Caller functions expect __elfN(loadimage) to return a value of zero on
failure and the file size on success.
PR: 256390
Reviewed by: markj
MFC after: 2 weeks
The gfx_fb_drawrect() is drawing rectangle by pixels, this can be very
slow on some systems. Use Blt() video fill primitive instead.
Testing done: Tested on mac mini 2012 where the issue was revealed
Reviewed by: yuripv
MFC after: 1 week
When drawing cursor, we should store original display
content because there may be image data we would like to restore
when the cursor is removed.
PR: 254054
Reported by: Jose Luis Duran
MFC after: 3 days
Calculate font size from 16 density independent pixels (dp) by using:
size = 16 * ppi/160 * display_factor
We are specifying font size 16dp, and assuming 1dp = 160ppi.
Also apply scaling factor 2 (display_factor).
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28849
The VT screen buffer size is calculated based on our default
built in (8x16) font.
With high-resolution display, we want to use at least 8x16 font,
or we will have large unused areas on screen.
MFC after: 1 week
BORDER_PIXELS is left over from picking up the source from illumos
port. Since FreeBSD VT does not use border in terminal size
calculation, there is no reason why should loader use it.
MFC after: 1 week
While loading kernel, we check if vt/vbe backend support is included in
kernel and set the tg_kernel_supported flag in gfx_state. unload
command needs to reset this flag to allow next load to perform
this check with new kernel.
Reported by: jhb
On i386, after 6c7a932d0b, the vbefb vt
driver was no longer detected by the loader, if any kernel module was
loaded after the kernel itself.
This was caused by the parse_vt_drv_set() function being called multiple
times, resetting the detection flag. (It was called multiple times,
becuase i386 .ko files are shared objects like the kernel proper, while
this is not the case on amd64.)
Fix this by skipping the set_vt_drv_set lookup if vbefb was already
detected.
Reviewed by: tsoome
There is no need to keep multiple copies of the relocation code. The
amd64 code works on arm64 with a few small changes to relocation types.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28213
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
For the first second otime and ntime are equal so no message gets
printed. Instead we should print the countdown right from the start,
although we do it at the end of the first iteration so that if a key has
already been pressed then the message is suppressed.
Reviewed by: imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D26935
This is nearly a 1:1 mapping of the pager API from libsa. The only real
difference is that pager.output() will accept any number of arguments and
coerce all of them to strings for output using luaL_tolstring (i.e. the
__tostring metamethod will be used).
The only consumer planned at this time is the upcoming "show-module-options"
implementation.
MFC after: 1 week
Extend the powerpc relative relocation handling from r240782 to a
handful of other architectures. This is needed to properly read
dependency information from kernel modules.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26365
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
Move hexdump from stand/common/misc.c to stand/libsa/hexdump.c
(svn cp)
Disable use of pager - causes linking issue for boot1
can be re-enabled by defining HEXDUMP_PAGER.
Reviewed by: stevek, imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D26235
When building on macOS with sh==zsh, newvers.sh was producing an
unterminated string literal due to \\n being turned as a newline. Fix this
by using a here document instead.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D26036
Fix typo in interp_include() invocation (missing 'p')
Remove setting tftpip, as servip is used by the tftp code in libsa. There
is no separate tftpip global variable any more.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25897
This implementation doesn't have any major deviations from the other EFI
ports. I've copied the boilerplate from arm and arm64.
I've tested this with the following boot flows:
OpenSBI (M-mode) -> u-boot (S-mode) -> loader.efi -> FreeBSD
OpenSBI (M-mode) -> u-boot (S-mode) -> boot1.efi -> loader.efi -> FreeBSD
Due to the way that u-boot handles secondary CPUs, OpenSBI >= v0.7 is required,
as the HSM extension is needed to bring them up explicitly. Because of this,
using BBL as the SBI implementation will not be possible. Additionally, there
are a few recent u-boot changes that are required as well, all of which will be
present in the upcoming v2020.07 release.
Looks good: emaste
Differential Revision: https://reviews.freebsd.org/D25135
These are picked out by the amd64-gcc6 build; time() is declared in <time.h>
and delay() is declared in <bootstrap.h>. These are the correct places for
these in stand/, so remove the duplicate declarations and make sure the
delay() consumer in libefi that depended on the extra delay() declaration
includes <bootstrap.h>.
