freebsd-src/etc/printcap
1998-02-04 12:09:06 +00:00

45 lines
1.7 KiB
Plaintext

# @(#)printcap 5.3 (Berkeley) 6/30/90
# $Id: printcap,v 1.8 1998/01/04 17:59:24 steve Exp $
#
# This enables a simple local "raw" printer, hooked up to the first
# parallel port. No kind of filtering is done, so everything you
# pass to the "lpr" command will be printed unmodified.
#
# Remember, for further print queues you're going to add, you have to
# chose different spool directories (the "sd" capability below),
# otherwise you will greatly confuse lpd.
#
# For some advanced printing, have a look at the "apsfilter" package.
# It plugs into the lpd system, allowing you to print a variety of
# different file types by converting everything to PostScript(tm)
# format. If you don't have a PostScript(tm) printer, don't panic,
# but do also install the "ghostscript" package.
#
# Do also refer to section 7 (Printing) of the handbook. A local copy
# can be found under /usr/share/doc/handbook/handbook.{html,latin1}.
#
# Banner pages are now suppressed by default. Remove the :sh:
# capability to turn them back on.
#
lp|local line printer:\
:sh:\
:lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
#
# Sample remote printer. The physical printer is on machine "lphost".
# NB: you cannot perform any kind of local filtering directly. If
# you need local filters (e.g. LF -> CR-LF conversion for HP printers),
# create a filter script that recursively calls lpd with another -P
# argument after filtering.
#
#remote|sample remote printer:\
# :sh:\
# :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:
#
# Simple Russian printer with hardware CP866 character set, output filter
# used for KOI8-R -> CP866 conversion
#
#lp|Russian local line printer:\
# :sh:of=/usr/libexec/lpr/ru/koi2alt:\
# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: