freebsd-src/sys/netinet6/in6.h
Yoshinobu Inoue 1aa540eb03 Forbid include of soem inet6 header files from wrong place
KAME put INET6 related stuff into sys/netinet6 dir, but IPv6
  standard API(RFC2553) require following files to be under sys/netinet.
    netinet/ip6.h
    netinet/icmp6.h
  Now those header files just include each following files.
    netinet6/ip6.h
    netinet6/icmp6.h

  Also KAME has netinet6/in6.h for easy INET6 common defs
  sharing between different BSDs, but RFC2553 requires only
  netinet/in.h should be included from userland.
  So netinet/in.h also includes netinet6/in6.h inside.

  To keep apps portability, apps should not directly include
  above files from netinet6 dir.
  Ideally, all contents of,
    netinet6/ip6.h
    netinet6/icmp6.h
    netinet6/in6.h
  should be moved into
    netinet/ip6.h
    netinet/icmp6.h
    netinet/in.h
  but to avoid big changes in this stage, add some hack, that
    -Put some special macro define into those files under neitnet
    -Let files under netinet6 cause error if it is included
     from some apps, and, if the specifal macro define is not
     defined.
     (which should have been defined if files under netinet is
     included)
    -And let them print an error message which tells the
     correct name of the include file to be included.

  Also fix apps which includes invalid header files.

Approved by: jkh

Obtained from: KAME project
2000-02-10 19:33:58 +00:00

589 lines
20 KiB
C

/*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in.h 8.3 (Berkeley) 1/3/94
* $FreeBSD$
*/
#ifndef _NETINET6_IN6_H_
#define _NETINET6_IN6_H_
#if !defined(_KERNEL) && !defined(__KAME_NETINET_IN_H_INCLUDED_)
#error "do not include netinet6/in6.h directly, include netinet/in.h"
#endif
#if !defined(_XOPEN_SOURCE)
#include <sys/queue.h>
#endif
/*
* Identification of the network protocol stack
*/
#define __KAME__
#define __KAME_VERSION "SNAP 19991101"
/*
* Local port number conventions:
*
* Ports < IPPORT_RESERVED are reserved for privileged processes (e.g. root),
* unless a kernel is compiled with IPNOPRIVPORTS defined.
*
* When a user does a bind(2) or connect(2) with a port number of zero,
* a non-conflicting local port address is chosen.
*
* The default range is IPPORT_ANONMIX to IPPORT_ANONMAX, although
* that is settable by sysctl(3); net.inet.ip.anonportmin and
* net.inet.ip.anonportmax respectively.
*
* A user may set the IPPROTO_IP option IP_PORTRANGE to change this
* default assignment range.
*
* The value IP_PORTRANGE_DEFAULT causes the default behavior.
*
* The value IP_PORTRANGE_HIGH is the same as IP_PORTRANGE_DEFAULT,
* and exists only for FreeBSD compatibility purposes.
*
* The value IP_PORTRANGE_LOW changes the range to the "low" are
* that is (by convention) restricted to privileged processes.
* This convention is based on "vouchsafe" principles only.
* It is only secure if you trust the remote host to restrict these ports.
* The range is IPPORT_RESERVEDMIN to IPPORT_RESERVEDMAX.
