freebsd-src/sys/dev/rtsx/rtsxreg.h

/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2006 Uwe Stuehler <uwe@openbsd.org>
 * Copyright (c) 2012 Stefan Sperling <stsp@openbsd.org>
 * Copyright (c) 2020 Henri Hennebert <hlh@restart.be>
 * All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifndef	_RTSXREG_H_
#define	_RTSXREG_H_

/* Host command buffer control register. */
#define	RTSX_HCBAR		0x00
#define	RTSX_HCBCTLR		0x04
#define	RTSX_START_CMD		(1U << 31)
#define	RTSX_HW_AUTO_RSP	(1U << 30)
#define	RTSX_STOP_CMD		(1U << 28)

/* Host data buffer control register. */
#define	RTSX_HDBAR		0x08
#define	RTSX_HDBCTLR		0x0C
#define	RTSX_TRIG_DMA		(1U << 31)
#define	RTSX_DMA_READ		(1U << 29)
#define	RTSX_STOP_DMA		(1U << 28)
#define	RTSX_ADMA_MODE		(2U << 26)

/* Interrupt pending register. */
#define	RTSX_BIPR		0x14
#define	RTSX_CMD_DONE_INT	(1U << 31)
#define	RTSX_DATA_DONE_INT	(1U << 30)
#define	RTSX_TRANS_OK_INT	(1U << 29)
#define	RTSX_TRANS_FAIL_INT	(1U << 28)
#define	RTSX_XD_INT		(1U << 27)
#define	RTSX_MS_INT		(1U << 26)
#define	RTSX_SD_INT		(1U << 25)
#define	RTSX_DELINK_INT		(1U << 24)
#define	RTSX_SD_WRITE_PROTECT	(1U << 19)
#define	RTSX_XD_EXIST		(1U << 18)
#define	RTSX_MS_EXIST		(1U << 17)
#define	RTSX_SD_EXIST		(1U << 16)
#define	RTSX_CARD_EXIST		(RTSX_XD_EXIST|RTSX_MS_EXIST|RTSX_SD_EXIST)
#define	RTSX_CARD_INT		(RTSX_XD_INT|RTSX_MS_INT|RTSX_SD_INT)

/* Chip register access. */
#define	RTSX_HAIMR		0x10
#define	RTSX_HAIMR_WRITE	0x40000000
#define	RTSX_HAIMR_BUSY		0x80000000

/* Interrupt enable register. */
#define	RTSX_BIER		0x18
#define	RTSX_CMD_DONE_INT_EN	(1U << 31)
#define	RTSX_DATA_DONE_INT_EN	(1U << 30)
#define	RTSX_TRANS_OK_INT_EN	(1U << 29)
#define	RTSX_TRANS_FAIL_INT_EN	(1U << 28)
#define	RTSX_XD_INT_EN		(1U << 27)
#define	RTSX_MS_INT_EN		(1U << 26)
#define	RTSX_SD_INT_EN		(1U << 25)
#define	RTSX_GPIO0_INT_EN	(1U << 24)
#define	RTSX_MS_OC_INT_EN	(1U << 23)
#define	RTSX_SD_OC_INT_EN	(1U << 22)

/* Power on/off. */
#define	RTSX_FPDCTL			0xFC00
#define	RTSX_SSC_POWER_DOWN		0x01
#define	RTSX_SD_OC_POWER_DOWN		0x02
#define	RTSX_MS_OC_POWER_DOWN		0x04
#define	RTSX_ALL_POWER_DOWN		0x07
#define	RTSX_OC_POWER_DOWN		0x06

/* Card power control register. */
#define	RTSX_CARD_PWR_CTL		0xFD50
#define	RTSX_SD_PWR_ON			0x00
#define	RTSX_SD_PARTIAL_PWR_ON		0x01
#define	RTSX_SD_PWR_OFF			0x03
#define	RTSX_SD_PWR_MASK		0x03

#define	RTSX_PMOS_STRG_MASK		0x10
#define	RTSX_PMOS_STRG_400mA		0x00
#define	RTSX_PMOS_STRG_800mA		0x10

#define	RTSX_BPP_POWER_MASK		0x0F
#define	RTSX_BPP_POWER_OFF		0x0F
#define	RTSX_BPP_POWER_5_PERCENT_ON	0x0E
#define	RTSX_BPP_POWER_10_PERCENT_ON	0x0C
#define	RTSX_BPP_POWER_15_PERCENT_ON	0x08
#define	RTSX_BPP_POWER_ON		0x00

#define	RTSX_MS_PWR_OFF			0x0C
#define	RTSX_MS_PWR_ON			0x00
#define	RTSX_MS_PARTIAL_PWR_ON		0x04

#define	RTSX_RTL8411B_PACKAGE		0xFD51
#define	RTSX_RTL8411B_QFN48		0x02

#define	RTSX_CARD_SHARE_MODE		0xFD52
#define	RTSX_CARD_SHARE_MASK		0x0F
#define	RTSX_CARD_SHARE_48_XD		0x02
#define	RTSX_CARD_SHARE_48_SD		0x04
#define	RTSX_CARD_SHARE_48_MS		0x08

