Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
Currently the PROCEXEC event only reports a single address, entryaddr,
which is the entry point of the interpreter in the typical dynamic case,
and used solely to calculate the base address of the interpreter. For
PDEs this is fine, since the base address is known from the program
headers, but for PIEs the base address varies at run time based on where
the kernel chooses to load it, and so pmcstat has no way of knowing the
real address ranges for the executable. This was less of an issue in the
past since PIEs were rare, but now they're on by default on 64-bit
architectures it's more of a problem.
To solve this, pass through what was picked for et_dyn_addr by the
kernel, and use that as the offset for the executable's start address
just as is done for everything in the kernel. Since we're changing this
interface, sanitise the way we determine the interpreter's base address
by passing it through directly rather than indirectly via the entry
point and having to subtract off whatever the ELF header's e_entry is
(and anything that wants the entry point in future can still add that
back on as needed; this merely changes the interface to directly provide
the underlying variables involved).
This will be followed up by a bump to the pmc major version.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D39595
This unifies the user object and kernel module paths in libpmcstat,
allows modules loaded from non-standard locations (e.g. from a user's
home directory when testing) to be found and, since buffer is what all
the warnings here use (they were never updated when buffer_modules were
added to pick based on where the file was found) has the side-effect of
ensuring the messages are correct.
This includes obsoleting the now-superfluous -k option in pmcstat.
This change breaks the hwpmc ABI and will be followed by a bump to the
pmc major version.
Reviewed by: jhb, jkoshy, mhorne
Differential Revision: https://reviews.freebsd.org/D40048
- Refine the checks for ARM mapping symbols and apply them on arm64 as
well as 32-bit arm. In particular, mapping symbols can have
additional characters and are not strictly limited to just "$a" but
can append additional characters (e.g. "$a.1"). Add "$x" to the
list of mapping symbol prefixes.
- Clear the LSB of function symbol addresses. Thumb function
addresses set the LSB to enable Thumb mode. However, the actual
function starts at the aligned address with LSB clear. Not clearing
the LSB can cause pmcannotate to pass misaligned addresses to
objdump when extracting disassembly.
Reviewed by: andrew
Obtained from: CheriBSD
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34416
hwpmc has been utterly broken for userspace binaries, and has been
labeling all samples from userspace binaries as dubious frames. The
issues are that:
-The check for ph.p_offset & (-ph.p_align) == 0 was mostly bogus. The
intent was to ignore all executable segments other than the first,
which when using BFD appeared in the first page, but with current LLD
a read-only data segment appears before the executable segment,
pushing the latter into the second page or later. This meant no
executable segment was ever found, and thus pi_vaddr remained
0. Instead of relying on BFD's layout, track whether we've seen an
executable segment explicitly with a local bool.
-Shared libraries were not parsing the segments to calculate pi_vaddr,
resulting in it always being 0. Again, when using BFD, the executable
segment started at the first page, and so pi_vaddr was genuinely
meant to be 0, but not with LLD's current layout. This meant that
pmcstat_image_link's offset calculation gave the base address of the
segment in memory, rather than the base address of the whole library
in memory, and so when adding that to pi_start/pi_end to get the
range of the executable sections in memory it double-counted the
offset of the first executable segment within the library. Thus we
need to do the exact same parsing for ET_DYN as we do for ET_EXEC,
which is simpler to write as special-casing ET_REL to not look for
segments. Note that, whilst PT_INTERP isn't needed for shared
libraries, it will be for PIEs, which pmcstat still fails to handle
due to not knowing the base address of the PIE; we get the base
address for libraries by MAP_IN events, and for rtld by virtue of the
process's entry address being rtld's, but have no equivalent for the
executable.
Fixes courtesy of jrtc27@.
Reviewed by: jrtc27, jhb (earlier version)
Differential Revision: https://reviews.freebsd.org/D33055
Sponsored by: Netflix
PowerPC kernel is of DYN type and it has a base address where it is
initially loaded, before being relocated. As the start address passed to
pmcstat_image_link() is where the kernel was relocated to, but the symbols
always use the original base address, we need to subtract it to get the
correct offset.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26114
The -I option (and hotkey) is reused for this. Skipping symbol resolution is
moved to the new -A option (and hotkey).