MFC after: 1 week
Having libzfs.h wrapped in LOADER_ZFS_SUPPORT check does not really make sense,
because we do need function declarations with C99.
Sponsored by: Netflix, Klara Inc.
Rework to simplify and impose sane url syntax.
That is we allow for file://[devname[:fstype]]/package
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D25134
The filename is nearly always wrong since it's /boot/lua/loader.lua, which
is not useful for diagnostics. The actual errmsg will include a lua filename
if this is relevant.
Dropping "LUA" while we're here because that's almost universally
irrelevant to whatever error follows, unless the error states that it's
actually a lua problem.
Both of these are minor nits that just detract from identifying the
pertinent information.
MFC after: 3 days
Some time after r338418, I believe with -Os/-Oz -ffunction-sections
-fdata-sections, the bootprog_interp variable that held our "$Interpreter:"
marker started getting strip from all loaders, with exception to userboot
since it used bootprog_interp to determine what flavor of userboot it was.
At some point, it had been brought to my attention that this was no longer
working and I had worked up some potential solutions to use the variable
that involved printing it out. My vague recollection is that this was
rejected, and I forgot to explore the alternatives; I cannot find records of
this discussion anymore.
Fast forward to present day, Andrew reported that it was non-functional and
offered (effectively) this patch (sans comment) to stop the compiler from
optimizing it out by assigning it to a volatile variable. This removes
concerns about user-facing change while retaining the interpreter marker.
Furthermore, it could certainly be uglier.
Reported and tested by: Andrew Gierth <andrew_tao173.riddles.org.uk>
MFC after: 3 days
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
we have crc32(const void *, size_t) in libsa. Unfortunately zlib has
crc32(long, const unigned char *, unsigned) and we have conflict.
Since we do build libsa with zlib, we can use zlib version instead.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D24068
armv7 crash due to misligned access of dos_partition dp_start field.
Allocate and make copy of dos_partition array to make sure the data
is aligned.
Reported by: marklmi at yahoo.com
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
If we hit an error at this level, we are almost certainly not in any kind
of sane state where autoboot can do the right thing. Instead of letting it
try and probably failing, disable autoboot so they immediately get kicked
into a loader prompt for manual remediation/diagnosis.
Reviewed by: tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23611
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Multiple places coordinate to 'know' where lua scripts are installed. Knock
this down to being formally defined (and overridable) in exactly one spot,
defs.mk, and spread the knowledge to loaders and liblua alike. A future
commit will expose this to lua as loader.lua_path, so it can build absolute
paths to lua scripts as needed.
MFC after: 1 week
Summary:
There is logic in ELF loadimage() to relocate kernels, but currently
only type ET_EXEC. PowerPC kernels are ET_DYN, and can be relocated anywhere.
Add the load offset to kernel entry points on this platform.
Reviewed by: imp, ian
Differential Revision: https://reviews.freebsd.org/D21286
libsecureboot can tell us if the most recent file opened was
verfied or not.
If it's state is VE_UNVERIFIED_OK, skip if variable
matches one of the restricted prefixes.
Reviewed by: stevek
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D20909
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
The D_PARTNONE is documented to make it possible to open raw MBR
partition, but the current disk_open() does not really implement this
statement.
The current code is checking partition against -1 (D_PARTNONE) but does
attempt to open partition table in case we do have FreeBSD MBR partition type.
Instead, we should check -2 (D_PARTWILD).
In case we do have MBR + BSD label, this code is only working because
by default, the first BSD partiton is created starting with relative sector
0, and we can still access the BSD table from that MBR slice.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20501
* Fix boot env back compat
zfsboot must try zfsloader before loader in order to remain compatible
with boot environments created prior to zfs functionality being rolled
into loader proper.
* Improve comments in zfsboot
Explain the significance of the load path order, and put the comment
about looping through the paths in the appropriate scope.
Obtained From: TrueNAS commit 4c60c62fcf0b6b6eac98ee8d46e7bbea64bc86f5
Submitted by: Ryan Moeller <ryan@freqlabs.com>
loader.rc has comment lines without a trailing space, which get
interpreted as commands. Avoid this by only matching against the
backslash character.