#define	RTSX_CARD_DRIVE_SEL		0xFD53
#define	RTSX_MS_DRIVE_8mA		(0x01 << 6)
#define	RTSX_MMC_DRIVE_8mA		(0x01 << 4)
#define	RTSX_XD_DRIVE_8mA		(0x01 << 2)
#define	RTSX_GPIO_DRIVE_8mA		0x01
#define	RTSX_CARD_DRIVE_DEFAULT		(RTSX_MS_DRIVE_8mA | RTSX_GPIO_DRIVE_8mA)
#define	RTSX_RTS5209_CARD_DRIVE_DEFAULT (RTSX_MS_DRIVE_8mA | RTSX_MMC_DRIVE_8mA | \
					 RTSX_XD_DRIVE_8mA | RTSX_GPIO_DRIVE_8mA)
#define	RTSX_RTL8411_CARD_DRIVE_DEFAULT (RTSX_MS_DRIVE_8mA | RTSX_MMC_DRIVE_8mA | \
					 RTSX_XD_DRIVE_8mA)

#define	RTSX_CARD_STOP			0xFD54
#define	RTSX_SPI_STOP			0x01
#define	RTSX_XD_STOP			0x02
#define	RTSX_SD_STOP			0x04
#define	RTSX_MS_STOP			0x08
#define	RTSX_SPI_CLR_ERR		0x10
#define	RTSX_XD_CLR_ERR			0x20
#define	RTSX_SD_CLR_ERR			0x40
#define	RTSX_MS_CLR_ERR			0x80
#define	RTSX_ALL_STOP			0x0F
#define	RTSX_ALL_CLR_ERR		0xF0

#define	RTSX_CARD_OE			0xFD55
#define	RTSX_XD_OUTPUT_EN		0x02
#define	RTSX_SD_OUTPUT_EN		0x04
#define	RTSX_MS_OUTPUT_EN		0x08
#define	RTSX_SPI_OUTPUT_EN		0x10
#define	RTSX_CARD_OUTPUT_EN		(RTSX_XD_OUTPUT_EN|RTSX_SD_OUTPUT_EN|\
					 RTSX_MS_OUTPUT_EN)

#define	RTSX_CARD_GPIO_DIR		0xFD57
#define	RTSX_CARD_GPIO			0xFD58
#define	RTSX_CARD_GPIO_LED_OFF		0x01

#define	RTSX_SD30_CLK_DRIVE_SEL		0xFD5A
#define	RTSX_DRIVER_TYPE_A		0x05
#define	RTSX_DRIVER_TYPE_B		0x03
#define	RTSX_DRIVER_TYPE_C		0x02
#define	RTSX_DRIVER_TYPE_D		0x01

#define	RTSX_CARD_DATA_SOURCE		0xFD5B
#define	RTSX_RING_BUFFER		0x00
#define	RTSX_PINGPONG_BUFFER		0x01

#define	RTSX_CARD_SELECT		0xFD5C
#define	RTSX_XD_MOD_SEL			0x01
#define	RTSX_SD_MOD_SEL			0x02
#define	RTSX_MS_MOD_SEL			0x03
#define	RTSX_SPI_MOD_SEL		0x04

#define	RTSX_SD30_CMD_DRIVE_SEL		0xFD5E /* was 0xFE5E in OpenBSD */
#define	RTSX_CFG_DRIVER_TYPE_A		0x02
#define	RTSX_CFG_DRIVER_TYPE_B		0x03
#define	RTSX_CFG_DRIVER_TYPE_C		0x01
#define	RTSX_CFG_DRIVER_TYPE_D		0x00
#define	RTSX_SD30_DRIVE_SEL_MASK	0x07

#define	RTSX_SD30_DAT_DRIVE_SEL		0xFD5F

/* Card clock. */
#define	RTSX_CARD_CLK_EN		0xFD69
#define	RTSX_XD_CLK_EN			0x02
#define	RTSX_SD_CLK_EN			0x04
#define	RTSX_MS_CLK_EN			0x08
#define	RTSX_SPI_CLK_EN			0x10
#define	RTSX_CARD_CLK_EN_ALL	(RTSX_XD_CLK_EN|RTSX_SD_CLK_EN|\
				 RTSX_MS_CLK_EN|RTSX_SPI_CLK_EN)

#define	RTSX_SDIO_CTRL			0xFD6B
#define	RTSX_SDIO_BUS_CTRL		0x01
#define	RTSX_SDIO_CD_CTRL		0x02

#define	RTSX_CARD_PAD_CTL		0xFD73
#define	RTSX_CD_DISABLE_MASK		0x07
#define	RTSX_CD_AUTO_DISABLE		0x40
#define	RTSX_CD_ENABLE			0x00

/* Internal clock. */
#define	RTSX_CLK_CTL			0xFC02
#define	RTSX_CHANGE_CLK			0x01
#define	RTSX_CLK_LOW_FREQ		0x01

/* Internal clock divisor values. */
#define	RTSX_CLK_DIV			0xFC03
#define	RTSX_CLK_DIV_1			0x01
#define	RTSX_CLK_DIV_2			0x02
#define	RTSX_CLK_DIV_4			0x03
#define	RTSX_CLK_DIV_8			0x04

/* Internal clock selection. */
#define	RTSX_CLK_SEL			0xFC04
#define	RTSX_SSC_80			0
#define	RTSX_SSC_100			1
#define	RTSX_SSC_120			2
#define	RTSX_SSC_150			3
#define	RTSX_SSC_200			4

