freebsd-src/sys/dev/ntb/ntb_hw/ntb_hw_plx.c
Alexander Motin 21811c24c6 Add initial support for Address Lookup Table (A-LUT).
When enabled by EEPROM, use it to relax translation address/size alignment
requirements for BAR2 window by 128 or 256 times.

MFC after:	1 week
Sponsored by:	iXsystems, Inc.
2017-10-01 09:48:31 +00:00

1002 lines
27 KiB
C

/*-
* Copyright (c) 2017 Alexander Motin <mav@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* The Non-Transparent Bridge (NTB) is a device that allows you to connect
* two or more systems using a PCI-e links, providing remote memory access.
*
* This module contains a driver for NTBs in PLX/Avago/Broadcom PCIe bridges.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/sysctl.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/bus.h>
#include <machine/intr_machdep.h>
#include <machine/resource.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include "../ntb.h"
#define PLX_MAX_BARS 4 /* There are at most 4 data BARs. */
#define PLX_NUM_SPAD 8 /* There are 8 scratchpads. */
#define PLX_NUM_SPAD_PATT 4 /* Use test pattern as 4 more. */
#define PLX_NUM_DB 16 /* There are 16 doorbells. */
struct ntb_plx_mw_info {
int mw_bar;
int mw_64bit;
int mw_rid;
struct resource *mw_res;
vm_paddr_t mw_pbase;
caddr_t mw_vbase;
vm_size_t mw_size;
vm_memattr_t mw_map_mode;
bus_addr_t mw_xlat_addr;
size_t mw_xlat_size;
};
struct ntb_plx_softc {
/* ntb.c context. Do not move! Must go first! */
void *ntb_store;
device_t dev;
struct resource *conf_res;
int conf_rid;
u_int ntx; /* NTx number within chip. */
u_int link; /* Link v/s Virtual side. */
u_int port; /* Port number within chip. */
u_int alut; /* A-LUT is enabled for NTx */
int int_rid;
struct resource *int_res;
void *int_tag;
struct ntb_plx_mw_info mw_info[PLX_MAX_BARS];
int mw_count; /* Number of memory windows. */
int spad_count1; /* Number of standard spads. */
int spad_count2; /* Number of extra spads. */
uint32_t spad_off1; /* Offset of our spads. */
uint32_t spad_off2; /* Offset of our extra spads. */
uint32_t spad_offp1; /* Offset of peer spads. */
uint32_t spad_offp2; /* Offset of peer extra spads. */
/* Parameters of window shared with peer config access in B2B mode. */
int b2b_mw; /* Shared window number. */
uint64_t b2b_off; /* Offset in shared window. */
};
#define PLX_NT0_BASE 0x3E000
#define PLX_NT1_BASE 0x3C000
#define PLX_NTX_BASE(sc) ((sc)->ntx ? PLX_NT1_BASE : PLX_NT0_BASE)
#define PLX_NTX_LINK_OFFSET 0x01000
/* Bases of NTx our/peer interface registers */
#define PLX_NTX_OUR_BASE(sc) \
(PLX_NTX_BASE(sc) + ((sc)->link ? PLX_NTX_LINK_OFFSET : 0))
#define PLX_NTX_PEER_BASE(sc) \
(PLX_NTX_BASE(sc) + ((sc)->link ? 0 : PLX_NTX_LINK_OFFSET))
/* Read/write NTx our interface registers */
#define NTX_READ(sc, reg) \
bus_read_4((sc)->conf_res, PLX_NTX_OUR_BASE(sc) + (reg))
#define NTX_WRITE(sc, reg, val) \
bus_write_4((sc)->conf_res, PLX_NTX_OUR_BASE(sc) + (reg), (val))
/* Read/write NTx peer interface registers */
#define PNTX_READ(sc, reg) \
bus_read_4((sc)->conf_res, PLX_NTX_PEER_BASE(sc) + (reg))
#define PNTX_WRITE(sc, reg, val) \
bus_write_4((sc)->conf_res, PLX_NTX_PEER_BASE(sc) + (reg), (val))
/* Read/write B2B NTx registers */
#define BNTX_READ(sc, reg) \
bus_read_4((sc)->mw_info[(sc)->b2b_mw].mw_res, \
PLX_NTX_BASE(sc) + (reg))
#define BNTX_WRITE(sc, reg, val) \