*/
#define IPV6PORT_RESERVED 1024
#define IPV6PORT_ANONMIN 49152
#define IPV6PORT_ANONMAX 65535
#define IPV6PORT_RESERVEDMIN 600
#define IPV6PORT_RESERVEDMAX (IPV6PORT_RESERVED-1)
/*
* IPv6 address
*/
struct in6_addr {
union {
u_int8_t __u6_addr8[16];
u_int16_t __u6_addr16[8];
u_int32_t __u6_addr32[4];
} __u6_addr; /* 128-bit IP6 address */
};
#define s6_addr __u6_addr.__u6_addr8
#ifdef _KERNEL /*XXX nonstandard*/
#define s6_addr8 __u6_addr.__u6_addr8
#define s6_addr16 __u6_addr.__u6_addr16
#define s6_addr32 __u6_addr.__u6_addr32
#endif
#define INET6_ADDRSTRLEN 46
/*
* Socket address for IPv6
*/
#if !defined(_XOPEN_SOURCE)
#define SIN6_LEN
#endif
struct sockaddr_in6 {
u_char sin6_len; /* length of this struct(sa_family_t)*/
u_char sin6_family; /* AF_INET6 (sa_family_t) */
u_int16_t sin6_port; /* Transport layer port # (in_port_t)*/
u_int32_t sin6_flowinfo; /* IP6 flow information */
struct in6_addr sin6_addr; /* IP6 address */
u_int32_t sin6_scope_id; /* intface scope id */
};
/*
* Local definition for masks
*/
#ifdef _KERNEL /*XXX nonstandard*/
#define IN6MASK0 {{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}}
#define IN6MASK32 {{{ 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6MASK64 {{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6MASK96 {{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6MASK128 {{{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}}
#endif
#ifdef _KERNEL
extern const struct in6_addr in6mask0;
extern const struct in6_addr in6mask32;
extern const struct in6_addr in6mask64;
extern const struct in6_addr in6mask96;
extern const struct in6_addr in6mask128;
#endif /* _KERNEL */
/*
* Macros started with IPV6_ADDR is KAME local
*/
#ifdef _KERNEL /*XXX nonstandard*/
#if BYTE_ORDER == BIG_ENDIAN
#define IPV6_ADDR_INT32_ONE 1
#define IPV6_ADDR_INT32_TWO 2
#define IPV6_ADDR_INT32_MNL 0xff010000
#define IPV6_ADDR_INT32_MLL 0xff020000
#define IPV6_ADDR_INT32_SMP 0x0000ffff
#define IPV6_ADDR_INT16_ULL 0xfe80
#define IPV6_ADDR_INT16_USL 0xfec0
#define IPV6_ADDR_INT16_MLL 0xff02
#elif BYTE_ORDER == LITTLE_ENDIAN
#define IPV6_ADDR_INT32_ONE 0x01000000
#define IPV6_ADDR_INT32_TWO 0x02000000
#define IPV6_ADDR_INT32_MNL 0x000001ff
#define IPV6_ADDR_INT32_MLL 0x000002ff
#define IPV6_ADDR_INT32_SMP 0xffff0000
#define IPV6_ADDR_INT16_ULL 0x80fe
#define IPV6_ADDR_INT16_USL 0xc0fe
#define IPV6_ADDR_INT16_MLL 0x02ff
#endif
#endif
/*
* Definition of some useful macros to handle IP6 addresses
*/
#define IN6ADDR_ANY_INIT \
{{{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}}
#define IN6ADDR_LOOPBACK_INIT \
{{{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_NODELOCAL_ALLNODES_INIT \
{{{ 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_LINKLOCAL_ALLNODES_INIT \
{{{ 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 }}}
#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
{{{ 0xff, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02 }}}
extern const struct in6_addr in6addr_any;
extern const struct in6_addr in6addr_loopback;
extern const struct in6_addr in6addr_nodelocal_allnodes;
extern const struct in6_addr in6addr_linklocal_allnodes;
extern const struct in6_addr in6addr_linklocal_allrouters;
/*
* Equality
* NOTE: Some of kernel programming environment (for example, openbsd/sparc)
* does not supply memcmp(). For userland memcmp() is preferred as it is
* in ANSI standard.
*/
#ifdef _KERNEL
#define IN6_ARE_ADDR_EQUAL(a, b) \
(bcmp((a), (b), sizeof(struct in6_addr)) == 0)
#else
#define IN6_ARE_ADDR_EQUAL(a, b) \
(memcmp((a), (b), sizeof(struct in6_addr)) == 0)
#endif
/*
* Unspecified
*/
#define IN6_IS_ADDR_UNSPECIFIED(a) \
((*(u_int32_t *)(&(a)->s6_addr[0]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[4]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[8]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[12]) == 0))
/*
* Loopback
*/
#define IN6_IS_ADDR_LOOPBACK(a) \
((*(u_int32_t *)(&(a)->s6_addr[0]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[4]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[8]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[12]) == ntohl(1)))
/*
* IPv4 compatible
*/
#define IN6_IS_ADDR_V4COMPAT(a) \
((*(u_int32_t *)(&(a)->s6_addr[0]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[4]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[8]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[12]) != 0) && \
(*(u_int32_t *)(&(a)->s6_addr[12]) != ntohl(1)))
/*
* Mapped
*/
#define IN6_IS_ADDR_V4MAPPED(a) \
((*(u_int32_t *)(&(a)->s6_addr[0]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[4]) == 0) && \
(*(u_int32_t *)(&(a)->s6_addr[8]) == ntohl(0x0000ffff)))
/*
* KAME Scope Values
*/
#ifdef _KERNEL /*XXX nonstandard*/
#define IPV6_ADDR_SCOPE_NODELOCAL 0x01
#define IPV6_ADDR_SCOPE_LINKLOCAL 0x02
#define IPV6_ADDR_SCOPE_SITELOCAL 0x05
#define IPV6_ADDR_SCOPE_ORGLOCAL 0x08 /* just used in this file */
#define IPV6_ADDR_SCOPE_GLOBAL 0x0e
#else
#define __IPV6_ADDR_SCOPE_NODELOCAL 0x01
#define __IPV6_ADDR_SCOPE_LINKLOCAL 0x02
#define __IPV6_ADDR_SCOPE_SITELOCAL 0x05
#define __IPV6_ADDR_SCOPE_ORGLOCAL 0x08 /* just used in this file */
#define __IPV6_ADDR_SCOPE_GLOBAL 0x0e
#endif
/*
* Unicast Scope
* Note that we must check topmost 10 bits only, not 16 bits (see RFC2373).