#define	RTSX_SSC_DIV_N_0		0xFC0F

#define	RTSX_SSC_CTL1			0xFC11
#define	RTSX_RSTB			0x80
#define	RTSX_SSC_8X_EN			0x40
#define	RTSX_SSC_FIX_FRAC		0x20
#define	RTSX_SSC_SEL_1M			0x00
#define	RTSX_SSC_SEL_2M			0x08
#define	RTSX_SSC_SEL_2M			0x08
#define	RTSX_SSC_SEL_4M			0x10
#define	RTSX_SSC_SEL_8M			0x18

#define	RTSX_SSC_CTL2			0xFC12
#define	RTSX_SSC_DEPTH_MASK		0x07
#define	RTSX_SSC_DEPTH_4M		0x01
#define	RTSX_SSC_DEPTH_2M		0x02
#define	RTSX_SSC_DEPTH_1M		0x03
#define	RTSX_SSC_DEPTH_500K		0x04
#define	RTSX_SSC_DEPTH_250K		0x05

/* RC oscillator, default is 2M */
#define	RTSX_RCCTL			0xFC14
#define	RTSX_RCCTL_F_400K		0x00
#define	RTSX_RCCTL_F_2M			0x01

/* RTS5229-only. */
#define	RTSX_OLT_LED_CTL		0xFC1E
#define	RTSX_OLT_LED_PERIOD		0x02
#define	RTSX_OLT_LED_AUTOBLINK		0x08

#define	RTSX_LDO_CTL			0xFC1E
#define	RTSX_BPP_ASIC_3V3		0x07
#define	RTSX_BPP_ASIC_MASK		0x07
#define	RTSX_BPP_PAD_3V3		0x04
#define	RTSX_BPP_PAD_1V8		0x00
#define	RTSX_BPP_PAD_MASK		0x04
#define	RTSX_BPP_LDO_POWB		0x03
#define	RTSX_BPP_LDO_ON			0x00
#define	RTSX_BPP_LDO_SUSPEND		0x02
#define	RTSX_BPP_LDO_OFF		0x03
#define	RTSX_BPP_SHIFT_8402		5
#define	RTSX_BPP_SHIFT_8411		4

#define	RTSX_GPIO_CTL			0xFC1F
#define	RTSX_GPIO_LED_ON		0x02

#define	RTSX_SD_VPCLK0_CTL		0xFC2A
#define	RTSX_SD_VPCLK1_CTL		0xFC2B
#define	RTSX_PHASE_SELECT_MASK		0x1F
#define	RTSX_PHASE_NOT_RESET		0x40

/* Host controller commands. */
#define	RTSX_READ_REG_CMD		0
#define	RTSX_WRITE_REG_CMD		1
#define	RTSX_CHECK_REG_CMD		2

#define	RTSX_OCPCTL			0xFC15
#define	RTSX_OCPSTAT			0xFC16
#define	RTSX_OCPGLITCH			0xFC17
#define	RTSX_OCPPARA1			0xFC18
#define	RTSX_OCPPARA2			0xFC19

/* FPGA */
#define	RTSX_FPGA_PULL_CTL		0xFC1D
#define	RTSX_FPGA_MS_PULL_CTL_BIT	0x10
#define	RTSX_FPGA_SD_PULL_CTL_BIT	0x08

/* Clock source configuration register. */
#define	RTSX_CARD_CLK_SOURCE		0xFC2E
#define	RTSX_CRC_FIX_CLK		(0x00 << 0)
#define	RTSX_CRC_VAR_CLK0		(0x01 << 0)
#define	RTSX_CRC_VAR_CLK1		(0x02 << 0)
#define	RTSX_SD30_FIX_CLK		(0x00 << 2)
#define	RTSX_SD30_VAR_CLK0		(0x01 << 2)
#define	RTSX_SD30_VAR_CLK1		(0x02 << 2)
#define	RTSX_SAMPLE_FIX_CLK		(0x00 << 4)
#define	RTSX_SAMPLE_VAR_CLK0		(0x01 << 4)
#define	RTSX_SAMPLE_VAR_CLK1		(0x02 << 4)


/* ASIC */
#define	RTSX_CARD_PULL_CTL1		0xFD60
#define	RTSX_CARD_PULL_CTL2		0xFD61
#define	RTSX_CARD_PULL_CTL3		0xFD62
#define	RTSX_CARD_PULL_CTL4		0xFD63
#define	RTSX_CARD_PULL_CTL5		0xFD64
#define	RTSX_CARD_PULL_CTL6		0xFD65

#define	RTSX_PULL_CTL_DISABLE12		0x55
#define	RTSX_PULL_CTL_DISABLE3		0xD5
#define	RTSX_PULL_CTL_DISABLE3_TYPE_C	0xE5
#define	RTSX_PULL_CTL_ENABLE12		0xAA
#define	RTSX_PULL_CTL_ENABLE3		0xE9
#define	RTSX_PULL_CTL_ENABLE3_TYPE_C	0xD9

/* SD configuration register 1 (clock divider, bus mode and width). */
#define	RTSX_SD_CFG1			0xFDA0
#define	RTSX_CLK_DIVIDE_0		0x00
#define	RTSX_CLK_DIVIDE_128		0x80
#define	RTSX_CLK_DIVIDE_256		0xC0
#define	RTSX_CLK_DIVIDE_MASK		0xC0
#define	RTSX_SD20_MODE			0x00
#define	RTSX_SDDDR_MODE			0x04
#define	RTSX_SD30_MODE			0x08
#define	RTSX_SD_MODE_MASK		0x0C
#define	RTSX_BUS_WIDTH_1		0x00
#define	RTSX_BUS_WIDTH_4		0x01
#define	RTSX_BUS_WIDTH_8		0x02
#define	RTSX_SD_ASYNC_FIFO_NOT_RST	0x10
#define	RTSX_BUS_WIDTH_MASK		0x03

