freebsd-src/sys/conf/kmod.mk
Mark Johnston 8e1a7e29b6 sanitizers: Avoid building genassym.c and genoffset.c with sanitizers
Some, particularly KASAN, may insert redzones around global symbols,
resulting in incorrect offset definitions because genassym.sh (ab)uses
symbol sizes to assign semantic meaning.

(Ideally I would be able to define this pattern in one place, but I
haven't found a way to define a GENSYM_CFLAGS that actually works for
all of the consumers (kern.post.mk, kmod.mk, sys/conf/files*).)

MFC after:	1 week
Sponsored by:	Klara, Inc.
Sponsored by:	Juniper Networks, Inc.
2024-01-12 16:09:14 -05:00

564 lines
16 KiB
Makefile

# The include file <bsd.kmod.mk> handles building and installing loadable
# kernel modules.
#
#
# +++ variables +++
#
# CLEANFILES Additional files to remove for the clean and cleandir targets.
#
# EXPORT_SYMS A list of symbols that should be exported from the module,
# or the name of a file containing a list of symbols, or YES
# to export all symbols. If not defined, no symbols are
# exported.
#
# KMOD The name of the kernel module to build.
#
# KMODDIR Base path for kernel modules (see kld(4)). [/boot/kernel]
#
# KMODOWN Module file owner. [${BINOWN}]
#
# KMODGRP Module file group. [${BINGRP}]
#
# KMODMODE Module file mode. [${BINMODE}]
#
# KMODLOAD Command to load a kernel module [/sbin/kldload]
#
# KMODUNLOAD Command to unload a kernel module [/sbin/kldunload]
#
# KMODISLOADED Command to check whether a kernel module is
# loaded [/sbin/kldstat -q -n]
#
# PROG The name of the kernel module to build.
# If not supplied, ${KMOD}.ko is used.
#
# SRCS List of source files.
#
# FIRMWS List of firmware images in format filename:shortname:version
#
# FIRMWARE_LICENSE
# Set to the name of the license the user has to agree on in
# order to use this firmware. See /usr/share/doc/legal
#
# DESTDIR The tree where the module gets installed. [not set]
#
# KERNBUILDDIR Set to the location of the kernel build directory where
# the opt_*.h files, .o's and kernel winds up.
#
# BLOB_OBJS Prebuilt binary blobs .o's from the src tree to be linked into
# the module. These are precious and not removed in make clean.
#
# +++ targets +++
#
# install:
# install the kernel module; if the Makefile
# does not itself define the target install, the targets
# beforeinstall and afterinstall may also be used to cause
# actions immediately before and after the install target
# is executed.
#
# load:
# Load a module.
#
# unload:
# Unload a module.
#
# reload:
# Unload if loaded, then load.
#
AWK?= awk
KMODLOAD?= /sbin/kldload
KMODUNLOAD?= /sbin/kldunload
KMODISLOADED?= /sbin/kldstat -q -n
OBJCOPY?= objcopy
.include "kmod.opts.mk"
.include <bsd.sysdir.mk>
.SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S .m
# amd64 uses direct linking for kmod, all others use shared binaries
.if ${MACHINE_CPUARCH} != amd64
__KLD_SHARED=yes
.else
__KLD_SHARED=no
.endif
.if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing)
CFLAGS+= -fno-strict-aliasing
.endif
WERROR?= -Werror
LINUXKPI_GENSRCS+= \
backlight_if.h \
bus_if.h \
device_if.h \
iicbus_if.h \
iicbb_if.h \
lkpi_iic_if.c \
lkpi_iic_if.h \
pci_if.h \
pci_iov_if.h \
pcib_if.h \
vnode_if.h \
usb_if.h \
opt_usb.h \
opt_stack.h
LINUXKPI_INCLUDES+= \
-I${SYSDIR}/compat/linuxkpi/common/include \
-I${SYSDIR}/compat/linuxkpi/dummy/include
CFLAGS+= ${WERROR}
CFLAGS+= -D_KERNEL
CFLAGS+= -DKLD_MODULE
.if defined(MODULE_TIED)
CFLAGS+= -DKLD_TIED
.endif
# Don't use any standard or source-relative include directories.
NOSTDINC= -nostdinc
CFLAGS:= ${CFLAGS:N-I*} ${NOSTDINC} ${INCLMAGIC} ${CFLAGS:M-I*}
.if defined(KERNBUILDDIR)
