Excerpts from the release notes:
* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.
* ssh(1): allow forwarding Unix Domain sockets via ssh -W.
* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.
* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.
* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.
* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.
* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567
Full release notes at https://www.openssh.com/txt/release-9.4
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
From the release notes:
Changes since OpenSSH 9.3
=========================
This release fixes a security bug.
Security
========
Fix CVE-2023-38408 - a condition where specific libaries loaded via
ssh-agent(1)'s PKCS#11 support could be abused to achieve remote
code execution via a forwarded agent socket if the following
conditions are met:
* Exploitation requires the presence of specific libraries on
the victim system.
* Remote exploitation requires that the agent was forwarded
to an attacker-controlled system.
Exploitation can also be prevented by starting ssh-agent(1) with an
empty PKCS#11/FIDO allowlist (ssh-agent -P '') or by configuring
an allowlist that contains only specific provider libraries.
This vulnerability was discovered and demonstrated to be exploitable
by the Qualys Security Advisory team.
In addition to removing the main precondition for exploitation,
this release removes the ability for remote ssh-agent(1) clients
to load PKCS#11 modules by default (see below).
Potentially-incompatible changes
--------------------------------
* ssh-agent(8): the agent will now refuse requests to load PKCS#11
modules issued by remote clients by default. A flag has been added
to restore the previous behaviour "-Oallow-remote-pkcs11".
Note that ssh-agent(8) depends on the SSH client to identify
requests that are remote. The OpenSSH >=8.9 ssh(1) client does
this, but forwarding access to an agent socket using other tools
may circumvent this restriction.
CVE: CVE-2023-38408
Sponsored by: The FreeBSD Foundation
This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):
This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.
* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.
* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.
The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.
Sponsored by: The FreeBSD Foundation
Release notes are available at https://www.openssh.com/txt/release-8.9
Some highlights:
* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)
* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.
* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.
Future deprecation notice
=========================
A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.
Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Some notable changes, from upstream's release notes:
- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.
Additional integration work is needed to support FIDO/U2F in the base
system.
Deprecation Notice
------------------
OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.
Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985
Compatibility with existing OpenSSL versions is maintained.
Upstream commits:
482d23bcac upstream: hold our collective noses and use the openssl-1.1.x
48f54b9d12 adapt -portable to OpenSSL 1.1x API
86e0a9f3d2 upstream: use only openssl-1.1.x API here too
a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest
cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl.
Trivial conflicts in sshkey.c and test_sshkey.c were resolved.
Connect libressl-api-compat.c to the build, and regenerate config.h
Reviewed by: des
Approved by: re (rgrimes)
MFC after: 2 seeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17444
This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.