/* SD configuration register 2 (SD command response flags). */
#define	RTSX_SD_CFG2			0xFDA1
#define	RTSX_SD_CALCULATE_CRC7		0x00
#define	RTSX_SD_NO_CALCULATE_CRC7	0x80
#define	RTSX_SD_CHECK_CRC16		0x00
#define	RTSX_SD_NO_CHECK_CRC16		0x40
#define	RTSX_SD_NO_CHECK_WAIT_CRC_TO	0x20
#define	RTSX_SD_WAIT_BUSY_END		0x08
#define	RTSX_SD_NO_WAIT_BUSY_END	0x00
#define	RTSX_SD_CHECK_CRC7		0x00
#define	RTSX_SD_NO_CHECK_CRC7		0x04
#define	RTSX_SD_RSP_LEN_0		0x00
#define	RTSX_SD_RSP_LEN_6		0x01
#define	RTSX_SD_RSP_LEN_17		0x02
/* SD command response types. */
#define	RTSX_SD_RSP_TYPE_R0		0x04
#define	RTSX_SD_RSP_TYPE_R1		0x01
#define	RTSX_SD_RSP_TYPE_R1B		0x09
#define	RTSX_SD_RSP_TYPE_R2		0x02
#define	RTSX_SD_RSP_TYPE_R3		0x05
#define	RTSX_SD_RSP_TYPE_R4		0x05
#define	RTSX_SD_RSP_TYPE_R5		0x01
#define	RTSX_SD_RSP_TYPE_R6		0x01
#define	RTSX_SD_RSP_TYPE_R7		0x01

#define	RTSX_SD_CFG3			0xFDA2
#define RTSX_SD30_CLK_END_EN		0x10
#define	RTSX_SD_RSP_80CLK_TIMEOUT_EN	0x01

#define	RTSX_SD_STAT1			0xFDA3
#define	RTSX_SD_CRC7_ERR		0x80
#define	RTSX_SD_CRC16_ERR		0x40
#define	RTSX_SD_CRC_WRITE_ERR		0x20
#define	RTSX_SD_CRC_WRITE_ERR_MASK	0x1C
#define	RTSX_GET_CRC_TIME_OUT		0x02
#define	RTSX_SD_TUNING_COMPARE_ERR	0x01

#define	RTSX_SD_STAT2			0xFDA4
#define	RTSX_SD_RSP_80CLK_TIMEOUT	0x01

#define	RTSX_SD_CRC_ERR	(RTSX_SD_CRC7_ERR|RTSX_SD_CRC16_ERR|RTSX_SD_CRC_WRITE_ERR)

/* SD bus status register. */
#define	RTSX_SD_BUS_STAT		0xFDA5
#define	RTSX_SD_CLK_TOGGLE_EN		0x80
#define	RTSX_SD_CLK_FORCE_STOP		0x40
#define	RTSX_SD_DAT3_STATUS		0x10
#define	RTSX_SD_DAT2_STATUS		0x08
#define	RTSX_SD_DAT1_STATUS		0x04
#define	RTSX_SD_DAT0_STATUS		0x02
#define	RTSX_SD_CMD_STATUS		0x01

#define	RTSX_SD_PAD_CTL			0xFDA6
#define	RTSX_SD_IO_USING_1V8		0x80

/* Sample point control register. */
#define	RTSX_SD_SAMPLE_POINT_CTL	0xFDA7
#define	RTSX_DDR_FIX_RX_DAT		0x00
#define	RTSX_DDR_VAR_RX_DAT		0x80
#define	RTSX_DDR_FIX_RX_DAT_EDGE	0x00
#define	RTSX_DDR_FIX_RX_DAT_14_DELAY	0x40
#define	RTSX_DDR_FIX_RX_CMD		0x00
#define	RTSX_DDR_VAR_RX_CMD		0x20
#define	RTSX_DDR_FIX_RX_CMD_POS_EDGE	0x00
#define	RTSX_DDR_FIX_RX_CMD_14_DELAY	0x10
#define	RTSX_SD20_RX_POS_EDGE		0x00
#define	RTSX_SD20_RX_14_DELAY		0x08
#define	RTSX_SD20_RX_SEL_MASK		0x08

#define	RTSX_SD_PUSH_POINT_CTL		0xFDA8
#define	RTSX_SD20_TX_NEG_EDGE		0x00
#define	RTSX_SD20_TX_SEL_MASK		0x10
#define	RTSX_SD20_TX_14_AHEAD		0x10

#define	RTSX_SD_CMD0			0xFDA9
#define	  RTSX_SD_CMD_START		0x40
#define	RTSX_SD_CMD1			0xFDAA
#define	RTSX_SD_CMD2			0xFDAB
#define	RTSX_SD_CMD3			0xFDAC
#define	RTSX_SD_CMD4			0xFDAD