CFLAGS+= -DHAVE_KERNEL_OPTION_HEADERS -include ${KERNBUILDDIR}/opt_global.h
.else
SRCS+= opt_global.h
CFLAGS+= -include ${.OBJDIR}/opt_global.h
.endif
# Add -I paths for system headers. Individual module makefiles don't
# need any -I paths for this. Similar defaults for .PATH can't be
# set because there are no standard paths for non-headers.
CFLAGS+= -I. -I${SYSDIR} -I${SYSDIR}/contrib/ck/include
CFLAGS.gcc+= -finline-limit=${INLINE_LIMIT}
CFLAGS.gcc+= -fms-extensions
CFLAGS.gcc+= --param inline-unit-growth=100
CFLAGS.gcc+= --param large-function-growth=1000
# Disallow common variables, and if we end up with commons from
# somewhere unexpected, allocate storage for them in the module itself.
#
# -fno-common is the default for src builds, but this should be left in place
# until at least we catch up to GCC10/LLVM11 or otherwise enable -fno-common
# in <bsd.sys.mk> instead. For now, we will have duplicate -fno-common in
# CFLAGS for in-tree module builds as they will also pick it up from
# share/mk/src.sys.mk, but the following is important for out-of-tree modules
# (e.g. ports).
CFLAGS+= -fno-common
.if ${LINKER_TYPE} != "lld" || ${LINKER_VERSION} < 140000
# lld >= 14 warns that -d is deprecated, and will be removed.
LDFLAGS+= -d
.endif
LDFLAGS+= -warn-common
.if defined(LINKER_FEATURES) && ${LINKER_FEATURES:Mbuild-id}
LDFLAGS+= --build-id=sha1
.endif
CFLAGS+= ${DEBUG_FLAGS}
.if ${MACHINE_CPUARCH} == aarch64 || ${MACHINE_CPUARCH} == amd64 || \
${MACHINE_CPUARCH} == riscv
CFLAGS+= -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer
.endif
.if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "riscv" || \
${MACHINE_CPUARCH} == "powerpc" || ${MACHINE_CPUARCH} == "i386"
CFLAGS+= -fPIC
.endif
.if ${MACHINE_CPUARCH} == "aarch64"
# https://bugs.freebsd.org/264094
# lld >= 14 and recent GNU ld can relax adrp+add and adrp+ldr instructions,
# which breaks VNET.
LDFLAGS+= --no-relax
.endif
# Temporary workaround for PR 196407, which contains the fascinating details.
# Don't allow clang to use fpu instructions or registers in kernel modules.
.if ${MACHINE_CPUARCH} == arm
CFLAGS.clang+= -mno-movt
CFLAGS.clang+= -mfpu=none
CFLAGS+= -funwind-tables
.endif
.if ${MACHINE_CPUARCH} == powerpc
CFLAGS+= -mlongcall -fno-omit-frame-pointer
.if ${LINKER_TYPE} == "lld"
# TOC optimization in LLD (9.0) currently breaks kernel modules, so disable it
LDFLAGS+= --no-toc-optimize
.endif
.endif
.if defined(DEBUG) || defined(DEBUG_FLAGS)
CTFFLAGS+= -g
.endif
.if defined(FIRMWS)