*/
#define IN6_IS_ADDR_LINKLOCAL(a) \
(((a)->s6_addr[0] == 0xfe) && (((a)->s6_addr[1] & 0xc0) == 0x80))
#define IN6_IS_ADDR_SITELOCAL(a) \
(((a)->s6_addr[0] == 0xfe) && (((a)->s6_addr[1] & 0xc0) == 0xc0))
/*
* Multicast
*/
#define IN6_IS_ADDR_MULTICAST(a) ((a)->s6_addr[0] == 0xff)
#ifdef _KERNEL /*XXX nonstandard*/
#define IPV6_ADDR_MC_SCOPE(a) ((a)->s6_addr[1] & 0x0f)
#else
#define __IPV6_ADDR_MC_SCOPE(a) ((a)->s6_addr[1] & 0x0f)
#endif
/*
* Multicast Scope
*/
#ifdef _KERNEL /*refers nonstandard items */
#define IN6_IS_ADDR_MC_NODELOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_NODELOCAL))
#define IN6_IS_ADDR_MC_LINKLOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_LINKLOCAL))
#define IN6_IS_ADDR_MC_SITELOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_SITELOCAL))
#define IN6_IS_ADDR_MC_ORGLOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_ORGLOCAL))
#define IN6_IS_ADDR_MC_GLOBAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(IPV6_ADDR_MC_SCOPE(a) == IPV6_ADDR_SCOPE_GLOBAL))
#else
#define IN6_IS_ADDR_MC_NODELOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_NODELOCAL))
#define IN6_IS_ADDR_MC_LINKLOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_LINKLOCAL))
#define IN6_IS_ADDR_MC_SITELOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_SITELOCAL))
#define IN6_IS_ADDR_MC_ORGLOCAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_ORGLOCAL))
#define IN6_IS_ADDR_MC_GLOBAL(a) \
(IN6_IS_ADDR_MULTICAST(a) && \
(__IPV6_ADDR_MC_SCOPE(a) == __IPV6_ADDR_SCOPE_GLOBAL))
#endif
/*
* KAME Scope
*/
#ifdef _KERNEL /*nonstandard*/
#define IN6_IS_SCOPE_LINKLOCAL(a) \
((IN6_IS_ADDR_LINKLOCAL(a)) || \
(IN6_IS_ADDR_MC_LINKLOCAL(a)))
#endif
/*
* IP6 route structure
*/
#if !defined(_XOPEN_SOURCE)
struct route_in6 {
struct rtentry *ro_rt;
struct sockaddr_in6 ro_dst;
};
#endif
/*
* Options for use with [gs]etsockopt at the IPV6 level.
* First word of comment is data type; bool is stored in int.
