mtodo() accepts an mbuf and offset and returns a void * pointer to the
requested offset into the mbuf's associated data. Similar to mtod(),
no bounds checking is performed.
Reviewed by: imp, markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D43215
Correctly identify the active firmware in flash on adapters with
primary and secondary firmware region in flash.
Correctly identify the active NVRAM on adapters with primary
and secondary NVRAM region in flash.
Loading ispfw(4) moved from isp_pci_attach() to isp_reset().
Drop the reference to ispfw(4) after using it so one can kldunload(8) it.
New isp_load_ram() function to load either ispfw(4) or flash firmware
into RISC's RAM.
New functions to read data from flash. The old ones will be removed later.
A bunch of new helper functions to identify and validate active flash
regions for firmware, auxiliary and NVRAM.
Overhaul ISP_FW_* macros and make use of it when comparing firmware
versions. We can handle firmware versions up to 255.255.255.
Firmware load priority slightly changed:
For 27xx and newer adapters:
- load ispfw(4) firmware
- request (active) flash firmware information
- compare version numbers of ispfw(4) and flash firmware
- load firmware with highest version into RISC's RAM
- if loading ispfw(4) is disabled or failed - load firmware from flash
- if everything else fails use MBOX_LOAD_FLASH_FIRMWARE as fallback
For 26xx and older adapters nothing changed:
- load ispfw(4) firmware and load it into RISC's RAM
- if loading ispfw(4) is disabled or failed use MBOX_EXEC_FIRMWARE
- for 26xx a preceding MBOX_LOAD_FLASH_FIRMWARE is used
New read only sysctl(8)'s:
dev.isp.N.fw_version_run: the firmware version actually running
dev.isp.N.fw_version_ispfw: the firmware version provided by ispfw(4)
dev.isp.N.fw_version_flash: the (active) firmware version in flash
While here:
- firmware attribute handling/parsing reworked
+ renamed defines from ISP2400_FW_ATTR_* to ISP_FW_ATTR_*
+ changed values to match new handling/parsing
+ added some more attributes
- enable FLT support on 26xx based adapters
- log level adjustments
- new function return status codes (some for now, some for later use)
- some minor style changes
Tested and approved to work on real hardware with:
- Qlogic ISP 2532 (QLogic QLE2560 8Gb FC Adapter)
- Qlogic ISP 2031 (QLogic QLE2662 16Gbit 2Port FC Adapter)
- Qlogic ISP 2722 (QLogic QLE2690 16Gb FC Adapter)
- Qlogic ISP 2812 (QLogic QLE2772 32Gbit 2Port FC Adapter)
PR: 273263
Reviewed by: mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/877
MFC after: 1 month
Sponsored by: Technical University of Munich
Update 25xx firmware: version 8.8.207
Add 26xx firmware: version 8.8.231
Add 27xx firmware: version 9.12.0
Add 28xx firmware: version 9.12.1
Remove BUGS section from manpage as we now have firmware for
all supported controllers.
PR: 273263
MFC after: 1 month
Pull Request: https://github.com/freebsd/freebsd-src/pull/877
Sponsored by: Technical University of Munich
Some of the files are using outdated linceses.
Update the license to be 2023.
Approved by: cperciva (mentor)
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Instead of having to do:
PROGS= program1 program2
SRCS.program1= program1.c common.c
SRCS.program2= program2.c common.c
This can now be done instead:
PROGS= program1 program2
SRCS= common.c
SRCS.program1= program1.c
SRCS.program2= program2.c
This shouldn't effect any existing projects using <bsd.progs.mk>.
Reviewed by: imp, sjg
Pull Request: https://github.com/freebsd/freebsd-src/pull/766
Tidy the raggedness in the section that begins [44B]. As the line that begins
[KB] was previously tidied, now tidy the section to accommodate [BSDI] and
[TUHS]. Rewrap the section to fit the same number of columns.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/812
ISBN 0201547775 and International Article Number (EAN) 9780201547771 for
'A Quarter Century of UNIX' by Peter H. Salus.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/812
I previously forgot to mention these as they are set up through
contrib/arm-optimized/routines/string.
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Also mention missing rindex() entry, which is provided through
strrchr().
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42217
Building share/examples/tests with clang 18 results in a few warnings
like:
share/examples/tests/tests/plain/printf_test.c:67:6: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 17 [-Werror,-Wformat-truncation]
67 | if (snprintf(buffer, sizeof(buffer), "0123456789abcdef") != 16)
| ^
Since these tests are meant as an example of testing snprintf overflow,
suppress the warnings.
MFC after: 3 days
Python test scripts get processed (to add the `#! /usr/libexec/
atf_pytest_wrapper` shebang line), into a .xtmp file, and installed from
there. However, as there was no dependency of this .xtmp file on the
original file we kept reinstalling the .xtmp file, even if the original
had been edited already.
This could cause great confusion when debugging python test scripts.