${KMOD:S/$/.c/}: ${SYSDIR}/tools/fw_stub.awk
${AWK} -f ${SYSDIR}/tools/fw_stub.awk ${FIRMWS} -m${KMOD} -c${KMOD:S/$/.c/g} \
${FIRMWARE_LICENSE:C/.+/-l/}${FIRMWARE_LICENSE}
SRCS+= ${KMOD:S/$/.c/}
CLEANFILES+= ${KMOD:S/$/.c/}
.for _firmw in ${FIRMWS}
${_firmw:C/\:.*$/.fwo/:T}: ${_firmw:C/\:.*$//} ${SYSDIR}/kern/firmw.S
@${ECHO} ${_firmw:C/\:.*$//} ${.ALLSRC:M*${_firmw:C/\:.*$//}}
${CC:N${CCACHE_BIN}} -c -x assembler-with-cpp -DLOCORE \
${CFLAGS} ${WERROR} \
-DFIRMW_FILE=\""${.ALLSRC:M*${_firmw:C/\:.*$//}}"\" \
-DFIRMW_SYMBOL="${_firmw:C/\:.*$//:C/[-.\/@]/_/g}" \
${SYSDIR}/kern/firmw.S -o ${.TARGET}
OBJS+= ${_firmw:C/\:.*$/.fwo/:T}
.endfor
.endif
# Conditionally include SRCS based on kernel config options.
.for _o in ${KERN_OPTS}
SRCS+=${SRCS.${_o}}
.endfor
OBJS+= ${SRCS:N*.h:R:S/$/.o/g}
.if !defined(PROG)
PROG= ${KMOD}.ko
.endif
.if !defined(DEBUG_FLAGS) || ${MK_SPLIT_KERNEL_DEBUG} == "no"
FULLPROG= ${PROG}
.else
FULLPROG= ${PROG}.full
${PROG}: ${FULLPROG} ${PROG}.debug
${OBJCOPY} --strip-debug --add-gnu-debuglink=${PROG}.debug \
${FULLPROG} ${.TARGET}
${PROG}.debug: ${FULLPROG}
${OBJCOPY} --only-keep-debug ${FULLPROG} ${.TARGET}
.endif
.if ${__KLD_SHARED} == yes
${FULLPROG}: ${KMOD}.kld
${LD} -m ${LD_EMULATION} -Bshareable -znotext -znorelro ${_LDFLAGS} \
-o ${.TARGET} ${KMOD}.kld
.if !defined(DEBUG_FLAGS)
${OBJCOPY} --strip-debug ${.TARGET}
.endif
.endif
EXPORT_SYMS?= NO
.if ${EXPORT_SYMS} != YES
CLEANFILES+= export_syms
.endif
.if exists(${SYSDIR}/conf/ldscript.kmod.${MACHINE})
LDSCRIPT_FLAGS?= -T ${SYSDIR}/conf/ldscript.kmod.${MACHINE}
.endif
.if ${__KLD_SHARED} == yes
${KMOD}.kld: ${OBJS} ${BLOB_OBJS}
.else
${FULLPROG}: ${OBJS} ${BLOB_OBJS}
.endif
${LD} -m ${LD_EMULATION} ${_LDFLAGS} ${LDSCRIPT_FLAGS} -r \
-o ${.TARGET} ${OBJS} ${BLOB_OBJS}
.if ${MK_CTF} != "no"
${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${OBJS} ${BLOB_OBJS}
.endif
.if defined(EXPORT_SYMS)
.if ${EXPORT_SYMS} != YES
.if ${EXPORT_SYMS} == NO
:> export_syms
.elif !exists(${.CURDIR}/${EXPORT_SYMS})
printf '%s' "${EXPORT_SYMS:@s@$s${.newline}@}" > export_syms
.else
grep -v '^#' < ${EXPORT_SYMS} > export_syms
.endif
${AWK} -f ${SYSDIR}/conf/kmod_syms.awk ${.TARGET} \
export_syms | xargs -J% ${OBJCOPY} % ${.TARGET}
.endif
.endif # defined(EXPORT_SYMS)
.if defined(PREFIX_SYMS)
${AWK} -v prefix=${PREFIX_SYMS} -f ${SYSDIR}/conf/kmod_syms_prefix.awk \
${.TARGET} /dev/null | xargs -J% ${OBJCOPY} % ${.TARGET}
.endif
.if !defined(DEBUG_FLAGS) && ${__KLD_SHARED} == no
${OBJCOPY} --strip-debug ${.TARGET}
.endif
_ILINKS=machine
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
_ILINKS+=x86
.endif
.if ${MACHINE_CPUARCH} == "amd64"
