This just stages the kernel and builds a stripped-down rootfs for use
with the Firecracker VMM. At some point in the future the release
engineering team might start publishing these, but initially it's
just here to simplify FreeBSD/Firecracker development and testing.
Note that the rootfs generated:
* Uses an IP address of 10.0.0.2 with a gateway of 10.0.0.1,
* Has sshd enabled,
* Has user "freebsd" with password "freebsd" and a root password
of "root", and
* Is 1 GB in size (but has growfs enabled).
All of those are subject to change without notice; anyone intending to
use FreeBSD/Firecracker in anything remotely resembling a production
environment should talk to cperciva first.
Reviewed by: gjb
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D40956
In EC2, UEFI boots faster than BIOS, but not all amd64 instance types
support UEFI. AMIs need to have their boot mode designated, which
created a dilemma: Faster boots, or wider compatibility?
The recently added "uefi-preferred" option solves this: AMIs can be
marked to use UEFI where it's available, but fall back to BIOS on
instance types which do not support UEFI.
This uses bsdec2-image-upload 1.4.6, which recently landed in the
ports tree.
PR: 265697
Reviewed by: delphij, imp
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D40470
vm.subr's default vm_extra_pre_umount removes /qemu and
/etc/resolv.conf. When vm_extra_pre_umount is overridden these steps
need to be performed in the cloud-specific conf file.
PR: 271602
Reviewed by: dch, lwhsu
Event: Kitchener-Waterloo Hackathon 202305
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40257
Change the vmimage script for zfs to create /home as a dataset
rather than /usr/home, ala change to bsdinstall's zfs script.
Reviewed by: markj
Differential Revision: <https://reviews.freebsd.org/D40111
For someone new to the release bits it's not always clear what files are
being created. Report the disk image name explicitly.
Reviewed by: gjb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39953
This script's goal is to check the system for peripherals that needs
firmware and install the needed packages for them.
For now it only support pci subsystem and only video classes for AMD
and Intel GPUs.
Reviewed by: bapt
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D39825
BBB code was removed from GENERIC kernel as it's not functional.
Stop installing u-boot for a platform that we don't boot on.
Reviewed by: imp, gjb
Approved by: re@ (gjb)
MFC after: never
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D39844
When building ARM release images, enable IPv6 SLAAC by default in
addition to IPv4 DHCP.
Unlike amd64 (and other desktop/server) releases, ARM releases on SoC
setups are usually deployed by just using the installation image, so
there is no interactive network configuration. Not having IPv6
included by default is kind of an anachronism these days, given that
FreeBSD with the KAME project once pioneered IPv6 technology.
MFC after: 2 weeks
And put in it:
- kbdcontrol
- vidcontrol
- moused
- kbdmap
Those aren't useful in a jail or for a modern desktop.
While here, split the devd.conf part into some new files.
Reviewed by: bapt
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38321
This unbloat FreeBSD-utilities a bit and not everyone uses
valectl which is the only in-tree consumer of libnetmap
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38225
It contain all the binaries and libs from the elftoolchain contrib
project except for libelf which is used everywhere.
All of those tools are never used by the average user.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38224
It contains the ctf tools that most users will never use.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38223
And put inetd and its config file in it.
This unbloat a bit FreeBSD-utilities and some people might not
want inetd always installed.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38229
Have liby and libcompat share *-dev and *-lib32_dev rules, and share
*-man rule for libcompat and libelftc. Also correct name substitution
and description for man rules.
Reviewed by: manu
Fixes: 5391bcf0f7 ("pkgbase: Do not record dependency on...")
Fixes: 65fa2fd23b ("pkgbase: Do record dependency on non-...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37964
libelftc is an internal lib so it's never installed.
When building with WITH_MANSPLITPKG=yes the libelftc-man package
will have a dependecy on a non-existent libelftc package.
Sponsored by: Beckhoff Automation GmbH & Co. KG
libcompat only provides a .a which is put in the -dev package.
Add a special record for it so we do not require a dependency on the
non-existent package FreeBSD-libcompat.