bus_write_4((sc)->mw_info[(sc)->b2b_mw].mw_res, \
PLX_NTX_BASE(sc) + (reg), (val))
#define PLX_PORT_BASE(p) ((p) << 12)
#define PLX_STATION_PORT_BASE(sc) PLX_PORT_BASE((sc)->port & ~7)
#define PLX_PORT_CONTROL(sc) (PLX_STATION_PORT_BASE(sc) + 0x208)
static int ntb_plx_init(device_t dev);
static int ntb_plx_detach(device_t dev);
static int ntb_plx_mw_set_trans_internal(device_t dev, unsigned mw_idx);
static int
ntb_plx_probe(device_t dev)
{
switch (pci_get_devid(dev)) {
case 0x87a010b5:
device_set_desc(dev, "PLX Non-Transparent Bridge NT0 Link");
return (BUS_PROBE_DEFAULT);
case 0x87a110b5:
device_set_desc(dev, "PLX Non-Transparent Bridge NT1 Link");
return (BUS_PROBE_DEFAULT);
case 0x87b010b5:
device_set_desc(dev, "PLX Non-Transparent Bridge NT0 Virtual");
return (BUS_PROBE_DEFAULT);
case 0x87b110b5:
device_set_desc(dev, "PLX Non-Transparent Bridge NT1 Virtual");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
static int
ntb_plx_init(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
uint64_t val64;
int i;
uint32_t val;
if (sc->b2b_mw >= 0) {
/* Set peer BAR0/1 size and address for B2B NTx access. */
mw = &sc->mw_info[sc->b2b_mw];
if (mw->mw_64bit) {
PNTX_WRITE(sc, 0xe4, 0x3); /* 64-bit */
val64 = 0x2000000000000000 * mw->mw_bar | 0x4;
PNTX_WRITE(sc, PCIR_BAR(0), val64);
PNTX_WRITE(sc, PCIR_BAR(0) + 4, val64 >> 32);
} else {
PNTX_WRITE(sc, 0xe4, 0x2); /* 32-bit */
val = 0x20000000 * mw->mw_bar;
PNTX_WRITE(sc, PCIR_BAR(0), val);
}
/* Set Virtual to Link address translation for B2B. */
for (i = 0; i < sc->mw_count; i++) {
mw = &sc->mw_info[i];
if (mw->mw_64bit) {
val64 = 0x2000000000000000 * mw->mw_bar;
NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, val64);
NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4 + 4, val64 >> 32);
} else {
val = 0x20000000 * mw->mw_bar;
NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, val);
}
}
/* Make sure Virtual to Link A-LUT is disabled. */
if (sc->alut)
PNTX_WRITE(sc, 0xc94, 0);
/* Enable Link Interface LUT entries 0/1 for peer 0/1. */
PNTX_WRITE(sc, 0xdb4, 0x00090001);
}
/*
* Enable Virtual Interface LUT entry 0 for 0:0.0 and
* entry 1 for our Requester ID reported by chip.
*/
val = (NTX_READ(sc, 0xc90) << 16) | 0x00010001;
NTX_WRITE(sc, sc->link ? 0xdb4 : 0xd94, val);
/* Set Link to Virtual address translation. */
for (i = 0; i < sc->mw_count; i++) {
mw = &sc->mw_info[i];
if (mw->mw_xlat_size != 0)
ntb_plx_mw_set_trans_internal(dev, i);
}
pci_enable_busmaster(dev);
if (sc->b2b_mw >= 0)
PNTX_WRITE(sc, PCIR_COMMAND, PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);
return (0);
}
static void
ntb_plx_isr(void *arg)
{
device_t dev = arg;
struct ntb_plx_softc *sc = device_get_softc(dev);
uint32_t val;
ntb_db_event((device_t)arg, 0);
if (sc->link) /* Link Interface has no Link Error registers. */
return;
val = NTX_READ(sc, 0xfe0);
if (val == 0)
return;
NTX_WRITE(sc, 0xfe0, val);
if (val & 1)
device_printf(dev, "Correctable Error\n");
if (val & 2)
device_printf(dev, "Uncorrectable Error\n");
if (val & 4) {
/* DL_Down resets link side registers, have to reinit. */
ntb_plx_init(dev);
ntb_link_event(dev);
}
if (val & 8)
device_printf(dev, "Uncorrectable Error Message Drop\n");
}
static int
ntb_plx_setup_intr(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
int error;
/*
* XXX: This hardware supports MSI, but I found it unusable.