_ILINKS+=i386
.endif
CLEANFILES+=${_ILINKS}
all: ${PROG}
beforedepend: ${_ILINKS}
beforebuild: ${_ILINKS}
# Ensure that the links exist without depending on it when it exists which
# causes all the modules to be rebuilt when the directory pointed to changes.
# Ensure that debug info references the path in the source tree.
.for _link in ${_ILINKS}
.if !exists(${.OBJDIR}/${_link})
OBJS_DEPEND_GUESS+= ${_link}
.endif
.if ${_link} == "machine"
CFLAGS+= -fdebug-prefix-map=./machine=${SYSDIR}/${MACHINE}/include
.else
CFLAGS+= -fdebug-prefix-map=./${_link}=${SYSDIR}/${_link}/include
.endif
.endfor
.NOPATH: ${_ILINKS}
${_ILINKS}:
@case ${.TARGET} in \
machine) \
path=${SYSDIR}/${MACHINE}/include ;; \
*) \
path=${SYSDIR}/${.TARGET:T}/include ;; \
esac ; \
path=`realpath $$path`; \
${ECHO} ${.TARGET:T} "->" $$path ; \
ln -fns $$path ${.TARGET:T}
CLEANFILES+= ${PROG} ${KMOD}.kld ${OBJS}
.if defined(DEBUG_FLAGS) && ${MK_SPLIT_KERNEL_DEBUG} != "no"
CLEANFILES+= ${FULLPROG} ${PROG}.debug
.endif
.if !target(install)
_INSTALLFLAGS:= ${INSTALLFLAGS}
.for ie in ${INSTALLFLAGS_EDIT}
_INSTALLFLAGS:= ${_INSTALLFLAGS${ie}}
.endfor
.if !target(realinstall)
KERN_DEBUGDIR?= ${DEBUGDIR}
realinstall: _kmodinstall
.ORDER: beforeinstall _kmodinstall
_kmodinstall: .PHONY
${INSTALL} -T release -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}/
.if defined(DEBUG_FLAGS) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
${INSTALL} -T dbg -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${PROG}.debug ${DESTDIR}${KERN_DEBUGDIR}${KMODDIR}/
.endif
.include <bsd.links.mk>
.if !defined(NO_XREF)
afterinstall: _kldxref
.ORDER: realinstall _kldxref
.ORDER: _installlinks _kldxref
_kldxref: .PHONY
${KLDXREF_CMD} ${DESTDIR}${KMODDIR}
.if defined(NO_ROOT) && defined(METALOG)
echo ".${DISTBASE}${KMODDIR}/linker.hints type=file mode=0644 uname=root gname=wheel" | \
cat -l >> ${METALOG}
.endif
.endif
.endif # !target(realinstall)
.endif # !target(install)
.if !target(load)
load: ${PROG} .PHONY
${KMODLOAD} -v ${.OBJDIR}/${PROG}
.endif
.if !target(unload)
unload: .PHONY
if ${KMODISLOADED} ${PROG} ; then ${KMODUNLOAD} -v ${PROG} ; fi
.endif
.if !target(reload)
reload: unload load .PHONY
.endif
.if defined(KERNBUILDDIR)
.PATH: ${KERNBUILDDIR}
CFLAGS+= -I${KERNBUILDDIR}
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
ln -sf ${KERNBUILDDIR}/${_src} ${.TARGET}
.endif
.endfor
.else
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
:> ${.TARGET}
.endif
.endfor
.endif
# Add the sanitizer C flags
CFLAGS+= ${SAN_CFLAGS}
# Add the gcov flags
CFLAGS+= ${GCOV_CFLAGS}
# Respect configuration-specific C flags.
CFLAGS+= ${ARCH_FLAGS} ${CONF_CFLAGS}
.if !empty(SRCS:Mvnode_if.c)
CLEANFILES+= vnode_if.c
vnode_if.c: ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src
${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -c
.endif
.if !empty(SRCS:Mvnode_if.h)
CLEANFILES+= vnode_if.h vnode_if_newproto.h vnode_if_typedef.h
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: ${SYSDIR}/tools/vnode_if.awk \
${SYSDIR}/kern/vnode_if.src
vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h
${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -h
vnode_if_newproto.h:
${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -p
vnode_if_typedef.h:
${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -q
.endif
# Build _if.[ch] from _if.m, and clean them when we're done.
# __MPATH defined in config.mk
_MFILES=${__MPATH:T:O}
_MPATH=${__MPATH:H:O:u}
.PATH.m: ${_MPATH}
.for _i in ${SRCS:M*_if.[ch]}
_MATCH=M${_i:R:S/$/.m/}
_MATCHES=${_MFILES:${_MATCH}}
.if !empty(_MATCHES)
CLEANFILES+= ${_i}
.endif
.endfor # _i
.m.c: ${SYSDIR}/tools/makeobjops.awk
${AWK} -f ${SYSDIR}/tools/makeobjops.awk ${.IMPSRC} -c