While arguably this violates POLA I think it's a change for the better.
ALso note the -I option was added in head.
Differential Revision: https://reviews.freebsd.org/D21658
Modules from ports/pkg are commonly installed to /boot/modules rather than to
the same directory the kernel resides in. Look there if a module is not found
next to the kernel.
Submitted by: mmacy
Reported by: Nick Principe <nap@iXsystems.com>
Approved by: mmacy (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
Squashed commit of the following:
commit 4459d43eff815bec08ccc5533dbe5de846f03128
Author: Matt Macy <mmacy@mattmacy.io>
Date: Sat May 26 00:06:31 2018 -0700
libpmc: fix pmu function signatures for non amd64
commit a2cb8bbc586c65d41f9b291430a2261ec67b59fe
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:38:11 2018 -0700
pmcstat: fix indentation of usage
commit f686954b15ff56a833ac80404898977cb80a265b
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:49 2018 -0700
pmclog(3): add callchain and pmcallocatedyn, remove pcsample
commit 73e13a0d2e9498c81c150d14d022050cee7511bb
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:00 2018 -0700
pmclog.h: GC pcsample field
commit 3e93ffd65da641fa657539dad3c48e281f8b5798
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:05:57 2018 -0700
hwpmc: make Intel core CPUs use external event tables
commit 634f5fae1e1644ac324003136c66cd9c619d1c93
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:00:06 2018 -0700
pmclog: update log record types, bump PMC_MAJOR
- explicitly make log record types a multiple of 8 bytes
- hook in pmu event types for pmc_allocate records
- remove references to no longer PCSAMPLE record
commit 83d84fcd2d65bdf6ddcb2e155a22f0cfa2a9c225
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 21:52:10 2018 -0700
libpmc: add support for having vendor table driven pmc_allocate
commit 9e6ad63c40c2fce8404847ace5078ca6cb33a736
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:11:33 2018 -0700
hwpmc_core: add accessors for EVSEL & UMASK, make IAP_UMASK useful to user
commit 859dceb93daa6419a48c794db99b6758e5b041c9
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:09:45 2018 -0700
pmcstat: update usage and man page as well as make -L consistent with pmccontrol
commit 79c7d8597e28c2eb13f5f9113e65ec2792ca57b1
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 18:07:03 2018 -0700
pmu_util: add support for all current intel event keywords
commit d8089c7f6a6c8527f38324252b1ffb47004694c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:45:00 2018 -0700
add description for new arguments
commit 058336740bab53c62ec88a3a026ea848cf3878c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:38:15 2018 -0700
libpmc: move pmu_events table and pmu_utils out of libpmcstat so that they can be used by pmc_allocate
commit 049b66b382e2f833c3f47bc8df9e750cb265709f
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:12:41 2018 -0700
pmcstat: hook pmu_events counter description utility routines in
commit f5e01e7b37a691dc045e1aa16b3ebdd162515de8
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:11:59 2018 -0700
pmu_events: add utility routines for listing counters and their descriptions
commit cba4d4f8907f772279f86f18f915e0d74d33ac56
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:09:50 2018 -0700
pmu-events: expand out skylake regex to simplify string matches
The tool is built separately in buildworld in a subdirectory rather than
how other build-tools are done. Subdirectory builds in lib/libpmcstat
remain broken since the tool cannot be auto-built from here.
on thread in post-processing.
To generate stacks for just ${THREADID}:
pmcstat -R ${PREFIX}.pmcstat -L ${THREADID} -z100 -G ${PREFIX}.stacks
Sponsored by: Limelight Networks
to the next int position.
Bug was introduced in r324959 ("Extract a set of pmcstat functions and
interfaces to the new internal library -- libpmcstat.")
This fixes pmcstat top mode (-T) operation.
Example: pmcstat -n1 -S clock.hard -T
Reported by: Peter Holm <peter@holm.cc>
Sponsored by: DARPA, AFRL
library -- libpmcstat.
This includes PMC logging module, symbols lookup functions,
ELF parsing, process management, PMC attachment, etc.
This allows to reuse code while building new hwpmc(4)-based applications.
Also add pmcstat_symbol_search_by_name() function that allows to find
mapped IP range for a given function name.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12718