Sponsored by: Beckhoff Automation GmbH & Co. KG
shlib_required/provided is enough for the dependencies and this also
causes problems for packages like rescue which shouldn't depend on runtime
at all.
PR: 268063
Sponsored by: Beckhoff Automation GmbH & Co. KG
Provides an OCI (Oracle Cloud Infrastructure) release target for
Oracle's KVM-based VM implementation. Tested using 13.1-RELEASE,
primarily on Ampere CPU on A1.Flex VM shapes, but also works on
amd64 shapes.
- supports cloud-init and custom scripts
- provides a freebsd@ sudo-enabled user
- root user disabled over ssh & console
Approved by: gjb
Reviewed by: emaste
MFS after: 1 week
Sponsored by: The FreeBSD Foundation
Sponsored by: SkunkWerks, GmbH
Technical assistance from: Oracle
Differential Revision: https://reviews.freebsd.org/D34746
liby-dev provides (only) liby.a. liby has no headers or man pages, and
there is no liby package. Add a special case to record no dependency on
the package that does not exist.
PR: 266923
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37429
This will enable VM access to all ZFS feature automatically, only on a
newly installed or provisioned VM or cloud instance.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37283
Deprovision feature of waagent is used for preparing to capture a
running VM and turn it into a VM image. Using it in the process of
building a VM image from scratch will cause some side effects such as
the hostname of the building host getting reset.
Remove calling the deprovision command and use a simpler way to fulfill
the requirements of the Azure VM image.
Sponsored by: The FreeBSD Foundation
The change extends vmimage.subr to handle a new parameter, VMFS, which
should be equal to either "ufs" or "zfs". When it is set to ZFS, we use
makefs to create a bootable pool populated using the same dataset layout
as bsdinstall and "poudriere image" use. The pool can be grown using
the growfs rc.d script, just as in UFS images.
This will make it easy to provide VM and cloud images with ZFS as the
root filesystem. So far I did not do extensive testing of cloud images;
I merely verified that creation of ZFS-based AWS AMIs works and allows
me to create amd64 and arm64 EC2 instances with ZFS as the root
filesystem.
Reviewed by: emaste, gjb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34426
devmatch is useful on standalone machine but not on jails.
Put devinfo(8) and libdevinfo there too.
Differential Revision: https://reviews.freebsd.org/D36229
It's not really useful in a jail or in a mdroot or even if a users
wants to do a full zfs machine.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36227
It is useful to have zfs utilities and lib in a separate package as
it allow users to create image that can support ZFS (i.e. not with
WITHOUT_ZFS in src.conf set) without bloating the default image with
all zfs tools (for example for jails).
Differential Revision: https://reviews.freebsd.org/D36225
For most users it's not needed to boot and they are also
available in the FreeBSD-rescue package in case an update
break and FreeBSD-geom package isn't updated correctly.
Differential Revision: https://reviews.freebsd.org/D36224
It doesn't really make sense to have it in runtime and let's not
bloat utilities more.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D36222
It doesn't really make sense to have it in runtime and let's not
bloat utilities more.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D36221
We need to do a relative link to efi instead of an absolute link into
the build tree.
Sponsored by: Netflix
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D36941
I somehow introduced the typo when extracting one part of D34598.
Reported by: Jose Luis Duran <jlduran@gmail.com>
Fixes: 9871ae6aa9 ("Track kern.ipc.somaxconn -> ...")
Currently the installer is only started on the primary ("high level")
console. For systems where this is the video console and serial consoles
aren't of interest, and headless systems with just a serial console,
this works just fine, but for systems where both video and serial
consoles are present and meaningful this requires the user to select the
right primary console in loader, with the poor user experience of the
system appearing to hang if they leave the wrong one selected. This
notably differs from our multi-user behaviour of spawning getty on every
console, where the only issue with selecting the wrong primary console
is a quieter boot process until the login prompt appears (or the system
crashes).
Instead, use the newly-added runconsoles helper to run the installer on
every console (except for ttyv*, where only ttyv0 will be used). For
interactive installations, any of the consoles can be used, though only
one should be used at a time as no effort is made to avoid multiple
installations running at the same time clobbering each other. If the
Live CD option is selected, the other installers (which should, if the
user is well-behaved, be sitting at the welcome screen) will be killed.
