freebsd-src/sys/dev/qcom_qup/qcom_qup_reg.h
Warner Losh 95ee2897e9 sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
2023-08-16 11:54:11 -06:00

114 lines
3.9 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2021 Adrian Chadd <adrian@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef __QCOM_QUP_REG_H__
#define __QCOM_QUP_REG_H__
#define QUP_CONFIG 0x0000
#define QUP_CONFIG_N 0x001f
#define QUP_CONFIG_SPI_MODE (1U << 8)
#define QUP_CONFIG_MINI_CORE_I2C_MASTER (2U << 8)
#define QUP_CONFIG_MINI_CORE_I2C_SLAVE (3U << 8)
#define QUP_CONFIG_NO_OUTPUT (1U << 6)
#define QUP_CONFIG_NO_INPUT (1U << 7)
#define QUP_CONFIG_APP_CLK_ON_EN (1 << 12)
#define QUP_CONFIG_CLOCK_AUTO_GATE (1U << 13)
#define QUP_STATE 0x0004
#define QUP_STATE_VALID (1U << 2)
#define QUP_STATE_RESET 0
#define QUP_STATE_RUN 1
#define QUP_STATE_PAUSE 3
#define QUP_STATE_MASK 3
#define QUP_STATE_CLEAR 2
#define QUP_IO_M_MODES 0x0008
#define QUP_IO_M_OUTPUT_BLOCK_SIZE_MASK 0x3
#define QUP_IO_M_OUTPUT_BLOCK_SIZE_SHIFT 0
#define QUP_IO_M_OUTPUT_FIFO_SIZE_MASK 0x7
#define QUP_IO_M_OUTPUT_FIFO_SIZE_SHIFT 2
#define QUP_IO_M_INPUT_BLOCK_SIZE_MASK 0x3
#define QUP_IO_M_INPUT_BLOCK_SIZE_SHIFT 5
#define QUP_IO_M_INPUT_FIFO_SIZE_MASK 0x7
#define QUP_IO_M_INPUT_FIFO_SIZE_SHIFT 7
#define QUP_IO_M_PACK_EN (1U << 15)
#define QUP_IO_M_UNPACK_EN (1U << 14)
#define QUP_IO_M_INPUT_MODE_SHIFT 12
#define QUP_IO_M_OUTPUT_MODE_SHIFT 10
#define QUP_IO_M_INPUT_MODE_MASK 0x3
#define QUP_IO_M_OUTPUT_MODE_MASK 0x3
#define QUP_IO_M_MODE_FIFO 0
#define QUP_IO_M_MODE_BLOCK 1
#define QUP_IO_M_MODE_DMOV 2
#define QUP_IO_M_MODE_BAM 3
#define QUP_SW_RESET 0x000c
#define QUP_OPERATIONAL 0x0018
#define QUP_OP_IN_BLOCK_READ_REQ (1U << 13)
#define QUP_OP_OUT_BLOCK_WRITE_REQ (1U << 12)
#define QUP_OP_MAX_INPUT_DONE_FLAG (1U << 11)
#define QUP_OP_MAX_OUTPUT_DONE_FLAG (1U << 10)
#define QUP_OP_IN_SERVICE_FLAG (1U << 9)
#define QUP_OP_OUT_SERVICE_FLAG (1U << 8)
#define QUP_OP_IN_FIFO_FULL (1U << 7)
#define QUP_OP_OUT_FIFO_FULL (1U << 6)
#define QUP_OP_IN_FIFO_NOT_EMPTY (1U << 5)
#define QUP_OP_OUT_FIFO_NOT_EMPTY (1U << 4)
#define QUP_ERROR_FLAGS 0x001c
#define QUP_ERROR_FLAGS_EN 0x0020
#define QUP_ERROR_OUTPUT_OVER_RUN (1U << 5)
#define QUP_ERROR_INPUT_UNDER_RUN (1U << 4)
#define QUP_ERROR_OUTPUT_UNDER_RUN (1U << 3)
#define QUP_ERROR_INPUT_OVER_RUN (1U << 2)
#define QUP_OPERATIONAL_MASK 0x0028
#define QUP_HW_VERSION 0x0030
#define QUP_HW_VERSION_2_1_1 0x20010001
#define QUP_MX_OUTPUT_CNT 0x0100
#define QUP_MX_OUTPUT_CNT_CURRENT 0x0104
#define QUP_OUTPUT_FIFO 0x0110
#define QUP_MX_WRITE_CNT 0x0150
#define QUP_MX_WRITE_CNT_CURRENT 0x0154
#define QUP_MX_INPUT_CNT 0x0200
#define QUP_MX_INPUT_CNT_CURRENT 0x0204
#define QUP_MX_READ_CNT 0x0208
#define QUP_MX_READ_CNT_CURRENT 0x020c
#define QUP_INPUT_FIFO 0x0218
#endif /* __QCOM_QUP_REG_H__ */