* It generates new MSI only when doorbell register goes from
* zero, but does not generate it when another bit is set or on
* partial clear. It makes operation very racy and unreliable.
* The data book mentions some mask juggling magic to workaround
* that, but I failed to make it work.
*/
sc->int_rid = 0;
sc->int_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->int_rid, RF_SHAREABLE|RF_ACTIVE);
if (sc->int_res == NULL) {
device_printf(dev, "bus_alloc_resource failed\n");
return (ENOMEM);
}
error = bus_setup_intr(dev, sc->int_res, INTR_MPSAFE | INTR_TYPE_MISC,
NULL, ntb_plx_isr, dev, &sc->int_tag);
if (error != 0) {
device_printf(dev, "bus_setup_intr failed: %d\n", error);
return (error);
}
if (!sc->link) { /* Link Interface has no Link Error registers. */
NTX_WRITE(sc, 0xfe0, 0xf); /* Clear link interrupts. */
NTX_WRITE(sc, 0xfe4, 0x0); /* Unmask link interrupts. */
}
return (0);
}
static void
ntb_plx_teardown_intr(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
if (!sc->link) /* Link Interface has no Link Error registers. */
NTX_WRITE(sc, 0xfe4, 0xf); /* Mask link interrupts. */
if (sc->int_res) {
bus_teardown_intr(dev, sc->int_res, sc->int_tag);
bus_release_resource(dev, SYS_RES_IRQ, sc->int_rid,
sc->int_res);
}
}
static int
ntb_plx_attach(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
int error = 0, i;
uint32_t val;
char buf[32];
/* Identify what we are (what side of what NTx). */
sc->dev = dev;
val = pci_read_config(dev, 0xc8c, 4);
sc->ntx = (val & 1) != 0;
sc->link = (val & 0x80000000) != 0;
/* Get access to whole 256KB of chip configuration space via BAR0/1. */
sc->conf_rid = PCIR_BAR(0);
sc->conf_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->conf_rid, RF_ACTIVE);
if (sc->conf_res == NULL) {
device_printf(dev, "Can't allocate configuration BAR.\n");
return (ENXIO);
}
/* Identify chip port we are connected to. */
val = bus_read_4(sc->conf_res, 0x360);
sc->port = (val >> ((sc->ntx == 0) ? 8 : 16)) & 0x1f;
/* Detect A-LUT enable and size. */
val >>= 30;
sc->alut = (val == 0x3) ? 1 : ((val & (1 << sc->ntx)) ? 2 : 0);
if (sc->alut)
device_printf(dev, "%u A-LUT entries\n", 128 * sc->alut);
/* Find configured memory windows at BAR2-5. */
sc->mw_count = 0;
for (i = 2; i <= 5; i++) {
mw = &sc->mw_info[sc->mw_count];
mw->mw_bar = i;
mw->mw_rid = PCIR_BAR(mw->mw_bar);
mw->mw_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&mw->mw_rid, RF_ACTIVE);
if (mw->mw_res == NULL)
continue;
mw->mw_pbase = rman_get_start(mw->mw_res);
mw->mw_size = rman_get_size(mw->mw_res);
mw->mw_vbase = rman_get_virtual(mw->mw_res);
mw->mw_map_mode = VM_MEMATTR_UNCACHEABLE;
sc->mw_count++;
/* Skip over adjacent BAR for 64-bit BARs. */
val = pci_read_config(dev, PCIR_BAR(mw->mw_bar), 4);
if ((val & PCIM_BAR_MEM_TYPE) == PCIM_BAR_MEM_64) {
mw->mw_64bit = 1;
i++;
}
}
/* Try to identify B2B mode. */
i = 1;
snprintf(buf, sizeof(buf), "hint.%s.%d.b2b", device_get_name(dev),
device_get_unit(dev));
TUNABLE_INT_FETCH(buf, &i);
if (sc->link) {
device_printf(dev, "NTB-to-Root Port mode (Link Interface)\n");
sc->b2b_mw = -1;
} else if (i == 0) {
device_printf(dev, "NTB-to-Root Port mode (Virtual Interface)\n");
sc->b2b_mw = -1;
} else {
device_printf(dev, "NTB-to-NTB (back-to-back) mode\n");
/* We need at least one memory window for B2B peer access. */
if (sc->mw_count == 0) {
device_printf(dev, "No memory window BARs enabled.\n");
error = ENXIO;
goto out;
}
sc->b2b_mw = sc->mw_count - 1;
/* Use half of the window for B2B, but no less then 1MB. */
mw = &sc->mw_info[sc->b2b_mw];
if (mw->mw_size >= 2 * 1024 * 1024)
sc->b2b_off = mw->mw_size / 2;
else
sc->b2b_off = 0;
}
/*
* Use Physical Layer User Test Pattern as additional scratchpad.
* Make sure they are present and enabled by writing to them.
* XXX: Its a hack, but standard 8 registers are not enough.
*/
sc->spad_offp1 = sc->spad_off1 = PLX_NTX_OUR_BASE(sc) + 0xc6c;
sc->spad_offp2 = sc->spad_off2 = PLX_PORT_BASE(sc->ntx * 8) + 0x20c;
if (sc->b2b_mw >= 0) {
/* In NTB-to-NTB mode each side has own scratchpads. */
sc->spad_count1 = PLX_NUM_SPAD;
bus_write_4(sc->conf_res, sc->spad_off2, 0x12345678);
if (bus_read_4(sc->conf_res, sc->spad_off2) == 0x12345678)
sc->spad_count2 = PLX_NUM_SPAD_PATT;
} else {
/* Otherwise we have share scratchpads with the peer. */
if (sc->link) {
sc->spad_off1 += PLX_NUM_SPAD / 2 * 4;
sc->spad_off2 += PLX_NUM_SPAD_PATT / 2 * 4;
} else {
sc->spad_offp1 += PLX_NUM_SPAD / 2 * 4;
sc->spad_offp2 += PLX_NUM_SPAD_PATT / 2 * 4;
}
sc->spad_count1 = PLX_NUM_SPAD / 2;
bus_write_4(sc->conf_res, sc->spad_off2, 0x12345678);
if (bus_read_4(sc->conf_res, sc->spad_off2) == 0x12345678)
sc->spad_count2 = PLX_NUM_SPAD_PATT / 2;
}
/* Apply static part of NTB configuration. */
ntb_plx_init(dev);
/* Allocate and setup interrupts. */
error = ntb_plx_setup_intr(dev);
if (error)
goto out;
/* Attach children to this controller */
error = ntb_register_device(dev);
out:
if (error != 0)
ntb_plx_detach(dev);
return (error);
}
static int
ntb_plx_detach(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
int i;
/* Detach & delete all children */
ntb_unregister_device(dev);
/* Disable and free interrupts. */
ntb_plx_teardown_intr(dev);
/* Free memory resources. */
for (i = 0; i < sc->mw_count; i++) {
mw = &sc->mw_info[i];
bus_release_resource(dev, SYS_RES_MEMORY, mw->mw_rid,
mw->mw_res);
}
bus_release_resource(dev, SYS_RES_MEMORY, sc->conf_rid, sc->conf_res);
return (0);
}
static bool
ntb_plx_link_is_up(device_t dev, enum ntb_speed *speed, enum ntb_width *width)
{
uint16_t link;
link = pcie_read_config(dev, PCIER_LINK_STA, 2);
if (speed != NULL)
*speed = (link & PCIEM_LINK_STA_SPEED);
if (width != NULL)
*width = (link & PCIEM_LINK_STA_WIDTH) >> 4;
return ((link & PCIEM_LINK_STA_WIDTH) != 0);
}
static int
ntb_plx_link_enable(device_t dev, enum ntb_speed speed __unused,
enum ntb_width width __unused)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
uint32_t reg, val;
/* The fact that we see the Link Interface means link is enabled. */
if (sc->link) {
ntb_link_event(dev);
return (0);
}
reg = PLX_PORT_CONTROL(sc);
val = bus_read_4(sc->conf_res, reg);
if ((val & (1 << (sc->port & 7))) == 0) {
/* If already enabled, generate fake link event and exit. */
ntb_link_event(dev);
return (0);
}
val &= ~(1 << (sc->port & 7));
bus_write_4(sc->conf_res, reg, val);
return (0);
}
static int
ntb_plx_link_disable(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