If an automated install is in use, the primary console will be used to
display its output, and the others will direct the user to the primary
console.
Reviewed by: brooks, gjb
Differential Revision: https://reviews.freebsd.org/D36805
This separates out the install media-specific environment (creating
bsdinstall_etc) from actually running the installer on a given console.
This will be used by a future change to start the installer on multiple
consoles.
Reviewed by: brooks, gjb
Differential Revision: https://reviews.freebsd.org/D36803
The cons25w line was added in c991a64747 for pc98, along with reading
MACHINE in order to determine what terminal type to use for VTYs. Commit
2b375b4edd removed this condition, leaving it as always using xterm
for VTYs, but left behind the now-unused MACHINE variable and the
cons25w list entry. Clean these up to be how they were before pc98
support was added.
Note that anyone who really needs a cons25w terminal can still request
it, it's just not listed as a common option.
Reviewed by: imp, brooks
Differential Revision: https://reviews.freebsd.org/D36587
Traditionally, we've used /boot/msdos for the MBR mount point for the SD
images that we produced. For GPT and bsdinstall, we've used
/boot/efi. Migrate to using /boot/efi for MBR as well and add a
/boot/msdos -> /boot/efi symlink for compatibility (which may disappear
before 14.0, but will remain on the stable branches).
When we first created the arm images, there was no EFI booting and the
FAT partion on an MBR image was used to hold the firmware, uboot.bin,
SoC config files and ubldr. When we transitioned to uboot with EFI, we
put the loader files in the same partition. Later we standardized on
/boot/efi at about the same time we added GPT support to the RE produced
images. We left the MRB case as /boot/msdos for legacy reasons and since
it wasn't always EFI. Later, we dropped support of non-EFI booting on
the RE produced images, so the duality of /boot/msdos diminished even
more. Since so little secondary meaning remains, putting it all in
/boot/efi standardizes the location and reflects the RE images
better as using efi-only booting.
In addition, always label the msdosfs partion 'efi'. While a small
misnomer on some systems that store other files in the ESP, it was
requested in review for more consistency for similar reasons to the
mountpoint rename. There was no way to have an 'alias' or 'second label'
here, so this breaks compatibility. Since the images are self-contained,
this was judged to be an acceptable change.
Sponsored by: Netflix
Reviewed by: manu, allanjude, emaste, gjb
Differential Revision: https://reviews.freebsd.org/D36635
This can be useful instead of reboot if installing in a virtual machine,
and the user wants to modify the VM hardware or virtual media mounts
prior to booting into the newly installed system.
Reported by: Juan Manuel Palacios (@jmp_imaginarium on Twitter)
Approved by: philip
Differential Revision: https://reviews.freebsd.org/D36560
This makes it more obvious that the media being booted is an installer
rather than an installed system, which is otherwise hard to distinguish.
It also provides a more user-friendly, and more accurate, prompt.
Reviewed by: gjb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36419
This makes use of the new -N etcupdate flag and merges the resulting
METALOG into base.meta re-rooted to /var/db/etcupdate/current.
Reviewed by: gjb
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D35858
This is in preparation for non-FreeBSD builds where make is GNU make and
so etcupdate needs to know the name of or path to the bmake binary to
use for its own builds.
Reviewed by: gjb
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D35855
This is in preparation for non-FreeBSD and -DNO_ROOT builds. On
non-FreeBSD there is no host etcupdate to use, and -DNO_ROOT will
require additional flags that may not be supported by the host's
etcupdate when building on FreeBSD. Moreover, there's no guarantee
anyway that the host's etcupdate is quite right for the current tree;
upgrading from source only requires that the host's is good enough for
-p which just manually copies master.passwd and group, the rest of the
upgrade is done post-installworld. For example, should a new set of
autogenerated files be added that etcupdate is taught about, the host
won't know about them and so the bootstrapped current tree will
incorrectly contain them, leading to spurious diffs on the installed
system.
Reviewed by: gjb, delphij
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D35853
We do not want CHS-based alignment for VM or SD card release images.
