mirror of
https://github.com/freebsd/freebsd-src
synced 2024-09-06 17:18:32 +00:00
![]() This is intended to be used with the upcoming ice 1.39.13-k driver update, but is still backwards compatible with previous versions of the driver. Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 3 days Sponsored by: Intel Corporation |
||
---|---|---|
.. | ||
ice-1.3.36.0.pkg | ||
LICENSE | ||
README |
OS Default Dynamic Device Personalization (DDP) Package ====================================================================== May 12, 2022 Contents ======== - Overview - Supported Operating Systems - Safe Mode - Notes - Installation - Troubleshooting - Legal Overview ======== Devices based on the Intel(R) Ethernet 800 Series require a Dynamic Device Personalization (DDP) package file to enable advanced features (such as dynamic tunneling, Intel(R) Ethernet Flow Director, RSS, and ADQ). DDP allows you to change the packet processing pipeline of a device by applying a profile package to the device at runtime. Profiles can be used to, for example, add support for new protocols, change existing protocols, or change default settings. DDP profiles can also be rolled back without rebooting the system. The DDP package loads during device initialization or driver runtime, depending on the operating system. The driver checks to see if the DDP package is present and compatible. If this file exists, the driver will load it into the device. If the DDP package file is missing or incompatible with the driver, the driver will go into Safe Mode where it will use the configuration contained in the device's NVM. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for more information on Safe Mode. A general-purpose, default DDP package is automatically installed with all supported Intel Ethernet 800 Series drivers on supported operating systems. Additional DDP packages are available to address needs for specific market segments or targeted solutions. The default DDP package supports the following: - MAC - EtherType - VLAN - IPv4 - IPv6 - TCP - ARP - UDP - SCTP - ICMP - ICMPv6 - CTRL - LLDP - VXLAN-GPE - VXLAN (non-GPE) - Geneve - GRE - NVGRE - RoCEv2 - MPLS (up to 5 consecutive MPLS labels in the outermost Layer 2 header group) Supported Operating Systems =========================== This DDP package is supported on the following operating systems: - Microsoft* Windows Server* - Linux* - FreeBSD* - VMware* ESXi* Refer to the Intel(R) Ethernet Adapters and Devices User Guide for currently supported versions of these operating systems. Safe Mode ========= Safe Mode disables advanced and performance features, and supports only basic traffic and minimal functionality, such as updating the NVM or downloading a new driver or DDP package. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for more details on DDP and Safe Mode. Notes ===== - In Linux, FreeBSD, and Windows, you cannot update the DDP package if any PF drivers are already loaded. To overwrite a package, unload all PFs and then reload the driver with the new package. - In ESXi, use esxcli to load and unload DDP packages for specific market segments during driver runtime. - In FreeBSD and Windows, you can only use one DDP package per driver, even if you have more than one device installed that uses the driver. - In Linux, FreeBSD, and Windows, only the first loaded PF per device can download a package for that device. In ESXi, you can load different DDP packages for different PFs associated with a device. - If you are using DPDK, see the DPDK documentation at https://www.dpdk.org/ for installation instructions and more information. Installation ============ Microsoft Windows ----------------- TO INSTALL THE OS DEFAULT DDP PACKAGE: The default DDP package is installed as part of the driver binary. You don't need to take additional steps to install the DDP package file. FreeBSD ------- TO INSTALL THE OS DEFAULT DDP PACKAGE: The FreeBSD driver automatically installs the default DDP package file during driver installation. See the base driver README for general installation and building instructions. The DDP package loads during device initialization. The driver looks for the ice_ddp module and checks that it contains a valid DDP package file. NOTE: It's important to do 'make install' during initial ice driver installation so that the driver loads the DDP package automatically. Linux ----- TO INSTALL THE OS DEFAULT DDP PACKAGE: The Linux driver automatically installs the default DDP package file during driver installation. Read the base driver README for general installation and building instructions. The DDP package loads during device initialization. The driver looks for intel/ice/ddp/ice.pkg in your firmware root (typically /lib/firmware/ or /lib/firmware/updates/) and checks that it contains a valid DDP package file. The ice.pkg file is a symbolic link to the default DDP package file installed by the linux-firmware software package or the out-of-tree driver installation. TO INSTALL A DDP PACKAGE FOR SPECIFIC MARKET SEGMENTS: You can install specific DDP package files for different physical devices in the same system. To install a specific DDP package: 1. Download the DDP package file (ice-x.x.x.x.zip) you want for your device. In addition to licensing information and this README, this zip file contains the following files: ice-x.x.x.x.pkg ice.pkg NOTE: The ice.pkg file is a Linux symbolic link file pointing to ice-x.x.x.x.pkg (in the same path). 