uint32_t reg, val;
/* Link disable for Link Interface would be suicidal. */
if (sc->link)
return (0);
reg = PLX_PORT_CONTROL(sc);
val = bus_read_4(sc->conf_res, reg);
val |= (1 << (sc->port & 7));
bus_write_4(sc->conf_res, reg, val);
return (0);
}
static bool
ntb_plx_link_enabled(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
uint32_t reg, val;
/* The fact that we see the Link Interface means link is enabled. */
if (sc->link)
return (TRUE);
reg = PLX_PORT_CONTROL(sc);
val = bus_read_4(sc->conf_res, reg);
return ((val & (1 << (sc->port & 7))) == 0);
}
static uint8_t
ntb_plx_mw_count(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
if (sc->b2b_mw >= 0 && sc->b2b_off == 0)
return (sc->mw_count - 1); /* B2B consumed whole window. */
return (sc->mw_count);
}
static int
ntb_plx_mw_get_range(device_t dev, unsigned mw_idx, vm_paddr_t *base,
caddr_t *vbase, size_t *size, size_t *align, size_t *align_size,
bus_addr_t *plimit)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
size_t off;
if (mw_idx >= sc->mw_count)
return (EINVAL);
off = 0;
if (mw_idx == sc->b2b_mw) {
KASSERT(sc->b2b_off != 0,
("user shouldn't get non-shared b2b mw"));
off = sc->b2b_off;
}
mw = &sc->mw_info[mw_idx];
/* Local to remote memory window parameters. */
if (base != NULL)
*base = mw->mw_pbase + off;
if (vbase != NULL)
*vbase = mw->mw_vbase + off;
if (size != NULL)
*size = mw->mw_size - off;
/*
* Remote to local memory window translation address alignment.
* Translation address has to be aligned to the BAR size, but A-LUT
* entries re-map addresses can be aligned to 1/128 or 1/256 of it.
* XXX: In B2B mode we can change BAR size (and so alignmet) live,
* but there is no way to report it here, so report safe value.
*/
if (align != NULL) {
if (sc->alut && mw->mw_bar == 2)
*align = (mw->mw_size - off) / 128 / sc->alut;
else
*align = mw->mw_size - off;
}
/*
* Remote to local memory window size alignment.
* The chip has no limit registers, but A-LUT, when available, allows
* access control with granularity of 1/128 or 1/256 of the BAR size.
* XXX: In B2B case we can change BAR size live, but there is no way
* to report it, so report half of the BAR size, that should be safe.
* In non-B2B case there is no control at all, so report the BAR size.
*/
if (align_size != NULL) {
if (sc->alut && mw->mw_bar == 2)
*align_size = (mw->mw_size - off) / 128 / sc->alut;
else if (sc->b2b_mw >= 0)
*align_size = (mw->mw_size - off) / 2;
else
*align_size = mw->mw_size - off;
}
/* Remote to local memory window translation address upper limit. */
if (plimit != NULL)
*plimit = mw->mw_64bit ? BUS_SPACE_MAXADDR :
BUS_SPACE_MAXADDR_32BIT;
return (0);
}
static int
ntb_plx_mw_set_trans_internal(device_t dev, unsigned mw_idx)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
uint64_t addr, eaddr, off, size, bsize, esize, val64;
uint32_t val;
int i;
mw = &sc->mw_info[mw_idx];
addr = mw->mw_xlat_addr;
size = mw->mw_xlat_size;
off = 0;
if (mw_idx == sc->b2b_mw) {
off = sc->b2b_off;
KASSERT(off != 0, ("user shouldn't get non-shared b2b mw"));
/*
* While generally we can set any BAR size on link side,
* for B2B shared window we can't go above preconfigured
* size due to BAR address alignment requirements.