(Other images use makefs/mkimg, not kernel gpart and so do not depend
on this sysctl.)
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
Summary:
This allows installing packages that depend on kerberos libraries
without pulling in all the binaries. It also moves libgssapi to runtime
to allow installing kerbereos libraries without adding a dependancy on
the large utilities package. It makes sense to put libgssapi in runtime
rather than kerberos-lib since this is a plugin layer which is intended
to support any GSS-API mechanisms, not just kerberos.
A good example of a package which uses kerberos libraries without
needing the kerberos utilities is sshd. This uses the kerberos GSS-API
libraries to implement its GSSAPIAuthentication option.
MFC after: 2 weeks
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D36028
BSD stat and GNU stat differ significantly when it comes to using a
custom format string, both in the option name and in the format string
itself. Handle both here (assuming Linux means GNU stat rather than BSD
stat).
Reviewed by: brooks, gjb
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D35814
Our uses of tar rely on BSDisms, and so do not work in environments
where GNU tar is the default tar. Providing a TAR_CMD variable like
some other commands allows it to be overridden to use bsdtar in such
cases.
Reviewed by: brooks, delphij, gjb
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D35813
For some reason, while 3072M is sufficient for 14-CURRENT, it is not
for 13-STABLE. Notably, previous investigations suggest that there
are changes to makefs(8) in main that do not exist in stable/13,
in which 14-CURRENT seems perfectly happy to ignore the target image
size is smaller than the data being populated to it.
I have no futher investigative details at the moment, but as this had
caused arm failures for the past three weeks, this is the more hasty
measure, hence the MFC timeframe noted.
MFC after: 10 minutes
Sponsored by: Rubicon Communications, LLC ("Netgate")
The latest version of the ec2-scripts package includes a completely
rewritten "use EC2 ephemeral disks for swap space" script. Now that
we have something which works on recent versions of FreeBSD, turn it
on since it's a great way to use the ephemeral disks.
Note that the option for controlling this, ec2_ephemeral_swap_enable,
is not the same as the option (ec2_ephemeralswap_enable) used with the
previous ephemeral-swap script; this change was deliberate to avoid
astonishment for users who upgraded their ec2-scripts package and had
a setting left behind in rc.conf.
I assume the original reason for Subversion's inclusion was to checkout
the base system. But now we use git for that.
Reviewed by: gjb
Sponsored by: Axcient
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35329
When running over a serial line we end up defaulting to 80x24, which is
rather cramped for many dialog boxes and occupies very little screen
space for most modern terminals. Thus, run resizewin -z to set the
terminal size if not already known before starting the installer, just
as we do for csh and sh login shells already in their default dotfiles.
Reviewed by: jhb, gjb
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D34414
This sshd_config keyword was replaced by KbdInteractiveAuthentication in
openssh 8.7, though ChallengeResponseAuthentication is silently accepted
as an alias. However, this means that the code in ec2.conf which
modifies a commented-out line no longer does anything. Apply a minimal
fix.
Reviewed by: cperciva, emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34400
This requires two sets of changes. Firstly, for non-FreeBSD, we do not
know where tools are in PATH (and it is likely that some are not in
system directories and have been built as bootstrap tools during the
build), so we should leave PATH alone and trust the user. Secondly,
makefs needs a master.passwd for building images from a METALOG file, so
pass the directory in the image tree to makefs's -N option in order to
pick up a valid FreeBSD master.passwd; this is unnecessary on FreeBSD
(except in the edge case of building an image that refers to users or
groups not present in the host's database, which is unlikely but
technically possible) but harmless so can be done unconditionally.
Reviewed by: brooks, emaste, gjb
Differential Revision: https://reviews.freebsd.org/D34001
This requires a bunch of METALOG mangling to include the files we inject
into the tree. The mkisoimages.sh and make-memstick.sh scripts are now
called with the current directory inside the tree so that the relative
paths in the METALOG match up with the current directory. The scripts do
not require this when not using a METALOG, but for simplicity we always
do so. The Makefile mangles the real METALOG created from the install,
as those files are shared across all uses of the tree, but the shell
scripts create a temporary copy of the METALOG that they mangle as their
tree modifications are specific to that image. We also need to pass -D
to makefs to turn any duplicate METALOG entry errors into warnings, as
we have many (harmless) instances of those.
