Warner Losh 0b40a04719 Although not strictly required to boot a 64MB board, bump ... vm_max_virtual_address to be KERNVIRTADDR + 256MB. This allows some future shock protection since the KVA requirements have gone up since the unmapped changes have gone in, as well as preventing us from overlapping with the hardware devices, which we map at 0xd0000000, which we'd hit with anything more than 85MB... MFC after: 3 days		2013-12-06 18:41:16 +00:00
..
at91.c	Move remaining code and data related to static device mapping into the	2013-11-04 22:45:26 +00:00
at91_aicreg.h	Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.	2010-07-14 00:48:53 +00:00
at91_cfata.c	Eliminate devclass_find_free_unit call here, since -1 gives the same	2009-06-10 17:39:19 +00:00
at91_machdep.c	Although not strictly required to boot a 64MB board, bump	2013-12-06 18:41:16 +00:00
at91_mci.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_mcireg.h	- Add support for MCI1 revision 2xx controllers and a work-around for their	2012-04-22 00:43:32 +00:00
at91_pdcreg.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_pio.c	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pio_sam9g20.h	Add support for the AT91SAM9260	2010-10-06 22:40:27 +00:00
at91_pio_sam9g45.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91_pioreg.h	Add definitions for the additional PIO pins found on recent AT91 SoCs.	2013-12-02 02:33:03 +00:00
at91_piovar.h	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pit.c	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pitreg.h	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pmc.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_pmcreg.h	Add charge pump current register.	2012-08-10 04:47:20 +00:00
at91_pmcvar.h	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91_reset.S	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91_rst.c	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rstreg.h	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rtc.c	Loop reading the RTC registers until the same values are obtained	2012-10-07 20:36:46 +00:00
at91_rtcreg.h	Use the RTC unit to get the time. This works on all known AT91SAM9*	2012-10-07 01:58:32 +00:00
at91_spi.c	Fetch the chip select in the bridge driver, like all the other spi	2012-08-23 22:38:37 +00:00
at91_spireg.h	- Prepend the device description with "AT91" to reflect its nature. [1]	2012-06-03 00:54:10 +00:00
at91_ssc.c	Strip trailing whitespace before other changes.	2012-06-13 04:52:19 +00:00
at91_sscreg.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_st.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_streg.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_twi.c	Fix a stray debug that I committed accidentally years ago...	2012-06-22 06:44:22 +00:00
at91_twiio.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_twireg.h	Add support for the Atmel SAM9XE familiy of microcontrollers, which	2012-04-14 17:09:38 +00:00
at91_usartreg.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_wdt.c	Add support for the Atmel SAM9XE familiy of microcontrollers, which	2012-04-14 17:09:38 +00:00
at91_wdtreg.h	Strip trailing whitespace before other changes.	2012-06-13 04:52:19 +00:00
at91board.h	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
at91reg.h	The system IRQ is always IRQ 1. Make it so.	2012-07-10 02:39:03 +00:00
at91rm92reg.h	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91rm9200.c	Fix a typo in the CF device driver name that prevented instantiation.	2013-03-31 12:51:56 +00:00
at91rm9200_devices.c	Fix a typo: the RXD0 pin is PA18, not PA19.	2013-03-29 18:06:54 +00:00
at91rm9200var.h	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
at91sam9g20.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9g20reg.h	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91sam9g45.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9g45reg.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91sam9x5.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9x5reg.h	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
at91sam9260.c	Update comments about setting PLLA and refernce the tables in the	2012-08-11 05:12:46 +00:00
at91sam9260reg.h	Missed one of the special AT91SAM9xxx_BASE defines. This should be	2012-07-10 02:44:15 +00:00
at91soc.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91soc.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91var.h	Remember where we found the DBGU and use that for our console.	2012-07-12 19:11:37 +00:00
board_bwct.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_eb9200.c	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
board_ethernut5.c	uboot should be telling us it is an ETHERNUT5 for this board. Tag it	2012-07-14 06:00:37 +00:00
board_hl200.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_hl201.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_kb920x.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_qila9g20.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9g20ek.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9x25ek.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9260ek.c	Turns out the ETHERNUT5 isn't anything like the SAM9260-EK. Make this	2012-07-27 05:33:55 +00:00
board_sn9g45.c	Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.	2012-07-27 16:38:02 +00:00
board_tsc4370.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
files.at91	Add a nand flash controller driver for Atmel at91 family. Tested only	2013-12-02 03:52:40 +00:00
if_ate.c	Sweep up a bit of arm-land fallout after r257244; include necessary	2013-10-28 15:20:17 +00:00
if_atereg.h	if_ate.c:	2010-10-06 22:25:21 +00:00
if_macb.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_macbreg.h	Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.	2010-07-14 00:48:53 +00:00
if_macbvar.h	Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this	2013-11-30 22:17:27 +00:00
std.at91	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9g45	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.atmel	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.bwct	Convert BWCT and HL200 over to new board mechanism as well. The	2008-11-25 19:05:46 +00:00
std.eb9200	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
std.ethernut5	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.hl200	Compute the master clock frequency, so we no longer need to have it	2012-05-29 03:23:18 +00:00
std.hl201	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.kb920x	Compute the master clock frequency, so we no longer need to have it	2012-05-29 03:23:18 +00:00
std.qila9g20	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.sam9g20ek	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.sam9x25ek	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
std.sam9260ek	Add preliminary support for Atmel SAM9260-EK evaluation kit.	2012-07-14 06:13:23 +00:00
std.sn9g45	Add support for the DesignA Electronics Snapper9g45 System on Module.	2012-07-26 08:05:28 +00:00
std.tsc4370	Convert BWCT and HL200 over to new board mechanism as well. The	2008-11-25 19:05:46 +00:00
uart_bus_at91usart.c	Some models have 6 USARTS + DBGU. Set a consistent name.	2012-07-26 05:46:56 +00:00
uart_cpu_at91usart.c	This file is no longer AT91RM9200 specific, but now is generic to all	2012-07-12 19:15:38 +00:00
uart_dev_at91usart.c	Enable hardware flow control and high speed bulk data transfer in at91 uarts.	2013-04-01 00:00:10 +00:00