*/
#define IPV6_OPTIONS 1 /* buf/ip6_opts; set/get IP6 options */
/* no hdrincl */
#define IPV6_SOCKOPT_RESERVED1 3 /* reserved for future use */
#define IPV6_UNICAST_HOPS 4 /* int; IP6 hops */
#define IPV6_RECVOPTS 5 /* bool; receive all IP6 opts w/dgram */
#define IPV6_RECVRETOPTS 6 /* bool; receive IP6 opts for response */
#define IPV6_RECVDSTADDR 7 /* bool; receive IP6 dst addr w/dgram */
#define IPV6_RETOPTS 8 /* ip6_opts; set/get IP6 options */
#define IPV6_MULTICAST_IF 9 /* u_char; set/get IP6 multicast i/f */
#define IPV6_MULTICAST_HOPS 10 /* u_char; set/get IP6 multicast hops */
#define IPV6_MULTICAST_LOOP 11 /* u_char; set/get IP6 multicast loopback */
#define IPV6_JOIN_GROUP 12 /* ip6_mreq; join a group membership */
#define IPV6_LEAVE_GROUP 13 /* ip6_mreq; leave a group membership */
#define IPV6_PORTRANGE 14 /* int; range to choose for unspec port */
#define ICMP6_FILTER 18 /* icmp6_filter; icmp6 filter */
#define IPV6_PKTINFO 19 /* bool; send/rcv if, src/dst addr */
#define IPV6_HOPLIMIT 20 /* bool; hop limit */
#define IPV6_NEXTHOP 21 /* bool; next hop addr */
#define IPV6_HOPOPTS 22 /* bool; hop-by-hop option */
#define IPV6_DSTOPTS 23 /* bool; destination option */
#define IPV6_RTHDR 24 /* bool; routing header */
#define IPV6_PKTOPTIONS 25 /* buf/cmsghdr; set/get IPv6 options */
#define IPV6_CHECKSUM 26 /* int; checksum offset for raw socket */
#define IPV6_BINDV6ONLY 27 /* bool; only bind INET6 at null bind */
/* for IPsec */
#define IPV6_IPSEC_POLICY 28 /* struct; get/set security policy */
#define IPV6_FAITH 29 /* bool; accept FAITH'ed connections */
/* for IPV6FIREWALL */
#define IPV6_FW_ADD 30 /* add a firewall rule to chain */
#define IPV6_FW_DEL 31 /* delete a firewall rule from chain */
#define IPV6_FW_FLUSH 32 /* flush firewall rule chain */
#define IPV6_FW_ZERO 33 /* clear single/all firewall counter(s) */
#define IPV6_FW_GET 34 /* get entire firewall rule chain */
#define IPV6_RTHDR_LOOSE 0 /* this hop need not be a neighbor. XXX old spec */
#define IPV6_RTHDR_STRICT 1 /* this hop must be a neighbor. XXX old spec */
#define IPV6_RTHDR_TYPE_0 0 /* IPv6 routing header type 0 */
/*
* Defaults and limits for options
*/
#define IPV6_DEFAULT_MULTICAST_HOPS 1 /* normally limit m'casts to 1 hop */
#define IPV6_DEFAULT_MULTICAST_LOOP 1 /* normally hear sends if a member */
/*
* Argument structure for IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP.
*/
struct ipv6_mreq {
struct in6_addr ipv6mr_multiaddr;
u_int ipv6mr_interface;
};
/*
* IPV6_PKTINFO: Packet information(RFC2292 sec 5)
*/
struct in6_pktinfo {
struct in6_addr ipi6_addr; /* src/dst IPv6 address */
u_int ipi6_ifindex; /* send/recv interface index */
};
/*
* Argument for IPV6_PORTRANGE:
* - which range to search when port is unspecified at bind() or connect()
*/
#define IPV6_PORTRANGE_DEFAULT 0 /* default range */
#define IPV6_PORTRANGE_HIGH 1 /* "high" - request firewall bypass */
#define IPV6_PORTRANGE_LOW 2 /* "low" - vouchsafe security */
#if !defined(_XOPEN_SOURCE)
/*
* Definitions for inet6 sysctl operations.
*
* Third level is protocol number.
* Fourth level is desired variable within that protocol.
