freebsd-src/tests/sys/netpfil/pf/utils.subr

# Utility functions
##
# SPDX-License-Identifier: BSD-2-Clause
#
# Copyright (c) 2017 Kristof Provost <kp@FreeBSD.org>
# Copyright (c) 2023 Kajetan Staszkiewicz <vegeta@tuxpowered.net>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.

. $(atf_get_srcdir)/../../common/vnet.subr
common_dir=$(atf_get_srcdir)/../common

pft_onerror()
{
	status=$?

	echo "Debug log."
	echo "=========="
	echo "Test exit status: $?"
	echo

	if [ -f created_jails.lst ]; then
		for jailname in `cat created_jails.lst`
		do
			echo "Jail ${jailname}"
			echo "----------------"
			jexec ${jailname} ifconfig
			jexec ${jailname} netstat -rn
			jexec ${jailname} pfctl -sa -v
		done
	fi

	echo "Created interfaces:"
	echo "-------------------"
	cat created_interfaces.lst

	echo "Host interfaces:"
	echo "----------------"
	ifconfig
}

pft_init()
{
	if [ "$1" == "debug" ]
	then
		trap pft_onerror EXIT
	fi

	vnet_init

	if [ ! -c /dev/pf ]; then
		atf_skip "This test requires pf"
	fi
}

pfsynct_init()
{
	pft_init

	if ! kldstat -q -m pfsync; then
		atf_skip "This test requires pfsync"
	fi
}

pflog_init()
{
	if ! kldstat -q -m pflog; then
		atf_skip "This test requires pflog"
	fi
}

pflow_init()
{
	pft_init

	if ! kldstat -q -m pflow; then
		atf_skip "This test requires pflow"
	fi
}

dummynet_init()
{
	pft_init

	if ! kldstat -q -m dummynet; then
		atf_skip "This test requires dummynet"
	fi
}

pft_set_rules()
{
	jname=$1
	shift

	if [ $jname == "noflush" ];
	then
		jname=$1
		shift
	else
		# Flush all states, rules, fragments, ...
		jexec ${jname} pfctl -F all
	fi

	while [ $# -gt 0 ]; do
		printf "$1\n"
		shift
	done | jexec ${jname} pfctl -f -
	if [ $? -ne 0 ];
	then
		atf_fail "Failed to set PF rules in ${jname}"
	fi
}

pft_cleanup()
{
	vnet_cleanup
}

pfsynct_cleanup()
{
	pft_cleanup
}

is_altq_supported()
{
	sysctl -q kern.features.altq >/dev/null || \
	    atf_skip "Test requires ALTQ"

	while [ -n "$1" ]
	do
		sysctl -q kern.features.altq.${1} >/dev/null || \
		    atf_skip "Test required ALTQ_${1}"
		shift
	done
}

altq_init()
{
	pft_init
	is_altq_supported
}

altq_cleanup()
{
	pft_cleanup
}

# Create a bare router jail.
# This function lacks target configuration.
setup_router_ipv4()
{
	pft_init

	epair_tester=$(vnet_mkepair)
	epair_server=$(vnet_mkepair)

	net_tester=192.0.2.0/24
	net_tester_mask=24
	net_tester_host_router=192.0.2.1
	net_tester_host_tester=192.0.2.2

	net_server=198.51.100.0/24
	net_server_mask=24
	net_server_host_router=198.51.100.1
	net_server_host_server=198.51.100.2

	vnet_mkjail router ${epair_tester}b ${epair_server}a

	ifconfig ${epair_tester}a ${net_tester_host_tester}/${net_tester_mask} up
	route add -net ${net_server} ${net_tester_host_router}

	jexec router ifconfig ${epair_tester}b ${net_tester_host_router}/${net_tester_mask} up
	jexec router sysctl net.inet.ip.forwarding=1
	jexec router ifconfig ${epair_server}a ${net_server_host_router}/${net_server_mask} up

	jexec router pfctl -e
}

# Create a router jail.
# The target for tests does not exist but a static ARP entry does
# so packets to it can be properly routed.
setup_router_dummy_ipv4()
{
	setup_router_ipv4
	jexec router arp -s ${net_server_host_server} 00:01:02:03:04:05
	ifconfig ${epair_server}b up
}

# Create a router and a server jail.
# The server is capable of responding to pings from the tester.
setup_router_server_ipv4()
{
	setup_router_ipv4
	vnet_mkjail server ${epair_server}b
	jexec server ifconfig ${epair_server}b ${net_server_host_server}/${net_server_mask} up
	jexec server route add -net ${net_tester} ${net_server_host_router}
	jexec server nc -4l 666 &
	sleep 1 # Give nc time to start and listen
}

# Create a bare router jail.
# This function lacks target configuration.
setup_router_ipv6()
{
	pft_init

	epair_tester=$(vnet_mkepair)
	epair_server=$(vnet_mkepair)

	net_tester=2001:db8:42::/64
	net_tester_mask=64
	net_tester_host_router=2001:db8:42::1
	net_tester_host_tester=2001:db8:42::2

	net_server=2001:db8:43::/64
	net_server_mask=64
	net_server_host_router=2001:db8:43::1
	net_server_host_server=2001:db8:43::2

	vnet_mkjail router ${epair_tester}b ${epair_server}a

	ifconfig ${epair_tester}a inet6 ${net_tester_host_tester}/${net_tester_mask}up no_dad
	route add -6 ${net_server} ${net_tester_host_router}

	jexec router ifconfig ${epair_tester}b inet6 ${net_tester_host_router}/${net_tester_mask} up no_dad
	jexec router sysctl net.inet6.ip6.forwarding=1
	jexec router ifconfig ${epair_server}a inet6 ${net_server_host_router}/${net_server_mask} up no_dad

	jexec router pfctl -e
}

# Create a router jail.
# The target for tests does not exist but a static NDP entry does
# so packets to it can be properly routed.
setup_router_dummy_ipv6()
{
	setup_router_ipv6
	jexec router ndp -s ${net_server_host_server} 00:01:02:03:04:05
	ifconfig ${epair_server}b up
}

# Create a router and a server jail.
# The server is capable of responding to pings from tester.
setup_router_server_ipv6()
{
	setup_router_ipv6
	vnet_mkjail server ${epair_server}b
	jexec server ifconfig ${epair_server}b inet6 ${net_server_host_server}/${net_server_mask} up no_dad
	jexec server route add -6 ${net_tester} ${net_server_host_router}
	jexec server nc -6l 666 &
	sleep 1 # Give nc time to start and listen
}

# Ping the dummy static NDP target.
# Check for pings being forwarded through the router towards the target.
ping_dummy_check_request()
{
	exit_condition=$1
	shift
	params=$@
	atf_check -s ${exit_condition} ${common_dir}/pft_ping.py \
	    --sendif ${epair_tester}a \
	    --to ${net_server_host_server} \
	    --recvif ${epair_server}b \
	$params
}

# Ping the server jail.
# Check for responses coming back throught the router back to the tester.
ping_server_check_reply()
{
	exit_condition=$1
	shift
	params=$@
	atf_check -s ${exit_condition} ${common_dir}/pft_ping.py \
	    --sendif ${epair_tester}a \
	    --to ${net_server_host_server} \
	    --replyif ${epair_tester}a \
	$params
}