Reviewed by: imp, tsoome
Differential Revision: https://reviews.freebsd.org/D20491
This adds some new commands to loader :
- pnpmatch
This takes a pnpinfo string as argument and tries to find a kernel module
associated with it. -v and -d option are available and are the same as in
devmatch (v is verbose, d dumps the hints).
- pnpload
This takes a pnpinfo string as argument and tries to load a kernel module
associated with it.
- pnpautoload
This will attempt to load every kernel module for each buses. Each buses are
probed, the probe function will generate pnpinfo string and load kernel module
associated with it if it exists.
Only simplebus for FDT system is implemented for now.
Since we need the dtb and overlays to be applied before searching the tree
fdt_devmatch_next will load and apply the dtb + overlays.
All the pnp parsing code comes from devmatch and is the same at 99%.
Reviewed by: imp, kevans
Differential Revision: https://reviews.freebsd.org/D19498
This change properly terminates the formatting string quote modification done
in r348005, which is triggered when `ELF_VERBOSE` is defined.
MFC with: r348005
Reported by: ci (amd64, gcc)
file_loadraw():
check for file_alloc() and strdup() results.
we leak 'name'.
mod_load() does leak 'filename'.
mod_loadkld() does not need to check fp, file_discard() does check.
Since the partition/slice names do vary in length, check the length
of the fixed part of the line against 3 * 8, if the lenth is less than
3 tab stops, print out extra tab.
use snprintf() instead of sprintf.
The bug and patch is reported against 11.2, but it is good idea to have
the check in place for all versions.
PR: 236585
Submitted by: john@feith.com
Reported by: john@feith.com
MFC after: 1 day
These three cases dovetail with other places in the code where we use
or set D_PARTISGPT when we mean that the partitioning scheme is
GPT. Use this #define to make the code easier to undertand.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D20122
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
The disk_open() function searches for "the best partition" when slice and
partition information is not provided as part of the device name. As of
r345477 the slice and partition fields of a disk_devdesc are initialized to
D_SLICEWILD and D_PARTWILD; in the past they were initialized to -1, which
was sometimes interpreted as meaning 'wildcard' and sometimes as 'open the
raw partition' depending on the context. So as an unintended side effect of
r345477 it became basically impossible to ever open a disk or partition
without doing the 'best partition' search. One visible effect of that was
the inability to open the raw disk to read the partition table correctly in
zfs_probe_dev(), leading to failures to find the zfs pool unless it was on
the first partition.
Now instead of always initializing slice and partition to wildcards, the
disk_parsedev() function initializes them based on the presence of a
path/file name following the device. If there is any path or filename
following the ':' that ends the device name, then slice and partition are
initialized to D_SLICEWILD and D_PARTWILD. If there is nothing after the
':' then it is considered to be a request to open the raw device or
partition itself (not a file stored within it), and the fields are
initialized to D_SLICENONE and D_PARTNONE.
With this change in place, all the tests in src/tools/boot are succesful
again, including the recently-added cases of booting from a zfs pool on
a partition other than slice 1 of the device.
PR: 236981
346002 did miss the fact that we do not only undo the loadaddr, but also
we need to remove the inserted module. Implement file_remove() to do the job.
MFC after: 1w
The last_file variable is used to reset the loadaddr variable back to original
value; however, it is possible the last_file is NULL, so we can not blindly
trust it. But then again, we can just save the original loadaddr and use
the saved value for recovery.
MFC after: 1w
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Differential Revision: https://reviews.freebsd.org/D19262
The loader indended to search the kernel file name (only) for . but
instead searched the entire path, so paths like
"boot/test.elfv2/kernel" would not work.
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19658
During initialization of the forth interpreter
the loader looks for "/boot/boot.4th"
and executes any code found there.
That file was loaded bypassing verification.
Add a call to verify_file to change that.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Some of these files using <FOO>_DEBUG defined a DEBUG() macro to serve as a
debug-printf. -DDEBUG is useful to enable some debugging output across
multiple ELF/common parts, so switch the DEBUG-as-printf macros over to
something more like DPRINTF that is more commonly used for this kind of
thing and less likely to conflict.
userboot/elf64_freebsd debugging also assumed %llx for uint64; use PRIx64
instead.