#define	RTSX_SD_CMD5			0xFDAE
#define	RTSX_SD_BYTE_CNT_L		0xFDAF
#define	RTSX_SD_BYTE_CNT_H		0xFDB0
#define	RTSX_SD_BLOCK_CNT_L		0xFDB1
#define	RTSX_SD_BLOCK_CNT_H		0xFDB2

/*
 * Transfer modes.
 */
#define	RTSX_SD_TRANSFER		0xFDB3

/* Write one or two bytes from SD_CMD2 and SD_CMD3 to the card. */
#define	RTSX_TM_NORMAL_WRITE		0x00

/* Write (SD_BYTE_CNT * SD_BLOCK_COUNTS) bytes from ring buffer to card. */
#define	RTSX_TM_AUTO_WRITE3		0x01

/* Like AUTO_WRITE3, plus automatically send CMD 12 when done.
 * The response to CMD 12 is written to SD_CMD{0,1,2,3,4}. */
#define	RTSX_TM_AUTO_WRITE4		0x02

/* Read (SD_BYTE_CNT * SD_BLOCK_CNT) bytes from card into ring buffer. */
#define	RTSX_TM_AUTO_READ3		0x05

/* Like AUTO_READ3, plus automatically send CMD 12 when done.
 * The response to CMD 12 is written to SD_CMD{0,1,2,3,4}. */
#define	RTSX_TM_AUTO_READ4		0x06

/* Send an SD command described in SD_CMD{0,1,2,3,4} to the card and put
 * the response into SD_CMD{0,1,2,3,4}. Long responses (17 byte) are put
 * into ping-pong buffer 2 instead. */
#define	RTSX_TM_CMD_RSP			0x08

/* Send write command, get response from the card, write data from ring
 * buffer to card, and send CMD 12 when done.
 * The response to CMD 12 is written to SD_CMD{0,1,2,3,4}. */
#define	RTSX_TM_AUTO_WRITE1		0x09

/* Like AUTO_WRITE1 except no CMD 12 is sent. */
#define	RTSX_TM_AUTO_WRITE2		0x0A

/* Send read command, read up to 512 bytes (SD_BYTE_CNT * SD_BLOCK_CNT)
 * from the card into the ring buffer or ping-pong buffer 2. */
#define	RTSX_TM_NORMAL_READ		0x0C

/* Same as WRITE1, except data is read from the card to the ring buffer. */
#define	RTSX_TM_AUTO_READ1		0x0D

/* Same as WRITE2, except data is read from the card to the ring buffer. */
#define	RTSX_TM_AUTO_READ2		0x0E

/* Send CMD 19 and receive response and tuning pattern from card and
 * report the result. */
#define	RTSX_TM_AUTO_TUNING		0x0F

/* transfer control */
#define	RTSX_SD_TRANSFER_START		0x80
#define	RTSX_SD_TRANSFER_END		0x40
#define	RTSX_SD_STAT_IDLE		0x20
#define	RTSX_SD_TRANSFER_ERR		0x10

#define	RTSX_SD_CMD_STATE		0xFDB5
#define	RTSX_SD_CMD_IDLE		0x80

#define	RTSX_SD_DATA_STATE		0xFDB6
#define	RTSX_SD_DATA_IDLE		0x80

#define RTSX_REG_SD_STOP_SDCLK_CFG	0xFDB8
#define RTSX_SD30_CLK_STOP_CFG_EN	0x04
#define RTSX_SD30_CLK_STOP_CFG0		0x01
#define RTSX_SD30_CLK_STOP_CFG1		0x02

#define RTSX_REG_PRE_RW_MODE		0xFD70
#define RTSX_EN_INFINITE_MODE		0x01

/* ping-pong buffer 2 */
#define	RTSX_PPBUF_BASE2		0xFA00
#define	RTSX_PPBUF_SIZE			256

#define	RTSX_SUPPORTED_VOLTAGE		(MMC_OCR_300_310|MMC_OCR_310_320|\
					 MMC_OCR_320_330|MMC_OCR_330_340)

#define	RTSX_CFG_PCI			0x1C
#define	RTSX_CFG_ASIC			0x10

#define	RTSX_IRQEN0			0xFE20
#define	RTSX_LINK_DOWN_INT_EN		0x10
#define	RTSX_LINK_READY_INT_EN		0x20
#define	RTSX_SUSPEND_INT_EN		0x40
#define	RTSX_DMA_DONE_INT_EN		0x80

#define	RTSX_IRQSTAT0			0xFE21
#define	RTSX_LINK_DOWN_INT		0x10
#define	RTSX_LINK_READY_INT		0x20
#define	RTSX_SUSPEND_INT		0x40
#define	RTSX_DMA_DONE_INT		0x80

#define	RTSX_DMATC0			0xFE28
#define	RTSX_DMATC1			0xFE29
#define	RTSX_DMATC2			0xFE2A
#define	RTSX_DMATC3			0xFE2B

#define	RTSX_DMACTL			0xFE2C
#define	RTSX_DMA_EN			0x01
#define	RTSX_DMA_DIR			0x02
#define	RTSX_DMA_DIR_TO_CARD		0x00
#define	RTSX_DMA_DIR_FROM_CARD		0x02
#define	RTSX_DMA_BUSY			0x04
#define	RTSX_DMA_RST			0x80
#define	RTSX_DMA_128			(0 << 4)
#define	RTSX_DMA_256			(1 << 4)
#define	RTSX_DMA_512			(2 << 4)
#define	RTSX_DMA_1024			(3 << 4)
#define	RTSX_DMA_PACK_SIZE_MASK		0x30