*/
if (size > mw->mw_size - off)
return (EINVAL);
}
if (size > 0) {
/* Round BAR size to next power of 2 or at least 1MB. */
bsize = size;
if (!powerof2(bsize))
bsize = 1LL << flsll(bsize);
if (bsize < 1024 * 1024)
bsize = 1024 * 1024;
/* A-LUT has 128 or 256 times better granularity. */
esize = bsize;
if (sc->alut && mw->mw_bar == 2)
esize /= 128 * sc->alut;
/* addr should be aligned to BAR or A-LUT element size. */
if ((addr & (esize - 1)) != 0)
return (EINVAL);
} else
esize = bsize = 0;
if (mw->mw_64bit) {
if (sc->b2b_mw >= 0) {
/* Set Link Interface BAR size and enable/disable it. */
val64 = 0;
if (bsize > 0)
val64 = (~(bsize - 1) & ~0xfffff);
val64 |= 0xc;
PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4, val64);
PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4 + 4, val64 >> 32);
/* Set Link Interface BAR address. */
val64 = 0x2000000000000000 * mw->mw_bar + off;
PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar), val64);
PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar) + 4, val64 >> 32);
}
/* Set Virtual Interface BARs address translation */
PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, addr);
PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4 + 4, addr >> 32);
} else {
/* Make sure we fit into 32-bit address space. */
if ((addr & UINT32_MAX) != addr)
return (ERANGE);
if (((addr + bsize) & UINT32_MAX) != (addr + bsize))
return (ERANGE);
if (sc->b2b_mw >= 0) {
/* Set Link Interface BAR size and enable/disable it. */
val = 0;
if (bsize > 0)
val = (~(bsize - 1) & ~0xfffff);
PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4, val);
/* Set Link Interface BAR address. */
val64 = 0x20000000 * mw->mw_bar + off;
PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar), val64);
}
/* Set Virtual Interface BARs address translation */
PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, addr);
}
/* Configure and enable Link to Virtual A-LUT if we need it. */
if (sc->alut && mw->mw_bar == 2 &&
((addr & (bsize - 1)) != 0 || size != bsize)) {
eaddr = addr;
for (i = 0; i < 128 * sc->alut; i++) {
val = sc->link ? 0 : 1;
if (sc->alut == 1)
val += 2 * sc->ntx;
val *= 0x1000 * sc->alut;
val += 0x38000 + i * 4 + (i >= 128 ? 0x0e00 : 0);
bus_write_4(sc->conf_res, val, eaddr);
bus_write_4(sc->conf_res, val + 0x400, eaddr >> 32);
bus_write_4(sc->conf_res, val + 0x800,
(eaddr < addr + size) ? 0x3 : 0);
eaddr += esize;
}
NTX_WRITE(sc, 0xc94, 0x10000000);
} else if (sc->alut && mw->mw_bar == 2)
NTX_WRITE(sc, 0xc94, 0);
return (0);
}
static int
ntb_plx_mw_set_trans(device_t dev, unsigned mw_idx, bus_addr_t addr, size_t size)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
if (mw_idx >= sc->mw_count)
return (EINVAL);
mw = &sc->mw_info[mw_idx];
mw->mw_xlat_addr = addr;
mw->mw_xlat_size = size;
return (ntb_plx_mw_set_trans_internal(dev, mw_idx));
}
static int
ntb_plx_mw_clear_trans(device_t dev, unsigned mw_idx)
{
return (ntb_plx_mw_set_trans(dev, mw_idx, 0, 0));
}
static int
ntb_plx_mw_get_wc(device_t dev, unsigned idx, vm_memattr_t *mode)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