Whilst dvd1.iso should work, the !NOPKG code will need more work to
support this.
All media will also lack mergemaster and etcupdate trees, since more
work is needed to add -DNO_ROOT modes to them. Users of install media
built this way will have to manually bootstrap them.
Reviewed by: brooks, gjb
Differential Revision: https://reviews.freebsd.org/D33999
Currently the current directory is the parent of the rootfs directory,
but this will change in order to support NO_ROOT builds that use a
metalog manifest, since those need to have the current directory be the
rootfs itself in order for the relative paths to be correct, and we do
not want the non-METALOG case (which passes the directory to makefs) to
pick up leftover temporary .img files from a previous failed build.
Reviewed by: brooks, emaste, gjb
Differential Revision: https://reviews.freebsd.org/D33998
ubldr.bin was obsoleted by our uboot ports last year, so this is
completely unused in the default config (some customers still use
it, but that's not relevant to this script). Don't copy it at all
since it won't be used for re@ produced images.
Sponsored by: Netflix
Reviewed by: kevans, gjb (re@)
Differential Revision: https://reviews.freebsd.org/D34192
It isn't needed and will cause problem when upgrading to a newer release.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33878
Now that root uses /bin/sh as the default shell no need to have csh part
of runtime.
Put it in its own package.
MFC after: never
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33471
And put pkg and its keys in it.
It's easier for small image to depend on this package rather than the
larger utilities one.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33458
It's useful for small image to fetch some data but we don't want to
install utilities nor bloat runtime.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33463
There is no reason that this shouldn't be there.
Change the dependency of caroot from utilities to openssl as it's
the only command that it uses not in runtime.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33458
This allow one to install it without having to install FreeBSD-utilities.
While here put some newsyslog.d file in their own package.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33456
This allow one to not install syslogd and use syslog-ng or any other
syslog daemon.
While here put some syslog.d file in their own package.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33455
While here put the periodic files for some utilities in their own
packages.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33454
And put the mtree binary and files in it.
Useful to create small mfsroot using /etc/rc.d/var without
having to install FreeBSD-utilities.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33442
And put the tcp-wrapper utilities in it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33439
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
Disable Duplicate Address Detection in EC2 instances. The networking
configuration in EC2, with IPv6 addresses assigned by DHCPv6 and
host egress filtering, makes "duplicate addresses" impossible.
This speeds up the boot process in EC2 by 2 seconds.
Reviewed by: kp, imp, bz
MFC after: 2 weeks
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D33091
Imports the changes for building official images on Azure Marketplace,
which fulfill the requirements of Azure and FreeBSD cloud images like
disk layout and UEFI for Gen2 VM, along with some minor improvements like
configurations to speed up booting.
"CLOUDWARE" list will be updated after some more collaborations with re
completed.
Reviewed by: re (gjb)
Sponsored by: The FreeBSD Foundation
Technical assistance from: Microsoft
Differential Revision: https://reviews.freebsd.org/D23804
This reduces the FreeBSD boot time by approximately 5 seconds,
roughly equally divided betwenn two factors:
* Disk I/O is faster in the EFI loader since it can perform larger
I/Os. (The BIOS loader is limited due to the use of bounce buffers
in sub-1M memory.)
* The EFI console is much faster than the VGA console.
Note however that not all EC2 instance types support UEFI; as a
general rule the newer instances (based on Amazon's "Nitro" platform)
support UEFI but the older instances (based on Xen) do not.
X-MFC: TBD based on tradeoff between performance and compatibility
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
The default boot method for amd64 AMIs is BIOS, but at AMI creation
time a flag can be set to specify that UEFI should be used instead.
This commit adds a variable AMIBOOTMETHOD which, if set to "UEFI",
causes the appropriate flag to be set during AMI creation.
The only boot method supported by EC2 for arm64 is UEFI.
The names of AMIs are also amended to include the boot method; they
now look like "FreeBSD 14.0-CURRENT-amd64-20210915 UEFI".