#define	RTSX_RBCTL			0xFE34
#define	RTSX_RB_FLUSH			0x80
#define RTSX_U_AUTO_DMA_EN_MASK		0x20
#define RTSX_U_AUTO_DMA_DISABLE		0x00

#define	RTSX_CFGADDR0			0xFE35
#define	RTSX_CFGADDR1			0xFE36
#define	RTSX_CFGDATA0			0xFE37
#define	RTSX_CFGDATA1			0xFE38
#define	RTSX_CFGDATA2			0xFE39
#define	RTSX_CFGDATA3			0xFE3A
#define	RTSX_CFGRWCTL			0xFE3B
#define	RTSX_CFG_WRITE_DATA0		0x01
#define	RTSX_CFG_WRITE_DATA1		0x02
#define	RTSX_CFG_WRITE_DATA2		0x04
#define	RTSX_CFG_WRITE_DATA3		0x08
#define	RTSX_CFG_BUSY			0x80

#define	RTSX_LTR_CTL			0xFE4A

#define	RTSX_OBFF_CFG			0xFE4C
#define	RTSX_OBFF_EN_MASK		0x03
#define	RTSX_OBFF_DISABLE		0x00
#define	RTSX_OBFF_ENABLE		0x03

#define	RTSX_SDIOCFG_REG		0x724
#define	RTSX_SDIOCFG_NO_BYPASS_SDIO	0x02
#define	RTSX_SDIOCFG_HAVE_SDIO		0x04
#define	RTSX_SDIOCFG_SINGLE_LUN		0x08
#define	RTSX_SDIOCFG_SDIO_ONLY		0x80

#define	RTSX_HOST_SLEEP_STATE		0xFE60
#define	RTSX_HOST_ENTER_S1		0x01
#define	RTSX_HOST_ENTER_S3		0x02

#define	RTSX_SDIO_CFG			0xFE70
#define	RTSX_SDIO_BUS_AUTO_SWITCH	0x10

#define	RTSX_NFTS_TX_CTRL		0xFE72
#define	RTSX_INT_READ_CLR		0x02

#define	RTSX_PWR_GATE_CTRL		0xFE75
#define	RTSX_PWR_GATE_EN		0x01
#define	RTSX_LDO3318_PWR_MASK		0x06
#define	RTSX_LDO3318_ON			0x00
#define	RTSX_LDO3318_SUSPEND		0x04
#define	RTSX_LDO3318_OFF		0x06
#define	RTSX_LDO3318_VCC1		0x02
#define	RTSX_LDO3318_VCC2		0x04
#define	RTSX_PWD_SUSPEND_EN		0xFE76
#define	RTSX_LDO_PWR_SEL		0xFE78
#define	RTSX_LDO_PWR_SEL_3V3		0x01
#define	RTSX_LDO_PWR_SEL_DV33		0x03

#define	RTSX_PHY_RWCTL			0xFE3C
#define	RTSX_PHY_READ			0x00
#define	RTSX_PHY_WRITE			0x01
#define	RTSX_PHY_BUSY			0x80
#define	RTSX_PHY_DATA0			0xFE3D
#define	RTSX_PHY_DATA1			0xFE3E
#define	RTSX_PHY_ADDR			0xFE3F

#define	RTSX_PHY_PCR			0x00
#define	RTSX_PHY_PCR_FORCE_CODE		0xB000
#define	RTSX_PHY_PCR_OOBS_CALI_50	0x0800
#define	RTSX_PHY_PCR_OOBS_VCM_08	0x0200
#define	RTSX_PHY_PCR_OOBS_SEN_90	0x0040
#define	RTSX_PHY_PCR_RSSI_EN		0x0002
#define	RTSX_PHY_PCR_RX10K		0x0001

#define	RTSX_PHY_RCR1			0x02
#define	RTSX_PHY_RCR1_ADP_TIME_4	0x0400
#define	RTSX_PHY_RCR1_VCO_COARSE	0x001F
#define	RTSX_PHY_RCR1_INIT_27S		0x0A1F

#define	RTSX_PHY_RCR2			0x03
#define	RTSX_PHY_RCR2_EMPHASE_EN	0x8000
#define	RTSX_PHY_RCR2_NADJR		0x4000
#define	RTSX_PHY_RCR2_CDR_SR_2		0x0100
#define	RTSX_PHY_RCR2_FREQSEL_12	0x0040
#define	RTSX_PHY_RCR2_CDR_SC_12P	0x0010
#define	RTSX_PHY_RCR2_CALIB_LATE	0x0002
#define	RTSX_PHY_RCR2_INIT_27S		0xC152

#define	RTSX__PHY_ANA03			0x03
#define	RTSX__PHY_ANA03_TIMER_MAX	0x2700
#define	RTSX__PHY_ANA03_OOBS_DEB_EN	0x0040
#define	RTSX__PHY_CMU_DEBUG_EN		0x0008

#define	RTSX_PHY_RDR			0x05
#define	RTSX_PHY_RDR_RXDSEL_1_9		0x4000
#define	RTSX_PHY_SSC_AUTO_PWD		0x0600