MFC after: 1 week
This relies on libbearssl and libsecureboot
to verify files read by loader in a maner equivalent
to how mac_veriexec
Note: disabled by default.
Use is initially expected to be by embeded vendors
Reviewed by: emaste, imp
Sponsored by: Juniper Networks
Differential Revision: D16336
the size field and a tab between the partition type and the size.
Changes this
disk devices:
disk0 (MMC)
disk0s1: DOS/Windows 49MB
disk0s2: FreeBSD 14GB
disk0s2a: FreeBSD UFS 14GB
disk0s2b: Unknown 2048KB
disk0s2d: FreeBSD UFS 2040KB
to this
disk devices:
disk0 (MMC)
disk0s1: DOS/Windows 49MB
disk0s2: FreeBSD 14GB
disk0s2a: FreeBSD UFS 14GB
disk0s2b: Unknown 2048KB
disk0s2d: FreeBSD UFS 2040KB
I'm pretty sure this used to work at one time, perhaps long ago. It has
been failing recently because if you call disk_open() with dev->d_partition
set to -1 when d_slice refers to a bsd slice, it assumes you want it to
open the first partition within that slice. When you then pass that open
dev instance to ptable_open(), it tries to read the start of the 'a'
partition and decides there is no recognizable partition type there.
This restores the old functionality by resetting d_offset to the start
of the raw slice after disk_open() returns. For good measure, d_partition
is also set back to -1, although that doesn't currently affect anything.
I would have preferred to make disk_open() avoid such rude assumptions and
if you ask for partition -1 you get the raw slice. But the commit history
shows that someone already did that once (r239058), and had to revert it
(r239232), so I didn't even try to go down that road.
net_open previously casted the first vararg to a char * and this was
half-OK: at first, it is passed to netif_open, which would cast it back to
the struct devdesc * that it really is and use it properly. It is then
strdup()d and used as the netdev_name, which is objectively wrong.
Correct it so that the first vararg is properly casted to a struct devdesc *
and the netdev_name gets set properly to make it more clear at a glance that
it's not doing something horribly wrong.
Reported by: mmel
Reviewed by: imp, mmel, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19206
the malloc()/free() as well as having potential of softening the handling
in case error is detected down to a mere warning as compared to hard panic
in free().
Submitted by: tsoome
Differential Revision: https://reviews.freebsd.org/D18299
The ptable_*read() functions return NULL on read errors (and partition table
closed as an side effect). The ptable_open must check the return value and
act properly.
PR: 232483
Reported by: lev
Reviewed by: lev,cem
Differential Revision: https://reviews.freebsd.org/D17890
The disk access is validated by using partition table definitions, therefore
we have no need for if statements, just set the disk size.
Of course the partition table itself may be incorrect/inconsistent, but if
so, we are in trouble anyhow.
Differential Revision: https://reviews.freebsd.org/D17822
The switch to lualoader creates a problem with userboot: the host is
inclined to build userboot with Lua, but the host userboot's interpreter
must match what's available on the guest. For almost all FreeBSD guests in
the wild, Lua is not yet available and a Lua-based userboot will fail.
This revision updates userboot protocol to version 5, which adds a
swap_interpreter callback to request a different interpreter, and tries to
determine the proper interpreter to be used based on how the guest
/boot/loader is compiled. This is still a bit of a guess, but it's likely
the best possible guess we can make in order to get it right. The
interpreter is now embedded in the resulting executable, so we can open
/boot/loader on the guest and hunt that down to derive the interpreter it
was built with.
Using -l with bhyveload will not allow an intepreter swap, even if the
loader specified happens to be a userboot with the wrong interpreter. We'll
simply complain about the mismatch and bail out.
For legacy guests without the interpreter marker, we assume they're 4th.
For new guests with the interpreter marker, we'll read it and swap over
to the proper interpreter if it doesn't match what the userboot we're using
was compiled with.
Both flavors of userboot are installed by default, userboot_4th.so and
userboot_lua.so. This fixes the build WITHOUT_FORTH as a coincidence, which
was broken by userboot being forced to 4th.