*/
#define IPV6PROTO_MAXID (IPPROTO_PIM + 1) /* don't list to IPV6PROTO_MAX */
#define CTL_IPV6PROTO_NAMES { \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, \
{ "tcp6", CTLTYPE_NODE }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ "udp6", CTLTYPE_NODE }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, \
{ "ip6", CTLTYPE_NODE }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, \
{ "ipsec6", CTLTYPE_NODE }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ "icmp6", CTLTYPE_NODE }, \
{ 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ 0, 0 }, \
{ "pim6", CTLTYPE_NODE }, \
}
/*
* Names for IP sysctl objects
*/
#define IPV6CTL_FORWARDING 1 /* act as router */
#define IPV6CTL_SENDREDIRECTS 2 /* may send redirects when forwarding*/
#define IPV6CTL_DEFHLIM 3 /* default Hop-Limit */
#ifdef notyet
#define IPV6CTL_DEFMTU 4 /* default MTU */
#endif
#define IPV6CTL_FORWSRCRT 5 /* forward source-routed dgrams */
#define IPV6CTL_STATS 6 /* stats */
#define IPV6CTL_MRTSTATS 7 /* multicast forwarding stats */
#define IPV6CTL_MRTPROTO 8 /* multicast routing protocol */
#define IPV6CTL_MAXFRAGPACKETS 9 /* max packets reassembly queue */
#define IPV6CTL_SOURCECHECK 10 /* verify source route and intf */
#define IPV6CTL_SOURCECHECK_LOGINT 11 /* minimume logging interval */
#define IPV6CTL_ACCEPT_RTADV 12
#define IPV6CTL_KEEPFAITH 13
#define IPV6CTL_LOG_INTERVAL 14
#define IPV6CTL_HDRNESTLIMIT 15
#define IPV6CTL_DAD_COUNT 16
#define IPV6CTL_AUTO_FLOWLABEL 17
#define IPV6CTL_DEFMCASTHLIM 18
#define IPV6CTL_GIF_HLIM 19 /* default HLIM for gif encap packet */
#define IPV6CTL_KAME_VERSION 20
#define IPV6CTL_USE_DEPRECATED 21 /* use deprecated addr (RFC2462 5.5.4) */
#define IPV6CTL_RR_PRUNE 22 /* walk timer for router renumbering */
#define IPV6CTL_MAPPED_ADDR 23
/* New entries should be added here from current IPV6CTL_MAXID value. */
#define IPV6CTL_MAXID 24
#endif /* !_XOPEN_SOURCE */
/*
* Redefinition of mbuf flags
*/
#define M_ANYCAST6 M_PROTO1
#define M_AUTHIPHDR M_PROTO2
#define M_DECRYPTED M_PROTO3
#define M_LOOP M_PROTO4
#define M_AUTHIPDGM M_PROTO5
#ifdef _KERNEL
struct cmsghdr;
struct mbuf;
struct ifnet;
int in6_canforward __P((struct in6_addr *, struct in6_addr *));
int in6_cksum __P((struct mbuf *, u_int8_t, int, int));
int in6_localaddr __P((struct in6_addr *));
int in6_addrscope __P((struct in6_addr *));
struct in6_ifaddr *in6_ifawithscope __P((struct ifnet *, struct in6_addr *));
struct in6_ifaddr *in6_ifawithifp __P((struct ifnet *, struct in6_addr *));
extern void in6_if_up __P((struct ifnet *));
struct sockaddr;
void in6_sin6_2_sin __P((struct sockaddr_in *sin,
struct sockaddr_in6 *sin6));
void in6_sin_2_v4mapsin6 __P((struct sockaddr_in *sin,
struct sockaddr_in6 *sin6));
void in6_sin6_2_sin_in_sock __P((struct sockaddr *nam));
void in6_sin_2_v4mapsin6_in_sock __P((struct sockaddr **nam));
#define satosin6(sa) ((struct sockaddr_in6 *)(sa))
#define sin6tosa(sin6) ((struct sockaddr *)(sin6))
#define ifatoia6(ifa) ((struct in6_ifaddr *)(ifa))
#endif /* _KERNEL */
__BEGIN_DECLS
struct cmsghdr;
extern int inet6_option_space __P((int));
extern int inet6_option_init __P((void *, struct cmsghdr **, int));
extern int inet6_option_append __P((struct cmsghdr *, const u_int8_t *,
int, int));
extern u_int8_t *inet6_option_alloc __P((struct cmsghdr *, int, int, int));
extern int inet6_option_next __P((const struct cmsghdr *, u_int8_t **));
extern int inet6_option_find __P((const struct cmsghdr *, u_int8_t **,
int));
extern size_t inet6_rthdr_space __P((int, int));
extern struct cmsghdr *inet6_rthdr_init __P((void *, int));
extern int inet6_rthdr_add __P((struct cmsghdr *, const struct in6_addr *,
u_int));
extern int inet6_rthdr_lasthop __P((struct cmsghdr *, u_int));
extern int inet6_rthdr_segments __P((const struct cmsghdr *));
extern struct in6_addr *inet6_rthdr_getaddr __P((struct cmsghdr *, int));
extern int inet6_rthdr_getflags __P((const struct cmsghdr *, int));
__END_DECLS
#endif /* !_NETINET6_IN6_H_ */