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
ftp tools aren't that useful nowadays but some might want them.
Create a FreeBSD-ftp package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31794
vt files for either keyboards and fonts are totally optional
so create a separate package for them.
Differential Revision: https://reviews.freebsd.org/D31797
mlx* are only useful for users who have a Mellanox card.
Create a package for it so users that don't have this card can
avoid having this program.
Differential Revision: https://reviews.freebsd.org/D31795
cxgbetool is only useful for users who have a Chelsio card.
Create a package for it so users that don't have this card can
avoid having this program.
Differential Revision: https://reviews.freebsd.org/D31793
both telnet and telnetd aren't that useful nowadays but some
might want them.
Create a FreeBSD-telnet package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31791
Reviewed by: emaste
If SSMPREFIX is specified, AMI Ids will be recorded in the SSM
Parameter Store under the name
${SSMPREFIX}/${ARCH}/${FLAVOUR}/${ROOTFS}/${REVISION}/${BRANCH}
where ARCH is "amd64" or "arm64", FLAVOUR is "base" (but may have
other options in the future), ROOTFS is "ufs" (but may have other
options in the future), and REVISION and BRANCH have their normal
meanings.
FreeBSD will be using the public prefix "/aws/service/freebsd",
resulting in SSM Parameter names which look like
/aws/service/freebsd/amd64/base/ufs/14.0/CURRENT
Relnotes: yes
Sponsored by: https://patreon.com/cperciva
MFC after: 2 weeks
This is useful for adding extra packages to the build of an AMI.
For example:
env VM_EXTRA_PACKAGES="zsh" make -C release ec2ami
Approved by: gjb
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Currently pkg(8) will fail to install any package if one is missing, so
make this a loop to prevent one missing package from preventing the rest
from installing. Seen building an AWS AMI for aarch64 on main and
ebsnvme-id is not available in the repo at the moment.
Approved by: gjb
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Per [(1), i.e. test(1), the string comparison operator should be `=`,
not `==` in sh(1) scripts.
No functional change. FreeBSD's test accepts `==` as an alias for `=`
for compatibility with gnu test's `==` extension.
Reviewed by: imp@, gjb@
Pull Request: https://github.com/freebsd/freebsd-src/pull/485
And move all the nfs related commands there.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30754
Sponsored by: Diablotin Systems
This allows to boot out of the box on the RPI COmpute Module 3 with 32G
of eMMC.
Tested by: imp confirmed .dtb is in the rpi-firmware pkg
Reviewed by: gjb@, imp@
Pull Request: https://github.com/freebsd/freebsd-src/pull/452
Sponsored by: Netflix
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
This is useful for upgrade and also to make tiny jail so they won't
depend on FreeBSD-utilities (where openssl was packaged before).
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30081
We do not currently generate armv7 distribution sets, because we don't
build any installer images. However, having such sets available can be
useful for quickly installing a base system, particularly in the case
of creating an armv7 poudriere jail on arm64.
Add a configuration file for the generation of these distribution sets.
Reviewed by: manu, imp, gjb
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D29923
The mangling was present in the initial revision of the script, but its
purpose is not clear. It may have been to avoid defining make(1)
variables with a dash in the name, but this is permitted. Furthermore,
it results in invalid dependency information if a dependency's name
contains an underscore, causing e.g., libcompiler_rt-dev to depend on
libcompiler-rt, and resulting in warnings when installing base system
packages. Remove the mangling.
Reviewed by: manu
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29883
To support -DNO_ROOT work. The top-level installworld target creates a
new METALOG starting with `#mtree 2.0` so it needs to be first, to avoid
overwriting installkernel METALOG entries.
Reviewed by: gjb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29582
make "vital" a replaceable, which defaults to "false" and only set it for
the main clib, utilities and runtime packages, not their sub-packages
PR: 254174
Differential Revision: https://reviews.freebsd.org/D29224
Recent mkimg changes forces to have partitions given in explicit order.
This is so we can have the first partition starting at a specific offset
and the next ones starting after without having to specify an offset.
Switch the partition in the mkisoimage.sh script so the first one created
is the isoboot one.