Reviewed by: imp, jhb, araujo (earlier version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D16945
Previously lualoader would remain silent, rather than printing
command_errmsg or noting that a command had failed or was not found.
Approved by: re (gjb)
We no longer really need a separate zfsloader. It was useful when we
were first supporting ZFS and had limited ability to properly boot off
of ZFS without the special boot loader. Now that the boot loader has
matured, go the way loader.efi pioneered and just build one
binary. Change the name of the loader to load in the secondary boot
blocks to be just /boot/loader. Provide a symbolic link from zfsloader
to loader so people who have not upgraded their boot blocks are not
affected. This has the happy benefit of making coexistence easier as
well (fewer binaries in the matrix).
Discussed with: allanjude@, kevans@
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
Eliminate 4 of the copies of the arg parsing in /boot/laoder
by using boot_parse_cmdline.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
While ../zfs/libzfs.h mostly works, there are a few situations where
it does not. Eliminate the problem by using plain libzfs.h, like we do
for ufs support. This fixes the weird cases, and is easier to
understand. It also follows the general style convetion of avoiding
../ in #includes.
If a disk is of an oddball size, like the 200mb + 512b used in rootgen.sh,
when disk_open() is called on a GELI encrypted partition, attempts to read
the partition table fail, as they pass through the decryption process which
turns the already plaintext data into jibberish.
When reading the partition table, always pass a slice and partition setting
of -1, and an offset of 0. Setting the slice to -1 prevents a false
positive when checking the slice against the cache of GELI encrypted
slices.
Reviewed by: imp, ian
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15847
e.g. boot_mute, boot_single, boot_verbose, and friends; we checked for these
in multiple places, consolidate into common/ and allow a setting of "NO" for
any of these to turn them off. This allows systems with multiple
loader.conf(5) or loader.conf(5) overlay systems to easily turn off
variables in later processed files by setting it to NO.
Reported by: Nick Wolff @ iXsystems
Reviewed by: imp
r330809 replaced duplication of devdesc struct fields with an embedded copy
of the devdesc struct, to avoid fragility. That means all the scattered
comments indicating that structs must match are no longer valid. Likewise
asserts that attempted to mitigate some of the old fragility.
Reviewed by: imp@
* Make autoboot() a static function in stand/common/boot.c, so it does
not shadow local variables in gptboot.c and zfsboot.c.
* Remove -Winline from the Makefiles for gptboot, gptzfsboot and
zfsboot, as gcc will always fail to inline some functions, and there
is nothing we can do about it.
* For gcc <= 4.2.1, silence -Wuninitialized for isoboot, as it produces
a false positive warning.
* Remove deprecated and unnecessary -mcpu=i386 flag from stand/defs.mk,
as there is already a -march=i386 flag further in the file.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15628
r329190; sparc64 kernels are always 64-bit but with that revision
in place, the loader was treating them as 32-bit ones.
- In order to reduce the likelihood of this kind of breakage in the
future, #ifdef out md_load() on sparc64 and make md_load_dual() -
which is currently local to metadata.c anyway - static.
- Make md_getboothowto() - also local to metadata.c - static.
- Get rid of the unused DTB pointer on sparc64.
Even though we don't use it, it appears something else requires it to
be != 0 to work. This breaks tftp boot in loader.efi, so revert until
that can be sorted out.
Since we do free subtopic and desc in help_getnext(), we need to set them also
NULL, so we make sure we dont get double free().
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D15082
With r328289 we attempt to make sure we free the resources allocated in
help_getnext(), however, it is possible that we get no resources allocated
and help_getnext() will return early.
Make sure we have pointers set to NULL early in help_getnext().
Reported by: Andy Fiddaman
When booted via isoboot(8) loader will be handed a disk that simply contains
an ISO9660 image. Currently this confuses it greatly. Teach it how to spot
that it's in this situation and that ISO9660 has one "partition" covering
the whole disk.
Reviewed by: imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14915
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.
For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.
All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.
As noted in D14267 load_elf.c has a variety of indentation styles. Move
to standard 8 column hard tab indents, 4 space second level indents.
Also includes some whitespace cleanups found by clang-format.