.m.h: ${SYSDIR}/tools/makeobjops.awk
${AWK} -f ${SYSDIR}/tools/makeobjops.awk ${.IMPSRC} -h
.for _i in mii pccard
.if !empty(SRCS:M${_i}devs.h)
CLEANFILES+= ${_i}devs.h
${_i}devs.h: ${SYSDIR}/tools/${_i}devs2h.awk ${SYSDIR}/dev/${_i}/${_i}devs
${AWK} -f ${SYSDIR}/tools/${_i}devs2h.awk ${SYSDIR}/dev/${_i}/${_i}devs
.endif
.endfor # _i
.if !empty(SRCS:Mbhnd_nvram_map.h)
CLEANFILES+= bhnd_nvram_map.h
bhnd_nvram_map.h: ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.awk \
${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \
${SYSDIR}/dev/bhnd/nvram/nvram_map
bhnd_nvram_map.h:
sh ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \
${SYSDIR}/dev/bhnd/nvram/nvram_map -h
.endif
.if !empty(SRCS:Mbhnd_nvram_map_data.h)
CLEANFILES+= bhnd_nvram_map_data.h
bhnd_nvram_map_data.h: ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.awk \
${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \
${SYSDIR}/dev/bhnd/nvram/nvram_map
bhnd_nvram_map_data.h:
sh ${SYSDIR}/dev/bhnd/tools/nvram_map_gen.sh \
${SYSDIR}/dev/bhnd/nvram/nvram_map -d
.endif
.if !empty(SRCS:Musbdevs.h)
CLEANFILES+= usbdevs.h
usbdevs.h: ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs
${AWK} -f ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs -h
.endif
.if !empty(SRCS:Musbdevs_data.h)
CLEANFILES+= usbdevs_data.h
usbdevs_data.h: ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs
${AWK} -f ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs -d
.endif
.if !empty(SRCS:Msdiodevs.h)
CLEANFILES+= sdiodevs.h
sdiodevs.h: ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs
${AWK} -f ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs -h
.endif
.if !empty(SRCS:Msdiodevs_data.h)
CLEANFILES+= sdiodevs_data.h
sdiodevs_data.h: ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs
${AWK} -f ${SYSDIR}/tools/sdiodevs2h.awk ${SYSDIR}/dev/sdio/sdiodevs -d
.endif
.if !empty(SRCS:Macpi_quirks.h)
CLEANFILES+= acpi_quirks.h
acpi_quirks.h: ${SYSDIR}/tools/acpi_quirks2h.awk ${SYSDIR}/dev/acpica/acpi_quirks
${AWK} -f ${SYSDIR}/tools/acpi_quirks2h.awk ${SYSDIR}/dev/acpica/acpi_quirks
.endif
.if !empty(SRCS:Massym.inc) || !empty(DPSRCS:Massym.inc)
CLEANFILES+= assym.inc genassym.o
DEPENDOBJS+= genassym.o
DPSRCS+= offset.inc
.endif
.if defined(MODULE_TIED)
DPSRCS+= offset.inc
.endif
.if !empty(SRCS:Moffset.inc) || !empty(DPSRCS:Moffset.inc)
CLEANFILES+= offset.inc genoffset.o
DEPENDOBJS+= genoffset.o
.endif
assym.inc: genassym.o
offset.inc: genoffset.o
assym.inc: ${SYSDIR}/kern/genassym.sh
sh ${SYSDIR}/kern/genassym.sh genassym.o > ${.TARGET}
genassym.o: ${SYSDIR}/${MACHINE}/${MACHINE}/genassym.c offset.inc
genassym.o: ${SRCS:Mopt_*.h}
${CC} -c ${CFLAGS:N-flto*:N-fno-common:N-fsanitize*:N-fno-sanitize*} -fcommon \
${SYSDIR}/${MACHINE}/${MACHINE}/genassym.c
offset.inc: ${SYSDIR}/kern/genoffset.sh genoffset.o
sh ${SYSDIR}/kern/genoffset.sh genoffset.o > ${.TARGET}
genoffset.o: ${SYSDIR}/kern/genoffset.c
genoffset.o: ${SRCS:Mopt_*.h}
${CC} -c ${CFLAGS:N-flto*:N-fno-common:N-fsanitize*:N-fno-sanitize*} -fcommon \
${SYSDIR}/kern/genoffset.c
CLEANDEPENDFILES+= ${_ILINKS}
# .depend needs include links so we remove them only together.
cleanilinks:
rm -f ${_ILINKS}
OBJS_DEPEND_GUESS+= ${SRCS:M*.h}
.if defined(KERNBUILDDIR)
OBJS_DEPEND_GUESS+= opt_global.h
.endif
ZINCDIR=${SYSDIR}/contrib/openzfs/include
OPENZFS_CFLAGS= \
-D_SYS_VMEM_H_ \
-D__KERNEL__ \
-nostdinc \
-DSMP \
-I${ZINCDIR} \
-I${ZINCDIR}/os/freebsd \
-I${ZINCDIR}/os/freebsd/spl \
-I${ZINCDIR}/os/freebsd/zfs \
-I${SYSDIR}/cddl/compat/opensolaris \
-I${SYSDIR}/cddl/contrib/opensolaris/uts/common \
-include ${ZINCDIR}/os/freebsd/spl/sys/ccompile.h
.include <bsd.dep.mk>
.include <bsd.clang-analyze.mk>
.include <bsd.obj.mk>
.include "kern.mk"