if (idx >= sc->mw_count)
return (EINVAL);
mw = &sc->mw_info[idx];
*mode = mw->mw_map_mode;
return (0);
}
static int
ntb_plx_mw_set_wc(device_t dev, unsigned idx, vm_memattr_t mode)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
uint64_t off;
int rc;
if (idx >= sc->mw_count)
return (EINVAL);
mw = &sc->mw_info[idx];
if (mw->mw_map_mode == mode)
return (0);
off = 0;
if (idx == sc->b2b_mw) {
KASSERT(sc->b2b_off != 0,
("user shouldn't get non-shared b2b mw"));
off = sc->b2b_off;
}
rc = pmap_change_attr((vm_offset_t)mw->mw_vbase + off,
mw->mw_size - off, mode);
if (rc == 0)
mw->mw_map_mode = mode;
return (rc);
}
static uint8_t
ntb_plx_spad_count(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
return (sc->spad_count1 + sc->spad_count2);
}
static int
ntb_plx_spad_write(device_t dev, unsigned int idx, uint32_t val)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
u_int off;
if (idx >= sc->spad_count1 + sc->spad_count2)
return (EINVAL);
if (idx < sc->spad_count1)
off = sc->spad_off1 + idx * 4;
else
off = sc->spad_off2 + (idx - sc->spad_count1) * 4;
bus_write_4(sc->conf_res, off, val);
return (0);
}
static void
ntb_plx_spad_clear(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
int i;
for (i = 0; i < sc->spad_count1 + sc->spad_count2; i++)
ntb_plx_spad_write(dev, i, 0);
}
static int
ntb_plx_spad_read(device_t dev, unsigned int idx, uint32_t *val)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
u_int off;
if (idx >= sc->spad_count1 + sc->spad_count2)
return (EINVAL);
if (idx < sc->spad_count1)
off = sc->spad_off1 + idx * 4;
else
off = sc->spad_off2 + (idx - sc->spad_count1) * 4;
*val = bus_read_4(sc->conf_res, off);
return (0);
}
static int
ntb_plx_peer_spad_write(device_t dev, unsigned int idx, uint32_t val)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
u_int off;
if (idx >= sc->spad_count1 + sc->spad_count2)
return (EINVAL);
if (idx < sc->spad_count1)
off = sc->spad_offp1 + idx * 4;
else
off = sc->spad_offp2 + (idx - sc->spad_count1) * 4;
if (sc->b2b_mw >= 0)
bus_write_4(sc->mw_info[sc->b2b_mw].mw_res, off, val);
else
bus_write_4(sc->conf_res, off, val);
return (0);
}
static int
ntb_plx_peer_spad_read(device_t dev, unsigned int idx, uint32_t *val)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
u_int off;
if (idx >= sc->spad_count1 + sc->spad_count2)
return (EINVAL);
if (idx < sc->spad_count1)
off = sc->spad_offp1 + idx * 4;
else
off = sc->spad_offp2 + (idx - sc->spad_count1) * 4;
if (sc->b2b_mw >= 0)
*val = bus_read_4(sc->mw_info[sc->b2b_mw].mw_res, off);
else
*val = bus_read_4(sc->conf_res, off);
return (0);
}
static uint64_t
ntb_plx_db_valid_mask(device_t dev)
{
return ((1LL << PLX_NUM_DB) - 1);
}
static int
ntb_plx_db_vector_count(device_t dev)
{
return (1);
}
static uint64_t
ntb_plx_db_vector_mask(device_t dev, uint32_t vector)
{
if (vector > 0)
return (0);
return ((1LL << PLX_NUM_DB) - 1);
}
static void
ntb_plx_db_clear(device_t dev, uint64_t bits)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
