freebsd-src/sys/mips/atheros
2016-04-30 14:41:18 +00:00
..
apb.c mips: for pointers replace 0 with NULL. 2016-04-15 14:26:24 +00:00
apbvar.h The AR71xx has APB interrupts in the MISC registers from 0-7, later 2014-03-16 08:39:46 +00:00
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c Reshuffle all of the DDR flush operations into a single switch/mux, 2015-07-04 03:05:57 +00:00
ar71xx_chip.h
ar71xx_cpudef.h Reshuffle all of the DDR flush operations into a single switch/mux, 2015-07-04 03:05:57 +00:00
ar71xx_ehci.c EHCI: Make core reset and port speed reading more generic. 2016-01-28 14:11:59 +00:00
ar71xx_fixup.c As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
ar71xx_fixup.h
ar71xx_gpio.c Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros. 2015-11-16 04:28:00 +00:00
ar71xx_gpiovar.h Implement GPIO_GET_BUS() method for all GPIO drivers. 2015-01-31 19:32:14 +00:00
ar71xx_macaddr.c Begin moving support for board MAC addresses over to being explicitly defined. 2015-03-28 23:40:29 +00:00
ar71xx_macaddr.h Begin moving support for board MAC addresses over to being explicitly defined. 2015-03-28 23:40:29 +00:00
ar71xx_machdep.c Populate hw.model with the CPU model information. 2015-07-14 05:14:10 +00:00
ar71xx_ohci.c Reshuffle all of the DDR flush operations into a single switch/mux, 2015-07-04 03:05:57 +00:00
ar71xx_pci.c As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_setup.c Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros. 2015-11-16 04:28:00 +00:00
ar71xx_setup.h Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros. 2015-11-16 04:28:00 +00:00
ar71xx_spi.c As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
ar71xx_wdog.c
ar71xxreg.h Add a MII mode for SGMII. 2015-03-02 01:23:59 +00:00
ar91xx_chip.c Reshuffle all of the DDR flush operations into a single switch/mux, 2015-07-04 03:05:57 +00:00
ar91xx_chip.h
ar91xxreg.h
ar724x_chip.c Reshuffle all of the DDR flush operations into a single switch/mux, 2015-07-04 03:05:57 +00:00
ar724x_chip.h
ar724x_pci.c As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
ar724xreg.h Note that the AR724x PCIe registers are actually from the PCI_CTRL 2015-03-21 05:59:45 +00:00
ar933x_chip.c Reshuffle all of the DDR flush operations into a single switch/mux, 2015-07-04 03:05:57 +00:00
ar933x_chip.h
ar933x_uart.h
ar933xreg.h
ar934x_chip.c sys: Make use of our rounddown() macro when sys/param.h is available. 2016-04-30 14:41:18 +00:00
ar934x_chip.h
ar934x_nfcreg.h Add the AR934x NAND flash controller register definitions. 2014-03-18 12:18:35 +00:00
ar934xreg.h Add AR934x specific GPIO functions and output MUX configuration. 2015-01-03 06:35:53 +00:00
files.ar71xx Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros. 2015-11-16 04:28:00 +00:00
if_arge.c As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
if_argevar.h arge: fix barrier macro. 2015-10-30 23:57:20 +00:00
pcf2123_rtc.c
pcf2123reg.h
qca953x_chip.c sys: Make use of our rounddown() macro when sys/param.h is available. 2016-04-30 14:41:18 +00:00
qca953x_chip.h Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros. 2015-11-16 04:28:00 +00:00
qca953xreg.h Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros. 2015-11-16 04:28:00 +00:00
qca955x_chip.c sys: Make use of our rounddown() macro when sys/param.h is available. 2016-04-30 14:41:18 +00:00
qca955x_chip.h Add initial Qualcomm Atheros QCA955x SoC support. 2015-01-05 02:06:26 +00:00
qca955x_pci.c As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
qca955xreg.h Oops - fix typo. 2015-07-03 07:00:24 +00:00
std.ar71xx
uart_bus_ar71xx.c
uart_bus_ar933x.c
uart_cpu_ar71xx.c
uart_cpu_ar933x.c
uart_dev_ar933x.c Add support for the uart classes to set their default register shift value. 2015-04-11 17:16:23 +00:00
uart_dev_ar933x.h