Reviewed by: markj
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D43118
The tmpfs memory reserve defaulted to 4 MB, and other than that,
all of available memory + swap could be allocated to tmpfs files.
This was dangerous, as the page daemon attempts to keep some memory
free, using up swap, and then resulting in processes being killed.
Increase the reserve to a fraction of available memory + swap at
file system startup time. The limit is expressed as a percentage
of available memory + swap that can be used, and defaults to 95%.
The percentage can be changed via the vfs.tmpfs.memory_percent sysctl,
recomputing the reserve with the new percentage but the initial
available memory + swap. Note that the reserve can also be set
directly with an existing sysctl, ignoring the percentage. The
previous behavior can be specified by setting vfs.tmpfs.memory_percent
to 100.
Add sysctl for vfs.tmpfs.memory_percent and the pre-existing
vfs.tmpfs.memory_reserved to tmpfs(5).
PR: 275436
MFC after: 1 month
Reviewed by: rgrimes
Differential Revision: https://reviews.freebsd.org/D43011
knlist_clear() does not free knotes and so does not call fdrop(), so
remove the bit of the function description which claims otherwise. (The
knote will be dropped by the next queue scan, and it is at that point
that the fd reference will be dropped.)
MFC after: 1 week
Since TCPHPTS is now included in the GENERIC kernel, remove the
documented dependency of it from the tcp_rack(4) and tcp_bbr(4)
manual pages.
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D43084
Use mpr1 instead of ahd1 and ahci1 instead of ahc1. ahc and ahd haven't
been relevant for a while. Also update the transfer size HBAs can do
from from 64k to 1MB.
Sponsored by: Netflix
A deprecation notice was added to the bus_dma(9) man page by scottl@ in
September 2020 discouraging the use of filter functions. I've performed
an attentive check of all callers in the tree and everything that exists
today passes NULL for both filtfunc and filtarg. Thus, we should start
returning EINVAL if these arguments are non-NULL to prevent new usages
from popping up. Update the man page to be more clear about this.
The deprecation notice is present since at least 13.0-RELEASE, so this
is the appropriate step for the lifetime of 15, without actually
breaking the driver API. Stable branches will emit a warning instead.
This change enables the removal of a fair amount of unused complexity
across the various busdma implementations.
Reviewed by: jhb
MFC after: never
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42852
This was handy for some ad-hoc debugging and fits in with other
kmsan_check_*() routines which operate on some kind of data container.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Moving lrd sysctl to the tcp.sack branch, since LRD only works with SACK.
Remove the sockopt to programmatically control LRD per session.
Reviewed By: #transport, tuexen, rrs
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D42851
Lost Retransmission Detection was added as a
feature in May 2021, but disabled by default.
Enabling the feature by default to reduce the
flow completion time by avoiding RTOs when
retransmissions get lost too.
Reviewed By: tuexen, #transport, zlei
MFC after: 10 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D42845
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.
Sponsored by: Netflix
They are not executables and cannot be activated by kernel.
Reviewed by: emaste, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D42768
It is possible to reach this function from ddb via the "reset" command.
When this happens, we don't actually exit kdb, meaning we never execute
the latter steps of kdb_break() to restore the system state (e.g.
re-enable scheduler).
Therefore, we should not clear the kdb_active flag in this function, as
the debugger is still active. Put differently, kern_reboot() is not an
authority on kdb state, and should not touch it. The original motivation
for this assignment is not clear; I have checked thoroughly and I am
convinced it is not required by any reset code.
This fixes an edge case where a panic can be triggered during reset from
ddb:
1. Enter ddb via keyboard break sequence (KERNEL_PANICKED() == false &&
td->td_critnest > 0)
2. Execute the "reset" command
3. kern_reboot() sets kdb_active = false
4. A witness_checkorder() call via shutdown handler sees !kdb_active
and panics
Reviewed by: imp, markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42684
Replace int with either size_t or ssize_t (depending on context) in
order to support bit strings up to SSIZE_MAX bits in length. Since
some of the arguments that need to change type are pointers, we must
resort to light preprocessor trickery to avoid breaking existing code.
MFC after: 3 weeks
Sponsored by: Klara, Inc.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D42698
The tranditional build makes multiple passes through the tree.
The DIRDEPS_BUILD visits each directory only once per architecture,
thus makefiles should be able to everything they need in a single pass.
The use of TZS!= when doing make(*install*)
only works if the directory has previously been visited to do zoneinfo
since before the zoneinfo target is run TZS will be empty.
To fix this, have the zoneinfo target capture the list of files to
zoneinfo, and install-zoneinfo use that list.
Rename that target to zonefiles - since that is now what it does.
This is more efficient - we only gather the list of zones when it is
likely to have changed, and allows the makefile to do everything in a
single pass.
Reviewed by: stevek
Differential Revision: https://reviews.freebsd.org/D42624