There's no reason to have multiple copies of lszfs and
reloadbe. Consolidate them into one location. Also ldi_get_size is the
same everywhere (except sparc64). Make it the same everywhere as the
common definition is more general and will work on spar64.
If we failed to execute the input line as pure lua, run the command through
parse for consistent argument parsing. Pass the parsed arguments through to
a global "cli_execute" written in Lua, which is expected to either handle it
or pass it back through to interp_builtin_cmd (via loader.command).
lua-handled cli commands will then exist as globals in whatever module they
most belong in, and invocations at the loader prompt will magically dispatch
to them if they exist.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14450
metadata load files were consolidated in r329190, and these relocation fixup
bits were inadvertently dropped in the process. Re-add them to fix boot with
ubldr.
Glanced over by: jhibbits
X-MFC-With: r329190
Summary:
All metadata.c files are very similar, with only trivial changes. Unify them
into a single common file, with minor special-casing where needed.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D13978
liblua glues the lua run time into the boot loader. It implements all
the runtime routines that lua expects. In addition, it has a few
standard 'C' headers that nueter various aspects of the LUA build that
are too specific to lua to be in libsa. Many refinements from the
original code to improve implementation and the number of included lua
libraries. Use int64_t for lua_Number. Have "/boot/lua" be the default
module path. Numerous cleanups from the original GSoC project,
including hacking libsa to allow lua to be built with only one change
outside luaconf.h.
Add the final bit of lua glue to bring in liblua and plug into the
multiple interpreter framework, previously committed.
Add LOADER_LUA option, currently off by default.
Presently, this is an experimental option. One must opt-in to using
this by defining WITH_LOADER_LUA and WITHOUT_FORTH. It's been
lightly tested, so keep a backup copy of your old loader handy.
The menu code, coming in the next commit, hasn't been exhaustively
tested. A LUA boot loader is 60k larger than a FORTH one, which is
80k larger than a no-interpreter one. Subtle changes in size
may tip things past some subtle limit (the binary is ~430k now
when built with LUA). A future version may offer coexistance.
Bump FreeBSD version to 1200058 to mark the milestone.
Pedro Souza's 2014 Summer of Code project. Rui Paulo, Pedro Arthur,
Zakary Nafziger and Wojciech A. Koszek also contributed. Warner Losh
reworked it extensively into its current form.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Relnotes: Yes
MFC After: 1 month
Differential Review: https://reviews.freebsd.org/D14295
r328536 broke symbol loading on amd64 at least (and probably other
arches). r328826 contained the problem to ppc only by adding
pre-processors guards.
Fix this properly by moving the endianness conversion to separate
helper functions, and make the conversion more robust by using sizeof
instead of having to manually code the size of each field.
Finally list the fields in each structure in a macro in order to avoid
code repetition.
Sponsored by: Citrix Systems R&D
Reviewed by: kib emaste wma
Differential revision: https://reviews.freebsd.org/D14267
reflect what scripting language was compiled into the loader. I
anticipate that being able to find this out quickly from the OK prompt
will be useful in troubleshooting in the future.
4 space indentation with a mix of tabs and spaces is a hassle. Update
to project-standard hard-tabs with 8-space indentation in these files.
This matches the new code coming in better as well.
As a followup to r328101, ignore relocation tables for ELF object
sections that are not memory resident. For modules loaded by the
loader, ignore relocation tables whose associated section was not
loaded by the loader (sh_addr is zero). For modules loaded at runtime
via kldload(2), ignore relocation tables whose associated section is
not marked with SHF_ALLOC.
Reported by: Mori Hiroki <yamori813@yahoo.co.jp>, adrian
Tested on: mips, mips64
MFC after: 1 month
Sponsored by: DARPA / AFRL
The cross-endian loader change in r328536 (review D12422) broke symbol
loading on (at least) amd64 kernels. Temporarily paper over the issue
by restricting the cross-endian support to only powerpc, until a proper
fix arrives.
Submitted by: royger
This has never been installed. It was added to the tree disconnected
to the build in FreeBSD 5 (17 years ago) and has never been used as
far as I can tell. The desired improvements never really happened
(despite a couple minor cleanups along the way). It's relevance is
long past, so better to retire it.
