freebsd-src/sys/dev/ath/if_ath_spectral.c
2013-01-08 22:42:15 +00:00

289 lines
7.2 KiB
C

/*-
* Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Implement some basic spectral scan control logic.
*/
#include "opt_ath.h"
#include "opt_inet.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/errno.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_media.h>
#include <net/if_arp.h>
#include <net/ethernet.h> /* XXX for ether_sprintf */
#include <net80211/ieee80211_var.h>
#include <net/bpf.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif
#include <dev/ath/if_athvar.h>
#include <dev/ath/if_ath_spectral.h>
#include <dev/ath/ath_hal/ah_desc.h>
struct ath_spectral_state {
HAL_SPECTRAL_PARAM spectral_state;
/*
* Should we enable spectral scan upon
* each network interface reset/change?
*
* This is intended to allow spectral scan
* frame reporting during channel scans.
*
* Later on it can morph into a larger
* scale config method where it pushes
* a "channel scan" config into the hardware
* rather than just the spectral_state
* config.
*/
int spectral_enable_after_reset;
};
/*
* Methods which are required
*/
/*
* Attach spectral to the given interface
*/
int
ath_spectral_attach(struct ath_softc *sc)
{
struct ath_spectral_state *ss;
/*
* If spectral isn't supported, don't error - just
* quietly complete.
*/
if (! ath_hal_spectral_supported(sc->sc_ah))
return (0);
ss = malloc(sizeof(struct ath_spectral_state),
M_TEMP, M_WAITOK | M_ZERO);
if (ss == NULL) {
device_printf(sc->sc_dev, "%s: failed to alloc memory\n",
__func__);
return (-ENOMEM);
}
sc->sc_spectral = ss;
(void) ath_hal_spectral_get_config(sc->sc_ah, &ss->spectral_state);
return (0);
}
/*
* Detach spectral from the given interface
*/
int
ath_spectral_detach(struct ath_softc *sc)
{
if (! ath_hal_spectral_supported(sc->sc_ah))
return (0);
if (sc->sc_spectral != NULL) {
free(sc->sc_spectral, M_TEMP);
}
return (0);
}
/*
* Check whether spectral needs enabling and if so,
* flip it on.
*/
int
ath_spectral_enable(struct ath_softc *sc, struct ieee80211_channel *ch)
{
struct ath_spectral_state *ss = sc->sc_spectral;
/* Default to disable spectral PHY reporting */
sc->sc_dospectral = 0;
if (ss == NULL)
return (0);
if (ss->spectral_enable_after_reset) {
ath_hal_spectral_configure(sc->sc_ah,
&ss->spectral_state);
(void) ath_hal_spectral_start(sc->sc_ah);
sc->sc_dospectral = 1;
}
return (0);
}
/*
* Handle ioctl requests from the diagnostic interface.
*
* The initial part of this code resembles ath_ioctl_diag();
* it's likely a good idea to reduce duplication between
* these two routines.
*/
int
ath_ioctl_spectral(struct ath_softc *sc, struct ath_diag *ad)
{
unsigned int id = ad->ad_id & ATH_DIAG_ID;
void *indata = NULL;
void *outdata = NULL;
u_int32_t insize = ad->ad_in_size;
u_int32_t outsize = ad->ad_out_size;
int error = 0;
HAL_SPECTRAL_PARAM peout;
HAL_SPECTRAL_PARAM *pe;
struct ath_spectral_state *ss = sc->sc_spectral;
int val;
if (! ath_hal_spectral_supported(sc->sc_ah))
return (EINVAL);
if (ad->ad_id & ATH_DIAG_IN) {
/*
* Copy in data.
*/
indata = malloc(insize, M_TEMP, M_NOWAIT);
if (indata == NULL) {
error = ENOMEM;
goto bad;
}
error = copyin(ad->ad_in_data, indata, insize);
if (error)
goto bad;
}
if (ad->ad_id & ATH_DIAG_DYN) {
/*
* Allocate a buffer for the results (otherwise the HAL
* returns a pointer to a buffer where we can read the
* results). Note that we depend on the HAL leaving this
* pointer for us to use below in reclaiming the buffer;
* may want to be more defensive.
*/
outdata = malloc(outsize, M_TEMP, M_NOWAIT);
if (outdata == NULL) {
error = ENOMEM;
goto bad;
}
}
switch (id) {
case SPECTRAL_CONTROL_GET_PARAMS:
memset(&peout, 0, sizeof(peout));
outsize = sizeof(HAL_SPECTRAL_PARAM);
ath_hal_spectral_get_config(sc->sc_ah, &peout);
pe = (HAL_SPECTRAL_PARAM *) outdata;
memcpy(pe, &peout, sizeof(*pe));
break;
case SPECTRAL_CONTROL_SET_PARAMS:
if (insize < sizeof(HAL_SPECTRAL_PARAM)) {
error = EINVAL;
break;
}
pe = (HAL_SPECTRAL_PARAM *) indata;
ath_hal_spectral_configure(sc->sc_ah, pe);
/* Save a local copy of the updated parameters */
ath_hal_spectral_get_config(sc->sc_ah,
&ss->spectral_state);
break;
case SPECTRAL_CONTROL_START:
ath_hal_spectral_configure(sc->sc_ah,
&ss->spectral_state);
(void) ath_hal_spectral_start(sc->sc_ah);
sc->sc_dospectral = 1;
/* XXX need to update the PHY mask in the driver */
break;
case SPECTRAL_CONTROL_STOP:
(void) ath_hal_spectral_stop(sc->sc_ah);
sc->sc_dospectral = 0;
/* XXX need to update the PHY mask in the driver */
break;
case SPECTRAL_CONTROL_ENABLE_AT_RESET:
if (insize < sizeof(int)) {
device_printf(sc->sc_dev, "%d != %d\n",
insize,
(int) sizeof(int));
error = EINVAL;
break;
}
if (indata == NULL) {
device_printf(sc->sc_dev, "indata=NULL\n");
error = EINVAL;
break;
}
val = * ((int *) indata);
if (val == 0)
ss->spectral_enable_after_reset = 0;
else
ss->spectral_enable_after_reset = 1;
break;
case SPECTRAL_CONTROL_ENABLE:
/* XXX TODO */
case SPECTRAL_CONTROL_DISABLE:
/* XXX TODO */
break;
default:
error = EINVAL;
}
if (outsize < ad->ad_out_size)
ad->ad_out_size = outsize;
if (outdata && copyout(outdata, ad->ad_out_data, ad->ad_out_size))
error = EFAULT;
bad:
if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL)
free(indata, M_TEMP);
if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL)
free(outdata, M_TEMP);
return (error);
}