NTX_WRITE(sc, sc->link ? 0xc60 : 0xc50, bits);
}
static void
ntb_plx_db_clear_mask(device_t dev, uint64_t bits)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
NTX_WRITE(sc, sc->link ? 0xc68 : 0xc58, bits);
}
static uint64_t
ntb_plx_db_read(device_t dev)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
return (NTX_READ(sc, sc->link ? 0xc5c : 0xc4c));
}
static void
ntb_plx_db_set_mask(device_t dev, uint64_t bits)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
NTX_WRITE(sc, sc->link ? 0xc64 : 0xc54, bits);
}
static int
ntb_plx_peer_db_addr(device_t dev, bus_addr_t *db_addr, vm_size_t *db_size)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
struct ntb_plx_mw_info *mw;
KASSERT((db_addr != NULL && db_size != NULL), ("must be non-NULL"));
if (sc->b2b_mw >= 0) {
mw = &sc->mw_info[sc->b2b_mw];
*db_addr = (uint64_t)mw->mw_pbase + PLX_NTX_BASE(sc) + 0xc4c;
} else {
*db_addr = rman_get_start(sc->conf_res) + PLX_NTX_BASE(sc);
*db_addr += sc->link ? 0xc4c : 0xc5c;
}
*db_size = 4;
return (0);
}
static void
ntb_plx_peer_db_set(device_t dev, uint64_t bit)
{
struct ntb_plx_softc *sc = device_get_softc(dev);
if (sc->b2b_mw >= 0)
BNTX_WRITE(sc, 0xc4c, bit);
else
NTX_WRITE(sc, sc->link ? 0xc4c : 0xc5c, bit);
}
static device_method_t ntb_plx_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ntb_plx_probe),
DEVMETHOD(device_attach, ntb_plx_attach),
DEVMETHOD(device_detach, ntb_plx_detach),
/* Bus interface */
DEVMETHOD(bus_child_location_str, ntb_child_location_str),
DEVMETHOD(bus_print_child, ntb_print_child),
/* NTB interface */
DEVMETHOD(ntb_link_is_up, ntb_plx_link_is_up),
DEVMETHOD(ntb_link_enable, ntb_plx_link_enable),
DEVMETHOD(ntb_link_disable, ntb_plx_link_disable),
DEVMETHOD(ntb_link_enabled, ntb_plx_link_enabled),
DEVMETHOD(ntb_mw_count, ntb_plx_mw_count),
DEVMETHOD(ntb_mw_get_range, ntb_plx_mw_get_range),
DEVMETHOD(ntb_mw_set_trans, ntb_plx_mw_set_trans),
DEVMETHOD(ntb_mw_clear_trans, ntb_plx_mw_clear_trans),
DEVMETHOD(ntb_mw_get_wc, ntb_plx_mw_get_wc),
DEVMETHOD(ntb_mw_set_wc, ntb_plx_mw_set_wc),
DEVMETHOD(ntb_spad_count, ntb_plx_spad_count),
DEVMETHOD(ntb_spad_clear, ntb_plx_spad_clear),
DEVMETHOD(ntb_spad_write, ntb_plx_spad_write),
DEVMETHOD(ntb_spad_read, ntb_plx_spad_read),
DEVMETHOD(ntb_peer_spad_write, ntb_plx_peer_spad_write),
DEVMETHOD(ntb_peer_spad_read, ntb_plx_peer_spad_read),
DEVMETHOD(ntb_db_valid_mask, ntb_plx_db_valid_mask),
DEVMETHOD(ntb_db_vector_count, ntb_plx_db_vector_count),
DEVMETHOD(ntb_db_vector_mask, ntb_plx_db_vector_mask),
DEVMETHOD(ntb_db_clear, ntb_plx_db_clear),
DEVMETHOD(ntb_db_clear_mask, ntb_plx_db_clear_mask),
DEVMETHOD(ntb_db_read, ntb_plx_db_read),
DEVMETHOD(ntb_db_set_mask, ntb_plx_db_set_mask),
DEVMETHOD(ntb_peer_db_addr, ntb_plx_peer_db_addr),
DEVMETHOD(ntb_peer_db_set, ntb_plx_peer_db_set),
DEVMETHOD_END
};
static DEFINE_CLASS_0(ntb_hw, ntb_plx_driver, ntb_plx_methods,
sizeof(struct ntb_plx_softc));
DRIVER_MODULE(ntb_hw_plx, pci, ntb_plx_driver, ntb_hw_devclass, NULL, NULL);
MODULE_DEPEND(ntb_hw_plx, ntb, 1, 1, 1);
MODULE_VERSION(ntb_hw_plx, 1);