#define	RTSX_PHY_TUNE			0x08
#define	RTSX_PHY_TUNE_TUNEREF_1_0	0x4000
#define	RTSX_PHY_TUNE_VBGSEL_1252	0x0C00
#define	RTSX_PHY_TUNE_SDBUS_33		0x0200
#define	RTSX_PHY_TUNE_TUNED18		0x01C0
#define	RTSX_PHY_TUNE_TUNED12		0X0020
#define	RTSX_PHY_TUNE_TUNEA12		0x0004
#define	RTSX_PHY_TUNE_VOLTAGE_MASK	0xFC3F
#define	RTSX_PHY_TUNE_VOLTAGE_3V3	0x03C0
#define	RTSX_PHY_TUNE_D18_1V8		0x0100
#define	RTSX_PHY_TUNE_D18_1V7		0x0080

#define	RTSX_PHY_BPCR			0x0A
#define	RTSX_PHY_BPCR_IBRXSEL		0x0400
#define	RTSX_PHY_BPCR_IBTXSEL		0x0100
#define	RTSX_PHY_BPCR_IB_FILTER		0x0080
#define	RTSX_PHY_BPCR_CMIRROR_EN	0x0040

#define	RTSX_PHY_REV			0x19
#define	RTSX_PHY_REV_RESV		0xE000
#define	RTSX_PHY_REV_RXIDLE_LATCHED	0x1000
#define	RTSX_PHY_REV_P1_EN		0x0800
#define	RTSX_PHY_REV_RXIDLE_EN		0x0400
#define	RTSX_PHY_REV_CLKREQ_TX_EN	0x0200
#define	RTSX_PHY_REV_CLKREQ_RX_EN	0x0100
#define	RTSX_PHY_REV_CLKREQ_DT_1_0	0x0040
#define	RTSX_PHY_REV_STOP_CLKRD		0x0020
#define	RTSX_PHY_REV_RX_PWST		0x0008
#define	RTSX_PHY_REV_STOP_CLKWR		0x0004


#define	RTSX__PHY_REV0				0x19
#define	RTSX__PHY_REV0_FILTER_OUT		0x3800
#define	RTSX__PHY_REV0_CDR_BYPASS_PFD		0x0100
#define	RTSX__PHY_REV0_CDR_RX_IDLE_BYPASS	0x0002

#define	RTSX_PHY_FLD0			0x1A
#define	RTSX_PHY_FLD0_INIT_27S		0x2546

#define	RTSX_PHY_FLD3			0x1D
#define	RTSX_PHY_FLD3_TIMER_4		0x0800
#define	RTSX_PHY_FLD3_TIMER_6		0x0020
#define	RTSX_PHY_FLD3_RXDELINK		0x0004
#define	RTSX_PHY_FLD3_INIT_27S		0x0004

#define	RTSX__PHY_FLD0			0x1D
#define	RTSX__PHY_FLD0_CLK_REQ_20C	0x8000
#define	RTSX__PHY_FLD0_RX_IDLE_EN	0x1000
#define	RTSX__PHY_FLD0_BIT_ERR_RSTN	0x0800
#define	RTSX__PHY_FLD0_BER_COUNT	0x01E0
#define	RTSX__PHY_FLD0_BER_TIMER	0x001E
#define	RTSX__PHY_FLD0_CHECK_EN		0x0001

#define	RTSX_PHY_FLD4			0x1E
#define	RTSX_PHY_FLD4_FLDEN_SEL		0x4000
#define	RTSX_PHY_FLD4_REQ_REF		0x2000
#define	RTSX_PHY_FLD4_RXAMP_OFF		0x1000
#define	RTSX_PHY_FLD4_REQ_ADDA		0x0800
#define	RTSX_PHY_FLD4_BER_COUNT		0x00E0
#define	RTSX_PHY_FLD4_BER_TIMER		0x000A
#define	RTSX_PHY_FLD4_BER_CHK_EN	0x0001
#define	RTSX_PHY_FLD4_INIT_27S		0x5C7F

#define	RTSX_CARD_AUTO_BLINK		0xFD56
#define	RTSX_LED_BLINK_EN		0x08
#define	RTSX_LED_BLINK_SPEED		0x05

#define	RTSX_PCLK_CTL			0xFE55
#define	RTSX_PCLK_MODE_SEL		0x20

#define	RTSX_PME_FORCE_CTL		0xFE56

#define	RTSX_ASPM_FORCE_CTL		0xFE57
#define	RTSX_ASPM_FORCE_MASK		0x3F
#define	RTSX_FORCE_ASPM_NO_ASPM		0x00

#define	RTSX_PM_CLK_FORCE_CTL		0xFE58
#define RTSX_CLK_PM_EN			0x01

#define	RTSX_FUNC_FORCE_CTL		0xFE59
#define	RTSX_FUNC_FORCE_UPME_XMT_DBG	0x02

#define	RTSX_CHANGE_LINK_STATE		0xFE5B
#define	RTSX_CD_RST_CORE_EN		0x01
#define	RTSX_FORCE_RST_CORE_EN		0x02
#define	RTSX_NON_STICKY_RST_N_DBG	0x08
#define	RTSX_MAC_PHY_RST_N_DBG		0x10

#define	RTSX_PERST_GLITCH_WIDTH		0xFE5C

#define	RTSX_EFUSE_CONTENT		0xFE5F

#define	RTSX_PM_EVENT_DEBUG		0xFE71
#define	RTSX_PME_DEBUG_0		0x08

#define RTSX_L1SUB_CONFIG1		0xFE8D
#define RTSX_AUX_CLK_ACTIVE_SEL_MASK	0x01
#define RTSX_MAC_CKSW_DONE		0x00