PR: 254490
Reported by: Michael Dexter <editor@callfortesting.org
Tested by: Vincent Milum Jr <freebsd@darkain.com>
MFC after: Right now
Sync determining the git count with newvers.sh by adding the
--first-parent argument. This ensures uname(1) reflects the
file name for snapshots.
Reported by: Mark Millard
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Remove tmpfs size limitation, this breaks make installworld and installation of some packages
Format generated fstab using tabs to make it consistent and readable
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29283
Man pages can be big in total, add an options to split man pages
in -man packages so we produce smaller packages.
This is useful for small jails or mfsroot produced of pkgbase.
The option is off by default.
Reviewed by: bapt, Mina Galić <me@igalic.co>
Differential Revision: https://reviews.freebsd.org/D29169
MFC after: 2 weeks
They aren't needed and produce wrong package comments :
We use to have "runtime-dev package" instead of
"FreeBSD Base System (Development Files)" for example
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29168
MFC after: 2 weeks
Pass UNAME_r override to make(1) for ports builds when building
ports for another branch.
MFC after: 3 days
MFC with: 0be274d373, 80ab50e1de, c883b6fd8c
Sponsored by: Rubicon Communications, LLC ("Netgate")
truncate(1) is not case-sensitive with regard to setting the size
of a file. makefs(8), however, does not honor upper-case values.
Update release-specific files and the release(7) manual page to
reflect this.
MFC with: 1ca8842f3a
Submitted by: ehem_freebsd_m5p.com (original)
Differential Review: https://reviews.freebsd.org/D28979
Sponsored by: Rubicon Communications, LLC ("Netgate")
This had prevented the bootconfig step from determining if an ESP exists,
resulting in its unconditional setup. On BIOS-booted amd64, this wasn't
harmful, just unnecessary, but it resulted in failed installations on
non-EFI-supporting platforms like powerpc64.
MFC after: 3 days
In followup to 80ab50e1de,
export UNAME_r in Makefile.inc1 instead of Makefile.vm.
MFC after: 3 days
MFC with: 80ab50e1de
Sponsored by: Rubicon Communications, LLC ("Netgate")
Using makefs instead reduces the privileges needed to build VM images,
simplifies the script (no need to copy files to a fresh image at the end),
and improves portability by allowing generation of cross-endian images.
As a result of the last, this patch also adds support for generation of
powerpc64 and powerpc64le VM images.
No other changes to the output. Tested and working for both amd64 and
powerpc64 targets.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D28912
These images only ever worked on Apple Powermacs, which are now a very
old platform, and did so only for a very loose definition of "worked"
(they booted on a small subset of supported machines). Moreover, all
the machines they *did* boot on also would boot from a memstick made
by dd'ing an CD image to a flash drive. Since a flash drive prepared
in this way would also boot all the newer systems we support, the
memstick images were strictly less functional than the CD images, even
for booting from memory sticks.
Reviewed by: jhibbits
MFC after: 1 week
Following 7b1d1a1658, the structure
for the reldoc target has significantly changed as result of the
ASCIIDoctor/Hugo migration. As the release notes related files
on the installation medium are inherently out of date, purge them
entirely.
Discussed within: re, doceng
No objection: re (silence), doceng (silence)
Timeout: 2 weeks
MFC after: 1 week
MFC to: stable/13, stable/12, and stable/11 only
Sponsored by: Rubicon Communications, LLC ("Netgate")
Add PBUILD_FLAGS and UNAME_r overrides to extra_chroot_setup()
to fix building ports for 14-CURRENT builds on 13.x.
MFC after: 3 days
MFC with: c511a5ab53
Sponsored by: Rubicon Communications, LLC ("Netgate")
The 'reldoc' target includes release-related documentation on
installation medium. Since the switch from XML to ASCIIDoctor,
the file locations have moved, and it will take some time to sort
out how this target should work now.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
The ports tree is scheduled to be converted from Subversion to Git
after the currently-scheduled 13.0-RELEASE, so the source of truth
will be Subversion for the ports tree.
Implement a hack specifically for this case.
Sponsored by: Rubicon Communications, LLC (netgate.com)
