISDN-S0/16
|
|
Creatix ISDN-S0 PnP
|
|
|
|
Dr.Neuhaus Niccy 1008
|
|
Dr.Neuhaus Niccy 1016
|
|
Dr.Neuhaus Niccy GO@ (ISA PnP)
|
|
|
|
Dynalink IS64PH (no longer maintained)
|
|
|
|
ELSA 1000pro ISA
|
|
ELSA 1000pro PCI
|
|
ELSA PCC-16
|
|
|
|
ITK ix1 micro
|
|
ITK ix1 micro PnP
|
|
|
|
Sagem Cybermod (ISA PnP, may work)
|
|
|
|
Sedlbauer Win Speed
|
|
|
|
Siemens I-Surf 2.0
|
|
|
|
Stollmann Tina-pp (under development)
|
|
|
|
Teles S0/8
|
|
Teles S0/16
|
|
Teles S0/16.3 (the "c" Versions - like 16.3c - are unsupported !)
|
|
Teles S0 PnP (experimental, may work)
|
|
|
|
3Com/USRobotics Sportster ISDN TA intern (non-PnP version)
|
|
|
|
|
|
4.5. Misc
|
|
---- ----
|
|
|
|
AST 4 port serial card using shared IRQ.
|
|
|
|
ARNET 8 port serial card using shared IRQ.
|
|
ARNET (now Digiboard) Sync 570/i high-speed serial.
|
|
|
|
Boca BB1004 4-Port serial card (Modems NOT supported)
|
|
Boca IOAT66 6-Port serial card (Modems supported)
|
|
Boca BB1008 8-Port serial card (Modems NOT supported)
|
|
Boca BB2016 16-Port serial card (Modems supported)
|
|
|
|
Cyclades Cyclom-y Serial Board.
|
|
|
|
STB 4 port card using shared IRQ.
|
|
|
|
SDL Communications Riscom/8 Serial Board.
|
|
SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
|
|
|
|
Specialix SI/XIO/SX multiport serial cards, with both the older
|
|
SIHOST2.x and the new "enhanced" (transputer based, aka JET) host cards.
|
|
ISA, EISA and PCI are supported.
|
|
|
|
Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
|
|
ONboard 4/16 and Brumby.
|
|
|
|
HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
|
|
|
|
Bus mice
|
|
|
|
PS/2 mice
|
|
|
|
Standard PC Joystick
|
|
|
|
X-10 power controllers
|
|
|
|
GPIB and Transputer drivers.
|
|
|
|
Genius and Mustek hand scanners.
|
|
|
|
Floppy tape drives (some rather old models only, driver rather stale)
|
|
|
|
Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
|
|
(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
|
|
(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the
|
|
ISA versions of these adapters are actually PCMCIA cards combined with
|
|
an ISA to PCMCIA bridge card, so both kinds of devices work with
|
|
the same driver.
|
|
|
|
Aironet 4500/4800 series 802.11 wireless adapters. The PCI and ISA
|
|
models are supported for the Alpha architecture.
|
|
|
|
|
|
4.6. Multimedia
|
|
---- ----------
|
|
|
|
Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
|
|
and Roland MPU-401 sound cards.
|
|
(by Voxware)
|
|
|
|
SoundBlaster(including ViBRA16)
|
|
Advance Asound 100, 110 and Logic ALS120
|
|
ESS ES1868, ES1869, ES1879 and ES1888
|
|
MSS/WSS Compatible DSPs
|
|
Gravis UltraSound MAX/PnP
|
|
Trident 4DWave DX/NX
|
|
ENSONIQ AudioPCI ES1370/1371
|
|
NeoMagic 256AV/ZX
|
|
Crystal Semiconductor CS461x/462x/428x
|
|
(by newpcm)
|
|
|
|
Matrox Meteor Video frame grabber
|
|
Creative Labs Video Spigot frame grabber
|
|
Cortex1 frame grabber
|
|
Various Frame grabbers based on Brooktree Bt848 and Bt878 chip.
|