2. Rename the ice-x.x.x.x.pkg file as ice-xxxxxxxxxxxxxxxx.pkg, where 'xxxxxxxxxxxxxxxx' is the unique 64-bit PCI Express device serial number (in hex) of the device you want the package downloaded on. The filename must include the complete serial number (including leading zeros) and be all lowercase. For example, if the 64-bit serial number is b887a3ffffca0568, then the file name would be ice-b887a3ffffca0568.pkg. To find the serial number from the PCI bus address, you can use the following command: # lspci -vv -s af:00.0 | grep -i Serial Capabilities: [150 v1] Device Serial Number b8-87-a3-ff-ff-ca-05-68 You can use the following command to format the serial number without the dashes: # lspci -vv -s af:00.0 | grep -i Serial | awk '{print $7}' | sed s/-//g b887a3ffffca0568 3. Copy the renamed DDP package file to /lib/firmware/updates/intel/ice/ddp/. If the directory does not yet exist, create it before copying the file. 4. Unload all of the PFs on the device. 5. Reload the driver with the new package. NOTE: The presence of a device-specific DDP package file overrides the loading of the default DDP package file. ESX --- TO INSTALL THE OS DEFAULT DDP PACKAGE: The default DDP package is installed as part of the driver binary. You don't need to take additional steps to install the DDP package file. TO INSTALL A DDP PACKAGE FOR SPECIFIC MARKET SEGMENTS: You must first install the Intel(R) ESXCLI Plug-In for Managing Intel(R) Ethernet Network Adapters to be able to install and load market-specific DDP packages. Download it from: https://www.intel.com/content/www/us/en/download/19380/intel-esxcli-plug-in-for- managing-intel-ethernet-network-adapters.html NOTE: ESXi support for DDP packages for specific market segments requires the following: - OS: ESXi 6.7 or higher - Driver: icen 1.9.1.x or higher - Tool: intnet 1.8.3.x or higher To install and load this DDP package: 1. Download and install the esxcli plug-in from the URL above. 2. Download the DDP package. 3. Copy the DDP package file to the following location: /store/intel/icen/ddp/. If the directory does not yet exist, create it before copying the file. 4. From the command prompt, run the following command to load the DDP package: # esxcli intnet ddp load -n <vmnicX> -p <ddp_file_name> -f Where: <vmnicX> = the name of the NIC <ddp_file_name> = the name of the DDP package to load -f = forces the package to load NOTE: This operation will cause the driver to reset. 5. Wait for the load result status. To list all active DDP packages for all virtual NICs, run the following: # esxcli intnet ddp list To unload (roll back) a DDP package, run the following: # esxcli intnet ddp rollback -n <vmnicX> -f NOTE: This operation will cause the driver to reset. Troubleshooting =============== Microsoft Windows ----------------- If you encounter issues with the DDP package file, download the latest driver. FreeBSD ------- If you encounter issues with the DDP package file, you may need to download an updated driver or ice_ddp module. See the log messages for more information. Linux ----- If you encounter issues with the DDP package file, you may need to download an updated driver or DDP package file. Refer to the log messages for more information. ESX --- If you encounter issues with the DDP package file, download the latest driver. Legal / Disclaimers =================== Copyright (c) 2019 - 2022, Intel Corporation. Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. *Other names and brands may be claimed as the property of others. This software and the related documents are Intel copyrighted materials, and your use of them is governed by the express license under which they were provided to you ("License"). Unless the License provides otherwise, you may not use, modify, copy, publish, distribute, disclose or transmit this software or the related documents without Intel's prior written permission. This software and the related documents are provided as is, with no express or implied warranties, other than those that are expressly stated in the License.