#define	RTSX_L1SUB_CONFIG2		0xFE8E
#define	RTSX_L1SUB_AUTO_CFG		0x02

#define	RTSX_L1SUB_CONFIG3		0xFE8F

#define	RTSX_DUMMY_REG			0xFE90

#define RTSX_REG_VREF			0xFE97
#define RTSX_PWD_SUSPND_EN		0x10

#define RTSX_RTS5260_DMA_RST_CTL_0	0xFEBF
#define RTSX_RTS5260_DMA_RST		0x80
#define RTSX_RTS5260_ADMA3_RST		0x40

#define	RTSX_PETXCFG			0xFF03 /* was 0xFE49 in OpenBSD */
#define	RTSX_FORCE_CLKREQ_DELINK_MASK	0x80
#define	RTSX_FORCE_CLKREQ_LOW		0x80

#define	RTSX_RREF_CFG			0xFF6C
#define	RTSX_RREF_VBGSEL_MASK		0x38
#define	RTSX_RREF_VBGSEL_1V25		0x28

#define	RTSX_PM_CTRL3			0xFF46
#define	RTSX_RTS522A_PM_CTRL3		0xFF7E
#define	RTSX_D3_DELINK_MODE_EN		0x10
#define	RTSX_PM_WAKE_EN			0x01

#define	RTSX_OOBS_CONFIG		0xFF6E
#define	RTSX_OOBS_AUTOK_DIS		0x80
#define	RTSX_OOBS_VAL_MASK		0x1F

#define RTSX_LDO_DV18_CFG		0xFF70
#define RTSX_DV331812_MASK		0x70
#define RTSX_DV331812_33		0x70

#define	RTSX_LDO_CONFIG2		0xFF71
#define	RTSX_LDO_D3318_MASK		0x07
#define	RTSX_LDO_D3318_33V		0x07
#define	RTSX_LDO_D3318_18V		0x02
#define	RTSX_DV331812_VDD1		0x04
#define	RTSX_DV331812_POWERON		0x08
#define	RTSX_DV331812_POWEROFF		0x00

#define	RTSX_LDO_VCC_CFG0		0xFF72
#define	RTSX_LDO_VCC_LMTVTH_MASK	0x30
#define	RTSX_LDO_VCC_LMTVTH_2A		0x10
#define RTSX_RTS5260_DVCC_TUNE_MASK	0x70
#define RTSX_RTS5260_DVCC_33		0x70

#define	RTSX_LDO_VCC_CFG1		0xFF73
#define	RTSX_LDO_VCC_REF_TUNE_MASK	0x30
#define	RTSX_LDO_VCC_REF_1V2		0x20
#define	RTSX_LDO_VCC_TUNE_MASK		0x07
#define	RTSX_LDO_VCC_1V8		0x04
#define	RTSX_LDO_VCC_3V3		0x07
#define	RTSX_LDO_VCC_LMT_EN		0x08
/*RTS5260*/
#define	RTSX_LDO_POW_SDVDD1_MASK	0x08
#define	RTSX_LDO_POW_SDVDD1_ON		0x08
#define	RTSX_LDO_POW_SDVDD1_OFF		0x00

#define RTSX_RTS5260_DVCC_CTRL		0xFF73
#define RTSX_RTS5260_DVCC_OCP_EN	(0x01 << 7)
#define RTSX_RTS5260_DVCC_OCP_THD_MASK	(0x07 << 4)
#define RTSX_RTS5260_DVCC_POWERON	(0x01 << 3)
#define RTSX_RTS5260_DVCC_OCP_CL_EN	(0x01 << 2)

#define	RTSX_LDO_VIO_CFG		0xFF75
#define	RTSX_LDO_VIO_TUNE_MASK		0x07
#define	RTSX_LDO_VIO_1V7		0x03

#define	RTSX_LDO_DV12S_CFG		0xFF76
#define	RTSX_LDO_D12_TUNE_MASK		0x07
#define	RTSX_LDO_D12_TUNE_DF		0x04

#define	RTSX_LDO_AV12S_CFG		0xFF77
#define	RTSX_LDO_AV12S_TUNE_MASK	0x07
#define	RTSX_LDO_AV12S_TUNE_DF		0x04

#define	RTSX_SG_INT			0x04
#define	RTSX_SG_END			0x02
#define	RTSX_SG_VALID			0x01

#define	RTSX_SG_NO_OP			0x00
#define	RTSX_SG_TRANS_DATA		(0x02 << 4)
#define	RTSX_SG_LINK_DESC		(0x03 << 4)

#define	RTSX_IC_VERSION_A		0x00
#define	RTSX_IC_VERSION_B		0x01
#define	RTSX_IC_VERSION_C		0x02
#define	RTSX_IC_VERSION_D		0x03

#define	RTSX_RTS5260_AUTOLOAD_CFG4	0xFF7F
#define RTSX_RTS5260_MIMO_DISABLE	0x8A

#define	RTSX_PCR_SETTING_REG1		0x724
#define	RTSX_PCR_SETTING_REG2		0x814
#define	RTSX_PCR_SETTING_REG3		0x747

#define	RTSX_RX_PHASE_MAX		32
#define	RTSX_RX_TUNING_CNT		3
#endif